carbon conductive gold

carbon conductive gold, Total:174 items.

The international standard classification for "carbon conductive gold" includes: Carbon materials , Testing of metals , Chemical analysis of metals , Semiconducting materials , Electrical wires and cables , Cadmium, cobalt and their alloys .

The Chinese standard classification for "carbon conductive gold" includes: Oxide and elementary substance , Electric power system equipment installation testing , Semimetal and semiconductor material analysis method , Compound semiconductor material , Pipe fittings, clamps and seals , Cable and its accessory , Precious metals and its alloy analysis method .

Group Standards of the People's Republic of China

T/SDPEA 0021-2023 Guidelines for electrification construction of low-carbon marine ranching
T/CIET 107-2023 Guidelines for Carbon Footprint Evaluation of Industrial Motor Products
T/CEEIA 746-2023 Management Guidelines for carbon footprint and carbon label in zero-carbon and high energy efficiency district
T/CEEIA 747-2023 Guidelines for carbon assets development and trading in zero-carbon and high energy efficiency district
T/DZJN 77-2022 Guidelines for Carbon Footprint Evaluation of Lithium-ion Battery Products
T/ZJASE 021-2023 Assessment guidelines for green and low carbon enterprises—Combined heat and power generation
T/CAMMT 11-2019 Specification for Carbon Fiber Flexible Oriented Multi-Dimensional Weaving by Single Needle
T/CIET 206-2023 Guidelines for Carbon Footprint Assessment of Household Appliance Products
T/CIET 272-2023 Product Carbon Footprint Evaluation Guidelines for Electrolytic Aluminum
T/CIET 223-2023 Guidelines for Carbon Footprint Accounting and Evaluation of Electrolytic Copper Foil Products
T/CIET 190-2023 Guidelines for Carbon Footprint Evaluation of Solar Thin Film Cell Products
T/SZJL 8-2024 Determination of conductivity of carbon nanotube fiber and bundle
T/CI 020-2022 Technical guidelines for emission peak and carbon neutrality planning in cities
T/CMEPCA 001-2023 Guidelines for the evaluation of green low-carbon electro-mechanical products
T/ZDL 04-2022 Green Electricity Financial Evaluation Guidelines
T/CAS 696-2023 Guidelines for quantifying carbon emission reduction in electronic tendering and bidding activities
T/HEESA 0001-2024 Guidelines for Carbon Emission Accounting in the Construction Process of Power Transmission and Substation Projects
T/DZJN 90-2022 Guidelines for carbon footprint assessment of lead-acid battery products
T/CEEIA 737-2023 Guidance on carbon footprint assessment for electrical products—Small and medium motor
T/CIET 199-2023 Guidelines for Carbon Footprint Assessment of Hydrogen Fuel Cell Products
T/CEC 524.1～524.2-2021 Carbon fiber composite core wire supporting hardware technical conditions
T/CISA 347-2024 Low carbon steel wire rod for high conductivity wire
T/CEEIA 691-2023 Guidelines for carbon footprint assessment of electrical products wind turbines

Taiwan Provincial Standard of the People's Republic of China

CNS 4746-1988 Conductor Aluminium-Iron Alloy Rod
CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)

未注明发布机构

DIN EN 13604:2002 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
AS 2003:1991(R2016) Carbon and low alloy steel - Measurement of decarburization
CSA C22.2 No.227.2.1-2019 Liquid-tight flexible nonmetallic conduit
DIN EN 13604 E:2011-04 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
CSA C22.2 No.45.1-2022 Rigid metal conduits for electrical conduits — Steel

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33818-2017 Carbon nanotube conductive paste

Professional Standard - Ferrous Metallurgy

YB/T 6113-2023 Silicon carbide heat conductor for electric heating furnace

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1503-2014 Guidelines for Evaluation of Carbon Footprint of Household Appliances

Professional Standard - Electricity

DL/T 818-2002 Technical guide for carbide phase analysis of low alloy heat resistant steels

Professional Standard - Non-ferrous Metal

YS/T 978-2014 Carbon/carbon composites guide shield of single crystal furnace
YS/T 226.14-1994 Determination of carbon content in selenium - Combustion conductometric titration method

Professional Standard - Aviation

HB 4-118-1976 Metal conduit semi-flexible connection
HB 4-84-1996 Metal Conduit Flexible Connection
HB 4-84-1976 Metal Conduit Flexible Connection
HB 4-118-1996 Semi-flexible Connection of Metal Conduit
HB 4-84-1983 Flexible Connection of Metal Conduit
HB 4-118-1983 Metal conduit semi-flexible connection

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires-Measurement of resistivity of metallic conductive materials
GB/T 11067.5-1989 Silver--Determination of carbon content--Combustion-conductometric method

Defense Logistics Agency

DLA A-A-55810-1996 CONDUIT, METAL, FLEXIBLE
DLA A-A-55810 VALID NOTICE 1-2001 CONDUIT, METAL, FLEXIBLE
DLA A-A-50552 VALID NOTICE 3-2013 Fittings for Cable, Power, Electrical and Conduit, Metal, Flexible
DLA A-A-50552 VALID NOTICE 2-2008 FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE
DLA A-A-50552-1995 FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE
DLA A-A-50552 VALID NOTICE 1-2001 FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE
DLA A-A-55810 VALID NOTICE 2-2008 CONDUIT, METAL, FLEXIBLE
DLA DSCC-DWG-84191 REV H-2002 EXTRACTOR, ELECTRICAL CARD, METAL

SE-SIS

SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
SIS MNC 980 E-1984 Welding electrodes - Wire electrodes for gas metal arc welding of carbon steel, carbon manganese alloyed steel and microalloyed steel with increased yield strength - Summary
SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests

SCC

CSA C22.2 No.45.1-2007(R2022) Electrical Rigid Metal Conduit - Steel
AS C66.1:1955 Rigid metallic conduit for electrical wiring
CAN/CSA-C22.2 No.45.1-2004 Electrical Rigid Metal Conduit - Steel
CSA C22.2 No.45.1-2007(C2022) Rigid steel metal conduits for electrical conduits
NACE AMPP TM21451-2023 Evaluation of Carbon and Low-Alloy Steels for Resistance to Stress-Oriented Hydrogen-Induced Cracking (SOHIC)
CSA C22.2 No.56-1977(R1999) Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit
MIL MIL-DTL-32630-2019 CONDUCTOR, ELECTRICAL, STRANDED, UNINSULATED CARBON-BASED CONDUCTIVE FIBER, GENERAL SPECIFICATION FOR
BS 5135:1974 Specification for metal arc welding of carbon and carbon manganese steels
CSA C22.2 No.45-M1981-1981(R2008) Rigid Metal Conduits
CSA C22.2 No.45-1973 Rigid Metal Conduit
CSA C22.2 No.45-M1981-1981(C2008) Rigid metal conduits
AS A18:1940 Electrodes for metallic arc welding in mild steel construction
CSA C22.2 No.45.2-2008(R2018) Electrical rigid metal conduit - Aluminum, red brass, and stainless steel
MIL MIL-DTL-32630/3-2019 CONDUCTOR, ELECTRICAL, STRANDED, UNINSULATED CARBON-BASED CONDUCTIVE FIBER, -200 DEGREES CELSIUS to +200 DEGREES CELSIUS
BS 2709:1956 Specification for the electrical performance of semiconductor rectifiers (metal rectifiers)
AS/NZS 2053.7:1995 Conduits and fittings for electrical installations, Part 7: Rigid metal conduits and fittings
CAN/CSA-C22.2 No.227.2.1-2004(C2013) Liquid-Tight Flexible Non-Metallic Conduits
CSA C22.2 No.227.2-1993(C2003) Liquid-tight flexible non-metallic conduits
CAN/CSA-C22.2 No.227.2.1-2004(R2013) Liquid-Tight Flexible Nonmetallic Conduit
CSA C22.2 No.227.2-1993(R2003) Flexible Liquid-Tight Nonmetallic Conduit
AENOR UNE 26125:1957 FLEXIBLE METAL TUBES FOR PROTECTION OF ELECTRICAL CONDUCTORS. QUALITY STANDARD
CSA C22.2 No.227.2.1-2014 Liquid-tight flexible nonmetallic conduit
CSA C22.2 No.227.2-M1987-1987 Flexible Liquid-Tight Nonmetallic Conduit
CSA C22.2 No.227.2-1993(R1999) Flexible Liquid-Tight Nonmetallic Conduit
NS-EN 13604:2002 Copper and copper alloys — Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications

IN-BIS

IS 13525-1992 Flexible conductors for carbon brushes. Specification
IS 9595-1980 Recommendations for metal arc welding of carbon steel and carbon manganese steel
IS 6946-1973 Specification for flexible (flexible) non-metallic conduit for electrical installations
IS 13667-1993 Conductors for electronics and telecommunication applications: Tinsel conductors. Specification

German Institute for Standardization

DIN 43264-2:1976 Pantograph carbons; assembly dimensions

National Electrical Manufacturers Association（NEMA)

NEMA FB 2.10-2012 Selection and Installation Guidelines Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA C80.5-2015 Electrical Rigid Metal Conduit - Aluminum (ERMC-A)
NEMA FB 2.10-2013 Selection and Installation Guidelines For Fittings for Use With Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA FB 2.10-2003 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)
NEMA FB 2.10-2007 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)

Standard Association of Australia （SAA）

AS 2003:1991 Carbon and low alloy steel - Measurement of decarburization
AS/NZS 1553.1:1995 Covered electrodes for welding Part 1: Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP184-2021 Guideline for evaluating Bias Temperature Instability of Silicon Carbide Metal-Oxide-Semiconductor Devices for Power Electronic Conversion

American National Standards Institute （ANSI)

ANSI/UL 6-2010 Standard for Safety for Electrical Rigid Metal Conduit - Steel
ANSI/UL 1-2007 Flexible Metal Conduit (proposal dated 6-8-07)
ANSI/UL 6Aa-2003 Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel
ANSI C80.6-2005 Electrical Intermediate Metal Conduit (EIMC)

NEMA - National Electrical Manufacturers Association

NEMA FB 2.10-2000 Selection and Installation Guidelines for Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit@ Intermediate Metal Conduit@ and Electrical Metallic Tubing)
NEMA RN 2-1997 Packaging of Master Bundles for Electrical Rigid Metal Conduit (ERMC)—Steel@ Electrical Intermediate Metal Conduit (EIMC)—Steel@ and Electrical Metallic Tubing (EMT)—Steel
NEMA C80.6-2018 Electrical Intermediate Metal Conduit

Association Francaise de Normalisation

NF L52-150:1986 Aircraft equipment. Electric cables with aluminium alloy conductor. Characteristics.
NF A51-310*NF EN 13604:2013 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
NF A91-151*NF ISO 18535:2016 Diamond-like carbon films - Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
NF A95-482*NF EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method

British Standards Institution (BSI)

BS 1400:1985 Specification for copper alloy ingots and copper alloy and high conductivity copper castings
BS EN 13604:2013 Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
BS ISO 13832:2013 Aerospace. Wire, aluminium alloy and copper-clad aluminium conductors. General performance requirements

Canadian Standards Association (CSA)

CSA C22.2 No.45.1-04-2004 Electrical Rigid Metal Conduit - Steel Update 1

Underwriters Laboratories (UL)

UL 1-2000 Flexible metal conduit
UL 6-2000 Rigid metal conduit
UL 1-2020 Flexible metal conduit
UL 6-1997 Rigid metal conduit
UL 6 BULLETIN-2001 UL Standard for Safety Electrical Rigid Metal Conduit – Steel
UL 6 BULLETIN-2004 UL Standard for Safety Electrical Rigid Metal Conduit – Steel
UL 6-2022 UL Standard for Safety Electrical Rigid Metal Conduit – Steel
UL 6 BULLETIN-2003 UL Standard for Safety Electrical Rigid Metal Conduit – Steel

Korean Agency for Technology and Standards (KATS)

KS C 8422-2020 Flexible metal conduits
KS C 8422-2005(2020) Flexible metal conduits
KS C 8422-1995 Flexible metal conduits
KS C 8458-1995 Boxes for rigid metal conduits
KS C 8458-1999 Boxes for rigid metal conduits
KS C 8459-1995 Fittings for flexible metal conduits
KS C 8459-2020 Fittings for flexible metal conduits
KS C 8460-2020 Fittings for rigid metal conduits
KS C 8460-1994 Fittings for rigid metal conduits
KS C 8459-2005 Fittings for flexible metal conduits
KS D 2717-2008 Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
KS L 1630-2021 Test methods for electrical conductivity of conductive fine ceramics

Japanese Industrial Standards Committee (JISC)

JIS C 8309:1999 Pliable metal conduits
JIS C 8330:1999 Fittings for rigid metal conduits
JIS C 8330:1991 Fittings for rigid metal conduits
JIS C 8350:1999 Fittings for pliable metal conduits
JIS C 8336:1991 Boxes for rigid metal conduits

United States Navy

NAVY A-A-59827-2009 TOPSIDE CONDUIT (FLEXIBLE) AND CONDUIT FITTINGS, ELECTRICAL: COMPOSITE BASED (NON-METALLIC)

HU-MSZT

MSZ 8281-1979 Iron-Carbon Alloy Resistance and Cutting

GSO

GSO ISO 18535:2017 Diamond-like carbon films -- Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

European Committee for Standardization (CEN)

prEN 440-1990 Classification of wire electrodes and deposits for gas metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels
prEN 499-1991 Classification of covered electrodes for manual metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels

International Federation of Trucks and Engines

NAVISTAR TMS 1023-1983 VOID - Alloy Steel - Medium Carbon, Medium Hardenability

American Welding Society (AWS)

AWS GTW-2005 Guide to Weldability Carbon and Low Alloy Steels

American Society for Testing and Materials (ASTM)

ASTM A288-18 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A288-91(1998) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A288-91(2018) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM D4388-02 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-08 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-97 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4388-13 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

GM North America

GMP.PA12.011-2000 Nylon 12 - 10% Glass, 10% Carbon Fiber Reinforced, Conductive Revision A
GM GMP.PA12.011-2000 Nylon 12 - 10% Glass, 10% Carbon Fiber Reinforced, Conductive

International Organization for Standardization (ISO)

ISO 13832:2013 Aerospace - Wire, aluminium alloy and copper-clad aluminium conductors - General performance requirements

Military Standards (MIL-STD)

DOD A-A-53506-1988 WIRE, NONELECTRICAL, (PLATINUM ALLOY)

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-126-2013 In-Line@ Spring-Assisted@ Center-Guided Check Valves (Carbon@ Alloy Steel@ Stainless Steel@ & Nickel Alloys)

Society of Automotive Engineers (SAE)

SAE AMS2658C-2009 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
SAE J1268-1995 Hardenability Bands for Carbon and Alloy H Steels
SAE J1268-1981 HARDENABILITY BANDS FOR CARBON AND ALLOY H STEELS
SAE J1268-2010 Hardenability Bands for Carbon and Alloy H Steels
SAE J2551/2-2018 Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
SAE J2551/2-2013 Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements

IT-UNI

UNI 7358-1974 Metal carburizing treatment. Aerated salt nitriding

AWS - American Welding Society

GTW-2005 Guide to Weldability Carbon and Low Alloy Steels
C1.4M/C1.4-1999 Specification for Resistance Welding of Carbon and Low-Alloy Steels

U.S. Air Force

AIR FORCE MIL-STD-1537 C-2002 ELECTRICAL CONDUCTIVITY TEST FOR VERIFICATION OF HEAT TREATMENT OF ALUMINUM ALLOYS EDDY CURRENT METHOD
AIR FORCE MIL-STD-1537 C VALID NOTICE 1-2008 Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method

SAE - SAE International

SAE J1268-1980 Hardenability Bands for Carbon and Alloy H Steels
SAE J1268-1993 Hardenability Bands for Carbon and Alloy H Steels
SAE J1268-1988 Hardenability Bands for Carbon and Alloy H Steels
SAE J2551-2-2013 Recommended Practices for Fluid Conductor Carbon@ Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
SAE J2551-2-2018 Recommended Practices for Fluid Conductor Carbon@ Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements

PL-PKN

PN H04782-10-1986 Chemical analysis of nickel alloy for electronic Determination of carbon

Indonesia Standards

SNI 07-0075-2006 Low carbon steel wire rods for electrical welded core wire

GOST

GOST R ISO 2360-2021 Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-126-2013 In-Line, Spring-Assisted, Center-Guided Check Valves (Carbon, Alloy Steel, Stainless Steel, & Nickel Alloys)

RO-ASRO

STAS 10807-1976 PROCEDURE FOR DERIVING AND VERIFYING,THE ELEVATED TEMPERATURE YIELD STRESS PROPERTIES FOR CARBON AND LOW ALLOY STEELS FOR PRESSURE PURPOSES