Reference standard measurement

Reference standard measurement, Total:246 items.

The international standard classification for "Reference standard measurement" includes: Metrology and measurement in general , Fluid power systems in general .

The Chinese standard classification for "Reference standard measurement" includes: Measurement in general , Hydraulic and pneumatic device .

Professional Standard - Agriculture

JJF 1033-2023 Rule for the Examination of Measurement Standards

National Metrological Technical Specifications of the People's Republic of China

JJF 1033-2001 Rule for the Examination of Measurement Standard
JJF 1033-2016 Rule for the Examination of Measurement Standards
JJF 1033 COR-2001 Metric Standard Assessment Specification
JJF 1033-2008 Rule for the Examination of Measurement Standard

未注明发布机构

DIN ISO 3567 E:2014-03 Vacuum gauges - Calibration by direct comparison with a reference gauge
AS 2649:2007(R2016) Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
AS ISO 13443:2007(R2016) Natural gas - Standard reference conditions
ISO 17166:1999/Amd 1:2000 Erythema reference action spectrum and standard erythema dose
API MPMS 19.4-2023 Manual of Petroleum Measurement Standards Chapter 19.4 Evaporative Loss Reference Information and Speciation Methodology
CIE 251-2023 LED Reference Spectrum for Photometer Calibration

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28783-2012 Pneumatic fluid power - Standard reference atmosphere

Group Standards of the People's Republic of China

T/CAS 554-2021 Reference checklists & key points for standard review

CU-NC

NC 90-20-12-1989 Standards System for Metrological. Assurance. Reference Standard Samples. Standardized Metrological Characteristics
NC 90-20-10-1988 Standards System for Metrological Arsurance, Carbon Steel AC-AB 3-200. Composition Reference Standards Sampie for Chemical Analysis
NC 00-38-1987 National System for Standardizaron, Metrology and Quality Control. Standard Reference Samples. General Principies

CZ-CSN

CSN 01 2841-1988 Metrology. Standard reference materials. Preparation and attestat attestation of standard reference materials of rocks and mineral raw materials
CSN ISO 389:1993 Acoustics. Standard reference zero for the calibration of pure-tone air conducation audiometers

US-FCR

FCR VA 01 42 19-2011 REFERENCE STANDARDS
FCR FED H-08-1 SEC 01090-2005 REFERENCE STANDARDS
FCR FED SPEC PUB 260-1986 NBS STANDARD REFERENCE MATERIALS CATALOG 1986-87

International Code Council

ICC IPSDC-1997 CHAPTER 12-1997 Referenced Standards
ICC IZC-1998 CHAPTER 14-1998 Referenced Standards
ICC IFGC-1997 CHAPTER 7-1997 Referenced Standards
ICC IPMC-1998 CHAPTER 8-1998 Referenced Standards
ICC IPC-1997 CHAPTER 14-1997 Referenced Standards
ICC IMC-2000 CHAPTER 15-2000 Referenced Standards
ICC IECC-1998 CHAPTER 8-1998 Referenced Standards

Building Officials and Code Administrators International(U.S.)

BOCA IZC-1998 CHAPTER 14-1998 Referenced Standards
BOCA IPSDC-1997 CHAPTER 12-1997 Referenced Standards

US-VA

VA 01 42 19-2011 REFERENCE STANDARDS

International Organization for Standardization (ISO)

ISO 5024:1999 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
ISO/R 1:1951 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS
ISO 3567:2011 Vacuum gauges - Calibration by direct comparison with a reference gauge
ISO/TS 3567:2005 Vacuum gauges - Calibration by direct comparison with a reference gauge
ISO/CIE 17166:2019 Erythema reference action spectrum and standard erythema dose
ISO 389:1985 Acoustics — Standard reference zero for the calibration of pure tone air conduction audiometers
ISO/CIE 17166:1999 Erythema reference cation spectrum and standard erythema dose
ISO 7566:1987 Acoustics; Standard reference zero for the calibration of pure-tone bone conduction audiometers
ISO 8778:1990 Pneumatic fluid power; standard reference atmosphere
ISO 8778:2003 Pneumatic fluid power - Standard reference atmosphere
ISO 4037-4:2004 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
ISO/IEC Guide 15:1977 ISO/IEC-code of principles on "reference to standards"
ISO 389:1991 Acoustics; standard reference zero for the calibration of pure-tone air conduction audiometers
ISO 4037-4:2019 Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area

RO-ASRO

STAS 1033-1968 Length measurement. Standard reference temperature
STAS SR ISO 13250-4:1995 Reference materials. Guide to the uses of certified reference materials

American National Standards Institute （ANSI)

BS EN IEC 62055-42:2022 Electricity metering. Payment systems Transaction Reference Numbers (TRN) (British Standard)
ANSI/IEEE 1076:2009 Standard VHDL Language Reference Manual
ANSI/IEEE Std1076:1993 IEEE Standard VHDL Language Reference Manual
ANSI/IEEE 1666:2005 Standard SystemC Language Reference Manual
ASME PDS-1.1-2023 Default Standards for Understanding Engineering Documentation with Incomplete Reference to Applicable Dimensioning, Tolerancing, Surface Texture, and Metrology Standards
ANSI/IEEE 1666:2006 Standard SystemC Language Reference Manual

SCC

ASA S1.8-1989(R2011) American National Standard Reference Quantities for Acoustical Levels
AASHTO R 33-2011(2019) Standard Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer
AASHTO R 33-2003 Standard Recommended Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer
AASHTO R 33-2003(2008) Standard Recommended Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer
NS-EN 13798:2010 Hydrometry — Specification for a reference raingauge pit
DANSK DS/EN 13798:2010 Hydrometry - Specification for a reference raingauge pit
NS-EN 13798:2002 Hydrometry — Specification for a reference raingauge pit
BS ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
BS 2497-5:1988 Standard reference zero for the calibration of pure tone air conduction audiometers-Specification for a standard reference zero using an acoustic coupler complying with BS 4668
NS-ISO 7566:1987 Acoustics — Standard reference zero for the calibration of pure-tone bone conduction audiometers
BS EN ISO 389:1997 Acoustics. Standard reference zero for the calibration of pure tone air conduction audiometers
BS 6950:1988 Specification for a standard reference zero for the calibration of pure tone bone conduction audiometers
UNE-EN 13798:2003 Hydrometry - Specification for a reference raingauge pit.
AS 2649:1983 Petroleum liquids and gases - Measurement - Standard reference conditions
NS 4900:1979 Petroleum liquids and gases — Measurement — Standard reference conditions
BS ISO 13443:1996 Natural gas. Standard reference conditions
DANSK DS/EN ISO 13443:2006 Natural gas - Standard reference conditions
DIN EN 13798 E:2009 Draft Document - Hydrometry - Specification for a reference raingauge pit; German version prEN 13798:2009
CIE 251:2023 LED Reference Spectrum for Photometer Calibration
BS 2497-7:1988 Standard reference zero for the calibration of pure tone air conduction audiometers-Specification for a standard reference zero at frequencies intermediate between those given in Parts 5 and 6 of BS 2497
BS ISO 4037-4:2019 Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy-Calibration of area and personal dosemeters in low energy X reference radiation fi...
BS 5579:1978 Specification for standard reference conditions for measurement of petroleum liquids and gases
NS-EN ISO 389:1995 Acoustics — Standard reference zero for the calibration of pure-tone air conduction audiometers (ISO 389:1991)
DANSK DS/INF 222-1:2019 Guide for reference til standarder i offentlige udbud i Europa
DANSK DS/EN ISO 4037-4:2021 Radiological protection – X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy – Part 4: Calibration of area and personal dosemeters in low energy X reference r...
DIN ISO 4037-4:2019 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference r...

ETSI - European Telecommunications Standards Institute

TR 102 847-2010 User Group; Quality of ICT Services; Standardization and regulation references in the Metering and Billing area (V1.1.1)

British Standards Institution (BSI)

BS 1647-2:1984 pH measurement - Specification for reference value standard solutions and operational reference standard solutions
BS ISO/CIE 17166:2019 Erythema reference action spectrum and standard erythema dose
BS ISO 17166:2000 Erythema reference action spectrum and standard erythema dose
BS ISO 4037-4:2004 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters in low energy X reference radiation fields
BS EN ISO 13443:2005(2006) Natural gas — Standard reference conditions
PD ISO/TR 16476:2016 Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials
BS ISO 8778:2003 Pneumatic fluid power - Standard reference atmosphere
BS EN ISO 4037-4:2021 Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters in low energy X reference…

The American Road & Transportation Builders Association

AASHTO R 33-2003(R2008) Standard Recommended Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer
AASHTO R 33-2020 Standard Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for a Falling Weight Deflectometer

AASHTO - American Association of State Highway and Transportation Officials

R 33-2011 Standard Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for a Falling Weight Deflectometer
PP8-1994 Standard Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer (2000 Edition)

International Telecommunication Union (ITU)

ITU-R P.835-5-2012 Reference standard atmospheres
ITU-R P.835-2012 Reference Standard Atmospheres
ITU-R PN.835-1-1994 Reference Standard Atmosphere for Gaseous Attenuation

Society of Automotive Engineers (SAE)

SAE J228-1995 Airflow Reference Standards
SAE J1746-1999 ISP-Vehicle Location Referencing Standard

US-DOC

DOC 15 CFR PT 230-2009 STANDARD REFERENCE MATERIALS
DOC 15 CFR PT 230-2007 STANDARD REFERENCE MATERIALS
DOC 15 CFR PT 230-2010 STANDARD REFERENCE MATERIALS

YU-JUS

JUS M.A0.001-1978 Standard reference temperature for industrial length measurements

SAE - SAE International

SAE J228-1990 Airflow Reference Standards
SAE J1746-2019 ISP-Vehicle Location Referencing Standard

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 310-1969 STANDARD FOR REFERENCE- STANDARD ELECTRICAL RESISTORS
IEEE 1666-2011 Standard SystemC Language Reference Manual (IEEE Computer Society)
IEEE P1076/D11-2019 Draft standard VHDL Language Reference Manual (IEEE Computer Society)
IEEE 1076-2002 Standard VHDL Language Reference Manual (IEEE Computer Society Document)
IEEE 1666-2005 IEEE Standard SystemC Language Reference Manual

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R P.835-4 FRENCH-2005 Atmosphère de référence pour l'affaiblissement d? aux gaz
ITU-R P.835-2-1997 Reference Standard Atmospheres
ITU-R P.835-3-1999 Reference Standard Atmospheres
ITU-R P.835-6-2017 Reference standard atmospheres
ITU-R PN.835-1992 Reference Standard Atmosphere for Gaseous Attenuation

SE-SIS

SIS SS-ISO 1:1979 Standard reference temperature for industrial length measurements
SIS SS-ISO 4037/ADD 2:1990 X and v reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Addendum 2: Photon reference radiations at energies between 4 MeV and 9 MeV
SIS SS-ISO 91-2:1992 Petroleum measurement tables — Part 2: Tables based on a reference temperature of 20 °C

Danish Standards Foundation

DS/ISO 389:1992 Acoustics. Standard reference zero for the calibration of pure-tone air conduction audiometers
DS/EN 13798:2010 Hydrometry - Specification for a reference raingauge pit
DS/EN ISO 13443:2006 Natural gas - Standard reference conditions
DS/ISO 7566:1991 Acoustics. Standard reference zero for the calibration of pure-tone bone conduction audiometers

Association Francaise de Normalisation

NF X91-001:2000 Erythema reference action spectrum and standard erythema dose.
NF X10-524*NF ISO 3567:2013 Vacuum gauges - Calibration by direct comparison with a reference gauge
NF E11-015:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment : standard reference measuring rods with spherical ends - Design and metrological requirements.
NF EN ISO 13443:2005 Natural gas - Standard reference conditions
NF X20-524:1997 Natural gas. Standard reference conditions.
NF X20-524*NF EN ISO 13443:2005 Natural gas - Standard reference conditions
NF M60-515:1984 Nuclear energy. Reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy.
NF EN 13798:2010 Hydrometry - Specification for a reference pit for installing a rain gauge
NF M60-512-4:2005 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4 : calibration of area and personal dosimeters in low energy X reference radiation fields.

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1934-2018 IEEE Standard for Adoption of OpenFog Reference Architecture for Fog Computing
ANSI/IEEE Std 310-1969 IEEE Standard for Reference-Standard Electrical Resistors
IEEE P1934/D1.0, February 2018 IEEE Draft Standard for Adoption of OpenFog Reference Architecture for Fog Computing
IEEE 1175-1992 Trial-use standard reference model for computing system tool interconnections
IEEE P1934/D2.0, April 2018 IEEE Approved Draft Standard for Adoption of OpenFog Reference Architecture for Fog Computing
IEEE Std 1175 IEEE Standard Reference Model for Computing System Tool Interconnections
IEEE Std 1076-2002 IEEE Standard VHDL Language Reference Manual
IEEE Std 1666-2011 IEEE Standard for Standard SystemC Language Reference Manual
IEEE Std 1076-2008 IEEE Standard VHDL Language Reference Manual
IEEE 1076-2019 IEEE Standard for VHDL Language Reference Manual
IEEE 1076-1987 IEEE Standard VHDL Language Reference Manual
ANSI/IEEE Std 1076-1993 IEEE Standard VHDL Language Reference Manual
IEEE Std 1076-1987 IEEE Standard VHDL Language Reference Manual
IEEE Std 1076-2000 IEEE Standard VHDL Language Reference Manual
IEEE Std 1076-2019 IEEE Standard for VHDL Language Reference Manual
IEEE 1666-2023 IEEE Standard for Standard SystemC® Language Reference Manual
IEEE Std 1076-2019 - Redline IEEE Standard for VHDL Language Reference Manual - Redline
IEEE P1666 IEEE Draft Standard for Standard SystemC Language Reference Manual
IEEE P1666/D3, May 2011 IEEE Draft Standard for Standard SystemC(R) Language Reference Manual
IEEE Std 1666-2023 IEEE Standard for Standard SystemC® Language Reference Manual
IEEE Std 1666-2005 IEEE Standard SystemC(R) Language Reference Manual
IEEE P1666/D1.2, November 2022 IEEE Approved Draft Standard for Standard SystemC Language Reference Manual
IEEE 1076-1987/INT-1991 IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual IEEE Computer Society Document

Korean Agency for Technology and Standards (KATS)

KS M 1058-2013 Arsine (Standard reference gas)
KS M 1014-1994 Oxygen(standard reference gas)
KS M 1059-2010(2020) Phosphine (Standard reference gas)
KS I ISO 13443:2019 Natural gas－Standard reference conditions
KS A ISO TR 16476:2018 Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
KS A ISO TR 16476-2023 References establish and express metrological traceability of quantities assigned to references
KS B ISO 8778:2003 Pneumatic fluid power-Standard reference atmosphere
KS M 1013-1994 Carbon monoxide(standard reference gas)
KS M 1055-2013 Reference material－Standard solution－Potassium
KS M 1012-1994 Carbon dioxide(standard reference gas)
KS A ISO 4037-4-2008(2018) X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy－Part 4：Calibration of area and personal dosemeters in l
KS M 1016-1993 Methane (standard reference gas) CH4 M.W=16.05
KS M ISO 5024-2003(2018) Petroleum liquids and liquefied petroleum gases - Measurement - Standard conditions
KS M 1046-2019 Reference materials — Standard solution — Ammonium ion
KS A ISO 4037-4-2023 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy－Part 4：Calibration of area and personal dosemeters in low energy X reference radiation fields

DIN

DIN EN 13798:2003 Hydrometry - Specification for a reference raingauge pit

European Telecommunications Standards Institute (ETSI)

ETSI TR 102 847-2010 User Group; Quality of ICT Services; Standardization and regulation references in the Metering and Billing area (V1.1.1)

German Institute for Standardization

DIN EN 13798:2010-11 Hydrometry - Specification for a reference raingauge pit; German version EN 13798:2010
DIN EN ISO 13443:2007-09 Natural gas - Standard reference conditions (ISO 13443:1996, including Corrigendum 1:1997); German version EN ISO 13443:2005
DIN 44013:1990-09 Objective reference equivalent meter; construction and application
DIN 1343:1990 Reference conditions, normal conditions, normal volume; concepts and values

American Society for Testing and Materials (ASTM)

ASTM E816-15(2023) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM E2005-10(2015) Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E2005-05e1 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E2005-21 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E1320-15 Standard Reference Radiographs for Titanium Castings
ASTM E2669-11 Standard Digital Reference Images for Titanium Castings
ASTM E1320-10(2014) Standard Reference Radiographs for Titanium Castings
ASTM E2669-16 Standard Digital Reference Images for Titanium Castings
ASTM E390-20 Standard Reference Radiographs for Steel Fusion Welds
ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E2669-10 Standard Digital Reference Images for Titanium Castings
ASTM E1320-20 Standard Reference Radiographs for Titanium Castings
ASTM E1136-10 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM E390-01 Standard Reference Radiographs for Steel Fusion Welds

BR-ABNT

ABNT PNB-66-1970 Brazilian Standard Bibliography

Aeronautical Radio Inc.

ARINC 705-5 ITEM 5.0 Attitude and Heading Reference Unit Design
ARINC 738A-1 ITEM 5.0-2001 Standard Signal Characteristics for the Internal Reference
ARINC 738A-1 ITEM 5.0 Standard Signal Characteristics for the Internal Reference

IN-BIS

IS 4755-1968 Reference zero for pure tone audiometer calibration

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0100017-2008 Video Calibration for Reduced Reference Objective Video Quality

AT-ON

ONORM A 2732-1988 Reference conditions, normal conditions,normal volume

Japanese Industrial Standards Committee (JISC)

JIS K 0041:1990 Phosphine (standard reference gas)
JIS K 0024:1997 Reference material -- Standard solution -- Chromium
JIS K 0036:1999 Reference material -- Standard solution -- Potassium
JIS K 0017:1997 Reference material -- Standard solution -- Bismuth
JIS K 0027:1997 Reference material -- Standard solution -- Manganese
JIS K 0040:1990 Arsine (standard reference gas)
JIS K 0026:1997 Reference material -- Standard solution -- Arsenic
JIS K 0025:1997 Reference material -- Standard solution -- Antimony
JIS K 0037:1999 Reference material -- Standard solution -- Magnesium
JIS K 0038:1999 Reference material -- Standard solution -- Calcium
JIS K 0035:1999 Reference material -- Standard solution -- Sodium
JIS Z 8900-1:2008 Standards particles -- Part 1: Reference particles for calibrating particle size measurements apparatus

GSO

GSO ISO 13443:2008 Natural Gas – Standard Reference Conditions
OS GSO ISO 13443:2008 Natural Gas – Standard Reference Conditions
GSO ISO 5024:2011 Petroleum liquids and liquefied petroleum gases – Measurement - Standard reference conditions
OS GSO ISO 5024:2011 Petroleum liquids and liquefied petroleum gases – Measurement - Standard reference conditions
BH GSO ISO 4037-4:2017 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

Underwriters Laboratories (UL)

UL 869A-1998 Reference standard for service equipment
UL 869A-2020 UL Standard for Safety Reference Standard for Service Equipment
UL 869A-2006 UL Standard for Safety Reference Standard for Service Equipment Fourth Edition
UL 869A BULLETIN-2005 UL Standard for Safety Reference Standard for Service Equipment
UL 869A BULLETIN-2002 UL Standard for Safety Reference Standard for Service Equipment
UL 869A BULLETINS-2008 UL Standard for Safety Reference Standard for Service Equipment
UL 1581-2023 Reference Standard for Electrical Wires, Cables, and Flexible Cords

Lithuanian Standards Office

LST EN 13798-2010 Hydrometry - Specification for a reference raingauge pit

AENOR

UNE-EN 13798:2011 Hydrometry - Specification for a reference raingauge pit

Standard Association of Australia （SAA）

AS ISO 13443:2007 Natural gas - Standard reference conditions
AS 5044.1:2010 AGLS Metadata Standard Reference Notes
AS 2649:2007 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
AS 4424:1996 Reference guide to Standards for semiconductor devices

KR-KS

KS I ISO 13443-2019 Natural gas－Standard reference conditions
KS A ISO TR 16476-2018 Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
KS A ISO 4037-4-2008(2023) X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy－Part 4：Calibration of area and personal dosemeters in l

BE-NBN

NBN-ISO 389:1992 Acoustics. Standard reference zero for the calibration of pure tone air conduction audiometers
NBN-ISO 8778:1991 Pneumatic fluid power - Standard reference atmosphere

American Society of Mechanical Engineers (ASME)

ASME PDS-1.1-2013 Dimensioning@ Tolerancing@ Surface Texture@ and Metrology Standards �� Rules for Drawings With Incomplete Reference to Applicable Drawing Standard

International Commission on Illumination (CIE)

CIE S 007/E-1998 Erythema Reference Action Spectrum and Standard Erythema Dose (ISO 17166: 1999)

CN-STDBOOK

图书 A-4397 JJF1033-2016 "Measurement Standard Assessment Specification" Implementation Guide

European Committee for Standardization (CEN)

EN ISO 4037-4:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 129-1978 Data - Std. Knob, Engineering Reference (Rev. 3)

AIAA - American Institute of Aeronautics and Astronautics

G-003A-1996 Guide to Reference and Standard Atmosphere Models
G-003B-2004 Guide to Reference and Standard Atmosphere Models
G-003-1990 Guide to Reference and Standard Atmosphere Models
G-003C-2010 Guide to Reference and Standard Atmosphere Models

API - American Petroleum Institute

API MPMS 2.2G-2014 Manual of Petroleum Measurement Standards Chapter 2.2G Calibration of Upright Cylindrical Tanks Using the Total Station Reference Line Method (FIRST EDITION)

American Institute of Aeronautics and Astronautics (AIAA)

AIAA G-003A-1996 Guide to Reference and Standard Atmosphere Models

IT-UNI

UNI ISO 3567:2020 Vacuum gauges - Calibration by direct comparison with a reference gauge

RU-GOST R

GOST ISO 5024-2013 Petroleum liquids and liquefied petroleum gases. Measurements. Standard reference conditions

ATIS - Alliance for Telecommunications Industry Solutions

0100017-2008 Reduced Reference Video Calibration Estimation Method (Pre-Pub)

(U.S.) Ford Automotive Standards

FORD APPENDIX A-2010 STANDARDS CONSOLIDATION REFERENCE LISTING (Version 28)

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0412-4037-4-2017 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radi