Test groove

Test groove, Total:181 items.

The international standard classification for "Test groove" includes: Milling tools , Energy and heat transfer engineering in general , Steels profiles , Keys and keyways, splines .

The Chinese standard classification for "Test groove" includes: Cutting tools , New energy and others , Profile steel and deformed steel , Chain drive, belt drive and key joint , Thermal Measurement , Turnout and steel rail expansion piece .

Hebei Provincial Standard of the People's Republic of China

DB13/T 5294-2020 Performance test method of miniature pure water electrolyzer system

Taiwan Provincial Standard of the People's Republic of China

CNS 8502-1982 Method of test for slotted light gage angles
CNS 5374-1980 V Type Trough Conveyor Chain for Mine
CNS 3600-1988 T-Slot Cutters
CNS 8501-1982 Slotted light gage steel

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6124.1-1996 T-slot cutters. Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks
GB/T 6339-1986 Dovetail and inverse dovetail milling cutters with flatted parallel shanks
GB/T 16922-1997 Thin taper keys and their corresponding keyways
GB/T 37-1988 Bolts for T-Slot
GB/T 6124.2-1996 T-slot cutters. Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes
GB/T 37613-2019 Embedded channel steel
GB/T 6124-2007 T-slot cutters—Types and sizes
GB/T 45541-2025 Testing method for proton exchange membrane electrolyzer performance

Group Standards of the People's Republic of China

T/CSEB 0005-2018 Testing method for determining dynamic fracture toughness of rock materials by the Chevron Notched Semi-circular Bending specimen
T/GES 008-2024 Intensive bus duct
T/JSQA 059-2020 Closed insulated busby trunking systems

Professional Standard - Machinery

JB/T 13690-2019 Cast resin busway

National Metrological Verification Regulations of the People's Republic of China

JJG 1030-2010 Technical performance test specification for constant temperature bath

National Metrological Technical Specifications of the People's Republic of China

JJF 1030-1998 Measurement and Test Norm of Thermostatic Bath's Technological Characteristic
JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath’s Metrological Characteristics

Professional Standard - Railway

TB/T 3110-2005 33 kg/m channel for guardrails
TB/T 3110-2018 33kg/m channel for guardrails

German Institute for Standardization

DIN 2217-2:1973-02 Driving Elements; Grooved Pulleys for V-belts; Testing of Grooves
DIN 10512:2008 Food hygiene - Commercial dishwashing with onetank-dishwashers - Hygiene requirements, type testing
DIN EN ISO 8745:1998 Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
DIN EN ISO 8744:1998 Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
DIN 6461:1966-08 Wood bits; short type straight flute bits (straight flute drills) / Note: To be replaced by DIN 6442 (2019-12).
DIN 6461:1966 Wood bits; short type straight flute bits (straight flute drills)
DIN 508:1979 Nuts for T-slots
DIN 508:2002 Nuts for T-slots
DIN 508:2004-06 Nuts for T-slots
DIN EN ISO 13337:1998 Spring-type straight pins - Slotted, light duty
DIN 1474:1978 Steckkerbstifte DIN
DIN 508:2002-06 Nuts for T-slots
DIN 649:2010 T-slots for T-head bolts
DIN 508:1977 Nuts for T-slots
DIN 1481:1978 Spring loaded straight pin with slot heavy duty type
DIN 69638:1984-03 Machine tools; slotted profiles and spacing of slots; dimensions
DIN 650:1989 Machine tools; T-slots; dimensions
DIN 6885-1:1968-08 Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 649 E:2009-08 Draft Document - T-slots for T-head bolts
DIN 649 E:2009 Draft Document - T-slots for T-head bolts
DIN EN ISO 8752:1998-03 Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997)

Indonesia Standards

SNI 02-0840-1989 Mesin pelayu teh jenis palung, Cara uji unjuk kerja
SNI 05-4963-1999 Testing shafts
SNI 05-6022-1999 T-slot nuts
SNI 07-3689-1995 Method of Y-groove weld cracking test
SNI 07-3688-1995 Method of U-groove weld cracking test
SNI 4412:2015 Mesin pengering - Tipe bak datar - Syarat mutu dan metode uji

GCC Standardization Organization

GSO ISO 14556:2013 Steel -- Charpy V-notch pendulum impact test -- Instrumented test method
GSO OIML R150-2:2023 Continuous totalising automatic weighing instruments of the arched chute type - Part 2 : Test procedures

Polski Komitet Normalizacyjny (PKN)

PN E06203-1993 Test methods for induction channel furnaces
PN M82159-1986 Hexagon chin slotted and casde nuts
PN BN 2201-01-1964 Pool type equipment. diameter
PN T06562-1971 Microwave measuring instruments Measuring lines General requirements and tests

Austrian Standards

ONORM EN 28745-1993 Grooved pins - Half-Iength taper grooved
ONORM M 6505-1985 Drives using V-belts and grooved pulleys; grooved pulleys; inspection of grooves
ONORM DIN 508-1993 Nuts for T-slots Ecrous pour rainures en T

Netherlands Institute for Standardization

NEN 7087-1990 Vetafscheiders en slibvangputten Type-indeling, eisen en beproevingsmethoden
NEN 2606-1980 One third length centre grooved pins

Bureau of Indian Standards

IS 2308-1963 Grooving machine test chart
IS 2308-1989 Test Chart For Slotting Machines
IS 2642-1985 T-slot spacing
IS 8081-1976 Slotted profile specifications
IS 2668-1978 T-slot milling cutter specifications

Korean Agency for Technology and Standards (KATS)

KS B 0870-1995(2011) Method of y-groove weld cracking test
KS B 0902-2004 T SLOTS
KS B 1056-1982 Crossrecessed head wood screws
KS B 1056-1999 Crossrecessed head wood screws
KS B 1039-2022 T-slot nuts
KS B 1039-2017 T-slot nuts
KS B ISO 13337-2020 Spring-type straight pins — Slotted, light duty
KS B ISO 13337:2020 Spring-type straight pins — Slotted, light duty
KS B ISO 13337:2008 Spring-type straight pins－Slotted, light duty
KS B 0904-2004 SPACING OF PARALLEL T SLOTS
KS F 4016-2003 Reinforced concrete gutters

American National Standards Institute （ANSI)

ANSI/ASME B5.1M-1985 T-Slots – Their Bolts, Nuts, and Tongues
ANSI/ASME B18.25.1M-1996 Square and Rectangular Keys and Keyways
ANSI/EIA 364-78B:2010 Cavity-to-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors

British Standards Institution (BSI)

BS EN ISO 8745:1998 Grooved pins - Half-length taper grooved
BS EN ISO 8744:1998 Grooved pins - Full-length taper grooved
BS EN ISO 8741:1998 Grooved pins - Half-length reverse-taper grooved
BS EN ISO 7263-1:2019 Corrugating medium. Determination of the flat crush resistance after laboratory fluting - A-flute
BS EN ISO 8740:1998 Grooved pins - Full-length parallel grooved, with chamfer
BS EN ISO 8739:1998 Grooved pins - Full-length parallel grooved, with pilot
BS EN ISO 13337:1998 Spring-type straight pins. Slotted, light duty
BS EN 28752:1993 Spring-type straight pins, slotted

Japanese Industrial Standards Committee (JISC)

JIS B 0952:1987 T slots
JIS B 1167:2011 T-Slot nuts
JIS B 1167:1994 T-Slot nuts
JIS B 1167:2001 T-Slot nuts
JIS B 1166:2009 T-Slot bolts
JIS B 1166:1995 T-Slot bolts
JIS B 4217:1988 T-slot cutters
JIS B 0953:1987 Spacing of parallel T slots
JIS B 4217:1998 Milling cutters -- T-slot cutters
JIS B 1855:1991 Grooved pulleys for narrow V-belts

Belgian Standards Institute

NBN-EN 28745-1992 Grooved pins - Half-length taper grooved
NBN-EN 28744-1992 Grooved pins - Full-length taper grooved
NBN-EN 28743-1992 Grooved pins - Half-length centre grooved
NBN-EN 28741-1992 Grooved pins - Half-length reverse taper grooved
NBN-EN 28739-1992 Grooved pins - Full-length parallel grooved, with pilot
NBN-EN 28740-1992 Grooved pins - Full-length parallel grooved, with chamfer
NBN-EN 28742-1992 Grooved pins - Third-length centre grooved
NBN 142-1961 T-slot machines and accessories

Danish Standards Foundation

DS/ISO 8745:1988 Grooved pins. Half-length taper grooved
DS/ISO 8743:1988 Grooved pins. Half-length centre grooved
DS/ISO 8744:1988 Grooved pins. Full-length taper grooved
DS/ISO 8741:1988 Grooved pins. Half-length reverse taper grooved
DANSK DS/EN 28749:1992 Pins and grooved pins - Shear test
DS/EN 1462:2005 Brackets for eaves gutters - Requirements and testing
DS/EN ISO 8752:2009 Spring-type straight pins - Slotted, heavy duty
DS/EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty
DS/ISO 8742:1988 Grooved pins. Third-length centre grooved
DS/ISO 8740:1988 Grooved pins. Full-length parallel grooved, with chamfer

International Organization for Standardization (ISO)

ISO 8745:1986 Grooved pins; Half-length taper grooved
ISO 8743:1986 Grooved pins; Half-length centre grooved
ISO 8744:1986 Grooved pins; Full-length taper grooved
ISO 8741:1986 Grooved pins; Half-length reverse taper grooved
ISO 8742:1986 Grooved pins; Third-length centre grooved
ISO 8740:1986 Grooved pins; Full length parallel grooved, with chamfer
ISO 7263-1:2018 Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute
ISO 3337:2000 T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
ISO 3337:1975 Title missing - Legacy paper document
ISO 13337:2009 Spring-type straight pins - Slotted, light duty

European Committee for Standardization (CEN)

EN 28744:1992 Grooved pins; full-length taper grooved (ISO 8744:1986)
EN 28741:1992 Grooved pins; half-length reverse taper grooved (ISO 8741:1986)
EN 28745:1992 Grooved pins; half-length taper grooved (ISO 8745:1986)
EN 28743:1992 Grooved pins; half-length centre grooved (ISO 8743:1986)
EN 28742:1992 Grooved pins; third-length centre grooved (ISO 8742:1986)
EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty
EN ISO 7263-1:2019 Corrugating medium - Determination of the f lat crush resistance after laboratory f luting - Part 1: A-flute

Ente Nazionale Italiano di Unificazione

UNI EN 12814-7:2003 Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
UNI 7339:1981 T-slot cutters.
UNI ISO 2351:1990 Screwdriver bits for slotted head screws, with male hexagon drive.
UNI EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty
UNI EN ISO 8752:2000 Spring-type straight pins - Slotted, heavy duty.
UNI EN ISO 13337:2000 Spring-type straight pins - Slotted, light duty.
UNI EN ISO 8752:2009 Spring-type straight pins - Slotted, heavy duty
UNI EN ISO 14584:2003 Hexalobular socket raised countersunk head screws

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO OIML R150-2:2023 Continuous totalising automatic weighing instruments of the arched chute type - Part 2 : Test procedures
BH GSO ISO 8333:2016 Liquid flow measurement in open channels by weirs and flumes -- V-shaped broad-crested weirs

Swedish Institute for Standards

SIS STS-1-1932 Tool profile, grooved and double grooved wooden grooves for wood, (types TG and DTG)
SS-EN 1462:1997 Brackets for eaves gutters - Requirements and testing
SS-EN 28752:1993 Spring-type straight pins, slotted
SIS STS-3-1932 Tool Profile, Folded (Half-Slot) Surface Wood Channel, (Types R and RV)

Spanish Association for Standardization (UNE)

UNE-EN 1462:2006 Brackets for eaves gutters - Requirements and testing
AENOR UNE-EN 28749:1993 PINS AND GROOVED PINS. SHEAR TEST. (ISO 8749:1986).
UNE-EN ISO 8752:1998 SPRING-TYPE STRAIGHT PINS. SLOTTED, HEAVY DUTY. (ISO 8752:1997).

Türk Standardları Enstitüsü

TS 529-1967 T SLOTS FOR MACHINE TOOLS

Czech Standards Institute (UNMZ)

CSN 02 1124-1962 Bolts for T-slots
CSN ON 11 1775-1966 T-slot nut
CSN 22 3595-1969 Left-hand recessing tools for external recesses of F and G Iorms
CSN 22 1833-1987 Broaching tools. Six-groove pull broaches
CSN 22 3594-1969 Right-hand recessing tools for external recesses of F and G forms
CSN 22 3597-1969 Metal cutting tools. Recessing tools for holder fixing for A, B, D and E-shaped recesses
CSN 63 5818-1962 Grooved rubber springs

Lithuanian Standards Office

LST EN 1462-2004 Brackets for eaves gutters - Requirements and testing
LST EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
LST EN ISO 8752:2009 Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)

Defense Logistics Agency

DLA MS35673 REV A-1965 PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, BRASS
DLA MS35673 REV A REINST NOTICE 2-2005 PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, BRASS

Society of Automotive Engineers (SAE)

SAE AMS1537A-1992 Cleaner@ Alkaline Hot-Tank Type
SAE AMS1537B-2018 Cleaner, Alkaline Hot-Tank Type

Gosstandart of Russia

GOST 7063-1972 T-slot cutters. Specifications
GOST 12492.1-1990 Agricultural machinery. Channel section. Dimensions
GOST 12492.2-1990 Agricultural machinery. Low-channel section. Dimensions

Canadian General Standards Board （CGSB)

CGSB 39-GP-38A-1975 Norme: Ves Et Etriers De Serrage

International Truck and Engine Corporation (ITEC)

INTERN ESP J-4.204-1989 Groove Pins - Deep Groove Type A

Association Francaise de Normalisation

NF E25-772*NF EN ISO 8740:1997 Grooved pins. Full length paralled grooved, with chamfer.
NF E25-775:1997 Spring-type straight pins. Slotted, light duty.
NF E25-773:1997 Spring-type straight pins. Slotted, heavy duty.

American Society of Mechanical Engineers (ASME)

ASME B5.31-1953 Involute tooth profile keyway and tooth profile tolerances and measurements

Yugoslav Association for Standardization

JUS K.D2.137-1984 Tslot cutters. Technical requirements

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM35792-1998 Handle, Bail Chest, Recessed

Magyar Szabványügyi Testület

MSZ 18880-1960 Large mechanical tank. Front channel 85mm built-in edge

Standard Association of Australia （SAA）

AS 1462.24:2003 Methods of test for plastics pipes and fittings - Determination of resistance to crack propagation - Test methods for slow crack growth in notched pipes (notch test)

Cuban Institute of Standards and Metrology

NC 07-04-1969 Grooved pulleys for V-belts Dimensions

GM North America

GM VOL I SEC E-1963 Section E - Tee Nuts

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8333:2015 Liquid flow measurement in open channels by weirs and flumes -- V-shaped broad-crested weirs

Standards Norway

NS-EN ISO 13337:1997 Spring-type straight pins — Slotted, light duty (ISO 13337:1997)