Dirty
Dirty, Total:92 items.
The international standard classification for "Dirty" includes: Equipment for the chemical industry , Enamels , Measurement of volume, mass, density, viscosity .
The Chinese standard classification for "Dirty" includes: Mechanics Measurement , Non-metal chemical machinery equipment , Chemical machinery and equipment in general , Mechanical quantity instrument, automatic weighing equipment and other measuring instrument , Ornamental plant .
National Metrological Verification Regulations of the People's Republic of China
- JJG 649-2016 Verification Regulation of Digital Weighing Indicator
- JJG 669-2003 Load Cell
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 7996-2020 Norminal capacity and diameter of glass-lined equipment
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 7551-1997 Load cells
- GB/T 7551-2008 cells
- GB/T 8854-1988 Vegetables--Nomenclature--First list
- GB/T 7996-2013 Nominal Capacity and Diameter of Glass-lined Equipment
- GB/T 7996-1987 Nominal volume and nominal diameter for glass-lined vessel
- GB/T 7996-2006 Hydraulic fluid power - Pressure-reducing valves sequence valves unloading valves throttle valves and check valves - Mounting surfaces
Taiwan Provincial Standard of the People's Republic of China
- CNS 709-1956 Nominal Diameter for Pipe
Military Standard of the People's Republic of China-General Armament Department
- GJB 1553-1992 Ship weighing
Professional Standard - Forestry
- LY/T 1576-2000 Names of ornamental plants
Group Standards of the People's Republic of China
- T/CFPMA 0007-2019 Dried noodle weighing machine
- T/JHGG 003-2022 Clean dispensing booth
British Standards Institution (BSI)
- BS ISO 11377:1998 Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation
- BS 6905:1987 Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
HU-MSZT
- MNOSZ 3404-1951 Magazine name. abbreviation
- MSZ 10063-1960 Laboratory scale 1000g airlock scale
- MSZ 10062-1960 Laboratory scale 500g oil brake scale
- MSZ 6192-1980 Weighing grain and its weighing accuracy
International Electrotechnical Commission (IEC)
- IEC 60169-29:1995 Radio frequency connectors - Part 29: Miniature r.f. coaxial connectors with screw-, push-pull, and snap-on coupling or slide-in rack and panel applications - Characteristic impedance 50 ohms (type 1, 0/2, 3)
Association Francaise de Normalisation
- NF EN ISO 2858:2011 End suction centrifugal pumps (nominal pressure 16 bar) - Designation, nominal operating point and dimensions
- NF J41-417:1957 Shipbuilding. Kingston valves, nominal bore 200-500 mm. Nomenclature of parts.
YU-JUS
- JUS B.A4.058-2001 Geological designations and symbols Structural designations
- JUS H.P0.005-1984 Pesticides. Insecticides. Common names, chemical names andsynonyms
- JUS H.P0.006-1985 Pesticides. Herbicides. Common names, chemical names and synonyms
- JUS H.P0.007-1985 Pesticides. Acaricides. Common names, chemical names and synonyms
GSO
- GSO 399:1994 Pressure pipeline components -Definition of nominal size (Nominal diameter)-Nominal pressure.
- OS GSO 399:1994 Pressure pipeline components -Definition of nominal size (Nominal diameter)-Nominal pressure.
- BH GSO ISO 1190-1:2016 Copper and copper alloys -- Code of designation -- Part 1: Designation of materials
Japanese Industrial Standards Committee (JISC)
- JIS B 7606:1997 Belt weighers
- JIS B 7608:1995 Domestic weighing instruments
SCC
- NS-ISO 2157:1984 Dental rotary instruments — Nominal sizes and designation
- AENOR UNE-EN 10027-1:2017 Steel designation systems. Part 1: Symbolic designation.
- DANSK DS/EN 10027-1:2016 Designation systems for steels – Part 1: Steel names
- NS-EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
- CAN/CGSB-4.158-1975(R2013) Designation of Yarns
- NS 2559:1966 Deck designations
- CAN/CGSB-4.158-1975(C2013) Wire designation
- BS 6828-2:1987 Dental rotary instruments-Specification for nominal sizes and designations
- AENOR UNE-EN ISO 2858:2011 Centrifugal axial suction pumps (nominal pressure 16 bar). Designation, nominal operating point and measurements. (ISO 2858:1975)
- DANSK DS/EN ISO 2157:2016 Dentistry – Nominal diameters and designation code numbers for rotary instruments
- BS 1831-1:1985 Common names for pesticides-Guide to principles for selection of common names
- BS 6101-5:1984 Machine tool ball screws-Specification for nominal diameters and nominal leads
US-FCR
- FCR 21 CFR PART 299-2015 DRUGS; OFFICIAL NAMES AND ESTABLISHED NAMES
- FCR 21 CFR PART 299-2014 DRUGS; OFFICIAL NAMES AND ESTABLISHED NAMES
- FCR 21 CFR PART 299-2013 DRUGS; OFFICIAL NAMES AND ESTABLISHED NAMES
GOST
- GOST R 70817-2023 Steel and alloys. Names and basic designations of brands
International Organization for Standardization (ISO)
- ISO 2157:1984 Dental rotary instruments — Nominal sizes and designation
Korean Agency for Technology and Standards (KATS)
- KS P 7425-1993 Dental rotary instruments-Nominal sizes and designation
- KS P ISO 2157:2019 Dentistry — Nominal diameters and designation code numbers for rotary instruments
- KS B 6409-1982 Load Cell
- KS D ISO 1190-1-2015 Cooper and copper alloys－Code of designation－Part 1：Designation of materials
- KS B 0200-2019 Designation of screw threads
- KS B 6409-2014(2019) Load Cell
- KS A 0012-1998 Names of light-source colours
- KS A 0012-2015(2020) Names of light-source colours
- KS B 6409-2019 Load Cell
RU-GOST R
- GOST 2.309-1973 Designations system for design documentation. Designations of surface finish
- GOST R 50349-1992 Dental rotary instruments. Nominal sizes and designation
German Institute for Standardization
- DIN EN 10027-1:2017-01 Designation systems for steels - Part 1: Steel names; German version EN 10027-1:2016
- DIN 68871:2001 Furniture-designations
- DIN 5153:1973 Plane irons, denominations
- DIN 5155:1973 Chisels; denominations
- DIN EN ISO 2157:2016-10 Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016); German version EN ISO 2157:2016
- DIN 69051-2:1989 Machine tools; ball screws; nominal diameters and nominal leads
Spanish Association for Standardization (UNE)
- UNE-EN 10027-1:2006 Designation systems for steels - Part 1: Steel names
- UNE 86004-1:1979 NUMBER DESIGNATION
- UNE-EN 10027-1:2017 Designation systems for steels - Part 1: Steel names
- UNE 15439-2:1994 BALL SCREWS. PART 2: NOMINAL DIAMETERS AND NOMINAL LEADS.
- UNE-EN ISO 2157:2016 Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016)
- UNE 40018:1975 DESIGNATION OF YARNS.
AGMA - American Gear Manufacturers Association
- 08FTM06-2008 Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth
ATIS - Alliance for Telecommunications Industry Solutions
- 1000639-1995 Calling Name Identification Restriction (Formerly ATIS T1.639)
- 1000641-1995 Calling Name Identification Presentation (Formerly ATIS T1.641)
KR-KS
- KS P ISO 2157-2019 Dentistry — Nominal diameters and designation code numbers for rotary instruments
- KS B 6409-2014(2024) Load Cell
CZ-CSN
- CSN 17 7198-1964 Dimensions of weighing machine bridges
- CSN ON 70 4124-1967 weighing pipette
SE-SIS
- SIS 16 20 01-1974 Rubber. Designations
Defense Logistics Agency
- DLA A-A-50059-1983 SCALES, PERSON WEIGHING
- DLA A-A-50059 A-2008 SCALES, PERSON WEIGHING
- DLA A-A-50059 REINST NOTICE 2-2008 SCALES, PERSON WEIGHING
Canadian General Standards Board （CGSB)
- CAN/CGSB-4.158-1975 Designation of yarns
BE-NBN
- NBN E 44-001-1976 Terminal suction centrifugal pump (nominal pressure 16 bar). Name, nominal operating point and dimensions
American National Standards Institute （ANSI)
- ANSI X9.24 Part 2-2006 Retail Financial Services Symmetric Key Management Part 2: Using Asymmetric Techniques for the Distribution of Symmetric Keys
Standard Association of Australia （SAA）
- AS 1505:1978 Designation of yarns
RO-ASRO
- STAS 139-1979 DESIGNATION OF SCREW THREADS
GM North America
- GM GM6048M-1996 Engine Oils Designation SF
Indonesia Standards
- SNI 05-6093-1999 Personal weighing machines
ANSI - American National Standards Institute
- X9.24-2-2016 Retail Financial Services Symmetric Key Management Part 2: Using Asymmetric Techniques for the Distribution of Symmetric Keys
PL-PKN
- PN C89280-1986 Polyethylene Designation
say,microgram scale,Weighing,Scale,Specific gravity,Parity,microgram scale,microgram,Scale,dirty phenol,Weighing,Can drop dirty,Bacteria,Dirty,How to measure liquid in microgram,sample name,Weigh in milligrams,Weigh the pan,Symmetry,called plastic
