Fixed mobile phase

Fixed mobile phase, Total:130 items.

The international standard classification for "Fixed mobile phase" includes: Electrical equipment of ships and of marine structures , Physicochemical methods of analysis , Ceramics in general .

The Chinese standard classification for "Fixed mobile phase" includes: Electrical, observation/communication and navigation equipment for vessel in general , Basic standards and general methods , Daily use glass, ceramic, enamel and plastic products in general , Ceramic and glass in general .

未注明发布机构

JIS C 9303:1993(1998) Stationary type single phase AC spot welding machines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 40244-2021 Chemicals - Liquid or solid identification - Fluidity test method
GB/T 21066-2007 Electrical installations of ships and mobile and fixed offshore units—Procedures for calculating short-circuit currents in three-phase a.c.

Professional Standard - Ocean

HY/T 0344-2022 Determination of Trace Active Phosphate in Seawater Flow Analysis-Phosphomolybdenum Blue Solid Phase Extraction-Spectrophotometry
HY/T 0347-2022 Determination of seawater trace ammonium—Flow analysis,solid phase extraction and o-phthaldialdehyde fluorescence detection

Group Standards of the People's Republic of China

T/ZZB 3063-2023 Solid-liquid two-phase flow hydraulic diaphragm pump

Taiwan Provincial Standard of the People's Republic of China

CNS 14668-2002 Method of test for freezing point of aviation fuels(automatic phase transition method)

Professional Standard - Light Industry

QB/T 1545-2015 Test method for relative viscosity||relative liquidity and thixotropy of ceramic
QB/T 1545-1992 Measurement Method for Relative Viscosity, Flowability and Thixotropy of Ceramic Slurry

Shandong Provincial Standard of the People's Republic of China

DB37/T 4148-2020 Determination of Water Quality 2,4-D by Solid Phase Extraction-Liquid Chromatography
DB37/T 4157-2020 Determination of Carbofuran in Water by Solid Phase Extraction-Liquid Chromatography
DB37/T 4161-2020 Determination of Water Quality Aldicarb Solid Phase Extraction-Liquid Chromatography
DB37/T 4155-2020 Determination of Water Quality Chlorpyrifos Solid Phase Extraction-Liquid Chromatography

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1495-2017 Determination of Solid Phase Free Radical Content in Cigarette Mainstream Smoke by Electron Spin Resonance Spectroscopy

Lithuanian Standards Office

LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)

Japanese Industrial Standards Committee (JISC)

JIS C 9303:2005 Stationary type single phase AC spot welding machines
JIS C 9303:1993 Stationary type single phase AC spot welding machines
JIS B 9933:2000 Hydraulic fluid power -- Fluids -- Code for defining the level of contamination by solid particles

Korean Agency for Technology and Standards (KATS)

KS C 9604-2014 STATIONARY TYPE SINGLE PHASE AC SPOT WELDING MACHINES
KS C 9604-1989(2010) STATIONARY TYPE SINGLE PHASE AC SPOT WELDING MACHINES
KS C 9604-1980 STATIONARY TYPE SINGLE PHASE AC SPOT WELDING MACHINES
KS C 9604-1989 Stationary Type Single Phase AC Spot Welding Machines
KS I ISO 14164-2021 Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method
KS I ISO 14164-2006(2016) Stationary source emissions－Determination of the volume flowrate of gas streams in ducts(Automated method)
KS I ISO 14164:2021 Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method
KS C IEC 61363-1-2003(2008) Electrical installations of ships and mobile and fixed offshore units－ Part 1：Procedures for calculating short-circuit currents in three-phase a.c.
KS C IEC 61363-1-2013 Electrical installations of ships and mobile and fixed offshore units－ Part 1：Procedures for calculating short-circuit currents in three-phase a.c.
KS C IEC 61363-1:2003 Electrical installations of ships and mobile and fixed offshore units- Part 1:Procedures for calculating short-circuit currents in three-phase a.c.
KS C IEC 61363-1:2013 Electrical installations of ships and mobile and fixed offshore units- Part 1:Procedures for calculating short-circuit currents in three-phase a.c.
KS I ISO 25139-2023 Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography
KS I ISO 14164:2006 Stationary source emissions－Determination of the volume flowrate of gas streams in ducts(Automated method)
KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS I ISO 10780:2008 Stationary source emissions-Measurement of velocity and volume flowrate of gas streams in ducts
KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids

British Standards Institution (BSI)

BS IEC 61363-1:1998 Electrical installations of ships and mobile and fixed offshore units. Procedures for calculating short-circuit currents in three-phase a.c.
BS IEC 61363-1:2002 Electrical installations of ships and mobile and fixed offshore units - Procedures for calculating short-circuit currents in three-phase a.c
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
22/30396229 DC BS IEC 61363-1. Electrical installations of ships and mobile and fixed offshore units - Part 1. Procedures for calculating short-circuit currents in three-phase a.c.
BS 2131:1956 Specification for fixed capacitors for D.C. for use in telecommunication and allied electronic equipment
25/30514580 DC BS IEC 61363-1 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
BS 140:1923 Liquid starters for electric motors (d.c and a.c-phase 3 induction with slip rings)
BS EN 50122-3:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Mutual interaction of a.c. and d.c. traction systems
BS EN ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
PD CLC/TR 61800-6:2007 Adjustable speed electrical power drive systems. Guide for determination of types of load duty and corresponding current ratings

CZ-CSN

CSN 64 0215-1989 Flowability determinantion of termo- etting molding materials

Danish Standards Foundation

DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
DANSK DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
DANSK DS/EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow
DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
DANSK DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 14164:2016 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
BH GSO IEC 61363-1:2016 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
BH GSO ISO 7808:2016 Plastics - Thermosetting moulding materials - Determination of transfer flow
BH GSO ISO 25139:2017 Stationary source emissions -- Manual method for the determination of the methane concentration using gas chromatography

Spanish Association for Standardization (UNE)

UNE 77227:2001 Stationary source emissions. Determination of the volume flowrate of gas stream in ducts. Automated method.
AENOR UNE-EN ISO 7808:1999 PLASTICS - THERMOSETTING MOLDING MATERIALS - DETERMINATION OF TRANSFER FLOW (ISO 7808:1992)

GCC Standardization Organization

GSO ISO 14164:2015 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
GSO IEC 61363-1:2015 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
GSO ISO 4534:2013 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test

Comitato Elettrotecnico Italiano

CEI 18-57:2001 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in tree-phase a.c.

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0115-5 E*DIN EN 50122-3:2021-05 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
VDE 0115-5 E*DIN EN 50122-3:2008-10 Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 3: Mutual interaction of a.c. and d.c. traction systems;

Association of German Mechanical Engineers

VDI/VDE 2176-2007 Flow characteristics of control valves and their determination
VDI/VDE 2176 Blatt 1-1971 Fluidic characteristic quantities of throttle valves and their determination

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61363-1:2015 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
OS GSO ISO 7808:2013 Plastics - Thermosetting moulding materials - Determination of transfer flow
OS GSO ISO 25139:2015 Stationary source emissions -- Manual method for the determination of the methane concentration using gas chromatography

Ente Nazionale Italiano di Unificazione

UNI EN ISO 16911-1:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
UNI 9968:1992 Stationary source emission measurements. Conveyed gas flows. Determination of combustion gases in conveyed gas flows. Gas-chromatography method.
UNI EN ISO 7808:2000 Plastics - Thermosetting moulding materials - Determination of transfer flow
UNI EN 14770:2006 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
UNI EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
UNI 4267:1959 Tests on thermosetting plastics. Determination of the apparent density of moulding materials freely flowing through a funnel.
UNI 4290:1959 Tests on thermosetting plastics. Determination of resistance to tracking.

American National Standards Institute （ANSI)

ANSI/NFPA T3.21.3-1990 Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components
ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)

International Electrotechnical Commission (IEC)

IEC 61363-1:1998 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.

Association Francaise de Normalisation

NF E48-201:1999 Hydraulic fluid power. General rules relating to systems.
NF E49-201:1999 Pneumatic fluid power. General rules relating to systems.
NF EN ISO 25139:2011 Emissions from stationary sources - Manual method for the determination of methane concentration by gas chromatography
NF X43-356*NF EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography.
NF S61-922:1999 Service activities relating to the maintenance of portable, mobile and fixed fire extinguishers
NF T60-232:2009 Animal and vegetable fats and oils - Determination of composition of the sterol fraction - Method by gas chromatography.
NF EN ISO 4534:2011 Vitrified enamels - Determination of flow behavior - Flow test

National Electrical Manufacturers Association（NEMA)

NEMA MG 10-2001(R2007) Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
NEMA MG 10-2001 ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF FIXED FREQUENCY MEDIUM AC SQUIRREL-CAGE POLYPHASE INDUCTION MOTORS

Bureau of Indian Standards

IS 14577-1-2023 Electrical Installations Of Ships And Mobile And Fixed Offshore Units Part 1 Procedures For Calculating Short Circuit Currents In Three-Phase A.C.

CEN - European Committee for Standardization

EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow

International Organization for Standardization (ISO)

ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
ISO 10780:1994 Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts

German Institute for Standardization

DIN EN ISO 7808:1998-10 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998
DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998
DIN 66140:2022 Capillary flow porometry - Measurement of through pores in solids
DIN EN 137100:1998 Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997
DIN ISO 14164 E:2002 Draft Document - Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (ISO 14164:1999)
DIN EN 137100:1998-03*VDE 0560-810:1998-03 Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications
DIN 66140:2022-02 Capillary Flow Porosimetry Measurement of Through-Pore Diameters in Solids
DIN 66140:2021-06 Draft Document - Capillary Flow Porometry - Measurement of through pores in solids
DIN EN 137000:1998 Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997
DIN 14680:2007 Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN EN 137101:1998 Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995

Standard Association of Australia （SAA）

AS C356.2:1966 Stationary type spot and projection resistance welding equipment (single-phase a.c. transformer type)
AS C46:1927 Liquid starters for electric motors (D.C. and A.C. 3-phase induction with slip rings)

U.S. Air Force

AIR FORCE A-A-58057 A VALID NOTICE 1-2013 Processing Machine, Radiographic Film, Automatic, Stationary

European Committee for Electrotechnical Standardization（CENELEC）

EN 137100:1995 Sectional Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Motor Starter Applications Qualification Approval
EN 137000:1995 Generic Specification Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Use with Motors
EN 137101:1995 Blank Detail Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non-Solid Electrolyte for Motor Starter Applications Qualifications Approval

Gosstandart of Russia

GOST 33197-2022 Aviation fuels. Determination of freezing point by automatic phase transition method
GOST 33197-2014 Aviation Fuels. Determination for freezing point by automatic phase transition method

NL-NEN

NEN 6361-1988 Vegetable and animal oils and fats Determination of solid phase fraction by pulsed nuclear magnetic resonance (pulsed NMR)

American Society for Testing and Materials (ASTM)

ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D6073-08a Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D6073-08a(2013) Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM RR-D15-1020 2001 D6660-Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

Standards Norway

NS 4170:2008 Flow of person-related information in education
NS-EN ISO 7808:1998 Plastics — Thermosetting moulding materials — Determination of transfer flow (ISO 7808:1992)

National Association of Corrosion Engineers (NACE)

NACE Paper 04068-2014 Study on flow pattern and water wettability in oil-water two-phase flow
NACE Paper 00050-1998 Calculation of Liquid-Gas Flow and Mass Transfer in Multiphase Flow
NACE Paper 07408-2016 Hydrodynamic and Phase Wetting Criteria to Assess Corrosion Risk in Two-Phase Oil-Water Pipe Flow
NACE Paper 08566-2008 Determination of the wetting phase in oil-water two-phase flow in pipelines

RO-ASRO

STAS 9544/1-1974 TOTALLY ENCLOSED SHORT CIRCUITED ROTOR THREE PHASE INDUCTION MOTORS FOR GENERAL PURPOSE Correlation of output powers with fixing dimensions
STAS 5991-1991 Thermobardening plastics FLOW CAPACITY DETERMINATION OF MOULDING MATERIALS BY RASCHIG METHOD
STAS 9544/2-1974 TOTALLY ENCLOSED WOUND ROTOR THREE PHASE INDUCTION MOTORS FOR GENERAL PURPOSE Correlation of output-powers with fixing dimensions
STAS 10768/2-1987 Hydraulic drives FLOW CONTROL VALVES FOR STATIONARY EQUIPMENTS pn 200 bar Main dimensions

American Industrial Hygiene Association （AIHA)

ASSE 1034-1981 Performance Requirements for Fixed Flow Restrictors

Swedish Institute for Standards

SS-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

Magyar Szabványügyi Testület

MNOSZ 15936-1953 Water conveyance building channel fixed round liquid flow equipment

IN-BIS

IS 3944-1982 How to measure flow time using a flow cup
IS 10844-1984 Glossary of terms related to sliding fasteners