dpp 100 type

dpp 100 type, Total:425 items.

The international standard classification for "dpp 100 type" includes: Rivets , Dividing and tool-workpiece holding devices .

The Chinese standard classification for "dpp 100 type" includes: Technical management , Technical management , Technical Management , Fasteners , Measuring devices .

Professional Standard - Electron

SJ 2195-1982 CDL-100/L filter chokes using C-cores (inputted by inductance)
SJ 20468-1994 Low-power rotating joint of Aluminum waveguide Type BGJ-100-3/4
SJ 20466-1994 3dB slot hybrid of Aluminum waveguide Type BQF-100-1
SJ 20469-1994 Magic T of aluminum waveguide,Type BTS-100-1
SJ 20465-1994 Orthogonal mode coupler of aluminum waveguide,Type BZS-100-1
SJ 20467-1994 High-power rotating joint of Aluminum waveguide Type BGJ-100-1/2
SJ 1596-1980 Spiral anode X-ray tubes, Type XD51-20. 40/100 and XD51-20. 40/125
SJ 2194-1982 CDL-100/C filter chokes using C-cores (inputted by capacitance)

Military Standard of the People's Republic of China-General Armament Department

GJB 381.5-1987 100° countersunk head tensile ring groove rivets
GJB 381.3-1987 100° countersunk head shear-resistant ring groove rivets
GJB 133.1-1986 Brushed type 100° countersunk head blind rivets
GJB 857.1-1990 100° countersunk head tensile titanium alloy ring groove rivets
GJB 134.2-1986 Polished rod tolerance zone R6 shear-resistant 100° countersunk head high locking bolt
GJB 133.9-1986 Brushed type 100° countersunk head blind rivet set
GJB 133.2-1986 Brushed type 100° countersunk head blind rivets
GJB 134.3-1986 Polished rod tolerance zone f9 shear-resistant 100° countersunk head high locking bolt

Professional Standard - Aviation

HB 8564-2019 Rivet, blind, 100° flush shear head, mechanically locked spindle, bulbed, Monel alloy, for aircraft
HB 7072-1994 GH2132 Bulge Type 100° Countersunk Head Core Pulling Screw
HB 8373-2013 Titanium alloy light tensile type 100° countersunk head high lock bolt
HB 8368-2013 Titanium alloy light shear resistant 100° countersunk head high lock bolt
HB 7185-1995 Tensile Type 100° Countersunk Head Hi-lock Nut
HB 6849-1993 100° Pull Type Countersunk Tensile Titanium Alloy Lockbolts
HB 7722-2002 100° flush head mechanical locked spindle and bulded aluminum rivet
HB 8380-2013 Titanium alloy interference type 100° countersunk head bolt
HB 8563-2019 Rivet, blind, 100° flush head, mechanically locked spindle, bulbed, Monel alloy, for aircraft
HB 6850-1993 100° Upsetting Countersunk Tensile Titanium Alloy Lockbolts
HB 7724-2002 100° flush head mechanical locked spindle and bulbed steel rivet
HB 7653-1999 100° Countersunk Head Shear Resistance Spike Bolt
HB 7034-1994 100° Countersunk Bolts for Shear-Resistant Interference Fit Connections

Professional Standard - Aerospace

QJ 1725-1989 Technical Specification for Upsetting-rivet Type Tensile Ring Groove Rivet with 100° Countersunk Head
QJ 448-1978 Non-full type smooth plug gauge handle with handle (D=100～180)
QJ 1160.1-1987 Type and Dimension of Plain Limit Gauge - Circular Ring Gauge (D>1~100)

未注明发布机构

VDE 0108-100 E*DIN VDE 0108-100:2007-08
VDE 0603-100-2020*DIN VDE 0603-100:2020
VDE 0108-100 E*DIN VDE 0108-100:2005-10
VDE 0745-100-1987*DIN VDE 0745-100:1987
VDE 0493-100 E*DIN VDE 0493-100:2008-09
VDE 0819-100-1998*DIN VDE 0819-100:1998
VDE 0100-100-2002*DIN VDE 0100-100:2002
VDE 0105-100-2000*DIN VDE 0105-100:2000
VDE 0100-100 E*DIN VDE 0100-100:2021-09
VDE 0671-100 E*DIN EN 62271-100:2018-11
VDE V 0124-100 E*DIN VDE 0124-100:2019-09
DIN SPEC 33441-100 DIN ISO TR 9241-100:2010-09
VDE 0887-100 E*DIN VDE 0887-100:2008-02
VDE 0660-100-1992*DIN VDE 0660-100:1992
VDE 0105-100-2005*DIN VDE 0105-100:2005
VDE 0106-100 DIN VDE 0106-100-1983*DIN 57106-100:1983
VDE 0100-100 DIN VDE 0100-100-1982*DIN 57100-100:1982
VDE 0105-100-1997*DIN VDE 0105-100:1997
VDE 0671-100-2004*DIN EN 62271-100:2004
VDE 0832-100 E*DIN VDE 0832-100:2009-07
VDE 0298-100-1992*DIN VDE 0298-100:1992
DIN 8075 E:2017-08 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing
DIN 8074:1987 Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions
VDE 0705-436-100 E*DIN EN 60436-100:2019-09
VDE 0804-100-1991*DIN VDE 0804-100:1991
VDE 0105-100 A3-2003*DIN VDE 0105-100/A3:2003
DIN 8074:1970 Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 1698-2011 100-300 sows self-breeding and self-raising pig farm construction

National Metrological Verification Regulations of the People's Republic of China

JJG(民航) 042-1997 Verification Regulation of ППБ-100 difference Altitude Corrector Tester
JJG(民航) 0055-2000 Verification Regulation of Model F80129-100 Antiskid autobrake tester

CZ-CSN

CSN ON 70 4236-1965 Steam distillation unit DPP 60 specifications
CSN 13 1235-1963 Welding-neck flanges — Np 100
CSN 35 4701 Cast.3 Z1-1996 Low-voltage fuses. D - type fuses to 500 V, 100 A
CSN 25 4212-1962 Measuring parts for "go" limit of cylind- ical thread gauges. Normal trapezoidal hread. Diameter 10—100 mm
CSN 25 4211-1962 Cylindrical thread "go" gauges. rapezoidal normal thread, gDiameter 34—100 mm
CSN 25 4225-1962 Limit ring thread "not go" gauges. ormal trapezoidal thread. Diameter 0-100 mm
CSN 25 4223-1962 Reference gauges on wearing for ring hread "go" gauges. Normal trapezoidal hread. Diameter 10—100 mm

SCC

AENOR UNE 51512:1957 AVIATION LUBRICANT OIL. TYPE 100
AIA NAS1414-1422 PIN, SWAGE LOCKING, STEEL, 100° SHEAR HEAD, STUMP TYPE
HOLDEN HN 2353-2012 Antiflutter Adhesive - 100% Solids - Expanding
MIL MIL-C-28754/44B-1982 CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, 100 PIN, STRAIGHT, CONTACT TAILS ON .100 CENTERS (SUPERSEDING MIL-C-28754/44A)
AIA NAS6915-6922 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100º HEAD (MS20426), TENSION, STUMP-TYPE
AIA NAS1486-1492 PIN, SWAGE LOCKING, STEEL, 100° HEAD (MS24694), TENSION, STUMP-TYPE
AIA NAS6974-6982 PIN, SWAGE LOCKING, A286 CRES, 100° SHEAR HEAD, STUMP-TYPE
AIA NAS6925-6932 PIN, SWAGE LOCKING, STEEL, 100° HEAD (NASM20426), TENSION, STUMP-TYPE
AIA NAS1546-1552 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM24694), TENSION, STUMP-TYPE
HOLDEN HN 2353-2000 Anti Flutter Adhesive - 100% Solids - Expanding
MIL MIL-C-28754/60A-2016 Connectors, Electrical, Modular, Type IV, Connector, 100 Pin, Center Contact Tails on .100 Centers
DIN EN 63034 E:2018 Draft Document - Microspeakers (IEC 100/3006/CD:2017); Text in German and English
AIA NAS2306-2312 BOLT, LOCK, TENSION, 100° HEAD (MS24694), STUMP-TYPE, TITANIUM ALLOY
AIA NAS1516-1522 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM24694), PULL-TYPE
AIA NAS2705-2712 BOLT, LOCK, SHEAR, 100 DEGREES HEAD, STUMP-TYPE, TITANIUM ALLOY
MIL MIL-C-28754/60-1985 CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS
NS 173:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: O-ring
BS 279:1927 Flame proof type plug and socket heavy duty.100 ampere for voltages not exceeding 660
MIL MIL-DTL-28754/47C-2015 Connectors, Electrical Modular, Type IV, Connector, 100 Pin, Right Angle Contact Tails on .100 Centers
AIA NAS6935-6942 PIN, SWAGE LOCKING, STEEL, 100° CROWN HEAD, TENSION, PULL-TYPE
AENOR UNE 49201-2:1964 LIGHT CYLINDRICAL DRUM, FOR 100 KG OF OLIVE OIL
AIA NAS6946-6952 PIN, SWAGE LOCKING, A286 CRES, 100 Degrees HEAD (MS24694), TENSION, PULL-TYPE
AIA NAS2325-2332 Bolt-Lock, Tension 100 Degree Crown Head, Stump - Type, Titanium Alloy
BS 279:1932 Flame proof type plug and socket heavy duty.100 ampere for voltages not exceeding 660 volts
AIA NAS2315-2322 Bolt-Lock, Tension, 100 Degree Head (MS20426), Stump-Type, Titanium Alloy
MIL MIL-DTL-28754/59A-2016 Connectors, Electrical, Modular, Type IV, Connector, 100 Pin, Center Contact Tails on .100 Centers (Ceramic Compatible)
AIA NAS1535-1542 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM20426), TENSION, PULL-TYPE
AIA NAS7004-7012 PIN, SWAGE LOCKING, A286 CRES, 100° SHEAR/TENSION HEAD, PULL-TYPE
AIA NAS6955-6962 PIN, SWAGE LOCKING, A286 CRES, 100 Degrees HEAD (MS20426), TENSION, PULL-TYPE
MIL MIL-C-28754/55-1984 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE V, CABLE CONNECTOR, 100 PIN, CONTACTS ON .100 CENTERS
BS PD IEC TR 63289:2020 Conceptual model for TC 100 standardization on multimedia cyber technology
MIL MIL-DTL-28754/55A-2015 Connectors, Electrical, Modular, Connector Assembly, Type V, Cable Connector, 100 Pin, Contacts on .100 Centers
MIL MIL-F-21346/13-1971 FUSEHOLDER (SHROUD TYPE), STYLE FH 79 31-100 AMP., 1000 VOLT (NO S/S DOCUMENT)
AIA NAS7024-7032 PIN, SWAGE LOCKING, 108 KSI STEEL, 100° SHEAR/TENSION HEAD, PULL-TYPE
MIL MIL-C-28754/47B-1985 CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 100 PIN, RIGHT ANGLE CONTACT TAILS ON .100 CENTERS (SUPERSEDING MIL-C-28754/47A)
MIL MIL-W-17121E-1981 WATER SOFTENER UNIT, ZEOLITE PRESSURE TYPE (S/S BY WQA S-100-81)
07/30161925 DC BS EN 62329-3-100. Heat shrinkable shapes. Part 3. Specifications requirements for shape dimensions, material requirements and compatibility performance. Sheet 100-107. Heat-shrinkable moulded shape material types. Type A through Type H
MIL MIL-C-28754/59-1985 CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE) (SUPERSEDING MS14069C)
MIL MIL-DTL-28754/17E-2014 Connectors, Electrical, Modular, Connector Assembly, Type V, Style I, Contact Tails on .100 Centers
MIL MIL-DTL-28754/61A-2016 Connectors, Electrical, Modular, Type IV, Connector, 100 Pin, Center, Crossover, Contact Tails on .100 Centers (Ceramic Compatible)
CAN/CGSB 3.25-1994 Aviation gasoline (Grades 80, 100 and 100 LL)
MIL MIL-F-21346/14A-1976 FUSEHOLDER, SHROUD TYPE, STYLE FH 80, 100-200-AMP, 1000-VOLT (S/S BY UL-512)

Institute of Electrical and Electronics Engineers (IEEE)

RDD 59-1:2022 RDD 59-1:2022 - SMPTE Registered Disclosure Doc - Interoperable Master Format — Application DPP (ProRes)
SMPTE RDD 59-1:2022 RDD 59-1:2022 - SMPTE Registered Disclosure Doc - Interoperable Master Format — Application DPP (ProRes)
IEEE Std 1020-2011 IEEE Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants
IEEE P1020/D11, September 2011 IEEE Draft Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants
IEEE P1020/D12, October 2011 IEEE Draft Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants

Indonesia Standards

SNI 01-5007.10-2000 One hundred types of forest logs
SNI 05-3221-1992 Metric threaded crown nuts and slotted nuts, thread diameter 42 to 100 mm

ES-AENOR

INTA 15 31 13 Type 100 aviation lubricant

AIA/NAS - Aerospace Industries Association of America Inc.

NAS723-2011 SCREW@ MINIATURE@ 100° FLAT HEAD (Rev 3)
NAS723-2015 SCREW@ MINIATURE@ 100° FLAT HEAD (Rev 4)
NAS1486-1492-2011 PIN@ SWAGE LOCKING@ STEEL@ 100° HEAD (MS24694)@ TENSION@ STUMP-TYPE (Rev 5)
NAS6925-6932-2012 PIN@ SWAGE LOCKING@ STEEL@ 100° HEAD (NASM20426)@ TENSION@ STUMP-TYPE (Rev 3)
NAS723-1979 Screw@ Miniature 100 Deg Flat Head (Rev 2)
NAS1546-1552-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ TENSION@ STUMP-TYPE (Rev 3)
NAS1546-1552-2017 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ TENSION@ STUMP-TYPE (Rev 4)
NAS6915-6922-2012 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100? HEAD (MS20426)@ TENSION@ STUMP-TYPE (Rev 1)
NAS1414-1422-2010 PIN@ SWAGE LOCKING@ STEEL@ 100 DEGREES SHEAR HEAD@ STUMP TYPE (Rev 5)
NAS1724-1992 Pin-Rivet@ Threaded@ Taper Shank@ Shear Type 100 Degree Head (Rev 1)
NAS1516-1522-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ PULL-TYPE (Rev 3)
NAS1535-1542-2013 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM20426)@ TENSION@ PULL-TYPE (Rev 4)
NAS6974-6982-2014 PIN@ SWAGE LOCKING@ A286 CRES@ 100° SHEAR HEAD@ STUMP-TYPE (Rev 4)
NAS1516-1522-2016 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ PULL-TYPE (Rev 4)
NAS6946-6952-2013 PIN@ SWAGE LOCKING@ A286 CRES@ 100 Degrees HEAD (MS24694)@ TENSION@ PULL-TYPE (Rev 2)
NAS6974-6982-2012 PIN@ SWAGE LOCKING@ A286 CRES@ 100° SHEAR HEAD@ STUMP-TYPE (Rev 3)
NAS548-1964 Screw - 100 Degree Head@ Type B Tapping@ Frearson@ Phillips@ and Slotted Recess (Rev 1)
NAS1535-1542-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM20426)@ TENSION@ PULL-TYPE (Rev 3)
NAS6955-6962-2013 PIN@ SWAGE LOCKING@ A286 CRES@ 100 Degrees HEAD (MS20426)@ TENSION@ PULL-TYPE (Rev 2)
NAS6913-2012 PIN@ SWAGE LOCKING@ PH13-8Mo CRES@ 100? CROWN HEAD@ SHEAR@ PULL-TYPE (Rev 2)
NAS7004-7012-2013 PIN@ SWAGE LOCKING@ A286 CRES@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 3)
NAS6911-1991 Pin@ Swage Locking@ pH13-8Mo CRES@ 100 Deg Head@ Shear@ Stump-Type Superseded (Rev 1)
NASM20601-1999 Rivet@ Blind@ Structural Pull Stem@ Self-Plugging@ 100 Degree Flush Head@ Type II
NAS1414-1422-2014 PIN@ SWAGE LOCKING@ STEEL@ 100° SHEAR HEAD@ STUMP TYPE (Rev 6)
NAS7024-7032-2012 PIN@ SWAGE LOCKING@ 108 KSI STEEL@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 2)
NAS6946-6952-1989 Pin@ Swage Locking@ A-286 CRES@ 100 Degree Head (MS24694)@ Tension@ Pull-Type (Rev 1)
NAS6955-6962-1989 Pin@ Swage Locking@ A-286 CRES@ 100 Degree Head (MS20426)@ Tension@ Pull-Type (Rev 1)
NAS1516-1522-1973 Pin@ Swage Locking@ Aluminum Alloy@ 100 Degree Head (MS24694)@ Tension@ Pull-Type (Rev 2)
NAS6915-6922-1973 Pin@ Swage Locking@ Aluminum Alloy@ 100 Degree Head (MS20426)@ Tension@ Stump-Type
NASM83459/3-2018 RIVET@ TITANIUM@ BIMETAL 95 KSI Fsu@ 100? REDUCED FLUSH CROWN HEAD@ TYPE III (Rev 2)
NAS2306-2312-2012 BOLT@ LOCK@ TENSION@ 100° HEAD (MS24694)@ STUMP-TYPE@ TITANIUM ALLOY (Rev 4)
NAS7024-7032-2014 PIN@ SWAGE LOCKING@ 108 KSI STEEL@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 3)

United States Navy

NAVY MIL-T-81333 A-1988 TELESCOPE, MARK 100 MOD 0 AND 1
NAVY MIL-T-81333 A NOTICE 1-1999 TELESCOPE, MARK 100 MOD 0 AND 1
NAVY A-A-50614-1993 BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 12 VOLT, 100 AMPERE-HOUR, TYPE 12V-S-100 AH
NAVY A-A-50613-1993 BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 6 VOLT, 100 AMPERE-HOUR, TYPE 6V-S-100 AH
NAVY MIL-STD-1322-185-1969 PALLETIZING DOMESTIC UNIT LOAD CLUSTER, FRAG, BOMB, 100 LB, M28 OR M28A2 (IN WOOD BOX)
NAVY MS3370 REV B NOTICE 1-1997 CONVERTER, 100 AMPERE CLASS C, NONREGULATED AIRCRAFT, BLAST COOLED

GM North America

GM 9981771-1990 Solvent, Aromatic, SC - 100 Type

Electronic Components, Assemblies and Materials Association

ECA EIA-364-33A-2002 TP-33A Inductance Measurement Test Procedure for Electrical Connectors (100 nH - 100 mH)

British Standards Institution (BSI)

17/30352646 DC BS IEC 63034. Microspeakers (TC 100)
PD IEC TR 63289:2020 Conceptual model for TC 100 standardization on multimedia cyber technology
BS EN 2550:1993 Rivets, solid 100 ° normal countersunk head, in aluminium 1050A, inch based series
BS EN 2127:1992(1999) Aluminium alloy AL - P7075 - T73511 — Extruded bars and sections a or D ≤ 100 mm

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 723-1979 Screw, Miniature 100 Deg Flat Head (Rev. 2)
AIA/NAS NAS 6936-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS 6935-6942-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS 6940-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS6974-6982-2012 PIN, SWAGE LOCKING, A286 CRES, 100?SHEAR HEAD, STUMP-TYPE Rev 3
AIA/NAS NAS1414-1422-2014 PIN, SWAGE LOCKING, STEEL, 100° SHEAR HEAD, STUMP TYPE (Rev 6)
AIA/NAS NAS723-2015 SCREW, MINIATURE, 100° FLAT HEAD (Rev 4)
AIA/NAS NAS 6938-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS 6935-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS 6942-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type
AIA/NAS NAS1414-1422-2010 PIN, SWAGE LOCKING, STEEL, 100 DEGREES SHEAR HEAD, STUMP TYPE Rev 5
AIA/NAS NAS6974-6982-2014 PIN, SWAGE LOCKING, A286 CRES, 100° SHEAR HEAD, STUMP-TYPE (Rev 4)
AIA/NAS NAS 6918-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS 6915-6922-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS 6915-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS6915-6922-2012 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100? HEAD (MS20426), TENSION, STUMP-TYPE (Rev 1)
AIA/NAS NAS 6920-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS 6916-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS 1436-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2)
AIA/NAS NAS 1436-1442-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type Rev. 2
AIA/NAS NAS1486-1492-2011 PIN, SWAGE LOCKING, STEEL, 100° HEAD (MS24694), TENSION, STUMP-TYPE (Rev 5)
AIA/NAS NAS 1535-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 6978-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 6982-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 1536-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1476-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1516-1522-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type Rev 2
AIA/NAS NAS 6974-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 1540-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1480-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 6975-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 7028-1984 Pin, Swage Locking, 108 ksi Steel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1)
AIA/NAS NAS 1520-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1460-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1414-1422-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type Rev. 4
AIA/NAS NAS 1703-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS6935-6942-2011 PIN, SWAGE LOCKING, STEEL, 100° CROWN HEAD, TENSION, PULL-TYPE (Rev 1)
AIA/NAS NAS 1703-1710-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi Rev. 9
AIA/NAS NAS 1456-1462-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 2
AIA/NAS NAS 1538-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1475-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1416-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 1704-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 1518-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 6974-6982-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type Rev. 2
AIA/NAS NAS 1456-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1482-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1440-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
AIA/NAS NAS 1708-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS1516-1522-2011 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM24694), PULL-TYPE (Rev 3)
AIA/NAS NAS 1516-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 2
AIA/NAS NAS 1542-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1420-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 1706-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 1462-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1535-1542-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Pull-Type Rev. 2
AIA/NAS NAS 6980-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 1710-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 1522-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 6976-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA/NAS NAS 1458-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1442-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
AIA/NAS NAS 1478-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
AIA/NAS NAS 1438-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
AIA/NAS NAS 1418-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 1705-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 1475-1482-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type Rev. 2
AIA/NAS NAS 1709-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 1422-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 1707-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 2060-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NAS 2706-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA/NAS NAS 1415-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 1414-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA/NAS NAS 7032-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2710-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA/NAS NAS 7025-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2055-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NAS 7024-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2705-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA/NAS NAS 2056-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NAS 2712-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA/NAS NAS1546-1552-2011 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM24694), TENSION, STUMP-TYPE (Rev 3)
AIA/NAS NAS 7026-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Revision 1; FSC 5320
AIA/NAS NASM20601-2016 RIVET, BLIND, STRUCTURAL, PULL STEM, SELF-PLUGGING, 100° FLUSH HEAD, TYPE II (Rev 2)
AIA/NAS NAS 2125-2132-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 2510-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
AIA/NAS NAS 2055-2062-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NASM21207-2001 Screw, Tapping, 100 Degree Flat Head, Spaced Thread Rev 1
AIA/NAS NAS 7024-7032-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Rev. 1; FSC 5320
AIA/NAS NAS 2128-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 1490-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 4)
AIA/NAS NAS 2026-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS 6913-1992 Pin, Swage Locking, pH13-8Mo CRES, 100 Degree Crown Head, Shear, Pull-Type (Rev. 1)
AIA/NAS NAS 2062-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NAS 2708-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA/NAS NAS 2058-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA/NAS NAS 2705-2712-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy Rev. 7
AIA/NAS NAS 7030-1984 Pin, Swage Locking, 108 KSI Steel, 100 Degree Shear/Tension Head, Pull-Type Revision 1; FSC 5320
AIA/NAS NASM20601-2011 RIVET, BLIND, STRUCTURAL, PULL STEM, SELF-PLUGGING, 100° FLUSH HEAD, TYPE II (Rev 1)
AIA/NAS NAS 2132-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 2506-2512-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3
AIA/NAS NAS7004-7012-2013 PIN, SWAGE LOCKING, A286 CRES, 100° SHEAR/TENSION HEAD, PULL-TYPE (Rev 3)
AIA/NAS NAS 2030-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS 2130-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 1486-1492-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS24694), Tension, Stump-Type Rev. 4
AIA/NAS NAS 2025-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS1535-1542-2013 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM20426), TENSION, PULL-TYPE (Rev 4)
AIA/NAS NAS1516-1522-2016 PIN, SWAGE LOCKING, ALUMINUM ALLOY, 100° HEAD (NASM24694), PULL-TYPE (Rev 4)
AIA/NAS NAS 6946-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS24694), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2506-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
AIA/NAS NAS 2032-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS6955-6962-2013 PIN, SWAGE LOCKING, A286 CRES, 100 Degrees HEAD (MS20426), TENSION, PULL-TYPE (Rev 2)
AIA/NAS NAS 6948-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS24694), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2126-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 2512-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
AIA/NAS NAS 2125-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 2508-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
AIA/NAS NAS 2118-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 6956-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 1486-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 4)
AIA/NAS NASM20601-1999 Rivet, Blind, Structural Pull Stem, Self-Plugging, 100 Degree Flush Head, Type II
AIA/NAS NAS 2115-2122-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 6955-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 6960-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 2122-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 1603-1610-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi Rev. 9
AIA/NAS NAS 6925-6932-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type Rev. 2
AIA/NAS NAS 1492-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 4)
AIA/NAS NAS 2028-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS 1488-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 4)
AIA/NAS NAS 2025-2032-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Pull-Type
AIA/NAS NAS 2115-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 6950-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS24694), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 6952-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS24694), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 6928-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS2705-2712-2015 BOLT, LOCK, SHEAR, 100 DEGREES HEAD, STUMP-TYPE, TITANIUM ALLOY (Rev 9)
AIA/NAS NAS 7004-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type Revision 2; FSC 5320
AIA/NAS NAS 6932-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS 2120-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 6958-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 6922-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type
AIA/NAS NAS 2116-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
AIA/NAS NAS 6955-6962-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Rev. 1; FSC 5320
AIA/NAS NAS 7005-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type Revision 2; FSC 5320
AIA/NAS NAS 6946-6952-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 1; FSC 5320
AIA/NAS NAS 7012-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type Revision 2; FSC 5320
AIA/NAS NAS 6962-1989 Pin, Swage Locking, A-286 CRES, 100 Degree Head (MS20426), Tension, Pull-Type Revision 1; FSC 5320
AIA/NAS NAS 6930-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS 7008-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type Revision 2; FSC 5320
AIA/NAS NAS 7006-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type ) Revision 2; FSC 5320
AIA/NAS NAS 1546-1552-1973 Pin, Swage Locking, Alumium Alloy, 200 Degree Head (MS24694), Tension, Stump-Type Rev.2
AIA/NAS NAS 2330-1981 Bolt-Lock, Tension, 100 Degree Crown Head, Stump - Type, Titanium Alloy (Rev. 1)
AIA/NAS NAS 6926-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS2705-2712-2011 BOLT, LOCK, SHEAR, 100 DEGREES HEAD, STUMP-TYPE, TITANIUM ALLOY (Rev 8)
AIA/NAS NAS 6925-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS7024-7032-2012 PIN, SWAGE LOCKING, 108 KSI STEEL, 100?SHEAR/TENSION HEAD, PULL-TYPE Rev 2
AIA/NAS NAS 6910-1991 Pin, Swage Locking, pH13-8Mo CRES, 100 Deg Crown Head, Tension, Pull-Type Superseded - June 1991 (Rev. 1)
AIA/NAS NAS9305-2010 RIVET, BLIND, 100 DEGREES FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE B, CLASS 2, CODE B AND E (OVERSIZE DIAMETER) Rev 5
AIA/NAS NAS 1605-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
AIA/NAS NAS 2325-1981 Bolt-Lock, Tension, 100 Degree Crown Head, Stump - Type, Titanium Alloy (Rev. 1)
AIA/NAS NAS 1550-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2)
AIA/NAS NAS 7010-1990 Pin, Swage Locking, A-286 CRES, 100 Degree Shear/Tension Head, Pull-Type Revision 2; FSC 5320
AIA/NAS NASM21140-1999 Fasteners, Blind, High Strength, Pull Type, Positive Mechanical Lock, 100 Degree Flush Head, Corrosion Resisting Steel, 95 KSI Fsu

AR-IRAM

IRAM 6562-1954 Type 100 aviation lubricant

Aerospace Industries Association

AIA NAS 1414-1422-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type Rev. 4
AIA NAS 6930-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA NAS 6925-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA NAS 6926-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA NAS 6980-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6932-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA NAS 6928-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
AIA NAS 723-1979 Screw, Miniature 100 Deg Flat Head (Rev. 2) R(1992)
AIA NAS 6976-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6975-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6974-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6982-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6978-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
AIA NAS 6935-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 6940-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 6936-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 6935-6942-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 6942-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 6938-1973 Pin, Swage Locking, Steel, 100 Degree Crown Head, Tension, Pull-Type R(2001)
AIA NAS 2056-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 2060-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 2055-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 2062-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 2705-2712-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy Rev. 7
AIA NAS 2058-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 2055-2062-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 100 Degree Flush Head, Stump Type
AIA NAS 1416-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 2708-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA NAS 6974-6982-1988 Pin, Swage Locking, A-286 CRES, 100 Degree Shear Head, Stump-Type Rev. 2
AIA NAS 1420-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 2712-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA NAS 1516-1522-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS24694), Tension, Pull-Type R(1981)
AIA NAS 1418-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 2710-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA NAS 6925-6932-1988 Pin, Swage Locking, Steel, 100 Degree Head (MS20426), Tension, Stump-Type Rev. 2
AIA NAS 6915-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type R(2001)
AIA NAS 1422-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 1415-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 2706-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA NASM83459/2-1999 Rivet, Titanium, Bimetal 95 KSI Fsu 100 Degree Tension Crown Head, Type II FSC 5320
AIA NAS 1414-1988 Pin, Swage Locking, Steel, 100 Degree Shear Head, Stump-Type (Rev. 4)
AIA NAS 2705-1992 Bolt-Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy (Rev. 7)
AIA NAS 6916-1973 Pin, Swage Locking, Aluminum Alloy, 100 Degree Head (MS20426), Tension, Stump-Type R(2001)

HU-MSZT

MSZ 10798/4-1978 Perforated cement beams type B 60 and B 100
MSZ 8511-1964 Swallow type radial plate cone protein D1 = 100-160 accurate
MSZ 10798/3-1978 MSZ 10798/3-78 MB 60/29 and MB 100/29 perforated cement beams

(U.S.) Ford Automotive Standards

FORD SB1-24A-1992 100% KEVLAR REVERSIBLE HEAVYWEIGHT KNIT GLOVES

CN-STDBOOK

图书 A-4796 100 Typical Quality Atlases of Power Transmission and Transformation Projects

FI-SFS

SFS C.4.42-1963 Heart of the Workplace 100A 380V Model TPK 100

U.S. Military Regulations and Norms

ARMY MIL-DTL-62099 D-1998 TRANSMISSION, HYDRAULIC: MODIFIED AUTOMATIC TX-100-1
ARMY MIL-DTL-62099 D VALID NOTICE 1-2008 TRANSMISSION, HYDRAULIC: MODIFIED AUTOMATIC TX-100-1

Association Francaise de Normalisation

NF L21-264:1982 "Sl" type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. T 20 type.
NF L21-266:1982 "Sl" type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. T 30 type.
NF L21-262:1982 "Sl" type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. Standard type.
NF S61-705:1966 Fire fighting equipment. Self-sealing symmetrical half couplings, size 100. Type AR.

TIA - Telecommunications Industry Association

TSB-100-A-2-2011 Network Reference Model for cdma2000 (Addendum to TSB-100-A)
TSB-100-A-1-2006 Wireless Reference Network Model (Addendum to TSB-100-A)

Defense Logistics Agency

DLA DSCC-VID-V62/04650 REV A-2012 MICROCIRCUIT, DIGITAL, 1394 INTEGRATED PHY AND LINK LAYER CONTROLLER FOR SBP- 2 PRODUCTS AND DPP PRODUCTS , MONOLITHIC SILICON
DLA MIL-C-28754/44 B VALID NOTICE 2-2013 Connectors, Electrical, Modular, Type IV, 100 Pin, Straight, Contact Tails on .100 Centers
DLA MS24141 REV K-2003 RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED
DLA MS16286 REV A (1)-1999 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16286 REV A VALID NOTICE 2-2005 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS27242 REV K-2003 RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST N.O. TYPE I, HERMETICALLY SEALED
DLA MS24168 REV T VALID NOTICE 1-2011 Relays, Electromagnetic, 100 Amperes, 3 PST (N.O.), Type I, Hermetically Sealed
DLA MS16286 REV A-1997 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS27242 REV K VALID NOTICE 1-2010 Relays, Electromagnetic, 100 Amperes, 1 PST N.O. Type I, Hermetically Sealed
DLA MS16286 REV A NOTICE 1-2000 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16285 REV A NOTICE 1-2000 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS24182 REV L-2003 RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED
DLA MS16285 REV A-1997 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16285 REV A VALID NOTICE 2-2005 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS24168 REV T (1)-2005 RELAYS, ELECTROMAGNETIC, 100 AMPERES, 3 PST (N.O.), TYPE I, HERMETICALLY SEALED
DLA MS24141 REV K VALID NOTICE 1-2010 Relays, Electromagnetic, 100 Amperes, 1 PST (N.O.), Type I, Hermetically Sealed
DLA DSCC-DWG-93046 REV A-2002 MINI SHUNT, .100 INCH CENTERLINE, .025 INCH SQUARE MATING PIN
DLA MS25031 REV M-2003 RELAY, ELECTROMAGNETIC,100 AMPERES, 2 PDT, N.O. TYPE II, NON-HERMETICALLY SEALED, MECHANICALLY INTERLOCKED
DLA SMD-5962-99595 REV A-2002 MICROCIRCUIT, LINEAR, 100 MHZ, SINGLE, VOLTAGE FEEDBACK, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA MIL-I-27188 C-2006 INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI

(U.S.) Telecommunications Industries Association

TIA TSB-100-A-2-2011 Network Reference Model for cdma2000 (Addendum to TSB-100-A)
TIA TSB-100-A-1-2006 Wireless Reference Network Model (Addendum to TSB-100-A)

NO-SN

NS 173-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: O-ring

GM Holden Ltd

HOLDEN HN 2377-2007 SEALER PREFORMED, WELDABLE HIGH EXPANSION 100-200%

RU-GOST R

GOST 34718-2021 Glass packaging. Vacuum lug finishes. Type 100 regular

Society of Automotive Engineers (SAE)

SAE AS25361-2004 Circuit Breaker Aircraft, Trip-Free, Push-Pull, 50 Thru 100 AMP, Type I
SAE AS3220-2-1950 AS3220 Filter - Fuel Type 'A' Assy. 100 G.P.H.
SAE ESC75-3-2000 ESC75 Backshell, Assembly, Straight, RFI / EMI Cone Grounding, 100% Anti-Decoupling
SAE AS25361_A1-2005 Circuit Breaker - Aircraft, Trip-Free, Push-Pull, 50 Thru 100 Amp, Type I

German Institute for Standardization

DIN EN 62282-6-100:2012 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010 + Cor.:2011); German version EN 62282-6-100:2010
DIN EN 62282-6-100/A1:2013 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012); German version EN 62282-6-100:2010/A1:2012

Lithuanian Standards Office

LST EN 62282-6-100-2010 Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010)
LST EN 62282-6-100-2010/A1-2013 Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012)
LST EN 62329-3-100-2010 Heat-shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 100: Heat-shrinkable moulded shape dimensions (IEC 62329-3-100:2010)

International Electrotechnical Commission (IEC)

IEC TR 63289:2020 Conceptual model for TC 100 standardization on multimedia cyber technology

U.S. Air Force

AIR FORCE QPL-25624-31-2003 TRANSMITTER, PRESSURE, TRU-80/A, OIL ENGINE- MOUNTED, 0-100 PSI
AIR FORCE MIL-T-25624 G-1990 TRANSMITTER, PRESSURE, TRU-80/A, OIL ENGINE-MOUNTED, 0-100 PSI

ES-UNE

IEEE 1020-2023 IEEE Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants

IT-UNI

UNI 6412-1969 A lifeboat with a carrying capacity of less than 100 persons. Dimensions and typical characteristics

IN-BIS

IS 1180-1964 Specification for outdoor type three-phase distribution transformers from 100 Kva to 11 Kv

Others: xd1-3 100 type x-ray tube,xd1-3+100 x-ray tube,d100 type,dpp-100,dpp100,dpp 100 type,DPP 100,TTL 100 type,TTL+ 100 type,DPP+100,p-type 100,Polished rod tolerance zone r6 shear resistant type 100° countersunk head titanium alloy high lock bolt