plastic instrument case

plastic instrument case, Total:294 items.

The international standard classification for "plastic instrument case" includes: Electrical wires and cables , Other rubber and plastics products , Measurement of electrical and magnetic quantities , General purpose pallets , Barrels. Drums. Canisters , Cases. Boxes. Crates , Horology in general , Plastics in general , Cellular materials , Looms. Weaving machines , Reinforced plastics , Air transport .

The Chinese standard classification for "plastic instrument case" includes: Cable and its accessory , Packaging material and container , Daily use plastic products , Container, tray and pallet , Vegetable processing and products , Horology , Basic standards and general methods for synthetic resin and plastic , Marking, packaging, transport and storage , Synthetic materials in general , Hydrology and water conservancy instrument , Knitting machinery and apparatus , Fibre reinforced composites , Marking, packaging, transport and storage .

Professional Standard - Machinery

JB/T 14421-2023 Internal combustion engines —Plastic expansion tank—Specification
JB/T 4278.13-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 13:Forced air heat aging test oven
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 14706-2024 Plastic injection moulds for automotive instrument panels
JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 9:Oxygen bomb、air bomb aging test oven
JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 8:Low temperature test oven
JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
JB/T 14036-2021 Storage plastic containers
JB/T 14036-202 Storage plastic turnover box
JB/T 4278.6-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 6:Natural ventilation thermal aging test oven
JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
JB/T 12647-2016 Blow moulds for plastic automobile fuel tanks. Specifications

Professional Standard - Aquaculture

SC 5010-1997 Plastic fish box

Professional Standard - Agriculture

SC 5010-1983 plastic fish box
SC 9007-1987 Technical and hygienic requirements for plastic insulation fish boxes

Group Standards of the People's Republic of China

T/DLQG 1001-2017 Plastic box for food logistics
T/DLQG 1007-2017 Industrial parts logistics plastic box
T/XJSL 0004-2024 disposable plastic fruit packing box
T/DLQG 1006-2017 Fresh milk logistics plastic box
T/SERA 4-2024 PLASTIC CORE BOX
T/STIA 1-2017 General technical requirements for tool storage with plastic organizers
T/GDEACC 36-2021 Plastic backboard of refrigerator
T/HBZXL 004-2022 Plastic handle for paper packing box
T/ZZB 1447-2019 Plastic storage box
T/NJ 1163-2018 Plastic fuel tanks for agricultural and forestry tractors and machinery
T/DLQG 1005-2017 Beer logistics plastic box
T/WJZP 005-2022 Special plastic window for assembly container house
T/DLQG 1003-2017 Fruit and vegetable logistics plastic box
T/CFLP 0006-2017 Plastic Crates for Energy Measurement Instrument Size and Technical Requirement
T/DLQG 1002-2017 Canned logistics plastic box
T/DLQG 1004-2017 Fresh egg logistics plastic box
T/XJSL 0004-2019 disposable plastic fruit packing box

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28798-2012 Plastic storage box
GB 8673-1988 Packages for transporting and storing eggs--Technical requirements of the plastic boxes
GB 8868-1988 Plastic container for vegetable
GB/T 5738-1995 crates for beverage bottled
GB/T 5737-1995 container for food
GB/T 8868-1988 Vegetable plastic turnover box
GB/T 31081-2014 Plastic box pallets
GB/T 44559.1-2024 Plastics—Determination of puncture impact behaviour of rigid plastics—Part 1: Non-instrumented impact testing
GB/T 26689-2024 Rigid polyurethane cellular plastics used in refrigerators and freezers
GB 19161-2003 Packing containers―Intermediate bulk containers for package of dangerous goods
GB/T 8673-1988 Technical requirements for plastic boxes for storage and transportation of fresh eggs
GB/T 22776-2008 Tolerances and fits for timekeeping instruments - Tolerances of plastic parts

Professional Standard-Ships

CB* 3060-1979 plastic mirror box

Professional Standard - Goods and Materials

WB/T 1126-2022 Plastic box pallet

Professional Standard-Packaging

BB/T 0043-2007 Plastic logistics containers

Taiwan Provincial Standard of the People's Republic of China

CNS 6858-1981 ABS Attache Case
CNS 11650-1986 Glassfiber Reinforced Plastic Electric Enclosure
CNS 14131-1998 Plastic fuel tanks for passenger cars
CNS 11908-2002 Plastic box for low voltage A.C power meter
CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)
CNS 11908-2008 Plastic box and fix plate for low voltage A.C. power meter
CNS 8158-1981 Method of Test for ABS Travel Case (Luggage Suitcase)
CNS 6859-1981 ABS Beauty Case (Toilet Case)
CNS 12627-1989 General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens
CNS 6857-1981 ABS Travel Case (Luggage Suitcase)
CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
CNS 8160-1981 Method of Test for Beauty Case (Toilet Case)
CNS 8159-1981 Method of Test for ABS Attache Case

Anhui Provincial Standard of the People's Republic of China

DB34/T 1664-2012 Automotive Plastic Fuel Tank

Professional Standard - Automobile

QC/T 1121-2019 Plastic fuel tank for vehicle

Professional Standard - Water Conservancy

SL 369-2006 Instrument for dam monitoring-terminal box

Professional Standard - Light Industry

QB/T 1989-1994 Tolerances for chronograph instruments and tolerances for mating plastic parts

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2830-2007 Single use plastic container for fruit

Professional Standard - Textile

FZ/T 94033-1995 Plastic shooting-in knot for silk loom with multiple shuttle boxes

Professional Standard - Building Materials

JC/T 658.1-1997 Glass fiber reinforced plastic water tank part one SMC combined water tank
JC/T 658.1-2007 Glass fiber reinforced plastics water tanks Part 1:SMC sectional water tanks

Professional Standard - Aviation

HB 7461.3-1996 Calcium Plastic Box Transport Package - Structure Form of Box
HB 7461.2-1996 Calcium Plastic Box Transport Package - General Specification

Korean Agency for Technology and Standards (KATS)

KS B 5552-2019 Impact testing machines for plastic materials－Instrumentation
KS B 5552-2004(2024) Impact testing machines for plastic matelials－Instrumentation
KS B 5552-2024 Impact testing machines for plastic matelials－Instrumentation
KS C 8436-2012(2017) Boxes and covers of plastic conduits
KS I 3316-2014 Recycled plastic seedling box
KS I 3316-2016 Recycled plastic seedling box
KS M 3071-2019 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS I 3275-2016 Recycled plastics temporary distribution board boxes
KS I 3275-2014 Recycled plastics temporary distribution board boxes
KS M ISO 6603-2:2002 Plastics － Determination of puncture impact behaviour of rigid plastics － Part 2: Instrumented impact testing
KS R 1123-2004 Test methods of fuel tanks made of plastic material for passenger car
KS P 5107-1976 Dentistry — Dental plastic filling instrument
KS M 3528-2025 Recycling bins made from recycling plastics
KS P 5107-2018 Dentistry — Dental plastic filling instrument
KS M ISO 6603-2-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 6603-2-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS R 1123-2019 Test methods of plastic fuel tanks for passenger car
KS M ISO 6603-1-2023 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
KS M ISO 6603-1-2002(2022) Plastics － Determination of puncture impact behaviour of rigid plastics － Part 1: Non-instrumented impact testing
KS R 1123-2014(2019) Test methods of plastic fuel tanks for passenger car
KS F 3230-2020 WPC(Wood Plastic Composite) deck board
KS R 1123-2024 Test methods of plastic fuel tanks for passenger car
KS M ISO 6603-2-2023 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
KS M 3071-2004 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 3088-1994 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M 3088-2013 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M ISO 6603-1-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 1：Non-instrumented impact testing
KS B 5552-2004(2019) Impact testing machines for plastic matelials－Instrumentation
KS R 1123-2014 Test methods of plastic fuel tanks for passenger car
KS M ISO 13468-2-2007(2017) Plastics － Determination of the total luminous transmittance of transparent materials － Part 2: Double-beam instrument
KS I 3325-2016 Recycled plastics for the use of automobile trunk trim
KS M ISO 13468-1-2007(2022) Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS M ISO 13468-2-2007(2022) Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS M ISO 13468-1-2022 Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS I 3325-2014 Recycled plastics for the use of automobile trunk trim
KS M ISO 11443:2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M ISO 11443:2007 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers

American National Standards Institute （ANSI)

ANSI Z124.6-1997 Plastic sinks
ANSI/NSF 21(i5)-2012 Thermoplastic refuse containers
ANSI Z124.5-1997 Plastic toilet (water closet) seats
ANSI Z124.4-1996 Plastic water closet bowls and tanks
ANSI/NEMA OS2-2010 Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/ASABE S596-2006 Recycling Plastic Containers from Pesticides and Pesticide-Related Products

Thai Industrial Standards Institute (TISI)

TIS 1379-2008 Plastics water tanks
TIS 435-2005 Glassfibre relnforced plastics water tanks

German Institute for Standardization

DIN 12254:1980 Plastics laboratory ware; stoppers
DIN 55418:1986 Plastic stacking box
DIN 49073-1:1990 Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions
DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN 12871:1983 Laboratory apparatus in rubber and plastics; elastomer stoppers
DIN 55427:1983-06 Packaging means; plastic crates; 12 bottle size
DIN 3268:1989 Plastic flushing tubes for flushing cisterns
DIN EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 6603-2:2022-05 Plastics – Determination of puncture impact behaviour of rigid plastics – Part 2: Instrumented impact testing
DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
DIN EN ISO 6603-2:2002-04 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 / Note: To be replaced by DIN EN ISO 6603-2 (2022-05).
DIN 3268:1989-08 Plastic flushing tubes for flushing cisterns
DIN EN ISO 13468-1:2019-10 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019); German version EN ISO 13468-1:2019
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015

Czech Standards Institute (UNMZ)

CSN 26 9311-1975 Plastic crates for bottles
CSN 37 0119-1962 Sealing cap for plastic box for electrical installation
CSN 26 9315-1986 Plastic crates. Verification of protective properties of bottle crates
CSN 26 9307-1984 Plastic crates. Testing method resistance by stacking
CSN 26 9302-1987 Plastic crates with partitioning insert. Ba- sic parameters.
CSN 37 0113-1962 Cap for plastic round box for electrical installations under plaster

Military Standards (MIL-STD)

DOD A-A-54397-1991 TIP, DENTAL SUCTION APPARATUS, PLASTIC
DOD A-A-53787-1988 COLLECTING TUBING SET, UTERINE, PLASTIC, DISPOSABLE
MIL MIL-I-36050A-1972 INSERT CABINET, MEDICAL INSTRUMENT AND SUPPLY SET CHEST PLASTIC DRAWERS (SUPERSEDING MIL-I-36050)
MIL MIL-C-36961A-1975 CASE, MEDICAL INSTRUMENT AND SUPPLY SET, PLASTIC, RIGID (SUPERSEDING MIL-C-36961)

National Aeronautics and Space Administration (NASA)

NASA UFGS-12 34 00-2010 MANUFACTURED PLASTIC CASEWORK

Standard Association of Australia （SAA）

AS 1535:1975 Moulded plastics household garbage cans
AS 1533:1976 Portable plastics fuel tanks for boats

International Federation of Trucks and Engines

NAVISTAR TMS 7045-1982 VOID - Tank, Fuel, Molded Plastic

Magyar Szabványügyi Testület

MNOSZ 15584-1953 Glass box instrument water detection
MSZ 7535-1984 Plastic transport box. High temperature resistance test and detection
MSZ 7536-1984 Plastic transport boxes, stability testing of handles

Swedish Institute for Standards

SIS 71 32 01-1959 Transport container of plastic
SIS SS 430 01 01-1980 Meter boards
SIS SS 3415-1987 Plastics pipes and fittings - Box loading test
SIS SS IEC 729:1986 Nuclear instrumentation - Multiple controllers in a CAMAC crate
SS-EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)

Polski Komitet Normalizacyjny (PKN)

PN C04243-1972 Plastics Determination of bending strength using a Dynstat type apparatus
PN O79834-09-1989 Plastics transport packages Cases cells 330
PN O79834-11-1990 Plastics transport packages Cases cells 500
PN O79834-12-1990 Plastics transport packages Cases cells 750
PN O79834-10-1990 Plastics transport packages Cases celles 375
PN O79834-13-1990 Plastics transport packages Cases cells 1000
PN O79834-08-1989 Plastics transport packages Cases cells 250
PN O79834-05-1987 Plastics transport packages Cases celles Tests
PN O79835-09-1989 Plastics transport packages Cases without colls Cases for dairy products
PN O79835-12-1990 Plastics transport packages Cases without colls Cases for fishes
PN O79833-1986 Plastics cases Determination of resistance to load accumulation
PN O79834-03-1987 Piastics transport packages Cases cells Specifications
PN O79835-11-1989 Plastics transport package? Cases without colls Cases for bakery products
PN O79832-1986 Plastics cases Determination of resistance of base plate to weighting static
PN O79834-01-1987 Plastics transport packages Cases cells General regulations
PN O79835-05-1987 Plastics transport packates Cases withnut cells Tests

Japanese Industrial Standards Committee (JISC)

JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
JIS T 5504-2:2001 Dental rotary instruments -- Shanks -- Part 2: Shanks made of plastics
JIS K 7211-1:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
JIS K 7129:2008 Plastics --Film and sheeting -- Determination of water vapour transmission rate -- Instrumental method

Defense Logistics Agency

DLA A-A-50025 A VALID NOTICE 1-2003 TRUCK, HAND, BOX, LAUNDRY, PLASTIC
DLA A-A-50025 A-1992 TRUCK, HAND, BOX, LAUNDRY, PLASTIC
DLA MIL-C-11347 E NOTICE 1-1998 CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT
DLA MIL-C-11347 E-1977 CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT
DLA MIL-C-18312 F VALID NOTICE 1-2007 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR

U.S. Military Regulations and Norms

ARMY MIL-C-43103 D-1988 CANTEEN, WATER, PLASTIC, WITH SCREW CAP

European Committee for Standardization (CEN)

EN ISO 9801:2009 Ophthalmic instruments - Trial case lenses (ISO 9801:2009)
EN ISO 9801:1999 Ophthalmic Instruments - Trial Case Lenses ISO 9801:1997
EN ISO 6603-1:1996 Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics - Part 1: Falling Dart Method
EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)

British Standards Institution (BSI)

BS EN ISO 9801:1997 Ophthalmic instruments - Trial case lenses
BS EN ISO 9801:2010 Ophthalmic instruments. Trial case lenses
BS EN ISO 9801:2009 Ophthalmic instruments - Trial case lenses
BS EN ISO 6603-2:1997 Plastics. Determination of multi-axial impact behaviour of rigid plastics-Instrumented puncture test
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing
BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)
BS 5627:1984(2007) Specification for plastic water tank connectors
BS ISO 13468-2:1999 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS EN ISO 13468-1:2019 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS EN ISO 6603-1:2000 Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing
BS EN ISO 3630-5:2011 Dentistry. Endodontic instruments. Shaping and cleaning instruments
BS EN ISO 6603-2:2000(2002) Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2 : Instrumented puncture testing
BS 3735:1987 Specification for plastics and rubber dustbin lids
BS 3735:1987(2012) Specification for Plastics and rubber dustbin lids
BS EN ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics Instrumented impact testing (British Standard)
BS PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS 4998:1985(2012) Specification for Moulded thermoplastics dustbins (excluding lids)
BS EN ISO 179-2:1999+A1:2012 Plastics. Determination of Charpy impact properties. Instrumented impact test
BS EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Instrumented impact test
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS 2782-11 METHOD 1102B:1981 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Longitudinal reversion of pipes: oven method
BS EN ISO 179-1:1999 Plastics. Determination of Charpy impact properties-Non-instrumented impact test

International Organization for Standardization (ISO)

ISO 9801:1997 Ophthalmic instruments - Trial case lenses
ISO 9801:2009 Ophthalmic instruments - Trial case lenses
ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics. - Part 2: Instrumented impact testing
ISO 13468-1:2019 Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
ISO 1137:1975 Plastics — Determination of behaviour in a ventilated tubular oven

The Standards, Productivity and Innovation Board

SS 369-2014 Specification for moulded thermoplastic refuse bins

Association Francaise de Normalisation

NF S12-140*NF EN ISO 9801:2010 Ophthalmic instruments - Trial case lenses
NF S12-140:1999 Ophthalmic instruments. Trial case lenses.
NF EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented impact testing
NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF T51-065-1*NF EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1 : single-beam instrument
NF EN ISO 384:2016 Glass or plastic laboratory equipment - Principles of design and construction of volumetric instruments
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 6603-1:2000 Plastics - Determination of the behavior of perforated rigid plastics under the effect of an impact - Part 1: non-instrumented impact tests

GM North America

GM GM7473M-1999 Coextruded Multi-Layer Plastic Fuel Tank
GM GM9300P-2001 Impact Test for Plastic Materials (Instrumented or Non-Instrumented)

International Association of Plumbing and Mechanical Officials

IAPMO Z124.4-2006 Plastic Water Closet Bowls and Tanks
IAPMO PS 54-2021a Metallic and Plastic Utility Boxes

Canadian General Standards Board （CGSB)

CAN/CGSB-43.84-M89-1989 Hardboard crates for plastic inner containers (TC-12P)
CGSB 41.22-93-CAN/CGSB-1993 Fibreglass-Reinforced Plastic Corrosion- Resistant Equipment

Bureau of Indian Standards

IS 15532-2004 Plastics Crates for Fruits and Vegetables
IS 2326-1987 Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)
IS 7231-1994 Plastic flushing cisterns for water-closets and urinals -specification
IS 15547-2005 Automotive vehicles - Plastic fuel tank for four wheelers
IS 7078-1973 Plastics used in the instrumentation industry (first Rvprint August 1984)

Gosstandart of Russia

GOST R 51977-2002 Plastic accumulator cases. Specifications
GOST 34163.2-2017 Plastics. Determination of puncture impact behaviour of rigid. Plastics. Part 2. Instrumented method

Spanish Association for Standardization (UNE)

UNE 53250:1991 PLASTICS. PLASTIC BOXES FOR TRANSPORT OF FISH. CHARACTERISTICS AND TEST METHODS.
AENOR UNE 53250:1991 Plastic materials. Plastic boxes for transporting fresh fish. Characteristics and test methods.
UNE-EN ISO 13468-1:2020 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
UNE-EN ISO 13468-2:2022 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
UNE-EN ISO 6603-1:2001 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing. (ISO 6603-1:2000)
AENOR UNE-EN ISO 6603-2:2001 Plastics - Determination of puncture impact behavior of rigid plastics - Part 2: Instrumented puncture test. (ISO 6603-2:2000)

Standards Norway

NS 1639-1969 Fish boxes made of plastic materials - Quality requirements
NS 1639:1969 Fish boxes made of plastic materials - Quality requirements
NS-EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
NS 2957:1972 Plastic pipes — Oven test for moulded fittings
NS-EN ISO 6603-1:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
NS-EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 13468-1:1998 Plastics - Determination of the total luminous transmittance of transparent materials - Single-beam instrument.
UNI ISO 6603-2:1992 Plastics. Determination of the behavior of rigid plastic materials under multiaxial impact. Instrumental drilling test
UNI EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
UNI 4319-1959 Level. Diesel composite indicator cock box
UNI 5564:1965 Aircraft. Sizes and mounting dimensions of instrument cases (rear-mounting type).
UNI EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument
UNI EN 13575:2005 Thermoplastic tanks made from blow or rotational moulded polyethylene - Tanks for the above ground storage of chemicals - Requirements and test methods

GM Holden Ltd

HOLDEN HN 2173-2012 Tie-Layer Adhesive for Plastic Fuel Tanks
HOLDEN HN 2173-1996 Tie-Layer Adhesive for Plastic Fuel Tanks
HOLDEN HN 0251-1997 Peel Strength Test For Multilayer Plastic Fuel Tanks
HOLDEN HN 2174-2012 Ethylene Vinyl Alcohol Barrier Layer for Plastic Fuel Tanks
HOLDEN HN 2174-1996 Ethylene Vinyl Alcohol Barrier Layer for Plastic Fuel Tanks
HOLDEN HN 0251-2012 Peel Strength Test for Multi Layer Plastic Fuel Tanks

American Water Works Association (AWWA)

AWWA C710-2002 Cold-Water Meters - Displacement Type, Plastic Main Case

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 12091:2016 Structured-wall thermoplastics pipes -- Oven test
BH GSO ISO 6603-1:2016 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing

National Sanitation Foundation (NSF)

NSF 21-2007 Thermoplastic Refuse Containers Printed 04/30/2007
NSF 21-2003 Thermoplastic Refuse Containers Printed 03/27/03;

Society of Automotive Engineers of Japan JSAE

JASO B302-1994 Fuel tanks made of plastic material for passenger cars

Danish Standards Foundation

DANSK DS/ISO 6603-2:2023 Plastics – Determination of puncture impact behaviour of rigid plastics – Part 2: Instrumented impact testing
DANSK DS/EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DANSK DS/EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
DS/EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DANSK DS/ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument
DANSK DS/ISO 13468-1:2019 Plastics – Determination of the total luminous transmittance of transparent materials – Part 1: Single-beam instrument
DANSK DS/EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
DANSK DS/ISO 4787:2021 Laboratory glass and plastic ware – Volumetric instruments – Methods for testing of capacity and for use

Austrian Standards

ONORM S 2013-1987 Dust bin, plustic, 1101; marking oj conformity
ONORM E 6570-1994 Meter mounting boards made of plastic

American Society for Testing and Materials (ASTM)

ASTM STP 936-1987 Instrumented Impact Testing for Plastics and Composites

GM Europe

GME GMI 08010 V-1998 General Requirements for Plastic Fuel Tanks, Verification Part (English/German; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3086.)

Indonesia Standards

SNI ISO 6603-1:2011 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
SNI 7276-2014 Plastik - Tangki air silinder vertikal - Polietilena (PE)
SNI 7276:2014 Plastik - Tangki air silinder vertikal - Polietilena (PE)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 6603-2:2013 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing

Association of German Mechanical Engineers

VDI 3822 Blatt 2-1-10-2012 Significant instrumental analysis methods for failure analysis of products made of plastics

Bureau of Philippine Standards

PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments

Underwriter Laboratories of Canada (ULC)

ULC Subject C30C-1973 Guide for Testing of Portable PLastic Fuel Tanks for Marine Use

Lithuanian Standards Office

LST EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
LST EN ISO 6603-1:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)

Belgian Standards Institute

NBN C 73-335-24-1990 Safety of household appliances and similar instruments, special provisions for refrigerators and freezers

GCC Standardization Organization

GSO ISO 4787:2024 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
BH GSO ISO 4787:2024 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use