as+3418

as+3418, Total:73 items.

The international standard classification for "as+3418" includes: Products of the chemical industry in general , Piping systems , Other fluid storage devices , Cadmium, cobalt and their alloys .

The Chinese standard classification for "as+3418" includes: Dye , Marine auxiliary machinery and pipeline fittings maintenance and service , Petrochemical and chemical industry engineering , Iron alloy .

Professional Standard - Aviation

HB 3418-1983 Machine clip boring tool (for non-through holes)

Taiwan Provincial Standard of the People's Republic of China

CNS 3418-1991 Sasety Code for Power Press ( Safeguarding at the Point of Operation )

未注明发布机构

GJB 3418A-2018 Specification for heat transfer tubes of steam generators for submarine nuclear power plants

Military Standard of the People's Republic of China-General Armament Department

GJB 3418-1998 Specification for heat transfer tubes of steam generators for submarine nuclear power plants

Professional Standard - Chemical Industry

HG/T 3418-1988 Sulphur vat navy blue 4RB
HG/T 3418-2002 Sulphur vat navy blue 4RB
HGB 3418-1962 Precipitated silver
HG/T 3418-2010 Sulphur vat dark blue 4RB(C.I. Vat blue 43)

Professional Standard-Ships

CB/T 3418-1992 Technical Requirements for Repair of Marine Shaft Bearings, Stern Shafts and Pipelines

Professional Standard - Petrochemical Industry

SH/T 3418-2007 Technical specification of saddle for heat exchanger in petrochemical industry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3418-1982 Electrolytic manganese metal

Professional Standard - Commodity Inspection

SN/T 3418-2012 Detection and Identification of Cydia prunivora (Walsh)

农业农村部

NY/T 3418-2019 Grades and specifications of pleurotus eryngii

国家铁路局

TB/T 3418-2015 Structural performance design requirement of dining car

工业和信息化部

YD/T 3418-2018 Technical requirement of network traffic and performance monitoring and analysis of Packet Transport Network (PTN)

Anhui Provincial Standard of the People's Republic of China

DB3418/T 012-2021 Specifications for production and processing of special pastry workshops in Jingxian County
DB3418/T 019-2022 Specifications for electronic archives management of inspection and testing institutions

International Organization for Standardization (ISO)

ISO 3418:1975 Withdrawal of ISO 3418-1975

BG-BDS

БДС 3418-1973

German Institute for Standardization

DIN 3418:1998 Plastic slide fasteners - Design types, dimensions, materials

SCC

NS 3418:2020 Tender documents with performance description for design, engineering and consulting services - Structure and content
BS 3418:1961 Domestic sewing threads (cotton and linen)
VDI 3418-2013 Implementation of FE simulation benchmarks in sheet metal forming — planning, implementation, evaluation, interpretation and documentation of practical tests
VDI 3418-2013 Implementation of FE simulation benchmarks in sheet metal forming — planning, implementation, evaluation, interpretation and documentation of practical tests
DIN EN 3418 E:1992 Draft Document - Aerospace series; rivets, solid, 100Â° normal countersunk head, in nickel base alloy NI-P11, cadmium plated; metric series

IN-BIS

IS 3418-1968 Specification for oil- and solvent-resistant hoses of woven fabric reinforced rubber

IETF - Internet Engineering Task Force

RFC 3418-2002 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) (Part of STD 62; Obsoletes RFC 1907)

HU-MSZT

MSZ 3418-1987 Structure, parts and forms of Hungarian information retrieval systems

Japanese Industrial Standards Committee (JISC)

JIS R 3418:1991 Textile glass fabric curtains for casement and drapery
JIS F 3418:1976 Ships' sheaves

TR-TSE

TS 3418-1979 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS VOCABULARY AND SYMBOLS

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3418-2009 Aerospace series Rivets@ solid@ 100 degrees normal countersunk head@ in nickel base alloy NI-P11@ cadmium plated@ metric series (Edition P 1)
PREN 3418-1990 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head@ in Nickel Base Alloy NI-P11@ Cadmium Plated@ Metric Series
PREN 3418-1991 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head@ in Nickel Base Alloy NI-P11@ Cadmium Plated@ Metric Series (Issue P 1)

Society of Automotive Engineers (SAE)

SAE AS3418-1985 Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .250- 28UNJF-3A (Stress Rupture Resistant) FSC 5306
SAE AS3418-2006 BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5662, .250-28UNJF-3A (STRESS RUPTURE RESISTANT)
SAE AS3418B-2022 BOLT, MACHINE, DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .2500-28UNJF-3A (STRESS RUPTURE RESISTANT)
SAE AS3418A-2011 Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718, .2500-28UNJF-3A (Stress Rupture Resistant)

SE-SIS

SIS SS 3418-1980 Small craft — Carburettor flame arresters — Requirements and testing

Korean Agency for Technology and Standards (KATS)

KS L 3418-2005 Determination of lead and cadmium content in alumina powders(alkali fusion)
KS I 3418-2016 Waste-urethane rubber powder
KS L 3418-2020 Test method for determination of lead and cadmium content(Alkaline fusion)
KS I 3418-2014 Waste-urethane rubber powder
KS L 3418-2015 Test method for determination of lead and cadmium content(Alkaline fusion)
KS L 3418-2015(2020) Test method for determination of lead and cadmium content(Alkaline fusion)

RO-ASRO

STAS 3418-1952 Highway riveted iron bridges and solid bridges. Calculate special rules

NATO - North Atlantic Treaty Organization

STANAG 3418-1965 70 mm Film Cores (ED 1 AMD 3)
STANAG 3418-1991 Film Cores (ED 2 Amendment 1: 08/27/1992)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS3418-2012 BAG@ OPAQUE@ SINGLE ITEM (Rev 3)
NAS3418-1983 Bag@ Opaque@ Single Item (Rev 2)

European Association of Aerospace Industries

AECMA PREN 3418-1991 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series Issue P 1
AECMA PREN 3418-2009 Aerospace series Rivets, solid, 100 degrees normal countersunk head, in nickel base alloy NI-P11, cadmium plated, metric series Edition P 1
AECMA PREN 3418-1990 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series

CZ-CSN

CSN 75 3418-1987 Preventlon of surface and groud water contamination caused by road transport of oil and oil-derived products
CSN 42 3418-1978 Wrought nickel alloy NiSi2,5Mn0,6
CSN 67 3418-1959 Oil porcelain glaze. Text color painting 2118

Indonesia Standards

SNI 3418-2011 Cara uji kandungan udara dalam beton segar dengan metode tekan

NL-NEN

NEN 3418-1992 Ergonomics - Measurement of noise at the workplace General measurement method

IT-UNI

UNI 3418-1954 Cast valves for ship piping systems; right angle valves; control valves; valves with tapped covers DN 20-32, PN 16

VDI - Verein Deutscher Ingenieure

VDI 3418-2011 Realization of benchmarks for FE-simulations of sheet metal forming - Planning@ realization@ evaluation@ interpretation of practical tests

American Society for Testing and Materials (ASTM)

ASTM E3418-23 Standard Practice for Calculating Scientifically Justifiable Limits of Residues for Cleaning of Pharmaceutical and Medical Device Manufacturing Equipment and for Medical Devices
ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM F3418-20 Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)

Aerospace Industries Association

AIA NAS 3418-1983 Bag, Opaque, Single Item (Rev. 2)

SAE - SAE International

SAE AS3418B-2017 BOLT@ MACHINE@ DOUBLE HEX@ EXT WASHER HEAD@ CLOSE TOL. SHANK@ UNS N07718@ 185 KSI MIN@ .2500-28UNJF-3A (STRESS RUPTURE RESISTANT)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS3418-2012 BAG, OPAQUE, SINGLE ITEM Rev 3
AIA/NAS NAS 3418-1983 Bag, Opaque, Single Item (Rev. 2)

American National Standards Institute （ANSI)

ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis

Others: as+3418