Holiday work status

Holiday work status, Total:51 items.

The international standard classification for "Holiday work status" includes: Cranes , Accessories for lifting equipment , Aircraft and space vehicles in general .

The Chinese standard classification for "Holiday work status" includes: Hoisting machinery , Reliability .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31051-2025 Cranes—Anchoring devices for in-service and out-of-service conditions
GB/T 31051.4-2016 Cranes一Anchoring devices for in一service and out-of-service conditions一 Part 4:Jib cranes
GB/T 31051.1-2014 Cranes―Anchoring devices for in-service and out-of-service conditions―Part 1:General

Group Standards of the People's Republic of China

T/QGCML 3088-2024 Technical regulations for adjusting the state of periodic pressure supports in the fully mechanized caving working face of extra-thick coal seams under the overlying goaf

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 108A-2008 Nonoperating reliability prediction handbook for electronic equipment
GJB/Z 108-1998 Electronic equipment non-operating reliability prediction manual
GJB/Z 108A-2006 Nonoperating reliability prediction handbook for electronic equipment

未注明发布机构

D 1338 - 99 (2021) Method for determining the working life of liquid or paste adhesives

Professional Standard - Electron

SJ 815-1974 Methods of measurement for pulse operating state of glow discharge counter tubes
SJ 814-1974 Methods of measurement for sine-wave operating state of glow discharge counter tubes

Professional Standard - Construction Industry

JG/T 5090-1997 Extraction method of fluid samples from lines of an operating system

Professional Standard - Aerospace

QJ 3250-2005 Guideline of non－operating reliability design and evaluation for space products

Shaanxi Provincial Standard of the People's Republic of China

DB6101/T 156-2020 Guidelines for Village Prevention and Control During the Novel Coronavirus Pneumonia Epidemic

Professional Standard - Public Safety Standards

GA/T 2000.147-2015 Information codes for public security industry—Part 147:Codes for working status of telephone terminal
GA /T 2000.147-2015 Public Security Information Code Part 147: Telephone Terminal Working Status Code

American Water Works Association (AWWA)

AWWA JAW6354 Journal AWWA — Operator Certification: 1980 Status Report

British Standards Institution (BSI)

BS ISO 17255:2014 Space systems. Programme management. Statement of work
BS ISO 18573:2012 Conveyor belts. Test atmospheres and conditioning period

International Organization for Standardization (ISO)

ISO 17255:2014 Space systems - Programme management - Statement of work
ISO 12210-1:1998 Cranes - Anchoring devices for in-service and out-of-service conditions - Part 1: General
ISO 18573:2012 Conveyor belts - Test atmospheres and conditioning periods
ISO 18573:2003 Conveyor belts - Test atmospheres and conditioning periods
ISO 12210-4:1998 Cranes - Anchoring devices for in-service and out-of-service conditions - Part 4: Jib cranes

Internet Engineering Task Force (IETF)

RFC 8490-2019 DNS Stateful Operations

Danish Standards Foundation

DS/ISO 6947:1984 Fundamental welding positions. Definitions and values of angles of slope and rotation straight welds for these positions

US Federal Contractor Registration (USFCR)

FCR COE ER 690-1-600-1985 LEAVE AND HOURS OF DUTY
FCR DOE 322.1-1996 PAY AND LEAVE ADMINISTRATION AND HOURS OF DUTY
FCR DOE 322.1A-1998 PAY AND LEAVE ADMINISTRATION AND HOURS OF DUTY

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0711-501 E*DIN EN IEC 63103:2020-02 Lighting equipment - Non-active mode power measurement
VDE 0409-2 E*DIN IEC 61003-2:2008-04 Industrial-process control systems – Instruments with analogue inputs and two- or multi -state outputs – Part 2: Guidance for inspection and routine testing

American National Standards Institute （ANSI)

ANSI/IEEE 1616:2004 Standard for Motor Vehicle Event Data Recorder (MVEDR)

Indonesia Standards

SNI 04-6256.1-2001 Pekerjaan dalam keadaan bertegangan - Pedoman untuk perencanaan jaminan mutu

Gosstandart of Russia

GOST 34018.1-2016 Cranes. Anchoring devices for in service and out of service conditions. Part 1. Basic principles
GOST 34018.4-2016 Cranes. Anchoring devices for in service and out of service conditions. Part 4. Jib cranes
GOST ISO 6394-2016 Earthmoving machines. Determination of the sound pressure level of radiation at the workplace. Tests in stationary mode
GOST 34018.1-2024 Cranes. Fastening devices for working and non-working conditions. Part 1. Basic principles
GOST 34018.5-2024 Cranes. Fastening devices for working and non-working conditions. Part 5. Overhead and gantry cranes

German Institute for Standardization

DIN 13027:1982-10 Orthopedics; arm prosthesis; fittings for artificial hands and working aids

Association Francaise de Normalisation

NF T47-120*NF ISO 18573:2013 Conveyor belts - Test atmospheres and conditioning periods

Standard Association of Australia （SAA）

HB 122.3.2.1-1998 The Workplace Manual - Model 3: Work/Life Elements - Element 3.2.1: Leave Options - Flexible Leave Options/Carers' Leave
AS E35 TD:1973 Working drawing for test dummy for seat belt assemblies

Japanese Industrial Standards Committee (JISC)

JIS B 8828-4:2007 Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 4: Jib cranes

International Telecommunication Union (ITU)

ITU-T SERIE G SUPP 31 SPANISH-1988 STATUS OF WORK OF PRESENTLY CONSIDERED DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) DOCUMENTS
ITU-T SERIE G SUPP 31 FRENCH-1988 STATUS OF WORK OF PRESENTLY CONSIDERED DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) DOCUMENTS
SERIES G SUPP 31-1988 STATUS OF WORK OF PRESENTLY CONSIDERED DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) DOCUMENTS
ITU-T G Suppl. 31-1988 Status of work of presently considered digital circuit multiplication equipment (DCME) documents
SERIE G SUPP 31 FRENCH-1988 STATUS OF WORK OF PRESENTLY CONSIDERED DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) DOCUMENTS

National Standardisation Body (ASRO)

STAS 4747-1976 Finished products from paper industry DETERMINAT ION OF THE STR?IN AT WKTTING AND OF THE RESIDUAL STR?IN
STAS 112/3-1990 Undercarriages for normal gauge railway rolling stock WORKED STATE TYRES Dimensions

Ente Nazionale Italiano di Unificazione

UNI 8847:1987 Calibration and performance routine tests of installed x and gamma radiation meters and monitors.

American Association of State Highway and Transportation Officials

AASHTO DIVISION I 5.13-1996 Limit States, Load Factors and Resistance Factors Interim 1997

Others: When the instrument is working,request work status,The working status of the instrument,Research working holiday,end of work,end of vacation, work,working status,Holiday work status,Holiday work status,working status,work during holidays,end of working holiday,Stable working state hydraulic radial sliding bearing,holiday is over,Instrument working status,Equipment working status,Post-holiday job analysis,Analysis of work status after vacation,Equipment working status