Membranes are classified by material

Membranes are classified by material, Total:78 items.

The international standard classification for "Membranes are classified by material" includes: Reinforced plastics , Iron and steel products in general , Textile glass materials .

The Chinese standard classification for "Membranes are classified by material" includes: Fibre reinforced composites , Steel and iron products in general , Glass fibre .

Professional Standard - Building Materials

JC/T 491-1992 Classification method of reinforced plastics extruded sections on the basis of constituents
JC/T 491-1991 Method of classifying reinforced plastic pultruded profiles by components
JC/T 491-2010 Method for classifying reinforced plastic pultruded shapes according to composition

Taiwan Provincial Standard of the People's Republic of China

CNS 8641-1988 Roof Coating for Waterproofing (Ropylene Rubber Type)
CNS 8643-1988 Roof Coating for Waterproofing(Acrulic Resin Type)
CNS 8642-1988 Roof Coating for Waterproofing(Chloroprene Rubber Type)
CNS 8644-1988 Roof Coating for Waterproofing(Rubber Asphalt Type)

Professional Standard - Commodity Inspection

SN/T 2275-2009 Rules for the Inspection of Food Contact Materials - Paper and Regenerated Cellulose Materials

Professional Standard - Railway

TB/T 2844-1997 Test for Fire Performance of Railway Vehicle Material - According to Material Category and Application Situation

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25042-2024 Fiberglass membrane material for membrane structure
GB/T 13304.1-2008 Steels classification - Part 1: Classification of according to chemical composition

Spanish Association for Standardization (UNE)

UNE 61001:1975 REFRACTORY MATERIALS. DEFINITION AND CLASSIFICATION BY ITS CHEMICAL COMPOSITION
UNE 104-402-1990 Waterproof covering membrane for asphalt materials and modified asphalt materials. Classification, delegation and composition
UNE 56-414-1988 Classification of wood biological protection agents by properties
UNE 201010:2015 Fire reaction test of low voltage electrical accessories. Classification according to the radiation test applicable to rigid materials
UNE 56 704 Classification of wood plywood by face
AENOR UNE 111916:1991 WHEELCHAIR. CLASSIFICATION BY TYPE BASED ON APPEARANCE CHARACTERISTICS

Association Francaise de Normalisation

NF EN 61100:1992 Classification of liquid insulation according to fire point and lower calorific value
NF T13-003:1967 Muscovite mica blocks, thins and films. Classification by size.
NF EN 14081-2/IN1:2022 Wooden structures - Structural wood with a rectangular section classified for its strength - Part 2: mechanical classification by machine; additional requirements for type testing
NF V45-058:1988 Cephalopoda. Classification by size.

American Society for Testing and Materials (ASTM)

ASTM D5740-18 Standard Guide for Writing Material Standards in the Classification Format
ASTM D5491-03 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
ASTM D5491-98 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
ASTM D6881/D6881M-03(2008)e1 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density

German Institute for Standardization

DIN 55944:2011-12 Coloring materials - Classification according to coloristic and chemical aspects
DIN 55944:2003-11 Colouring materials - Classification according to coloristic and chemical aspects
DIN 7748:1972 Plastics moulding materials; unplasticized polyvinylchloride (PVC) moulding materials; classification and designation according to characteristic properties
DIN SPEC 91446:2021-12 Classification of recycled plastics by Data Quality Levels for use and (digital) trading
DIN 7724 Beiblatt:1972 Simplified summary of the classification of polymer materials according to the effect of temperature on their mechanical behavior
DIN EN 975-2:2004 Sawn timber - Appearance grading of hardwoods - Part 2: Poplars; German version EN 975-2:2004
DIN EN 519:1996 Construction timber for load-bearing purposes —— Sorting DIN requirements for mechanically sorted construction timber according to strength and for sorting machines
DIN 15001-1:1973-11 Cranes; Vocabulary, classification according to type
DIN 16905:1975 Inner diameter of core of plastic film, artificial leather and similar sheet materials

Gosstandart of Russia

GOST 9434-2023 Coal coke. Classification by size of pieces
GOST 8865-1970 Electrical insulating materials for electrical machines, transformers and devices. Classification by heat resistance
GOST R ISO 15792-3-2024 Welding consumables. Test methods. Part 3. Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
GOST R 71383-2024 Aircrafts. Classification of mass
GOST R 59608.3-2021 Optics and photonics. Optical coatings. Part 3. Classification by resistance to external factors and test methods
GOST R 54384-2011 Steel. Definition and classification by chemical composition and classes of quality
GOST 34481-2018 Mechanical locks. Classification by design
GOST R 70553-2022 Hard coal coke. Classification by piece sizes

Standard Association of Australia （SAA）

AS C320:1958 Classification of insulating materials for electrical machinery and apparatus on the basis of thermal suitability in service
AS 1580.107.8:1979 Paints and related materials - Methods of test, Method 107.8: Application of paint at a nominated spreading rate by determination of wet film mass (brush application)

Bureau of Indian Standards

IS 5018-1968 Classification of hard coals by type
IS 4794-2-1986 Push button switches: Part 2 Push button switches, Type 1

Indonesia Standards

SNI ISO 2426.2:2008 Kayu lapis - Klasifikasi berdasarkan penampilan permukaan - Bagian 2: Kayu daun lebar
SNI ISO 2426.3:2008 Kayu lapis - Klasifikasi berdasarkan penampilan permukaan - Bagian 3: Kayu daun jarum

European Committee for Standardization (CEN)

EN 975-2:2004 Sawn timber - Appearance grading of hardwoods - Part 2: Poplars
prEN 599-1-1991 Durability of wood and derived materials; performances of wood preservative as determined by biological tests; part 1: specifications according to hazard class

Ente Nazionale Italiano di Unificazione

UNI SPERIMENTALE 8898-2:1987 Polimeric waterproof sheets. Elastomeric sheets without reinforcement. Characteristics and acceptance limits.
UNI 9198:1988 Plastic stud fasteners. Groove type.
UNI 9717:1990 Solid mineral fuels. Classification by rank, sampling and analysis.
UNI 9197:1988 Plastic stud fasteners. Hole type.
UNI EN 13242:2004 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
UNI EN 14035-2:2005 Fireworks - Part 2: Categorisation
UNI 8520-22:2002 Aggregates for use in concrete - Determination of potential reactivity of alcali in aggregates
UNI SPERIMENTALE 8520-4:1984 Aggregates for use in concretes. Petrographic examination.

Magyar Szabványügyi Testület

MSZ 13557/1-1972 Floor material testing methods. group by definition

Standards Norway

NS-EN 13017-2:2000 Solid wood panels — Classification by surface appearance — Part 2: Hardwood

Swedish Institute for Standards

SS-EN 13017-1:2001 Solid wood panels - Classification by surface appearance - Part 1: Softwood
SS-EN ISO 18451-2:2018 Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO 18451-2:2018)
SIS SS 81 81 03-1984 Windows — Classification with regard to function

Danish Standards Foundation

DANSK DS/EN 13017-1:2001 Solid wood panels - Classification by surface appearance - Part 1: Softwood

IX-IX-ISO

ISO/TS 5617:2025 Tea — Classification by chemical composition

Portuguese Institute of Quality

NP 1978-1985 fish. Lula. Sort by size
NP 1976-1985 fish. Big head fish. Sort by size
NP 2101-1985 fish. Snapper graded by size

Polski Komitet Normalizacyjny (PKN)

PN O79804-1991 Plastics transport packages.Sacks of plastics film.Classification

American National Standards Institute （ANSI)

ANSI/ASTM D5491:1998 Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
ANSI/ASAE S572.3-2020 Spray Nozzle Classification by Droplet Spectra

International Organization for Standardization (ISO)

ISO 7930:1986 Wheelchairs; Type classification based on appearance characteristics
ISO 67:1981 Muscovite mica blocks, thins and films - Grading by size

American Society of Mechanical Engineers (ASME)

ASME STP-PT-096-2022 Elevated Temperature Material Property Compilation for Design-By Analysis

Argentine Institute of Standardization

IRAM 17 001-1958 Carbon is classified by range
IRAM 17 002-1958 Carbon is classified by grade

British Standards Institution (BSI)

BS 4640:1970 Classification of metalworking machine tools by types

Belgian Standards Institute

NBN S 32-106-1984 Agar impression material

Others: Classification of membrane materials,Membrane material classification,Membranes are classified by material