Metal flow inspection method

Metal flow inspection method, Total:158 items.

The international standard classification for "Metal flow inspection method" includes: Non-destructive testing , Fire-protection , Other methods of testing of metals , Metalliferous minerals , Welded joints .

The Chinese standard classification for "Metal flow inspection method" includes: Dedicated processing equipment , Electrical machine production equipment , Basic standards and general methods , Fire protection technology , Metallographic testing method , Basic standard and general method , Welding and cutting , Light metals and their alloys , Length Measurement .

Professional Standard - Agriculture

825兽药典一部-2015 Appendix Contents 0800 Limit Inspection Method 0821 Heavy Metal Inspection Method
1783药典一部-2010 Appendix IX E Heavy Metal Inspection Method
287药典第一增补本-2010 A Revised Appendices Appendix IX E Heavy Metal Inspection Method
101药典四部-2020 0800 Limit inspection method 0821 Heavy metal inspection method
2339药典二部-2010 Appendix Ⅷ H heavy metal inspection method
800兽药典二部-2015 Appendix Contents 0800 Limit Inspection Method 0821 Heavy Metal Inspection Method
653药典第一增补本-2010 Part Two Revised Appendix Appendix VIII H Heavy Metal Inspection Method
120药典四部-2015 0800 Limit inspection method 0821 Heavy metal inspection method

Taiwan Provincial Standard of the People's Republic of China

CNS 11400-1985 Method of Eddy Current Test for Metal Bars Rods and Wires

Professional Standard - Electron

SJ/T 31330-1994 Requirements of Readiness and Methods of Inspection and Assessment for B512/ZF 24N and J8016 16N High-speed Wire Braiding Machines
SJ/T 31392-1994 Requirements of readiness and methods of inspection and assessment for rectifying devices
SJ/T 31346-1994 Requirements of Readiness and Methods of Inspection and Assessment for Household Air-conditioner Motor Production and Assembly Lines
SJ/T 31247-1994 Requirements of Readiness and Methods of Inspection and Assessment for Aluminum Metallization Machines

Military Standard of the People's Republic of China-General Armament Department

GJB 8671.2-2015 Test methods for metallic cartridges Part 2: Appearance inspection
GJB 1580A-2004 Ultrasonic inspection method of deformed metal

Professional Standard - Ferrous Metallurgy

YB/T 127-1997 Ferrous metals - Testing methods for electromagnetic(eddy-current)sorting
YB/T 127-2014 Ferrous metals-testing methods for electromagnetic (eddy-current) sorting

Professional Standard - Aerospace

QJ 1421.4-1988 Safety inspection rules Metal thermal processing and surface treatment safety inspection rules
QJ 1421.3-1988 Safety inspection rules Metal cold processing safety inspection rules

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35393-2017 Non-destructive testing—Practice for electromagnetic(eddy-current) sorting of nonferrous metals
GB/T 35385-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of ferrous metals

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13298-2015(英文版) Inspection methods of microstructure for metals
GB/T 26642-2011 Non-destructive testing - Test method for computed radiography of metallic materials
GB/T 27905.3-2011 Inspection methods for trace and physical evidences from fire scene—Part 3:Ferrous metalwork
GB/T 13298-2015 Inspection methods of microstructure for metals
GB/T 13298-1991 Metal - Inspection Method of Microstructure

Group Standards of the People's Republic of China

T/CSCP 0081-2024 General Guidelines for Investigation Methods of Corrosion of Metallic Cultural Relics
T/GDAQI 148-2024 Rapid quality screening method for cord extension sets

Professional Standard-Safe Production

AQ 2068-2019 Management specification of routine inspection and regular testing—inspecting for metal and nonmetal mines hoisting system

Professional Standard - Machinery

JB/T 56236-1999 3.6~40.5kV AC metal-enclosed switchgear product quality inspection guidelines

工业和信息化部

JB/T 13471-2018 Non-destructive testing-Test method for electromagnetic monitoring of metal wear debris in oil

其他未分类

BJY 201922 Supplementary testing method for auramine O test items in Lupao Powder
BJY 201908 Supplementary testing method for abietic acid test items in Nüjin Pills

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld

海关总署

SN/T 1038-2020 Method for the inspection of sodium metal for import and export

Professional Standard - Commodity Inspection

SN/T 1038-2002 Method for the determination of sodium metal for import and export
SN/T 3442-2012 Detection and identification of Witchweed(Striga Lour.)

National Metrological Verification Regulations of the People's Republic of China

JJG 81-1981 Verification Regulation of Cormmon Normal Tester

Beijing Provincial Standard of the People's Republic of China

DB11/T 452-2007 Technical requirements for inspection well covers of non-metallic materials

British Standards Institution (BSI)

BS 7731:1994 Method for radiographic examination of cast metallic surgical implants
BS 7730:1994 Method for liquid penetrant inspection of metallic surgical implants
BS EN 444:1994(1999) Non - destructive testing — General principles for radiographic examination of metallic materials by X - and gamma - rays
BS EN 3718:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes
BS EN ISO 8401:1988 Metallic coatings - Review of methods of measurement of ductility
BS 6041:1981 Method of sampling of electrodeposited metallic coatings and related finishes: procedures for inspection by attributes
BS EN 13480-5:2017+A2:2021 Metallic industrial piping. Inspection and testing
BS EN 13480-5:2017 Metallic industrial piping. Inspection and testing
BS EN 13480-5:2012+A1:2013 Metallic industrial piping. Inspection and testing

RO-ASRO

STAS 6679/17-1985 Metal cutting machine-tools FRONT RUN-OUT CHECKING METHODS
STAS 1203-1987 METALLIC NAPHTIIENATES AND OCTOATES Checking up methods
STAS 7814-1989 DIRECT -CURRENT .MACHINES Cheeking up methods
STAS 12030/9-1986 GENERAL USE MACHINE-TOOLS FOR METALS CUTTING TEST PIECES FOR ACCURACY CHECKING UP Checking metnods of front knocking
STAS 12030/4-1986 Metal cutting machine tools TEST PIECES Checking methods for roundness
STAS 12030/10-1986 Metal cutting machine tools Test pieces CHECKING METHOD FOR CYLINDRICITY
STAS 12789-1989 Eddy currents fault detection PIPES INSPECTION OF NON- FERROMAGNETIC METALLIC MATERIALS General technical requirements
STAS 12559-1987 MAGNETIC POWDERS AND FLOW DETECTION INKS Methods for quality checking up
STAS 6606/1-1986 RADIOLOGICAL FLAW DETECTION Radiographic examination of metallic materials. Genera] technical requirements
STAS 12030/5-1986 Metal cutting machine tools TEST PIECES Checking methods for paralielism of two plat surfaces
STAS SR ISO 8401:1994 Metallic coatings. Review of methods of measurement of ductility
STAS 12030/6-1986 Metal cutting machine tools TEST PIECES Checking methods for squareness of two flat surfaces

American Society for Testing and Materials (ASTM)

ASTM F629-02(2007)e1 Standard Practice for Radiography of Cast Metallic Surgical Implants
ASTM E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E1030-05 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E1030-00 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM D3276-15e1 Standard Guide for Painting Inspectors (Metal Substrates)

VN-TCVN

TCVN 5223-1990 Metal cutting machines.Methods of intersection inspection of two axes
TCVN 5220-1990 Metal cutting machines.Methods of parallelism inspection of the axis to plane
TCVN 5218-1990 Metal cutting machines.Methods of perpendicularity inspection of the directions of two displacements

RU-GOST R

GOST 27333-1987 Nondestructive testing. Measurement of electrical conductivity of nonferrous metals by eddy current method
GOST 12177-1979 Cables, wires and cords. Methods of construction checking
GOST 12182.5-1980 Cables, wires and cords. Methods of checking for elongation resistance

SE-SIS

SIS SS 11 01 03-1980 Inspection of metallic goods
SIS 11 01 03-1972 Inspection of metallic goods
SIS SS 11 01 03-1985 Inspection of metal products for material characteristics

Standard Association of Australia （SAA）

AS 2084:1977 Methods for eddy current testing of metal bar and tubular products
AS 2205.5.1:1997 Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
AS 2205.5.1:1980 Methods of destructive testing of welds in metal - Metallographic tests, Method 5.1: Macro test - Cross-section examination
AS 2205.5.1:1988 Methods of destructive testing of welds in metal - Metallographic tests, Method 5.1: Macro test - Cross-section examination
ISO 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
AS 3978:2003 Non-destructive testing - Visual inspection of metal products and components
AS 3978:1991 Non-destructive testing - Visual inspection of metal products and components

European Committee for Standardization (CEN)

EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
prEN 444-1992 Non-destructive testing; general principles for radiographic examination of metallic materials by X- and gamma-rays

German Institute for Standardization

DIN 50602:1985 Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions
DIN EN ISO 8401:2017-05 Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017); German version EN ISO 8401:2017

SCC

BS 3889-2B:1966 Methods for non-destructive testing of pipes and tubes-Eddy current testing of non-ferrous tubes
CAN/CGSB-8.2-M88-1988 Wire mesh check sieves, metric
CAN/CGSB-8.1-1988 Wire mesh check sieves, non-metric
MIL MIL-L-9909A-1985 LIGHT, ULTRAVIOLET, METAL EXAMINING (NO S/S DOCUMENT) (SUPERSEDING MIL-L-9909)
SAE AMSSTD2154B-2017 Inspection, Ultrasonic, Wrought Metals, Process For
SAE AMSSTD2154E-2021 Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMSSTD2154A-2012 Inspection, Ultrasonic, Wrought Metals, Process For
JIS Z 4716:2018 Measurement methods of leakage X-ray from X-ray examination rooms
DANSK DS/EN 62058-11:2010 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods
CEI EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods
ASD-STAN prEN 2002-020:1970 Test methods for metallic materials - Part 20: Eddy current testing of circular cross-section tubes
DANSK DS/ISO 9584:2014 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
ASD-STAN prEN 2002-021:1970 Metallic materials - Test methods - Part 21 : Radiographic testing of castings

BE-NBN

NBN EN ISO 4524-6:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
NBN-EN 444-1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays

FI-SFS

SFS 2188-1977 Copper metal, casting alloy. General inspection

Korean Agency for Technology and Standards (KATS)

KS R 1039-1980 Inspection of DC generators for automobiles
KS R 1039-2005 Inspection of DC generators for automobiles
KS B 4302-1987 Test code for performance and accuracy of wire electrical discharge machines
KS B 4302-2002(2007) Test code for performance and accuracy of wire electrical discharge machines
KS P ISO 9584-2019 Implants for surgery－Non-destructive testing－Radiographic examination of cast metallic surgical implants
KS D 0002-1975(2016) General rules for inspection of non-ferrous metal materials

Association Francaise de Normalisation

NF EN 13068-3:2002 Non-destructive testing - Fluoroscopy inspection - Part 3: general principles of fluoroscopy inspection using X and gamma rays of metallic materials
NF A09-201:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays.
NF L10-012*NF EN 3718:2013 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
NF A91-095-3:1995 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.
NF A91-146:1997 Metallic coatings. Review of porosity tests.
NF A91-107:1995 Metallic coatings. Review of methods of measurement of ductility.

CH-SNV

SNV 24545-1938 Metal welding. Inspection and monitoring of welding machines. Part 1: Common ways to check
VSM 18640.6-1966 Metal welding. Inspection and monitoring of electric welding machines. Part 2: Special way inspection
VSM 18727.1-1965 Metal material inspection. Hardness inspection of cross-grinding welded joints

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2205.5.1:2019 Methods for destructive testing of welds in metal, Method 5.1: Macroscopic and microscopic examination of welds

HU-MSZT

MSZ 15432-1970 Metal powder detection method
MSZ 15435-1971 Metal powder detection method
MSZ 8880/7-1977 Power equipment testing tools and testing methods. Current stability check
MSZ KGST 1253-1978 Final inspection of powder metallurgy hard metal wire
MSZ KGST 1252-1978 Final inspection of powder metallurgy hard metal wire
MI 4300/5-1981 Metal welding concept check safety gas welding
MSZ 18097/2-1984 Detection of metals, alloys, metallic and non-metallic organic coatings. Anticorrosive testing in salt spray (ASS method)

Society of Automotive Engineers (SAE)

SAE AMS-STD-2154E-2021 Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMS-STD-2154D-2020 Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMS-STD-2154-2017 Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMS2634B-1996 Ultrasonic Inspection Thin Wall Metal Tubing
SAE AMS-STD-2154-2010 Inspection, Ultrasonic, Wrought Metals, Process For
SAE AMS-STD-2154C-2017 Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMS-STD-2154A-2012 Inspection, Ultrasonic, Wrought Metals, Process for

Danish Standards Foundation

DS/EN 10204:1993 Metallic products. Types of inspection documents

GSO

GSO OIML R42:2005 METAL STAMPS FOR VERIFICATION OFFICERS
BH GSO ISO 9584:2017 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants
OS GSO ISO 9584:2016 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants
GSO ISO 9584:2016 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 824-1964 Inspection, Ultrasonic, Wrought Metal (Rev. 1)
AIA/NAS NAS824-2011 INSPECTION, ULTRASONIC, WROUGHT METAL (Rev 2)

American Society of Mechanical Engineers (ASME)

ASME SEC V B SE-1030-2003 Standard Test Method for Radiographic Examination of Metallic Castings ASTM E 1030-00

European Association of Aerospace Industries

AECMA PREN 2003-8-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Inspection of Billets, Bars, Plates and Forgings Part 8 : Acceptance Criteria Edition P1

International Organization for Standardization (ISO)

ISO 8401:2017 Metallic coatings - Review of methods of measurement of ductility
ISO/DIS 9584.2 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
ISO 9584:2011 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
ISO/FDIS 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants

Spanish Association for Standardization (UNE)

UNE 7-469-1988 Metal materials, metal wire folding AC test

Japanese Industrial Standards Committee (JISC)

JIS B 8301:1990 Testing methods for centrifugal pumps, mixed flow pumps and axial flow pumps
JIS T 6004:2012 Dental metallic materials -- Test methods
JIS T 0304:2002 Testing method for metal release from metallic biomaterials
JIS H 0321:1973 General rules for inspection of non-ferrous metal materials

PL-PKN

PN M68006-1965 Hammer impac? energy checking by lead jumping-up method
PN E04481-1972 Metallic resistance electroheating materials Method of examination of life

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2002-16-1989 Aerospace Series Test Methods for Metallic Materials Part 16: Method for Penetrant Flow Detection

IN-BIS

IS 1755-1983 Metal wire winding test method

US-Unspecified Preparing Activity

DI-SAFT-81935-2013 INSPECTION METHOD SHEET

CZ-CSN

CSN 20 0300 Cast.2-1983 Metalworklng Machines. The measurlng of geometriqal accuracy of Machine tools. Methods of checklng accurgcy. General requirements

Aerospace Industries Association

AIA NAS 824-1964 Inspection, Ultrasonic, Wrought Metal (Rev. 1)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS824-2011 INSPECTION@ ULTRASONIC@ WROUGHT METAL (Rev 2)

Others: Aerospace series. Methods of test for metallic materials. Ultrasonic examination of bars, plates, blanks and forgings. Acceptance,Metal flow line detection method,Metal flow line detection method,Metal flow inspection method,Metal flow inspection method,ways to check metal