light alloy

light alloy, Total:143 items.

The international standard classification for "light alloy" includes: Motorcycles and mopeds , Transmissions, suspensions , Drills, countersinks, reamers , Taps and threading dies .

The Chinese standard classification for "light alloy" includes: Motorcycles in general , Bearing system , Cutters , Cutting tools , Bearing system .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15704-2012 Road vehicles—Light alloy wheels—Impact test procedure
GB/T 22435-2008 light-alloy wheels for motorcycles and mopeds

Professional Standard - Aerospace

QJ 373-1989 Taper Shank Machine Reamer for Light Alloy D>10~32
QJ 372-1989 Parallel Shank Machine Reamer for Light Alloy D>4~12
QJ 374-1989 Shell Machine Reamer for Light Alloy D>23.6~50

Professional Standard - Aviation

HB 4169-1988 Short Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Dead Hole in Machining Light Alloy d=12~36mm
HB 4591-1992 Slot Milling Cutter for Three-tooth End Milling Cutter for Machining Light Alloy D=45~80mm
HB 677-1992 Milling Cutter - Welded Hard Alloy Screw Blade Shell End Milling Cutter Machining Light Alloy D=50~125mm
HB 3667-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=8~11mm
HB 4598-1992 Template and Reference Template for Cylindrical Milling Cutter Slot Milling Cutter for Machining Light Alloy for Examining HB 4587~92 Slot Milling Cutter
HB 723-1992 Milling Cutter - Cutter Tooth Used for Tipped Sleeve Facing Type Cutter with Welding Cemented Carbide Blade for Machining Light Alloy
HB 2367-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=10~20mm
HB 4242-2004 Through -- hole machine and hand taps of internal screw on light alloy for installing wire thread insert
HB 4623-1992 Milling Cutter - Two-gear Common Straight Shank End Milling Cutter Machining Light Alloy D=1.5~20mm
HB 4175-1988 Short Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Through Hole in Machining Light Alloy d=4~5mm
HB 4259-1989 Long handle machine with rear guide for installing wire nut through hole, hand tap for light alloy ST10×1~ST33×2
HB 2364-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=3~3.5mm
HB 3668-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=12~36mm
HB 692-1992 Milling Cutter - Side Set Three-edge Milling Cutter Machining Light Alloy D=63~100mm
HB 4245-2004 Non through -- hole machine and hand taps of internal screw on light alloy for installing wire thread insert
HB 2365-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=4~7mm
HB 4173-1988 Long Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Dead Hole in Machining Light Alloy d=12~36mm
HB 695-1992 Milling Cutter - Tipped Three-edge Milling Cutter Machining Light Alloy D=80~180mm
HB 725-1992 Milling Cutter - High Speed Steel Cutter Tooth for Manufacturing Light Alloy Toothed Double-edged and Three-edged Milling Cutter
HB 2356-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=1~3.5mm
HB 673-1979 Shell milling cutter for processing light alloy D=50~80mm
HB 2359-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=10~36mm
HB 3666-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=4~7mm
HB 673-1992 Milling Cutter - Shell End Milling Cutter Machining Light Alloy D=50~80mm
HB 3662-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=10~36mm
HB 2363-1977 Machine and hand taps d=12~36mm for processing light alloy non-through hole HB 241-75 thread
HB 695-1979 Insert tooth three-edge milling cutter for processing light alloy D=80～180mm
HB 4247-1989 ST10×1~ST33×2 for machine and hand taps for light alloys with non-through holes for installing wire thread inserts
HB 4587-1992 Slot milling cutter for two-tooth end milling cutter for machining light alloy D=30～75mm
HB 656-1979 Three-tooth taper shank end mill D=18~50mm for processing light alloy
HB 679-1992 Milling Cutter - Tipped Sleeve Facing Type Cutter for Welding Cemented Carbide Blade for Machining Light Alloy D=100~200mm
HB 4597-1992 Slot Milling Cutter Cylindrical Milling Cutter for Machining Light Alloy D=71~80mm
HB 688-1992 Milling Cutter - Processed Light Alloy Tipped Double-edge Milling Cutter (D=80~315mm)
HB 683-1979 D = 250~315mm for inserting sleeve type face milling cutter for welding carbide inserts for processing light alloys
HB 4178-1988 Long Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Through Hole in Machining Light Alloy d=3~3.5mm
HB 4596-1992 Template and Reference Template for Slot Milling Cutter for Shell End Milling Cutter for Machining Light Alloy for Inspecting HB 4595-92 Slot Milling Cutter
HB 4626-1992 Milling Cutter - Two-gear Morse Taper Shank Bulb End-milling Cutter for Light Alloy Machining d=8~50mm
HB 3868-1986 Technical Conditions for Helical Milling Cutter with Welded Hard Alloy for Machining Light Alloy
HB 4174-1988 Short Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Through Hole in Machining Light Alloy d=3~3.5mm
HB 700-1979 Saw blade milling cutter for processing light alloy D=63~200mm
HB 4589-1992 Cutter with Oblique Back Used for Two-tooth End Milling Cutter for Machining Light Alloy D=56~63mm
HB 3661-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=8mm
HB 4244-1989 ST10×1~ST33×2 for machine and hand taps for light alloys with through holes for threaded inserts
HB 647-1992 Milling Cutter - Cylindrical Milling Cutter for Machining Light Alloy D=50~100mm
HB 682-1992 Milling Cutter - Tipped Sleeve Facing Type Cutter for Machining Light Alloy D=250~315mm
HB 4625-1992 Milling Cutter - Three-gear Morse Taper Shank End-milling Cutter Machining Light Alloy D=14~50mm
HB 2366-1977 Spiral fluting machine for processing light alloy non-through hole HB241-75 thread, hand tap d=8mm
HB 4168-1988 Short Shank Machine, Hand Screw Tap with Rear Leading Part for Regular Screw Thread of Dead Hole in Machining Light Alloy d=6~11mm
HB 2357-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=4~7mm
HB 2362-1977 Machine and hand taps d=8~11mm for processing light alloy non-through hole HB 241-75 thread
HB 4595-1992 Slot Milling Cutter for Shell End Milling Cutter for Machining Light Alloy D=63~80mm
HB 3660-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=3~7mm
HB 2358-1977 Slotless machine for processing light alloy through hole HB241-75 thread, hand tap d=8mm
HB 678-1992 Inserted sleeve type face milling cutter for processing light alloy D=80~200mm
HB 4624-1992 Milling Cutter - Two-gear Ordinary Morse Taper Shank End-milling Cutter for Light Alloy Machining d=12~50mm
HB 4586-1992 Template and reference template for two-tooth end milling cutter grinding wheel for machining light alloy
HB 696-1992 Milling Cutter - Tipped Three-edge Milling Cutter for Machining Light Alloy D=200~315mm
HB 683-1992 Milling Cutter Tipped Sleeve Facing Type Cutter for Welding Cemented Carbide Blade for Machining Light Alloy D=250~315mm
HB 700-1992 Milling Cutter - Metal Saw Machining Light Alloy D=63~200mm
HB 2361-1977 Machine and hand taps d=4~7mm for processing light alloy non-through hole HB 241-75 thread
HB 2360-1977 Machine and hand taps d=1~3.5mm for machining light alloy non-through hole HB 241-75 thread
HB 682-1979 Inserted sleeve type face milling cutter for processing light alloy D=250~315mm

Professional Standard - Automobile

QC/T 221-1997 Performance requirements and test methods for light alloy wheels for automobile
QC/T 991-2015 Passenger cars―Light alloy wheels―90°impact test procedure
QC/T 29117.15-1993 Quality inspection of motorcycle and moped products - Quality evaluation method for light alloy wheels
QC/T 211-1996 Test method for light alloy wheels of motorcycle and mopeds

Taiwan Provincial Standard of the People's Republic of China

CNS 7135-1995 Light Alloy Disc Wheels for Automobiles

SCC

ADS AGS765 B.A. Bolts (Light Alloy)
ADS AGS1215 Pipe Couplings (Light Alloy Range) Light Alloy Banjo Bolt with Union Head Connection
ADS AGS576 Screwed Rod (Light Alloy)
ADS AGS958 Female Flanges (Light Alloy)
ADS AGS762 B.A. Nuts (Light Alloy)
ADS AGS908 Reducing Union Body (Light Alloy)
ADS AGS959 Special Female Flanges (Light Alloy)
ADS AGS957 Union Lock Nuts (Light Alloy)
ADS AGS1187 Standard Union Nuts (Light Alloy)
ADS AGS1617 Cleats, Single Hole Attachment (Light Alloy)

Society of Automotive Engineers (SAE)

SAE AGS576-4-1938 AGS576 Screwed Rod. (Light Alloy)
SAE AGS765-8 AGS765 B.A. Bolts. (Light Alloy)
SAE AGS958-11 AGS958 Female Flanges (Light Alloy)
SAE AGS576-4 AGS576 Screwed Rod. (Light Alloy)
SAE AGS762-9-1928 AGS762 B.A. Nuts. (Light Alloy)
SAE AGS765-8-1928 AGS765 B.A. Bolts. (Light Alloy)
SAE AGS1215-7-1946 AGS1215 Pipe Coupling (Light Alloy Range) Light Alloy Banjo Bolt with Union Head Connection
SAE AGS1215-7 AGS1215 Pipe Coupling (Light Alloy Range) Light Alloy Banjo Bolt with Union Head Connection
SAE AGS762-9 AGS762 B.A. Nuts. (Light Alloy)
SAE AGS908-9-1937 AGS908 Reducing Union Body. (Light Alloy)
SAE AGS908-9 AGS908 Reducing Union Body. (Light Alloy)
SAE AGS959-11 AGS959 Special Female Flanges (Light Alloy)
SAE AGS958-11-1950 AGS958 Female Flanges (Light Alloy)
SAE AGS957-6-1936 AGS957 Union Lock Nuts (Light Alloy)
SAE AGS1187-11-1945 AGS1187 Standard Union Nuts. (Light Alloy)
SAE AGS1617-4 AGS1617 Cleats, Single Hole Attachment (Light Alloy)
SAE AGS957-6 AGS957 Union Lock Nuts (Light Alloy)
SAE AGS1187-11 AGS1187 Standard Union Nuts. (Light Alloy)

ES-AENOR

INTA 12 01 12 12 01 13 Light alloy table (aluminum alloy)
INTA 12 03 23 Determination of manganese in light alloys
INTA 12 03 25 Determination of titanium in light alloys
INTA 12 03 34 Calcium determination of light alloys
INTA 12 23 10 Light alloy aluminum castings aluminum, magnesium. 10
INTA 12 29 10 Light alloy aluminum casting aluminum, tin 6.5
INTA 12 20 05 12 50 05 Light Alloy Professional Acceptance Specifications
INTA 12 23 20 Light alloy aluminum castings aluminum, magnesium. 4
INTA 12 21 20 Light alloy aluminum castings aluminum, copper. 8
INTA 12 38 10 Aluminum light alloy forged aluminum, manganese 1, 2
INTA 12 20 03 12 50 03 Light Alloy Casting Acceptance Specifications
INTA 12 21 10 Light alloy aluminum casting aluminum copper 10
INTA 12 21 40 Light alloy aluminum castings aluminum, antimony. 4.5
INTA 12 31 30 Aluminum light alloy forged aluminum, copper, magnesium 4.4
INTA 12 25 40 Light alloy aluminum castings aluminum, silicon, magnesium. 12
INTA 12 01 03 Designation of light alloy surface conditions
INTA 12 25 20 Light alloy aluminum castings aluminum, silicon, magnesium. 12
INTA 12 25 70 Light alloy aluminum castings aluminum, silicon, magnesium. 4.5
INTA 12 31 50 Aluminum light alloy forged aluminum, copper, nickel 4
INTA 12 37 10 Aluminum light alloy forged aluminum, zinc, magnesium 6
INTA 12 31 40 Aluminum light alloy forged aluminum, copper, magnesium 4.5
INTA 12 25 30 Light alloy aluminum castings aluminum, silicon, copper. 12
INTA 12 31 20 Aluminum light alloy forged aluminum, copper, magnesium. 42
INTA 12 21 50 Light alloy aluminum castings aluminum, copper, nickel. 4
INTA 12 25 80 Light Alloy Aluminum Models Aluminum, Silicon, Copper 2.5
INTA 12 21 60 Light alloy aluminum castings aluminum, copper, nickel. 1.5
INTA 12 25 10 Light alloy aluminum castings aluminum, silicon, nickel. twenty one
INTA 12 25 60 Light alloy aluminum castings aluminum, silicon, magnesium. 9
INTA 12 31 10 Aluminum light alloy forged aluminum, copper, magnesium. 4
INTA 12 21 30 Light alloy aluminum castings aluminum, copper, zinc. 7