Conditions for choosing mobile phase

Conditions for choosing mobile phase, Total:117 items.

The international standard classification for "Conditions for choosing mobile phase" includes: Analytical chemistry in general , Semiconductor devices in general , Other equipment for the chemical industry .

The Chinese standard classification for "Conditions for choosing mobile phase" includes: Electrochemical, thermochemistry and optical profile type analyzer , Mechanical gadgets and components , Low voltage apparatus in general , Semiconductor rectifier devices , Non-metal chemical machinery equipment .

Professional Standard - Machinery

JB/T 9362-1999 Specification for ion selective electrodes
JB/T 10181.31-2014 Electric Cables - Calculation of the Current Rating - Part 31: Sections on Operating Conditions - Reference Operating Conditions and Selection of Cable Type
JB/T 10181.32-2014 Calculation of the Current Rating of Electric Cables - Part 32: Operating Conditions Related Economic Optimization of Power Cable Size

工业和信息化部

YD/T 2718-2014 Technical specification for wavelength selective switch(WSS)

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 248-1997 Selection conditions for solar greenhouse vegetable production bases

Professional Standard - Aviation

HB/Z 403-2013 Selection and Application Guidelines for Electrical Overcurrent Protection Devices
HB/Z 203-1991 Selection of airplane wobble bearing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 25842.2-2012 Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions

Professional Standard - Electricity

DL/T 872-2016 Specification for single phase-to-ground fault selection device in neutral point non-effectively grounded system

Professional Standard - Aerospace

QJ 2661-1994 Screening Technical Conditions for Silicon-Bridge Rectifier

Professional Standard - Chemical Industry

HG/T 2482-1993 Technical Specification of Gaseous Phase Steady Flow Valves

Professional Standard - Commodity Inspection

SN/T 4779.2-2017 Determination of chloride in bottled water for export—Method by ion selective electrode flow injection analysis

Korean Agency for Technology and Standards (KATS)

KS C IEC 60287-3-1-A:2014 Electric cables — Calculation of the current rating — Part 3-1: Sections on operating conditions — Reference operating conditions and selection of cable type
KS C IEC 60287-3-1-A-2019 Electric cables — Calculation of the current rating — Part 3-1: Sections on operating conditions — Reference operating conditions and selection of cable type
KS C IEC 60287-3-1-A-2014(2019) Electric cables — Calculation of the current rating — Part 3-1: Sections on operating conditions — Reference operating conditions and selection of cable type
KS C IEC 60287-3-3:2014 Electric cables — Calculation of the current rating — Part 3-3: Sections on operating conditions — Cables crossing external heat sources
KS H ISO 21160:2021 Cigarettes — Determination of selected carbonyls in the mainstream smoke of cigarettes — Method using high performance liquid chromatography

Society of Automotive Engineers (SAE)

SAE AIR1244B-2022 Aerospace, Slipper Seals, Selection for Fluid Power Applications
SAE AIR1244-1973 SELECTING SLIPPER SEALS FOR HYDRAULIC-PNEUMATIC FLUID POWER APPLICATIONS

ESDU - Engineering Sciences Data Unit

ESDU 88018-1988 Selection of alloys for hydrodynamic bearings.
ESDU 80012 A-2002 Dynamic sealing of fluids. I: guide to selection of rotary seals.
ESDU 80012-1980 DYNAMIC SEALING OF FLUIDS. 1: GUIDE TO SELECTION OF ROTARY SEALS
ESDU 82024-1982 A guide to the selection of cam and follower type.

IETF - Internet Engineering Task Force

RFC 6909-2013 IPv4 Traffic Offload Selector Option for Proxy Mobile IPv6
RFC 6088-2011 Traffic Selectors for Flow Bindings

American Society for Testing and Materials (ASTM)

ASTM E312-96 Standard Practice for Description and Selection of Conditions for Photographing Specimens
ASTM E312-06 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)
ASTM E312-02 Standard Practice for Description and Selection of Conditions for Photographing Specimens

HU-MSZT

MNOSZ 19649-1955 Choice of strong current rods
MI 22107/1-1987 Selection of sealing strips, electrostatic seals

RO-ASRO

STAS SR CEI 815-1986 Guide for the selection of insulators in respect of polluted conditions

British Standards Institution (BSI)

BS 7769-3.1:1997 Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type
PD IEC/TR 61912-2:2009 Low-voltage switchgear and controlgear. Over-current protective devices. Selectivity under over-current conditions
PD IEC/TS 60815-4:2016 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Insulators for d.c. systems
BS PD IEC/TS 60815-4:2016 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Insulators for d.c. systems
PD ISO/TR 10946:2019 Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
BS EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS DD IEC/TS 60815-3:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Polymer insulators for a.c. systems
BS DD IEC/TS 60815-3:2009 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Polymer insulators for a.c. systems

SCC

BS PD IEC/TR 61912-2:2009 Low-voltage switchgear and controlgear. Over-current protective devices-Selectivity under over-current conditions
MIL MIL-V-47322/1-1987 VALVE, SELECTOR, MANUALLY OPERATED (NO S/S DOCUMENT)
CEI 17-123:2011 Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions
MIL MIL-STD-1353C-2014 Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of
DANSK DS/EN 3717:2008 Aerospace series - Tubes - Selection for engines fluid systems
NS-EN 3717:2008 Aerospace series — Tubes — Selection for engines fluid systems
BS PD ISO/TR 10946:2019 Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
VDI/VDE 2644-2001 Selection and use of flow measuring devices
NEMA MG 10-2001(R2007) Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
MIL MIL-HDBK-1861B-2013 Selection and Use of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
AWWA IMTECH57879 A Fast Track Approach to Software Selection
AWWA DSS90027 Use and Selection of Automatic Air Valves

South African Bureau of Standard

SANS 60815:1986 Guide for the selection of insulators in respect of polluted conditions

Association Francaise de Normalisation

NF C46-504:1993 INDUSTRIAL-PROCESS CONTROL VALVES. PART 2 : FLOW CAPACITY. SECTION TWO : SIZING EQUATIONS FOR COMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS. (EUROPEAN STANDARD EN 60 534-2-2).
NF EN 3717:2008 Aerospace series - Tubes - Selection for fluid circuits for engine applications
NF E26-112:1996 Guidance on the selection of roller chain drives.
NF E26-112*NF ISO 10823:2004 Guidelines for the selection of roller chain drives
NF T76-109*NF EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints.

International Electrotechnical Commission (IEC)

IEC TR 60815:1986 Guide for the selection of insulators in respect of polluted conditions
IEC 60287-3-1:1995+AMD1:1999 CSV Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
IEC 60287-3-1:1995 Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type
IEC TR 61912-2:2009 Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions
IEC 60287-3-1:1995/AMD1:1999 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type; Amendment 1

GSO

OS GSO IEC 60287-3-1:2015 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
BH GSO IEC 60287-3-1:2016 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
GSO IEC 60287-3-1:2015 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
GSO IEC/TR 61912-2:2015 Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions
BH GSO IEC/TR 61912-2:2016 Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions
BH GSO ISO 10946:2017 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports
OS GSO ISO 10946:2016 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports
GSO ISO 10946:2016 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports
BH GSO IEC TS 60815-4:2022 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems
GSO IEC TS 60815-4:2021 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems

PL-PKN

PN E05002-1974 Choice of high voltage apparatus in regard of short - -circuit conditions

National Electrical Manufacturers Association（NEMA)

NEMA MG 11-1977 ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF SINGLE-PHASE MOTORS
NEMA MG 10-2001 ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF FIXED FREQUENCY MEDIUM AC SQUIRREL-CAGE POLYPHASE INDUCTION MOTORS

Danish Standards Foundation

DS/EN 3717:2008 Aerospace series - Tubes - Selection for engines fluid systems

Lithuanian Standards Office

LST EN 3717-2008 Aerospace series - Tubes - Selection for engines fluid systems

AGMA - American Gear Manufacturers Association

6001-E08-2008 Design and Selection of Components for Enclosed Gear Drives
6001-D97-1997 Design and Selection of Components for Enclosed Gear Drives
6001-C88-1988 Design and Selection of Components for Enclosed Gear Drives

American Gear Manufacturers Association

AGMA 6001-E08-2008 Design and Selection of Components for Enclosed Gear Drives
AGMA 6001-D97-1997 Design and Selection of Components for Enclosed Gear Drives

RU-GOST R

GOST IEC/TR 61912-2-2013 Low-voltage switchgear and controlgear. Overcurrent protective devices. Part 2. Selectivity under over-current condition
GOST R 56737-2015 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Part 3. Polymer insulators for a.c. systems

German Institute for Standardization

DIN EN 3717:2008-12 Aerospace series - Tubes - Selection for engines fluid systems; German and English version EN 3717:2008

VDI - Verein Deutscher Ingenieure

VDI-MT 5110 BLATT 1-2019 Betriebliches Mobilitaetsmanagement - Qualifikationsmerkmale fuer die Auswahl von befaehigten Personen fuer Mobilitaetsmanagement
VDI/VDE 2644-1998 Selection and applicability of flowmeters

IEC - International Electrotechnical Commission

IEC 60281:1969 Magnetic Cores for Application in Coincident Current Matrix Stores Having a Nominal Selection Ratio of 2:1 (Edition 1.0; Supplement A-1973; Amendment 1-1975)
IEC 60287-3-1:1999 Electric Cables - Calculation of the Current Rating - Part 3-1: Sections on Operating Conditions - Reference Operating Conditions and Selection of Cable Type (Edition 1.1 Consolidated Reprint)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3008.1.2:2010 Selection of cables for electrical installations Cables for AC voltages 0.6/1 kV and below Typical New Zealand conditions
AS/NZS 3008.1.2:2017 Electrical installations — Selection of cables, Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV — Typical New Zealand conditions

Japanese Industrial Standards Committee (JISC)

JIS B 8399:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1820-2020 Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions

Spanish Association for Standardization (UNE)

UNE-EN 3717:2008 Aerospace series - Tubes - Selection for engines fluid systems (Endorsed by AENOR in May of 2008.)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-10-1-1998 Selection of Turbulence Models for Prediction of Room Airflow

KR-KS

KS C IEC TS 60815-4-2024 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions — Part 4: Insulators for d.c. systems
KS H ISO 21160-2021 Cigarettes — Determination of selected carbonyls in the mainstream smoke of cigarettes — Method using high performance liquid chromatography

Standard Association of Australia （SAA）

AS 3778.2.5:2001 Measurement of water flow in open channels - General - Guidelines for the selection of flow gauging structures

CU-NC

NC 07-02-1971 Basik rack of cylindrical gears Selection of Modules

Defense Logistics Agency

DLA MIL-HDBK-1861 A CHANGE 3-2010 SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE
DLA MIL-HDBK-1861 A CHANGE 1-2006 SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE
DLA MIL-HDBK-1861 A CHANGE 2-2008 SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE

American National Standards Institute （ANSI)

ANSI/AGMA 6001-E-2008 Design and Selection of Components for Enclosed Gear Drives

U.S. Military Regulations and Norms

ARMY MIL-HDBK-788-1989 SELECTION OF ACOUSTIC EMISSION SENSORS
ARMY MIL-HDBK-788 VALID NOTICE 1-1993 SELECTION OF ACOUSTIC EMISSION SENSORS

GM North America

GM GM6080M-2002 Selection and Use of Copper and Copper Alloy Welding Rod

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3717-1991 Aerospace Series Tubes Selection for Engines Fluid Systems (Issue P 1)

PT-IPQ

NP 2469-1987 Quote the water meter. Relevant installation conditions. Selection criteria

CZ-CSN

CSN OEG 38 0806-1966 Choise of Heavy-currentEguipment in Steam Power Station and Steam Generating Stations according to their Surrounding

International Organization for Standardization (ISO)

ISO 10823:2004 Guidelines for the selection of roller chain drives
ISO 21160:2018 Cigarettes — Determination of selected carbonyls in the mainstream smoke of cigarettes — Method using high performance liquid chromatography
ISO 9142:1990 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 10823:1996 Guidance on the selection of roller chain drives
ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits

European Committee for Standardization (CEN)

PD CEN/TR 15310-1:2006 Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions

US-FCR

FCR AF I21-104-1998 SELECTIVE MANAGEMENT OF SELECTED GAS TURBINE ENGINES

Others: Choice of mobile phase,Selection of normal phase mobile phase,Conditions for choosing mobile phase,Choice of mobile phase conditions,Quick Selection of Mobile Phases,Basis for Mobile Phase Selection