water temperature above 6

water temperature above 6, Total:188 items.

The international standard classification for "water temperature above 6" includes: Equipment for petroleum and natural gas industries in general , Extraction and processing of petroleum and natural gas , Rubber , Refrigerating technology , Inks. Printing inks .

The Chinese standard classification for "water temperature above 6" includes: Petroleum drilling & production equipment and instrument , Petroleum drilling , Rubber products in general , Refrigeration equipment , Printing Technology , Thermal Measurement .

Professional Standard - Petroleum

SY/T 6466-2000 Evaluation procedure for high temperature property of set oil well cement
SY/T 6453-2000 High temperature and high pressure fluid loss cell
SY 6453-2000 Cement slurry high temperature and high pressure water loss tester

Professional Standard - Machinery

JB/T 12325-2015 High-leaving evaporator water temperature chiller
JB/T 12840-2016 Air source heat pump high temperature hot air&hot water unit
JB/T 6442-2013 High Temperature, Hot Water Cleaning Machine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9868-1988 Rubber-General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 25861-2023 Water-source high temperature heat pumps using the vapor compression cycle
GB/T 25861-2010 Water-source high temperature heat pumps using the vapor compression cycle

Group Standards of the People's Republic of China

T/QGCML 3289-2024 Easy to disassemble and install the high temperature flue gas sampling probe
T/CSTM 00080-2019 Tensile testing method of metallic tubular goods in high temperature high pressure water
T/CNS 75-2022 Crud deposit test method for fuel cladding in high temperature pressurized water environment
T/WZBF 053-2024 Ultra high temperature water-cooled structure hard sealed ball valve
T/CNS 79-2022 Test method for tangential fretting wear of fuel cladding in high temperature pressurized water of pressurized water reactor
T/SDCIAS 002-2021 Water-based self-drying high temperature resistant paint
T/JAR 011/1-2024 Temperature control system for industrialized high-density aquaculture
T/SSEA 0096-2020 Technical Requirements for Covering and Insulation of Blast Furnace Ladle

工业和信息化部

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
JB/T 14642-2022 High-leaving water temperature chiller base on dew point indirect evaporative cooling

Professional Standard - Military and Civilian Products

WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

农业农村部

NY/T 2915-2016 Identification and classification of heat injury of rice

未注明发布机构

DIN EN 10269 Berichtigung 2:2007 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigung 1:2006 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigungichtigung 2:2007 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures
DIN EN 10269 Berichtigungichtigung 1:2006 Steels and nickel alloys for fasteners for use at elevated and/or low temperatures

Military Standard of the People's Republic of China-General Armament Department

GJB 8501-2015 Specification for phosphate-based high-temperature resistant coatings

Professional Standard - Light Industry

QB/T 4538-2013 Water-based flexographic resistance to high-temperature pre-printing ink

Professional Standard - Chemical Industry

HG/T 4387-2012 Butylene Hydration Resistance High-temperature Resin Catalyst
HG/T 5367.6-2024 Coatings for rail transit vehicles Part 6: High temperature resistant motor coatings

Professional Standard - Aviation

HB 3438-1984 Taper shank twist drill used for machining high temperature alloy and titanium alloy d＝6~20mm
HB 3437-1984 Taper shank short twist drill used for machining high temperature alloy and titanium alloy d＝6~20mm

Professional Standard - Ferrous Metallurgy

YB/T 6100-2023 Technical Specifications for Covering and Insulating Blast Furnace Hot Metal Tanks

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 1872-2011 High temperature composting technical operation rules for water hyacinth

Hubei Provincial Standard of the People's Republic of China

DB42/T 1410-2018 Procedures for identification of rice varieties with cascade temperature at flowering stage for high temperature tolerance
DB42/T 1704-2021 Technical specification for identification of high temperature ripening tolerance of rice

National Metrological Verification Regulations of the People's Republic of China

JJG 618-1999 Verification Regulation of High Precision Mercury-in-Glass Thermometers

TR-TSE

TS 2736-1977 High Temperature Water Central Heating Systems With Flow Temperatures Higher Than 110°C

AT-ON

ONORM B 2540-2000 Construction of water or steam pipelines under pressures above 25 bar and temperatures above 110 ℃ or under pressures above 0,5 bar and temperatures above 350℃
ONORM B 2541-2000 Construction of water or steam pipelines under pressures exceeding 0,5 bar to 25 bar and temperatures higher than 110℃ to 350℃ or pressures exceeding 10 bar and temperatures not more than 110℃

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 15-2012 MEDIUM- AND HIGH-TEMPERATURE WATER HEATING
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 15-2012 Medium-And High-Temperature Water Heating
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 14-2008 MEDIUM- AND HIGH-TEMPERATURE WATER HEATING SYSTEMS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 14-2008 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 14-2004 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 14-1996 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 14-1996 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 14-2000 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 14-2004 Medium- and High-Temperature Water Heating Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 14-2000 Medium- and High-Temperature Water Heating Systems
ASHRAE AC-02-6-3-2002 How to Raise Chilled Water Temperature Differentials
ASHRAE AT-96-4-1-1996 Twenty-Five Ways to Raise Your Chilled-Water Temperature Differential

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE SYSTEMS AND EQUIP IP CH 15-2012 MEDIUM- AND HIGH-TEMPERATURE WATER HEATING
ASHRAE EQUIP SI CH 14-2008 MEDIUM- AND HIGH-TEMPERATURE WATER HEATING SYSTEMS
ASHRAE EQUIP IP CH 14-2008 Medium- and High-Temperature Water Heating Systems

US-FCR

FCR AF M32-1057-1991 HIGH TEMPERATURE WATER HEATING SYSTEMS

Korean Agency for Technology and Standards (KATS)

KS D 4107-2007(2012) Steel castings for high temperature and high pressure service
KS D 4112-1995(2010) CENTRIFUGALLY CAST STEEL PIPES FOR HIGH TEMPERATURE AND HIGH PRESSURE SERVICE
KS K 0720-2007 Test method for colour fastness to high temperature steaming
KS K 0720-1979 Test method for colour fastness to high temperature steaming
KS K 0720-1987 Test method for colour fastness to high temperature steaming
KS D 4129-1995(2020) High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service
KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
KS D 0410-2022 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting

United States Navy

NAVY MIL-C-2861 E-1988 CEMENT, INSULATION, HIGH TEMPERATURE
NAVY MIL-W-6015 A-1953 WIRE ROPE, 6 BY 19, HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)
NAVY MIL-W-6015 A NOTICE 3-1998 WIRE ROPE, 6 BY 19, HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)
NAVY MIL-W-6015 A (2)-1965 WIRE ROPE, 6 BY 19, HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)
NAVY MIL-G-82682-1978 GRAPHITE BILLETS, EXTRUDED (FOR HIGH TEMPERATURE APPLICATION)
NAVY MIL-G-82682 NOTICE 1-1992 GRAPHITE BILLETS, EXTRUDED (FOR HIGH TEMPERATURE APPLICATION)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 1056-1997 Spacer, Sleeve-Rivet, High Temperature, Non Magnetic Rev.6
AIA/NAS NAS 1617-1981 Coating: High Temperature Resistant, Water Reducible (Rev. 1)

GM North America

GM 9981185-1975 Grease, Hi-Temperature, Water-Resistant
GM 9986288-2009 Waterborne, High Bake, Sprayable Damper, High Performance
GM 9986384-2013 Hot Melt Adhesive for High Temperature Applications (Issue 1)
GM 9985164-2014 Grease, High Temperature Water Spray Resistant, No. 1-2 (Issue 7)
GM 9985164-2020 Grease, High Temperature Water Spray Resistant, No. 1-2 (Issue 7)

General Motors Corporation (GM)

GM 9981116-1975 Lubricant - Grease High Temperature and Water Spray Resistant
GM 9985164-2000 Grease, High Temperature Water Spray Resistant, No. 1-2 Revision C

German Institute for Standardization

DIN EN ISO 22391-3:2022-05 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021 / N...
DIN EN ISO 22391-5:2021-06 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009 + Amd 1:2020, Corrected version 2021-03); German and English version EN I...
DIN CEN ISO/TS 22391-7:2019-04*DIN SPEC 19576:2019-04 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018); German and English version CEN ISO/TS 22391-7:2018 / Note: T...
DIN EN ISO 22391-2:2021-03 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009 + Amd. 1:2020); German and English version EN ISO 22391-2:2009 + A1:2020 / Note: This standard is par...
DIN EN ISO 22391-1:2010-04 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009); German version EN ISO 22391-1:2009

Aerospace Industries Association

AIA NAS 1056-1997 Spacer, Sleeve-Rivet, High Temperature, Non Magnetic Rev.6
AIA NAS 1617-1981 (Inactive)Coating: High Temperature Resistant, Water Reducible (Rev. 1)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1056-1997 Spacer@ Sleeve-Rivet@ High Temperature@ Non Magnetic (Rev 6)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)

AENOR

UNE 9003:1986 HIGH-TEMPERATURE WATER BOILERS. CLASSIFICATION.
UNE 9005:1986 ESSENTIAL CHARACTERISTICS TO DEFINE A HIGH-TEMPERATURE WATER BOILER.

American Water Works Association (AWWA)

AWWA C200-2005 Steel Water Pipe - 6 in. (150 mm) and Larger

U.S. Military Regulations and Norms

ARMY MIL-G-47316 A NOTICE 1-1996 GRAPHITE, MOLDED, FOR HIGH TEMPERATURE APPLICATIONS
ARMY MIL-G-47316 A-1992 GRAPHITE, MOLDED, FOR HIGH TEMPERATURE APPLICATIONS
ARMY UFGS-33 60 00.00 10-2008 CENTRAL HIGH TEMPERATURE WATER (HTW) GENERATING PLANT AND AUXILIARIES

SAE - SAE International

SAE AMS2411C-1981 SILVER PLATING For High Temperature Applications
SAE AMS2411D-1984 Silver Plating for High Temperature Applications
SAE J2582-2018 Automotive Ductile Iron Castings for High Temperature Applications

Society of Automotive Engineers (SAE)

SAE AMS2411-1966 SILVER PLATING For High Temperature Applications
SAE AMS2411A-1969 SILVER PLATING For High Temperature Applications
SAE AMS2411B-1979 SILVER PLATING For High Temperature Applications
SAE AMS2411D-1991 SILVER PLATING For High Temperature Applications
SAE AMS2411K-2024 Plating, Silver for High Temperature Applications
SAE AMS2411E-1999 Plating, Silver for High Temperature Applications
SAE AMS2411J-2019 Plating, Silver for High Temperature Applications
SAE J2582-2004 Automotive Ductile Iron Castings for High Temperature Applications
SAE J2582-2001 Automotive Ductile Iron Castings for High Temperature Applications

SCC

UNE-EN 1110:2000 FLEXIBLE SHEETS FOR WATERPROOFING. BITUMEN SHEETS FOR ROOF WATERPROOFING. DETERMINATION OF FLOW RESISTANCE AT ELEVATED TEMPERATURE.
BS EN ISO 22391-3:2009+A1:2020 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)-Fittings
BS 691:1979 Specification for clinical maximum thermometers (mercury-in-glass)
MIL MIL-C-24707/6-1989 CASTINGS, FERROUS, CHROMIUM STEEL, FOR PRESSURE-CONTAINING PARTS SUITABLE FOR HIGH-TEMPERATURE SERVICE
ADS AS2475-2476 Tanks - 6 Gallons (for De-Icing Fluid & Drinking Water)
MIL MIL-C-2861E-1988 CEMENT, INSULATION, HIGH TEMPERATURE (SUPERSEDING MIL-C-2861D)
AS 1143:1973 High temperature creosote for the preservation of timber
AWWA ACE56165 High Rate/High Efficiency Process Applied to Variable Raw Water Quality
AWWA D107-2016 Composite Elevated Tanks for Water Storage
AWWA MTC69694 Performance of a Reverse Osmosis System When Reclaiming High pH/High Temperature Wastewater
DANSK DS/EN ISO 22391-3:2010 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
BS PD CEN ISO/TS 22391-7:2018 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT)-Guidance for the assessment of conformity
UNE-ISO 22391-1:2008 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 1: General
DANSK DS/EN ISO 22391-1:2010 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
UNE-ISO 22391-2:2008 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 2: Pipes
DANSK DS/EN ISO 22391-2:2010 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
DANSK DS/EN ISO 22391-3/A2:2010 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
DIN EN 60749-6:2017 Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature (IEC 60749-6:2017); German version EN 60749-6:2017
NSF/ANSI 358-4-2022 Polyethylene of Raised Temperature (PE-RT) Tubing and Fittings for Water-Based Ground-Source (Geothermal) Heat Pump Systems
MIL MIL-A-44264-1986 ADAPTER KIT, M-1 CAP; FOR CANTEEN, WATER, INSULATED
MIL MIL-A-7021C-1974 ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER AND HIGH TEMPERATURE RESISTANT GASKETS (SUPERSEDING MIL-A-7021B)
AWWA DSS93014 Facing the Heat: Heat Exchangers and Your Drinking Water
AWWA ACE93206 Facing the Heat: Heat Exchangers and Your Drinking Water

YU-JUS

JUS M.E6.203-1984 Water central heating plants. Hot water heating with flow temperature above 110°C and pressure in exess of 0,5 bar overpressure. Safety reguirements and assembly
JUS U.S4.033-1997 Typical construction ofsurface water drainage -Aqueduct - Foundation concrete pipes for inclination bigger than 6 %

Standard Association of Australia （SAA）

AS 4032.4:2014 Water supply — Valves for the control of heated water supply temperatures, Part 4: Thermostatically controlled taps for the control of heated water supply temperatures

CZ-CSN

CSN 25 7814-1980 Vortical screw-type water meters; up-to200°C
CSN 25 7813-1980 Vortical screw-type water meters; up-to 95 °C
CSN ON 02 7215-1963 Thermometer cell for high speed flow. For resistance thermometers, electric thermometers and glass thermometers
CSN 25 7806-1980 Multi-flow turbine water meters; up-to 95 °C
CSN 25 7805-1980 Multi-flow turbině water meters; up-to 30 °C
CSN 25 7804-1980 Single-flow turbině water meters; up-to 95 °C
CSN 25 7816-1980 Combined vertical water meters; up-to 30 °C
CSN 25 7812-1980 Vertical screw-type water meters; up-to 30 °C
CSN 25 7818-1980 Volumetric drum-type water meters; up-to 90 °C

American Society for Testing and Materials (ASTM)

ASTM E667-98(2003) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM E667-98 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM F2623-24 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
ASTM E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

British Standards Institution (BSI)

BS EN ISO 22391-3:2009+A2:2021 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) - Fittings
BS EN ISO 22391-2:2009+A1:2020 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) - Pipes
PD CEN ISO/TS 22391-7:2018 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Guidance for the assessment of conformity
BS EN ISO 22391-5:2009+A1:2020 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) - Fitness for purpose of the system

PT-IPQ

NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes
NP EN 10267-2000 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

GSO

GSO OIML R7:2010 CLINICAL THERMOMETERS (mercury-in-glass, with maximum device)
BH GSO ISO 22391-1:2016 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
BH GSO ISO 22391-2:2016 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
OS GSO ISO 22391-3:2013 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
GSO 665:1997 VERIFICATION METHOD OF CLINICAL THERMOMETERS (mercury-in-glass, with maximum device)
GSO ISO/TS 7024:2009 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-thermoplastics- Recommended practice for installation
OS GSO 2126:2011 Oil & Gas Flanges Specifications – Forged Steel Weld Neck Flanges for Low, Intermediate and High Temperature Service

GM Daewoo

GMKOREA EDS-M-1910-2011 Ductile Cast Irons For Elevated Temperature Service

Association Francaise de Normalisation

NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
NF EN 10269:2013 Steels and nickel alloys for fasteners used at high and/or low temperatures
NF EN ISO 22391-3:2010 Plastic piping systems for hot and cold water installations - Higher temperature resistant polyethylene (PE-RT) - Part 3: fittings
NF EN ISO 22391-1:2010 Plastic piping systems for hot and cold water installations - Higher temperature resistant polyethylene (PE-RT) - Part 1: general
NF EN ISO 22391-2:2010 Plastic piping systems for hot and cold water installations - Higher temperature resistant polyethylene (PE-RT) - Part 2: tubes
NF EN IEC 60216-6:2023 Electrical insulating materials - Thermal endurance properties - Part 6: determination of the thermal endurance indices (IT and ITR) of an insulating material using the fixed duration raster method

American National Standards Institute （ANSI)

ANSI/AWWA C200-2012 Steel Water Pipe - 6 In. (150 mm) and Larger
ANSI/AWWA D107-2016 Composite Elevated Tanks for Water Storage
ANSI/TAPPI T464 om-2012 Water vapor transmission rate of paper and paperboard at high temperature and humidity

(U.S.) Ford Automotive Standards

FORD M1C157-A-1991 GREASE - HIGH TEMPERATURE WATER RESISTANT - NO.2 GRADE
FORD M1C7A-1991 GREASE - HIGH TEMPERATURE - WATER RESISTANT NO.1, 2, 3 GRADES
FORD M1C211-A-1991 GREASE - HIGH TEMPERATURE, WATERPROOF, EXTREME PRESSURE, NON-LEADED
FORD ESB-M1C31-B-2008 GREASE, HIGH TEMPERATURE, WATERPROOF WITH FILLER, NLGI #1 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M1C161-B-2004 GREASE, SYNTHETIC - HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***

BR-ABNT

ABNT P-EB-334-1970 Seamless carbon steel pipes for high temperature environments (1)

International Federation of Trucks and Engines

NAVISTAR MPAPS G-9015-2021 Painted Metal Parts for High-Heat Resistance
NAVISTAR TMS 9015-2010 Painted Metal Parts for High-Heat Resistance

RU-GOST R

GOST 12308-2013 Thermostable fuels T-6 and T-8B for jet engines. Specifications

Natural Gas Processor's Association (NGPA)

GPA RR-65-1983 Vapor-Liquid Equilibria for Sour Water Systems at High Temperatures
GPA TP-8-1982 Solubility of Carbon Dioxide in Propylene Carbonate at Elevated Pressures & Higher Than Ambient Temperatures

American Welding Society (AWS)

WRC 143:1969 Cast Heat-Resistant Alloys for High-Temperature Weldments
WRC 524:2009 Modern Vanadium Steels for High Temperature Petroleum Reactors

Danish Standards Foundation

DS/EN ISO 22391-3:2010 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings

HU-MSZT

MSZ 14121-1968 The water temperature of boiling water steam heating equipment is higher than 110 degrees (safety guarantee pressure is above 0.5). Installation and placement of equipment

IT-UNI

UNI EN ISO 22391-3:2021 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings

Lithuanian Standards Office

LST EN 60749-6-2003 Semiconductor devices. Mechanical and climatic test methods - Part 6: Storage at high temperature (IEC 60749-6:2002)

WRC - Welding Research Council

BULLETIN 143-1969 CAST HEAT-RESISTANT ALLOYYS FOR HIGH-TEMPERATURE WELDMENTS
BULLETIN 524- MODERN VANADIUM STEELS FOR HIGH TEMPERATURE PETROLEUM REACTORS

Institute of Electrical and Electronics Engineers (IEEE)

IEEE C57.154-2022 IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems
IEEE Std C57.154-2022 IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems

Others: water temperature above 6