Relative Inherent Error Calculation

Relative Inherent Error Calculation, Total:65 items.

The international standard classification for "Relative Inherent Error Calculation" includes: Sewing machines and other equipment for the clothing industry .

The Chinese standard classification for "Relative Inherent Error Calculation" includes: Electric energy measurement and load control system , Sewing machine .

Professional Standard - Energy and Power Planning

DL/T 731-2000 Error calculator used in electrical energy meter calibrating

Group Standards of the People's Republic of China

T/QGCML 3187-2024 Intelligent oxygen gas detector indication error repeatability calculation and analysis software
T/QGCML 3189-2024 Intelligent volatile organic matter optical particle gas detector indication error repeatability calculation and analysis software
T/QGCML 3186-2024 Intelligent carbon monoxide gas detector indication error repeatability calculation system
T/QGCML 3188-2024 Intelligent sulfur hexafluoride gas detector indication error repeatability calculation software

Professional Standard - Light Industry

QB/T 4299-2012 Testing method of relative tolerance of sewing machine forward and backward stitch length
QB/T 4298-2012 Testing method of relative tolerance of sewing machine high and low speed stitch length

Professional Standard-Ships

CB*/Z 178-1980 Calculation and Inspection Method of Torque, Backlash and Transmission Error of Precision Gear Transmission Chain

International Electrotechnical Commission (IEC)

IEC 60904-7:1995 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
IEC 60205:2001/COR1:2002 Corrigendum 1 - Calculation of the effective parameters of magnetic piece parts
IEC 60205:2016/COR1:2018 Calculation of the effective parameters of magnetic piece parts; Corrigendum 1

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE 1484.12.1 CORR 1-2011 Learning Object Metadata Corrigendum 1 (IEEE Computer Society)
IEEE/ANSI C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors

American National Standards Institute （ANSI)

ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ASNI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ANSI/ASTM E1544:1994 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids
ANSI Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

Ente Nazionale Italiano di Unificazione

UNI 8941-3:1987 Coloured surfaces. Colorimetry. Calculation of colour differences.
UNI EN ISO 10360-6:2005 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
EC 1-2010 UNI EN ISO 10360-6:2005 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features

International Organization for Standardization (ISO)

ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
ISO 6976:1995/Cor 3:1999 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3
ISO 6976:1995/Cor 1:1997 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 1
ISO 6976:1995/Cor 2:1997 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 2
ISO 105-J03:1995/Cor 2:2006 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 2
ISO 105-J03:1995/Cor 1:1996 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 1
ISO 10360-6:2001/cor 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features; Technical Corrigendum 1
ISO 6976:1983 Natural gas; Calculation of calorific value, density and relative density

National Association of Corrosion Engineers (NACE)

NACE Paper 12985-2019 Error Analysis of Computational Modeling of AC Interference in Pipelines

Association Francaise de Normalisation

NF X10-106:1983 Fluid flow measurement - Calculation of the limiting error on a flow measurement
NF M03-051:2002 Solid mineral fuels - Calculation of oxygen content by difference
NF EN ISO 10360-6:2002 Geometrical product specifications (GPS) - Acceptance test and periodic verification of coordinate measuring machines (CMM) - Part 6: estimation of errors in the calculation of Gaussian associated elements
NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.

American Gear Manufacturers Association

10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error@ Noise and Stress in Loaded Spur Gears
AGMA 95FTM3-1995 Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears
AGMA 10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error, Noise and Stress in Loaded Spur Gears

Czech Standards Institute (UNMZ)

CSN 01 4310-1962 Matching of threads. Calculation of tolerances of medium deameter
CSN 38 5572-1988 Natural gas. Calculation of calorific value, density and relative density

Lithuanian Standards Office

LST EN ISO 6976:2005 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995 including Corrigendum 1:1997, Corrigendum 2:1997 and Corrigendum 3:1999)

Bureau of Indian Standards

IS 15635-6-2006 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate mesuring machines (CMM)-6 Estimation of errors in computing gaussian associated features

Standards Norway

NS-EN ISO 6976:2005 Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995 including Corrigendum 1:1997, Corrigendum 2:1997 and Corrigendum 3:1999)

Spanish Association for Standardization (UNE)

UNE-EN ISO 6976:2005 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995 including Corrigendum 1:1997, Corrigendum 2:1997 and Corrigendum 3:1999)
UNE-EN ISO 10360-6:2002/AC:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

British Standards Institution (BSI)

BS EN ISO 10360-6:2001 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
BS EN ISO 10360-6:2002 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
BS EN 60904-7:1998 Photovoltaic devices-Computation of spectral mismatch error introduced in the testing of a photovoltaic device
BS EN ISO 10360-6:2001(2008) Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6 : Estimation of errors in computing Gaussian associated features

National Electrical Manufacturers Association（NEMA)

NEMA C12.24 TR-2011 Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity Meters

Association of German Mechanical Engineers

VDI 2142-1962 Plain linkages; calculation of four-bar linkages for four given relative positions in finite and infinite adjacent distance

Gosstandart of Russia

GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness

Yugoslav Association for Standardization

JUS H.F8.304-1988 Hatural gas. Calculation of calorific valne, dtmsitjr and relative density

Italian Standards Body (UNI)

UNSIDER 28-1959 Quality inspection. The number of observations necessary for estimating the mean with predetermined error limits

Korean Agency for Technology and Standards (KATS)

KS B ISO 10360-6-2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features

Universal Oil Products Company (UOP)

UOP 948-1996 Relative Density of Gas Mixtures By Calculation From Composition

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10360-6:2016 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features

Danish Standards Foundation

DANSK DS/EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features

Indonesia Standards

SNI IEC 60904-7:2011 Photovoltaic Devices Part 7: Calculation of spectral mismatch errors when testing photovoltaic devices

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 10360-6:2014 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features

Others: Relative Inherent Error Calculation,How to calculate relative error,relative inherent error,Relative Inherent Error Detection,How to Calculate Relative Error