Inspection of internal photos

Inspection of internal photos, Total:152 items.

The international standard classification for "Inspection of internal photos" includes: Medical Sciences and health care facilities in general , Protection against crime , Occupational safety. Industrial hygiene , Tractive stock , General standards related to shipbuilding and marine structures .

The Chinese standard classification for "Inspection of internal photos" includes: Marking, packaing, transport and storage , Movie, photo, micro and copier equipment in general , Length Measurement , General technical requirements , Diagnostic standard for occupational diseases , Diesel locomotives , Vessel technology .

Group Standards of the People's Republic of China

T/GDAQ 00010-2023 Specification for pathological examination of digestive tract endoscopic specimens
T/CMEA 41-2023 Intelligent cover for lighting inspection manhole

Professional Standard - Agriculture

854兽药典一部-2015 Appendix Contents 1100 Biological Test Method 1143 Bacterial Endotoxin Test Method
1818药典一部-2010 Appendix XIII D Bacterial Endotoxin Test Method
272药典三部-2020 Microbiological Test Method 1143 Bacterial Endotoxin Test Method
152药典四部-2015 1100 biological test method 1143 bacterial endotoxin test method
818兽药典二部-2015 Appendix Contents 1100 Biological Test Method 1113 Bacterial Endotoxin Test Method
140药典四部-2020 1100 biological test method 1143 bacterial endotoxin test method
2374药典二部-2010 Appendix Ⅺ E Bacterial endotoxin test method
249药典三部-2015 Microbiological examination method 1143 Bacterial endotoxin examination method general rule 95
277药典三部-2010 Appendix Ⅻ ⅫE Bacterial endotoxin test method

Professional Standard - Pharmaceutical Packaging

YBB 0006-2003 Pineiciji Jianchafa Tests for intracutaneous irritation
YBB 0006(03)-2003 Intradermal irritation test (Trial)

Professional Standard - Machinery

JB/T 5194-1991 Camera Inspection-sampling Procedure and Table for Inspection by Attributes (Applicable to Continuous Batch Inspection)

National Metrological Verification Regulations of the People's Republic of China

JJG 471-2003 Verification Regulation of Bearing Inside and Outside Diameter Testers

Military Standard of the People's Republic of China-General Armament Department

GJB 579-1988 Aviation tire holographic inspection method

Professional Standard - Aviation

HB 5521-1980 Test method for Inspection of Red Light Illumination in Aircraft Cabin (on trail)
HB 5886-1985 Inspection and Test for White-light Illumination in Aircraft Cabin

Taiwan Provincial Standard of the People's Republic of China

CNS 2696-1966 Testing Standard for Small Internal Combustion Engines of Land Use
CNS 973-1996 Method of Test for Canned Food-Inspection for Interior of Can

中华人民共和国国家卫生和计划生育委员会

GB 18196-2000 Specifications of the medical examinations for the overexposed individuals

Professional Standard - Nuclear Industry

EJ/T 20150.7-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 7: Visual Inspection of Fuel Rods
EJ/T 20150.16-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 16: Internal pressure measurement of fuel rods
EJ/T 20150.2-2018 Post-Irradiation Inspection of PWR Bundle Fuel Assemblies Part 2: Underwater Visual Inspection of Fuel Assemblies
EJ/T 20150.21-2018 Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 21: Fuel cladding tube internal pressure burst test

Professional Standard - Public Safety Standards

GA/T 1563-2019 Technical requirements for shoes-on metal detectors

Occupational Health Standard of the People's Republic of China

GBZ 215-2009 Medical examination and management principle for the overexposed individuals

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 3315-1982 Rules for the inspecting and testing of diesel locomotives after completion of construction
GB/T 3315-1982 Rules for inspecting and testing of diesel locomotives after completion of construction

Professional Standard - Energy

NB/T 20564-2019 Poolside inspection of irradiated fuel assembly in pressure water reactor nuclear power plant

Professional Standard - Railway

TB/T 2604.2-1996 Inner Width Inspection Sample of No.13 Hook Tail Frame Side Panel

Professional Standard-Ships

CB/T 3177-1994 Rules for Radiograph and Ultrasonic Inspection of Ship Steel Welds

Society of Automotive Engineers (SAE)

SAE J599-1981 LIGHTING INSPECTION CODE
SAE J599D-1974 LIGHTING INSPECTION CODE
SAE J599C-1973 LIGHTING INSPECTION CODE
SAE J1589-1992 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles

SAE - SAE International

SAE J599B-1970 LIGHTING INSPECTION CODE
SAE J599-2015 LIGHTING INSPECTION CODE
SAE J599-1974 Lighting Inspection Code@ Standard (May 1981)

CZ-CSN

CSN 01 3829-1987 Reprography. Micrographic checking producedures
CSN 01 4679-1966 Diameters of inspection plug gauges for internal involute gearing with straight teeth
CSN ISO 6621-2:1994 Internal combustion engines.Piston rings.Inspection measuring principles

Lithuanian Standards Office

LST EN 12681-2003 Founding - Radiographic examination

SCC

BS ISO 12307-2:2000 Plain bearings. Checking of wrapped bushes-Checking the inside diameter
NS-EN 12681:2003 Founding — Radiographic examination
CAN/CGSB-48.16-1992 Radiographic Inspection of Aircraft Structures
AENOR UNE-EN 12681:2003 Foundry. Radiographic examination.
BS 2600-1:1973 Radiographic examination of fusion welded butt joints in steel
NEMA LS 20008-2023 The Need for Life-Long Periodic Emergency Lighting Inspections
BS 3541:1962 Specification for lighting fittings for general examination purposes in hospitals
VDI 6022 BLATT 4-2012 Indoor air technology, indoor air quality — qualification of personnel for hygiene controls, hygiene inspections and the assessment of indoor air quality
AENOR UNE-EN 16407-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
NS-EN 16407-2:2014 Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 2: Double wall radiographic inspection
DANSK DS/EN 16407-1:2014 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 1: Tangential radiographic inspection
DANSK DS/EN 16407-2:2014 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 2: Double wall radiographic inspection
AENOR UNE-EN 16407-1:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
12/30258737 DC BS EN 16407-2. Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Tangential radiographic inspection
NS-EN 16407-1:2014 Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 1: Tangential radiographic inspection
DIN EN 16407-2 E:2012 Draft Document - Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2 : Double Wall radiographic inspection; German version prEN 16407-2:2012
DIN EN 16407-1 E:2012 Draft Document - Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection; German version prEN 16407-1:2012
DANSK DS/EN ISO 20769-2:2018 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays – Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
NS-EN ISO 20769-1:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
NS-EN ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
VDI/DGQ 3445 BLATT 4-1977 Statistical testing of the working accuracy of grinding machines; internal grinding machines
12/30258734 DC BS EN 16407-1. Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Part 1. Tangential radiographic inspection
DANSK DS/EN ISO 20769-1:2018 Non-destructive testing – Radiographic inspection of corrosion and deposits in pipes by X – and gamma rays – Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
DANSK DS/ISO 9584:2014 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
DIN EN ISO 20769-2 E:2017 Draft Document - Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO/DIS 20769-2:2017); German and English version prEN ISO 20769-2:2017
DIN EN ISO 20769-1 E:2017 Draft Document - Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO/DIS 20769-1:2017); German and English version prEN ISO 20769-1:2017

Spanish Association for Standardization (UNE)

UNE-EN 12681:2003 Founding - Radiographic examination
UNE-EN 12517:1998 NON-DESTRUCTIVE EXAMINATION OF WELDS. RADIOGRAPHIC EXAMINATION OF WELDED JOINTS. ACCEPTANCE LEVELS.
UNE-EN ISO 20769-2:2019 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
UNE-EN ISO 20769-1:2019 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)

Institute of Electrical and Electronics Engineers (IEEE)

Electrical Safety Manual for Power and Communications Industries [Adapted from the 2017 IEEE NESC(R) Electrical Safety Manual for Power and Communications Industries [Adapted from the 2017 IEEE NESC(R) Handbook Premier Edition] - Chinese Edition

International Commission on Illumination (CIE)

CIE 205-2013 REVIEW OF LIGHTING QUALITY MEASURES FOR INTERIOR LIGHTING WITH LED LIGHTING SYSTEMS

HU-MSZT

MSZ 7482/9.lap-1968 Inspection of adhesives made of artificial resin and inspection of discoloration reaction under ultraviolet irradiation
MSZ 6369/8-1971 One of the ways to check flour. Light test
MNOSZ 14725-1954 Medical equipment. internal medicine examination table
MSZ 5185-1971 Excavation equipment. Check the lining inspection of threaded pipes on the formwork
MSZ 6141-1979 Inward centralized inspection method for phosphate rock
MSZ 4310/4-1973 MSZ 4310/4-73 Corrosion inspection of welded fixtures, marking and naming of types of welding problems using optical photography
MSZ 11057-1977 MSZ 11057-77 Inspection methods for rubber inner tubes and rubber tubes
MSZ 7304/1-1982 Food sensory inspection, taste inspection

Korean Agency for Technology and Standards (KATS)

KS B ISO 12307-2-2016 Plain bearings－Checking of wrapped bushes－Part 2：Checking the inside diameter
KS B ISO 12307-2:2016 Plain bearings－Checking of wrapped bushes－Part 2：Checking the inside diameter
KS B ISO 12307-2:2002 Plain bearings-Checking of wrapped bushes-Part 2:Checking the inside diameter
KS P ISO 9584-2019 Implants for surgery－Non-destructive testing－Radiographic examination of cast metallic surgical implants
KS X ISO TR 12031-2013 Micrographics－Inspection of silver-gelatin microforms for evidence of deterioration

FI-SFS

SFS 3207-1979 Welding. Radiographic examination of welded joints
SFS 3207-1986 In case of interpretation disputes the Finnish fext applies

Association Francaise de Normalisation

NF S20-007:1969 PHOTOGRAPHY. TRANSPARENCIES AND COLOUR PHOTOGRAPHS. CONDITIONS FOR INDIVIDUAL AND COMPARATIVE EXAMINATION.
NF A05-150:1985 Steel products. Techniques of micrographic examination.
NF A95-342:1985 Powder metallurgy. Sintered materials including hardmetals. Micrographic examination techniques.
NF EN ISO 20769-2:2018 Non-destructive testing - Radiographic examination of corrosion and deposits in pipelines using X-rays and gamma rays - Part 2: double-wall radiographic examination
NF EN ISO 20769-1:2018 Non-destructive testing - Radiographic examination of corrosion and deposits in pipelines using X-rays and gamma rays - Part 1: tangential radiographic examination
NF ISO 6480:2019 Acceptance conditions for horizontal interior broaching machines - Checking accuracy
NF E03-163:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.
NF EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: radiographic inspection of the weld bead of welded steel tubes for the detection of imperfections
NF A04-150:1984 Radiographic examination of aluminium and magnesium alloy castings.

Japanese Industrial Standards Committee (JISC)

JIS T 1553:1984 Endoscopic apparatus for medical use
JIS E 4043:1990 General rules for the inspection of diesel railcar on completion of construction
JIS W 0903:1984 Radiographic inspection for aerospace quality materials
JIS E 4044:1990 General rules for the inspection of diesel locomotives on completion of construction

Indonesia Standards

SNI 16-6362-2000 Endoscopic equipment

Military Standards (MIL-STD)

DOD A-A-53201-1987 FORCEPS, ARTHROSCOPIC (STRAIGHT)
DOD A-A-53830-1989 FORCEPS, ARTHROSCOPIC, STRAIGHT, HOOK BASKET
DOD A-A-51647-1987 TRAY, ENDOSCOPIC INSTRUMENT STERILIZATION
DOD A-A-54344-1991 CURETTE, ENDOMETRIAL BIOPSY (STRAIGHT, PLASTIC)
DOD A-A-51648-1987 TRAY SET, ENDOSCOPIC INSTRUMENT STERILIZATION
DOD A-A-54620-1992 ARTHROSCOPIC SYSTEM, SURGICAL, 4 MM
DOD A-A-53449-1988 TRAY, STERILIZATION, ARTHROSCOPIC INSTRUMENT COMPONENTS

RO-ASRO

STAS 9677-1974 TUBURI DE CAUCIUC Verificarea diametrului interior ?i a grosimii peretelui

American Society for Testing and Materials (ASTM)

ASTM E433-71(1997) Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E433-71(2013) Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E1648-95(2011) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM E1648-95(2001) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM E1648-15 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

IT-UNI

UNI 6810-1972 Statistical methods for quality inspection. Check the correlation between levels (via frequency comparison)

National Association of Pipe Fabricators (NAPF)

PFI ES-16-2013 ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS

Standard Association of Australia （SAA）

AS 2293.2:1987 Emergency evacuation lighting in buildings - Inspection and maintenance
ISO 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants

Defense Logistics Agency

DLA MS28050 REV B-2005 VALVE, CHECK, LOW PRESSURE, INTERNAL THREADS
DLA AN6280 REV 2 VALID NOTICE 2-2005 VALVE, 3000 PSI HYDRAULIC CHECK INTERNAL PORTS

German Institute for Standardization

DIN EN ISO 20769-1:2018-12 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018); German version EN ISO 20769-1:2018
DIN EN ISO 20769-2:2018-12 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018); German version EN ISO 20769-2:2018
DIN 85004-9 E:2007-11 Pipelines of copper-nickel-alloys - Part 9: General principles for the radiographic examination
DIN 85004-9:2008-12 Pipelines of copper-nickel-alloys - Part 9: General principles for the radiographic examination; Text in German and English

European Committee for Standardization (CEN)

EN 16407-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

PL-PKN

PN BN 6129-01-1966 Pictures, photos and photographic paper. Photosensitive inspection method

British Standards Institution (BSI)

BS 7731:1994 Method for radiographic examination of cast metallic surgical implants
BS EN ISO 20769-2:2018 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Double wall radiographic inspection
BS EN ISO 20769-1:2018 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Tangential radiographic inspection
BS ISO 3547-6:2020 Plain bearings. Wrapped bushes - Checking the inside diameter

GOSTR

GOST R 58548-2019 Paper navigation charts of inland waterways. Editorial check
GOST R 58547-2019 Electronic navigation charts of inland waterways. Cameral check

RU-GOST R

GOST R ISO 12307-2-1999 Plain bearings. Wrapped bushes. Checking the inside diameter
GOST ISO 12307-2-1999 Plain bearings. Wrapped bushes. Checking the inside diameter
GOST 12.1.020-1979 Occupational safety standards system. Noise. Method of control for sea and river ships

VDI - Verein Deutscher Ingenieure

VDI 4300 Blatt 10-2006 Measurement of indoor air pollution - Measurement strategies for determination of mould fungi in indoor environment

International Organization for Standardization (ISO)

ISO/DIS 9584.2 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
ISO 9584:2011 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
ISO/FDIS 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
ISO/IEC GUIDE 56:1989 An approach to the review by a certification body of its own internal quality system

GSO

OS GSO ISO 9584:2016 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants
GSO ISO 9584:2016 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants
BH GSO ISO 9584:2017 Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants

AT-ON

ONORM S 2116-4-2001 Examinations of solidified wastes - Eluation tests during 24 hours, 64 days, 2 days

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3896:1998 Waters - Examination for legionellae including Legionella pneumophila

BE-NBN

NBN-ISO 3447:1992 Joints in building - General check-list of joint fonctions

KR-KS

KS B ISO 3547-6-2018(2023) Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter

VN-TCVN

TCVN 7507-2005 Non-destructive examination of welds.Visual examination

European Association of Aerospace Industries

AECMA PREN 4261-5-1995 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Test Method Standards Part 5 : Specific Requirements for Macrographic and Micrographic Examination Method Standard Edition P1

Others: Inspection of internal photos,Internal inspection