Infrared Relative Peak Intensity Ratio

Infrared Relative Peak Intensity Ratio, Total:51 items.

The international standard classification for "Infrared Relative Peak Intensity Ratio" includes: Pigments and extenders .

The Chinese standard classification for "Infrared Relative Peak Intensity Ratio" includes: Basic standards and general methods for dye .

Jilin Provincial Standard of the People's Republic of China

DB22/T 2979-2019 Testing for similarity of base asphalt FTIR method

Military Standard of the People's Republic of China-General Armament Department

GJB 5214.19-2003 Special bomb effect test method Part 19: Bandpass method for measuring infrared radiation intensity of infrared jamming bombs
GJB 9723-2020 On-board radiation calibration method for spaceborne Earth observation infrared cameras

Taiwan Provincial Standard of the People's Republic of China

CNS 11365-1985 Method of Test for Relative Zeolite Diffraction Intensities

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6688-1986 Determination of relative strength of dyes(Instrumental method)
GB/T 7287.3-1987 Measuring method for the radio between radiant surface and rear surface of infrared heater

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39824-2021 Determination of relative strength of dyes in solution

American Society for Testing and Materials (ASTM)

ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

Korean Agency for Technology and Standards (KATS)

KS B ISO 9847:2003 Solar energy－Calibration of field pyranometers by comparison to a reference pyranometer
KS F 2386-2013(2018) Standard test method for adhesive strength between pavement layers
KS H ISO 279:2011 Essential oils-Determination of relative density at 20 ℃-Reference method
KS H ISO 279:2014 Essential oils — Determination of relative density at 20 degrees C — Reference method

BE-NBN

NBN 442-1958 relative density and specific gravity
NBN 443-1958 relative density and specific gravity

SCC

CSA 2.34-2001(R2005) Gas-Fired Low-Intensity Infrared Heaters
CSA 2.35-2001(R2005) Gas-Fired High-Intensity Infrared Heaters
CSA ANSI Z83.19-2017/CSA 2.35-2017(R2022) Gas-fired high-intensity infrared heaters
CSA ANSI Z83.20-2008/CSA 2.34-2008(R2013) Gas-Fired Low-Intensity Infared Heaters
CSA ANSI Z83.19-2009/CSA 2.35-2009(R2014) Gas-fired high-intensity infrared heaters
AATCC 182-2000 Relative Color Strength of Dyes in Solution
AATCC 182-2017 Relative Color Strength of Dyes in Solution

American National Standards Institute （ANSI)

ANSI Z83.19-2017 Gas-fired high-intensity infrared heaters
ANSI Z83.20-2016 Gas-fired tubular and low-intensity infrared heaters

Japanese Industrial Standards Committee (JISC)

JIS B 7525-3:2013 Hydrometer-type relative density meters

Association Francaise de Normalisation

NF ISO 22754:2009 Pulp and paper - Determination of relative residual ink concentration (ERIC number) by measuring infrared reflectance
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.

South African Bureau of Standard

SANS 5901:1978 True relative density of refractory materials (Pycnometer method)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP78-1969 Relative Spectral Response Curves for Semiconductor Infrared Detectors

Society of Automotive Engineers (SAE)

SAE ARP1974-1986 Clamps, Support, Comparative Fatigue Strengths, Test Method

Canadian Standards Association/American National Standards

CSA/AM CSA/ANSI Z83.20A-2010 Gas-Fired Low Intensity Infrared Heaters Addenda to the Second Edition

Canadian Standards Association (CSA)

CSA 2.35B-2007-2007 Gas-Fired High-Intensity Infrared Heaters Addenda to the First Edition
CSA 2.35A-2002-2002 Gas-Fired High-Intensity Infrared Heaters Addenda to First Edition

PL-PKN

PN C04404-15-1987 Pigments for paints General testing methods Comparison of relative tinting strength and shade of the chromatic pigments

VN-TCVN

TCVN 6594-2007 Crude petroleum and liquid petroleum products.Determination of density, relative density (specific gravity), or API gravity.Hydrometer method

German Institute for Standardization

DIN 55986:1981 Testing of pigments; determination of relative tinting strength and colour difference after colour reduction; colorimetric method

International Organization for Standardization (ISO)

ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method

British Standards Institution (BSI)

BS ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
BS ISO 279:2001 Essential oils - Determination of relative density at 20 °C - Reference method

TR-TSE

TS 1818-1975 METHODS FOR DETERMINING THE DENSITY AND RELAT?VE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CEL?. Ul.AR PLASTICS

CZ-CSN

CSN 65 9705-1987 Organic pigments. Method of relative strength and stradě determination

RU-GOST R

GOST 33364-2015 Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer

Others: Relative intensity of infrared peaks,Relative intensity of peaks in the infrared,Infrared Relative Peak Intensity Ratio,Infrared Relative Peak Intensity Ratio