About parallelism

About parallelism, Total:112 items.

The international standard classification for "About parallelism" includes: Other standards related to optics and optical measurements .

The Chinese standard classification for "About parallelism" includes: Special chemical instrument and meter , Optoelectronic device assembly .

---

未注明发布机构

• DIN 339:1978 Parallel shank twist drills for use in jig bushes
• DIN 339:1969 Parallel shank twist drills for use in jig bushes
• DIN 1809 E:2019-11 Driving tenons for tools with parallel shank
• DIN 52367 E:2016-08 Wood-based panels - Determination of shear strength parallel to the surface
• DIN 339:1923 Parallel shank twist drills for use in jig bushes

Professional Standard - Machinery

• JB/T 7399-1994 Collimator
• JB/T 7402-1994 Optical parallel

Group Standards of the People's Republic of China

• T/CCSA 344-2022 Architecture of cloud computing platform based on container in insurance industry
• T/IAC 42-2022 Architecture of cloud computing platform based on container for insurance industry

Professional Standard - Chemical Industry

• HG/T 2151-2011 Technical specifications for rubber parallel-plate plastometers

国家市场监督管理总局、中国国家标准化管理委员会

• GB/T 38256-2019 Test method for optical axis parallelism of multiple optical paths

Professional Standard - Military and Civilian Products

• WJ 2636-2004 Method for adjusting the parallelism of each axis of self-propelled anti-aircraft gun weapon system

Taiwan Provincial Standard of the People's Republic of China

• CNS 13932-1997 Transmission aspects of unbalance about earth (definition and methods)

IX-EU/EC

• EEC/4057/86-1986 Council Regulation on Unfair Pricing Practices in Maritime Transport
• NO 730/2006-2006 COMMISSION REGULATION on airspace classification and access of flights operated under visual flight rules above flight level 195 (Text with EEA relevance)
• COM(2003) 258 FINAL-2003 REPORT FROM THE COMMISSION TO THE COUNCIL Called for by the Joint Action on New Synthetic Drugs (97/396/JAI) concerning TMA-2 Called for by the Joint Action on New Synthetic Drugs (97/396/JAI) concerning 2C-I Called for by the Joint Action on New Syntheti
• M 323-2002 STANDARDISATION MANDATE GIVEN TO THE EUROPEAN COMMITTEE FOR STANDARDISATION (CEN) UNDER EC DIRECTIVE 98/37/EC RELATING TO MACHINERY WITH A VIEW TO REVISION OF STANDARD EN 1495:1997 "LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS"
• COM(2003) 178 FINAL-2003 REPORT FROM THE COMMISSION ON THE FEASIBILITY OF A POSITIVE LIST OF FEED MATERIALS

Association Francaise de Normalisation

• NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
• NF E66-200-2:1993 PARALLEL SHANKS FOR MILLING CUTTERS. PART 2 : DIMENSIONAL CHARACTERISTICS OF FLATTED PARALLEL SHANKS.
• NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
• FD E23-008-3*FD ISO/TR 10064-3:2001 Cylindrical gears - Code of inspection practice - Part 3 : recommendations relative to gear blanks, shaft centre distance and parallelism of axes
• NF E66-250*NF ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
• NF G38-140:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load.
• FD CEN/TR 16417:2016 Footwear - Guidelines for the footwear industry on substances of very high concern (Annex XIV of REACH)

IMO - International Maritime Organization

• I538M-2009 London Convention and Protocol Guidance for the development of action lists and action levels for dredged material

International Maritime Organization (IMO)

• IMO I538M-2009 London Convention and Protocol Guidance for the development of action lists and action levels for dredged material

RU-GOST R

• GOST 25334-1982 Parallel flatted shanks for milling cutters. Basic dimensions
• GOST 1121-1975 Flat-parallel glass. Sets
• GOST 21395.3-1975 Variable resistors. Test methods of easy running of motion smoothness, torque moment (stress of motion), starting (stress) torque movable system of resistor, operation of moment (stress) of resistor switch
• GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions

RO-ASRO

• STAS 336/2-1988 WOO D Elastic modulus determination at tensile stress parallcl to grains

Korean Agency for Technology and Standards (KATS)

• KS V 3028-2006 Self closing parallel cock heads for short sounding pipe
• KS B ISO 4348-2005(2010) Flat-top chains and associated chain wheels for conveyors
• KS B 3274-2013 CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
• KS B 3273-1997 DIMENSIONAL CHARACTERISTICS OF PARALLEL SHANKS FOR MILLING CUTTERS
• KS B ISO 2338-2021 Parallel pins
• KS B ISO 3294-2013 Parallel shank countersinks for angles 60°, 90° and 120° inclusive
• KS W 0617-1984(2009) AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS
• KS B ISO 9386-1-2017(2022) Power-operated vertical lifting platforms for persons with impaired mobility
• KS B 5242-2022 Optical parallels

VE-FONDONORMA

• COVENIN 1081-1976 Test methods for non-parallel wool fiber length in Venezuelan national standards

Canadian General Standards Board （CGSB)

• CGSB 39-GP-28B-1975 Levels and Plumbs, and Levels, Standard for

SCC

• AWWA ACE90042 AWWA's Commitment to Affirmative Action a Future of Involvement
• VDI 4006 BLATT 3-2013 Human reliability — methods for event analysis
• NS 3276:1987 Particle boards - Test methods - Shear strength parallel to the plane of the board
• NS 5320:1977 Hand taps for pipe threads for parallel threads
• NS 3280:1987 Particle boards - Test methods - Compression strength parallel to the plane of the board
• DIN 10 E:2008 Draft Document - Squares of parallel shanks for rotating tools
• CEI CLC/TR 50619:2015 Guidance on how to conduct Round Robin Tests
• AS C43:1957 Carbon brushes (parallel sided) for use on commutator and slip ring machines
• UNE 15318:1990 GENERAL PURPOSE PARALLEL LATHES. TESTING OF THE ACCURACY.
• DANSK DS/CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
• BS 4259:1968 Recommendations on cleaning in the fish industry
• CIE 201:2011 Recommendations on Minimum Levels of Solar UV Exposure
• NS 5101:1969 Parallel pins
• MIL MIL-PRF-8805/8H-2012 Switches, Sensitive, SPDT, Leaf Actuator, Low Level To 4 Amperes, Hermetic Seal
• CAN 3-B354.3-M82-1982 Self-propelled elevating work platforms for use on uncompacted surfaces
• DIN CLC/TR 50619 E:2014 Draft Document - Guidance on how to conduct Round Robin Tests; German version CLC/FprTR 50619:2013
• BS PD 6602:1996 Recommendations on necessary concepts to model behavioural semantics

CZ-CSN

• CSN 49 0118-1979 Wood. Shear strength parallel to the grain
• CSN 22 1127-1983 High capacity parallel shank twist drills. Medium series. Basic dimensions

German Institute for Standardization

• DIN 1809:2021-01 Driving tenons for tools with parallel shank
• DIN 339:2006-11 Parallel shank twist drills for use in jig bushes
• DIN 6883:1956-02 Taper Key Torque Transmission; Parallel Keys, Dimensions and Application
• DIN 8038:2020-04 Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics)
• DIN EN 16361:2016-12 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation; German version EN 16361:2013+A1:2016 / Note: To be replaced by DIN E...
• DIN 52367:2017-05 Wood-based panels - Determination of shear strength parallel to the surface
• DIN 6884:1956-02 Taper Key Torque Transmission; Gib-head Parallel Keys, Dimensions and Application

US-FCR

• FCR COE ER 1165-2-26-1984 IMPLEMENTATION OF EXECUTIVE ORDER 11988 ON FLOOD PLAIN MANAGEMENT

Danish Standards Foundation

• DS 98:1968 Parallel keys. Holes for hold down and lifting screws

Natural Gas Processor's Association (NGPA)

• GPA RR-44-1980 Vapor-Liquid and Liquid-Liquid Equilibria in the Methane-Toluene System and Relation of Liquid-Liquid Equilibrium Behavior at Low Temperatures to Vapor-Liquid Equilibria Behavior at High Temperatures and Elevated Pressures
• GPA RR-118-1990 GPSWAT GPA Sour Water Equilibria Correlation and Computer Program

PL-PKN

• PN M55015-1987 Seatings for fixing flatted parallel shank tools
• PN M85002-1991 Thin parallel keys
• PN M55551-18-1986 Metal cutting machin? tools ethod of measurement of straightness nd parallelism between two planes

IN-BIS

• IS 6172-1979 Specification for hand taps for pipe threads parallel
• IS 5444-1978 Specification for parallel hand reamers with parallel shanks

European Committee for Electrotechnical Standardization（CENELEC）

• CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
• CLC/TR 50619-2014 Guidance on how to conduct Round Robin Tests

British Standards Institution (BSI)

• PD CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
• BS EN 16361:2013+A1:2016 Power operated pedestrian doors. Product standard, performance characteristics. Pedestrian doorsets, other than swing type, initially designed for installation with power operation
• BS PD ISO/IEC TS 19570:2015 Programming Languages. Technical Specification for C++ Extensions for Parallelism

Defense Logistics Agency

• DLA A-A-55422 A VALID NOTICE 1-2012 Adapter, Switch Actuator (for Miniature Basic Sensitive Switches)

Society of Automotive Engineers (SAE)

• SAE AS6572-2-1958 AS6572 Switch Assy: for Pilot's Control Wheel
• SAE AIR1209-2004 Construction and Calibration of Parallel Plate Transmission Line for Electromagnetic Interference Susceptibility Testing

American Society for Testing and Materials (ASTM)

• ASTM D926-08 Standard Test Method for Rubber Property8212;Plasticity and Recovery (Parallel Plate Method)
• ASTM D926-08(2013) Standard Test Method for Rubber Propertymdash;Plasticity and Recovery 40;Parallel Plate Method41;

GSO

• GSO ISO 3940:2015 Tapered die-sinking cutters with parallel shanks
• GSO ISO 3347:2015 Wood -- Determination of ultimate shearing stress parallel to grain
• BH GSO ISO 3347:2016 Wood -- Determination of ultimate shearing stress parallel to grain

International Organization for Standardization (ISO)

• ISO 17832:2018 Non-parallel steel wire and cords for tyre reinforcement
• ISO/IEC TS 19570:2015 Programming Languages - Technical Specification for C++ Extensions for Parallelism

NO-SN

• NS 5320-1977 Hand taps for pipe threads for parallel threads
• NS 5341-1977 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

SAE - SAE International

• SAE AIR1209-1974 Construction and Calibration of Parallel Plate Transmission Line for Electromagnetic Interference Susceptibility Testing

KR-KS

• KS B ISO 2338-2016 Parallel pins
• KS K ISO 11058-2017 Geotextiles and geotextile-related products－Determination of water permeability characteristics normal to the plane, without load

Japanese Industrial Standards Committee (JISC)

• JIS B 1354:1988 Parallel pins
• JIS B 1354:2012 Parallel pins

TR-TSE

• TS 3459-1980 WOOD — DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN

SE-SIS

• SIS SMS 16-1965 Parallel pins
• SIS SMS 2331-1965 Parallel dowel pins

Institute of Electrical and Electronics Engineers (IEEE)

• IEEE/ANSI C63.12-2015 American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels

CU-NC

• NC 43-13-1968 Particle boards and fibre boards Tensile strength parallel to the surface

YU-JUS

• JUS D.A1.048-1979 Testing ofwood. Determination ofultimate tensile stress parallel to grain
• JUS M.C2.061-1991 Thin parallel keys

BE-NBN

• NBN E 27-708-1974 Parallel thin keys

IT-UNI

• UNI 5669-1965 Parallel needle files.

ES-UNE

• UNE-CEN/TR 16417:2016 Footwear - Footwear industry guideline for substances of very high concern (Annex XIV of REACH) (Endorsed by AENOR in April of 2016.)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

• IEEE 314-1971 STANDARDS REPORT ON STATE OF THE ART OF MEASURING UNBALANCED TRANSMISSION- LINE IMPEDANCE

American Gear Manufacturers Association

• AGMA 915-3A-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism

Others: parallelism,Parallelism,Regarding the application of recommended standards,On the Test Conditions and Statistical Test Principles of Reliability Test,About parallelism,Parallelism of two parallel samples,Domestic About Equipment Availability,About Laboratory Radioactive Reference Materials