astm roughness standard

astm roughness standard, Total:132 items.

The international standard classification for "astm roughness standard" includes: Paper and board , Rubber and plastics products , Properties of surfaces , Iron and steel castings .

The Chinese standard classification for "astm roughness standard" includes: Paper pulp and paperboard , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Casting , Nonmetal material testing machine .

Taiwan Provincial Standard of the People's Republic of China

CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 10793-1984 Roughness Comparison Specimens
CNS 7868-1981 Surface Roughness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 13841-1992 roughness for electronic ceramic parts
GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)
GB/T 1031-1995 Surface rouglness--Parameters and their values
GB/T 14234-1993 roughness for plastic parts

Professional Standard - Aviation

HB 6172-1988 General Surface Roughness

Professional Standard - Military and Civilian Products

WJ/Z 314-1991 Fuze parts surface roughness

Professional Standard - Light Industry

QB/T 1056-1991 Bendtsen Roughometer

轻工业部

QB 1056-1991 Bentson roughness tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 15056-2017 Casting surface roughness-Appraising method

Group Standards of the People's Republic of China

T/SBX 064-2022 Virtual roughness meter system for skin pass unit

National Metrological Technical Specifications of the People's Republic of China

JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens

RO-ASRO

STAS R 6859-1968 Surface roughness. Roughness selection criteria
STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
STAS 12192-1984 G?ARS Choice or precisions and roughness gear
STAS 11124-1978 GROUND TALC General technical requirements for crudity

NL-NEN

NEN 3636-1980 Surface roughness - Roughness comparison specimens
NEN 3635-1980 Surface roughness - Measurement of fla roughness value
LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method

SCC

NS 982:1969 Surface roughness, reference lengths and roughness values
BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
CSA B95-1962(R2002) Surface Texture (Roughness, Waviness and Lay)
AWWA JAW24296 Journal AWWA — Predicting Internal Roughness in Water Mains
NACE SP0616-2022 Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock

Korean Agency for Technology and Standards (KATS)

KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-2016 Roughness Comparison Specimens
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0161-1999 Surface roughness-Definitions and designation
KS M 3817-2004 Methods for comparison of surface roughness of plastics
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
KS B 0162-2013 Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-1975(2011) Roughness Comparison Specimens

SE-SIS

SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SMS 672-1964 Drawing Rules, Declaration of Surface Roughness
SIS SS 81 73 46-1989 Doors — Sizes, flatness, squareness and roughness — Requirements

German Institute for Standardization

DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21

HU-MSZT

MSZ 9654-1966 Surface roughness
MSZ KGST 849-1978 Roughness sample cut surface
MSZ 9654/1-1986 Cut surface roughness sample
MSZ 15-1968 Technical drawing. Mechanical drawing roughness
MSZ KGST 1632-1979 Surface roughness marking on technical drawings
MSZ KGST 638-1977 Surface roughness parameters and main values
MSZ 4722-1984 Surface roughness parameters and main parameter values

CU-NC

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

TR-TSE

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

Society of Automotive Engineers (SAE)

SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY

SAE - SAE International

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay

CH-SNV

VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

YU-JUS

JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

CZ-CSN

CSN 01 4456-1983 Surface rouglmess of castings
CSN 73 2520-1993 Surface roughness of stmctures
CSN ON 01 4452-1962 Surface roughness of water pipe parts
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
CSN ON 28 2109-1964 Surface roughness of electric two-wheel parts
CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 02 1301-1961 Rough hexagon bolts

Danish Standards Foundation

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

RU-GOST R

GOST 7016-2013 Products of wood and wood materials. Roughness parameters
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 16241-1970 Chill moulds. Roughness of surface

IN-BIS

IS 3073-1967 Assessment of surface roughness
IS 9894-1981 Test method for paper smoothness/roughness

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS K 7104:1976 Methods for comparison of surface roughness of plastics

The American Road & Transportation Builders Association

AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements

GOST

GOST R 70117-2022 Surface roughness. Selection recommendations

AASHTO - American Association of State Highway and Transportation Officials

PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements
T286-1990 Standard Specification for Measurement of Vehicular Response to Traveled Surface Roughness (Eighteenth Edition; ASTM E 1082-90)
T286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness (Twentieth Edition; ASTM E1082-90)

International Organization for Standardization (ISO)

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition

AT-ON

ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM M 1118-1986 Technical surjaces; roughness comparison specimens

Standard Association of Australia （SAA）

AS 2382:1981 Surface roughness comparison specimens

BR-ABNT

ABNT NB-93-1964 Surface roughness. Brazilian Norms

GM North America

GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay

AIA/NAS - Aerospace Industries Association of America Inc.

NAS30-1956 Surface Roughness Designation (Rev 4)

Indonesia Standards

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.

American Society for Testing and Materials (ASTM)

ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane