lithium metal cycle

lithium metal cycle, Total:184 items.

The international standard classification for "lithium metal cycle" includes: Mechanical testing of metals , Corrosion of metals , Other methods of testing of metals , Power transmission and distribution lines , Powder metallurgy , Other non-ferrous metals and their alloys , Wood-based panels , Other products of non-ferrous metals .

The Chinese standard classification for "lithium metal cycle" includes: Metal mechanical property test method , Metal chemical property test method , Furniture in general , Power station equipment automation devices , Metal physical and chemical property test method in general , Metal physical property test method , Metal and alloy powder , Artificial board , Rare light metals and their alloys .

Group Standards of the People's Republic of China

T/CISA 071-2020 Metallic materials—Sheet and strip—Axial-loading constant-amplitude cycle fatigue testing method
T/CIAPS 0012-2021 The accelerate cycle test methods for life of LiFePO4 batteries
T/ATCRR 61-2024 Test method for typical causes of thermal runaway at different cycle life stages for power lithium-ion battery
T/CSTM 00364-2021 Clad metal strips for electrical connector of lithium-ion batteries
T/SPSTS 017-2021 Clad metal strips for electrical connector of lithium-ion batteries
T/TMAC 145-2025 Technical specification for cycle life of lithium-ion power batteries for new energy vehicles
T/CASAS 015-2022 Power cycling test method for silicon carbide metal-oxide-semiconductor field-effect-transistor（SiC MOSFET）
T/CEEMA 008-2022 The technical supervision guidelines for metal in gas-steam combined cycle power plants
T/GERS 0034-2023 Test procedure for fast charging cycle performance of lithium-ion traction battery
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
T/CIECCPA 021-2023 Technical specification for cleaner production of retired lithium batteries cyclic utilization
T/CIAPS 0013-2021 Selection test of accelerated factor for cycle life of LiFePO4 batteries

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 42261-2022 Metallic and other inorganic coatings—Test method of cyclic heating for thermal-barrier coatings under temperature gradient
GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Thermal-cold cycling method
GB/T 20854-2025 Corrosion of metals and alloys—Accelerated testing involving cyclic exposure to salt mist, “dry”and“wet”conditions
GB/T 45328-2025 Determination of magnetic foreign metal particles in lithium carbonate, lithium hydroxide monohydrate and lithium chloride—Cleanliness meter test method
GB/T 24195-2009 Corrosion of metals and alloys—Accelerated cyclic tests with exposure to acidified salt spray dryand wet conditions
GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
GB/T 42260-2022 Electrochemical performance test of lithium iron phosphate—Test method for cycle life
GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide - Test method for discharge plateau capacity ratio and cycle life
GB/T 15248-2008 The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials
GB/T 15248-1994 The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials
GB/T 20854-2007 Corrosion of metals and alloys—Accelerated testing involving cyclic exposure to salt mist “dry”and “wet” condition
GB/T 2317.3-2000 Heat cycle tests for electric power fittings
GB/T 38231-2019 Corrosion of metals and alloys—Test method for thermal-cycling exposure oxidation testing under high-temperature corrosion conditions for metallic materials
GB/T 20120.1-2006 Corrosion of metals and alloys—Corrosion fatigue testing—Part 1:Cycles to failure testing

Professional Standard - Forestry

LY/T 3041-2018 Test methods for cyclic testing of joints made with metal fasteners of timber structures

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1476-2014 Test procedure for cycle life of lithium-ion battery modules for electric vehicles

Professional Standard - Non-ferrous Metal

YS/T 1543-2022 The norm of energy consumption per unit production of lithium
YS/T 905-2013 Lithium-boron Alloy

Professional Standard - Electron

SJ/T 11797-2022 General specification of lithium metal secondary cells and batteries

Hebei Provincial Standard of the People's Republic of China

DB13/T 5983-2024 Cleaning treatment and cleaning agent recycling in lithium-ion battery electrolyte production

Professional Standard - Light Industry

QB/T 8097-2024 Air circulation fan

Spanish Association for Standardization (UNE)

UNE 135-320-1991 Metal cycle sign. Test characteristics and methods
UNE 135-310-1991 Metal cycle sign. Inlay and printing of galvanized steel sheets
UNE 135-321-1991 Metal cycle sign. Aluminum products are obtained by pressing. Production, characteristics and test methods
AENOR UNE-EN 14868:2006 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water circulation systems
UNE-EN ISO 11782-1:2009 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998)
AENOR UNE-EN ISO 11782-1:2009 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998)
UNE-EN 14868:2006 Protection of metallic materials against corrosion - Guidance on the assesment of corrosion likelihood in water circulation systems
UNE-EN ISO 16151:2019 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018)
AENOR UNE-EN ISO 16151:2009 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005)
UNE-EN ISO 16151:2009 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005)
UNE-EN 15496:2008 Cycles - Requirements and test methods for cycle locks

Japanese Industrial Standards Committee (JISC)

JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
JIS Z 2282:1996 Method of cyclic oxidation testing at elevated temperatures for metallic materials
JIS H 8452:2008 Testing method for thermal cycle resistance of oxidation resistant metallic coatings
JIS H 2109:2006 Classification standard of copper and copper alloy recycle materials

British Standards Institution (BSI)

BS ISO 11782-1:1998 Corrosion of metal and alloys. Corrosion fatigue testing. Cycles to failure testing
BS EN ISO 11782-1:2008 Corrosion of metals and alloys. Corrosion fatigue testing. Cycles to failure testing
BS ISO 13573:2012 Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
11/30210857 DC BS ISO 13573. Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
BS ISO 4215:2022 Corrosion of metals and alloys. Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
BS ISO 16151:2005 Corrosion of metals and alloys. Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
BS ISO 14993:2018 Corrosion of metals and alloys. Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
21/30411253 DC BS EN ISO 4215. Corrosion of metals and alloys. Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
BS ISO 16151:2006 Corrosion of metals and alloys - Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
BS EN ISO 16151:2018 Corrosion of metals and alloys. Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
BS EN 15194:2017+A1:2023 Cycles. Electrically power assisted cycles. EPAC Bicycles
25/30495951 DC BS ISO 14993 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
BS ISO 59040:2025 Circular economy. Product circularity data sheet
BS ISO 59020:2024 Circular economy. Measuring and assessing circularity performance
BS EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
23/30439281 DC ISO 59040 Circular economy. Product circularity data sheet
PD CEN/TS 17831:2023 Cycles. Electrically power assisted cycles. Anti-tampering measures
BS EN ISO 13123:2011 Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient
BS EN 17404:2022 Cycles. Electrically power assisted cycles. EPAC Mountain bikes

DE-VDA

VDA 233-102-2013 Cyclic corrosion testing of materials and components in automotive construction

Association Francaise de Normalisation

NF A03-406:1993 Metal products - Fatigue under variable amplitude loading - The Rainflow method of cycle counting
NF A05-004*NF ISO 4215:2022 Corrosion of metals and alloys - Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
NF A05-116*NF EN ISO 16151:2018 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
NF X30-904*NF ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
NF ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
NF A05-414*NF EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems

American Society for Testing and Materials (ASTM)

ASTM STP 165-1954 SYMPOSIUM ON EFFECT OF CYCLIC HEATING AND STRESSING ON METALS AT ELEVATED TEMPERATURES
ASTM F2934-12 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
ASTM D7206/D7206M-06(2012)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206/D7206M-06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206-06 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM F1800-19 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F1440-92(2002) Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion

GCC Standardization Organization

GSO ISO 13573:2015 Corrosion of metals and alloys -- Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
GSO ISO 11782-1:2013 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing
GSO ISO 16151:2016 Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
GSO ISO 13123:2015 Metallic and other inorganic coatings -- Test method of cyclic heating for thermal-barrier coatings under temperature gradient
GSO ASTM F1800:2021 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
GSO ISO 14188:2015 Metallic and other inorganic coatings -- Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13573:2017 Corrosion of metals and alloys -- Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
BH GSO ISO 11782-1:2016 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing
BH GSO ISO 16151:2017 Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
BH GSO ISO 13123:2016 Metallic and other inorganic coatings -- Test method of cyclic heating for thermal-barrier coatings under temperature gradient

Underwriters Laboratories (UL)

UL 3601-2024 Standard for Measuring and Reporting Circularity of Li-ion and Other Secondary Batteries

International Organization for Standardization (ISO)

ISO 11782-1 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
ISO 13573:2012 Corrosion of metals and alloys - Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
ISO 11782-1:1998 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
ISO 14993:2001 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
ISO 14993:2018 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
ISO/DIS 59040:2023 Circular economy — Product circularity data sheet
ISO/CD 59040 Circular Economy — Product Circularity Data Sheet
ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
ISO/DIS 59020 Circular economy — Measuring and assessing circularity
ISO 59040:2025 Circular economy — Product circularity data sheet
ISO 59020:2024 Circular economy — Measuring and assessing circularity performance
ISO/FDIS 59020:2023 Circular economy — Measuring and assessing circularity performance
ISO 13123:2011 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient

PL-PKN

PN H04327-1974 Fa?ique testing of metals Tension-compression test with constant cycle load

Korean Agency for Technology and Standards (KATS)

KS D ISO 11782-1-2017 Corrosion of metals and alloys － Corrosion fatigue testing － Part 1: Cycles to failure testing
KS D ISO 11782-1-2022 Corrosion of metals and alloys－Corrosion fatigue testing－Part 1：Cycles to failure testing
KS D ISO 11782-1-2017(2022) Corrosion of metals and alloys － Corrosion fatigue testing － Part 1: Cycles to failure testing
KS D ISO 14993-2017(2022) Corrosion of metals and alloys－Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions
KS D ISO 14993-2017 Corrosion of metals and alloys－Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions
KS D ISO 14993:2017 Corrosion of metals and alloys－Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions
KS D ISO 14993:2003 Corrosion of metals and alloys－Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions
KS D ISO 14993-2023 Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

Danish Standards Foundation

DANSK DS/EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
DS/EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
DS/EN ISO 16151:2008 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions
DANSK DS/ISO 59040:2025 Circular economy – Product circularity data sheet
DANSK DS/EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
DANSK DS/EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient
DS/EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient
DS/EN 15496:2008 Cycles - Requirements and test methods for cycle locks
DANSK DS/ISO 59020:2024 Circular economy – Measuring and assessing circularity performance
DS/EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems

German Institute for Standardization

DIN EN ISO 11782-1:2008-08 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998); German version EN ISO 11782-1:2008
DIN EN ISO 11782-1 E:2007-11 Draft Document - Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998); German version prEN ISO 11782-1:2007
DIN EN 14868:2005-11 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; German version EN 14868:2005
DIN 6406:1966-02 Loops
DIN EN ISO 16151:2018-10 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018); German version EN ISO 16151:2018
DIN EN ISO 11782-1 E:2007 Draft Document - Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998); German version prEN ISO 11782-1:2007
DIN EN ISO 16151:2008-07 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions (ISO 16151:2005)
DIN EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; English version of DIN EN 14868:2005
DIN EN ISO 13123:2012-04 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011); German version EN ISO 13123:2011

Institute of Electrical and Electronics Engineers (IEEE)

NFPA (Fire) 485 Storage, Handling, Processing, and Use of Lithium Metal

Ente Nazionale Italiano di Unificazione

UNI EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
UNI 10214:1993 Road vehicles. Painting of various metal parts. Ultraviolet light/humidity alternato cycling test.
UNI EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
UNI EN ISO 16151:2018 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
UNI EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
UNI EN 15664-1:2014 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
UNI EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4733-2004 Simulation and Performance Analysis of Lithium Bromide/Water for Absorption Heat Transformer Cycle Systems
ASHRAE CH-99-10-6-1999 Corrosion Inhibition in Lithium Bromide Absorption Fluid for Advanced and Current Absorption Cycle Machines

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 6692:2008 Cycles - Marking of cycle components
OS GSO ISO 16151:2016 Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
OS GSO ISO 13123:2015 Metallic and other inorganic coatings -- Test method of cyclic heating for thermal-barrier coatings under temperature gradient

Standards Norway

NS-EN ISO 11782-1:2008 Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing (ISO 11782-1:1998)
NS-EN 14868:2005 Protection of metallic materials against corrosion — Guidance on the assessment of corrosion likelihood in closed water circulation systems
NS-EN ISO 16151:2008 Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005)
NS-ISO 59020:2024 Circular economy - Measuring and assessing circularity performance

Lithuanian Standards Office

LST EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998)
LST EN ISO 16151:2008 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005)
LST EN 15496-2008 Cycles - Requirements and test methods for cycle locks
LST EN 14868-2006 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems

European Committee for Standardization (CEN)

EN ISO 13123:2011 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
CEN EN ISO 16151:2008 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005)
EN 3987:2009 Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems

American National Standards Institute （ANSI)

ANSI/ASTM F2934:2012 Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications

Swedish Institute for Standards

SS-ISO 14993:2018 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions (ISO 14993:2018, IDT)
SS-EN 15496:2008 Cycles - Requirements and test methods for cycle locks
SS-EN ISO 16151:2018 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018)
SS-ISO 16151:2005 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions (ISO 16151:2005,IDT)

Standard Association of Australia （SAA）

AS 2331.3.12:2006(R2017) Methods of test for metallic and related coatings - Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal
AS 2331.3.12:2006 Methods of test for metallic and related coatings - Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal
AS ISO 59020:2024 Circular economy - Measuring and assessing circularity performance

Defense Logistics Agency

DLA MIL-D-6055 D-1987 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES)
DLA MIL-D-6055 D (1)-1989 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES)
DLA MIL-D-6055 D NOTICE 3-2001 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES)
DLA MIL-D-6055 D REINST NOTICE 2-2001 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES)

European Association of Aerospace Industries

AECMA PREN 3874-1998 Aerospace Series Test Methods for Metallic Materials Constant Amplitude Force-Controlled Low Cycle Fatigue Testing Edition P 1
AECMA PREN 3874-1995 Aerospace Series Test Methods for Metallic Materials Constant Amplitude Force-Controlled Low Cycle Fatigue Testing
AECMA PREN 3988-1998 Aerospace Series Test Methods for Metallic Materials Constant Amplitude Strain-Controlled Low Cycle Fatigue Testing Edition P 1

Aerospace Industries Association

AIA NAS 1940-1996 Grommet, Nonmetallic

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 1940-1996 Grommet, Nonmetallic

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1940-1996 Grommet@ Nonmetallic

CZ-CSN

CSN ONA 30 9841-1964 Cycle pujnps.

SCC

SPC GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide -- Test method for discharge plateau capacity ratio and cycle life (TEXT OF DOCUMENT IS IN CHINESE)

Cooling Technology Institute

CTI PTB-110-1977 Recirculation

GM North America

GM GM9505P-1999 Automotive Environmental Cycles

American Water Works Association (AWWA)

AWWA JAW48147 Journal AWWA — Legislation/Regulation -- State Revolving Fund Outlook

IN-BIS

IS 4066-1967 Specification for metal hooks, clips and rings