Affect instrument performance

Affect instrument performance, Total:133 items.

The international standard classification for "Affect instrument performance" includes: Geology. Meteorology. Hydrology .

The Chinese standard classification for "Affect instrument performance" includes: Hydrology and water conservancy instrument .

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1442-2017 Operating procedures for weather modification airborne instruments

未注明发布机构

AMPP Paper 17917-2022 Impact of material properties on the performance of thick-wall X65 TMCP plate steel for sour service
AMPP Paper 16274-2021 Effect of MIC on Mechanical Property Degradation of X80 Pipeline Steel

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1577-2017 Environmental Impact Assessment Technical Guidelines Biodiversity Impacts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18522.5-2002 General specification for hydrometric instruments - Part 5: The operating conditions influences and test method

Society of Automotive Engineers (SAE)

SAE J977A_196812 Instrumentation for Laboratory Impact Tests
SAE J977_196611 Instrumentation for Laboratory Impact Tests
SAE AIR4359-1997(R2008) Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR4359A Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR4359 Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR4359-2013 Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR4359A-2016 Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR4359-1997 Effects of Hanging Loads (e.g., GOH) on ULD Performance
SAE AIR1106-1970 SOME FACTORS AFFECTING VISIBILITY OF AIRCRAFT NAVIGATION LIGHTS
SAE AIR5642-2005 The Effect of Installation Power Losses on the Overall Performance of a Helicopter

ESDU - Engineering Sciences Data Unit

TM 19-1976 Effects of truncation on diffuser performance
ESDU 10019-2011 Effect of link length tolerances on the performance of four-bar linkages

American Water Works Association (AWWA)

AWWA ACE69010 The Impact of Fluoride Removal on Filter Performance
AWWA QTC98346 Effects of Chlorine and Chloramine on Biofilter Performance
AWWA JAW71201 Journal AWWA — Effect of Shading on Performance of Slow Sand Filters
AWWA ACE54303 Effects of Filter Backwash Recycle on Treatment Performance
AWWA WQTC50368 Particle Removal Performance: Variance Implications
AWWA JAW6609 Journal AWWA — The Effect of Backwashing Rate on Filter Performance
AWWA ACE58166 Factors Impacting the CFD-Based Modeling of UV Reactor Performance
AWWA MTC53866 Effect of Coagulation on Ultrafiltration Membrane Performance
AWWA MTC53829 Influence of Membrane Morphology on the Performance of Ultrafiltration Membranes
AWWA MTC64643 Comparative Effect of Pretreatment on SWRO Performance
AWWA ACE91086 Effects of Flocculation on Direct Filtration Performance
AWWA WQTC53000 The Impact of Chemical Sequencing on Filtration Performance
AWWA WQTC64061 The Impact of Miex Pretreatment on Granular Activated Carbon Performance
AWWA WQTC65964 Impact of Chemical Cleaning on Properties and Functioning of UF Membranes
AWWA ACE62983 Radio Frequency (RF) Characteristics and Their Impact on AMR System Performance
AWWA ACE70808 Radio Frequency (RF) Characteristics and Their Impact on AMR System Performance
AWWA WQTC60701 Filter Performance: The Effects of ETSW and Preoxidation with Optimal and Suboptimal Coagulation
AWWA ACE95072 The Influence of Natural Organic Matter (NOM) Hydrophobicity on Nanofiltration Performance
AWWA 51854 Impact of Backwash Recycling on Water Treatment Plant Performance
AWWA WQTC64013 Impact of pH During Flocculation on Downstream Membrane Performance
AWWA JAW46233 Journal AWWA — DAF Pretreatment: Its Effect on MF Performance
AWWA WQTC62445 Strategies to Minimize Bias That Can Adversely Affect Filter Performance Studies
AWWA MTC57584 Rheology of Activated Sludge in Membrane Bioreactors and its Impact on Energy Requirements
AWWA ACE63183 Assessing Temperature Influences on Slow Sand Filtration Treatment Performance

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-10-037-2010 Effect of Dents in Condenser Fins on Air-Conditioner Performance
ASHRAE 3886-1995 Effect of Coolant Flow Conditions on the Performance of an Absorber
ASHRAE NA-04-5-2-2004 "Measured Performance and Impacts of ""Drop-In"" Residential Heat Pump Water Heaters"
ASHRAE TO-98-9-1-1998 Effect of Airflow Nonuniformity on Evaporation Performance
ASHRAE SE-99-02-02-1999 Impact of Forecasting Uncertainty on the Performance of a Predictive Optimal Controller for Thermal Energy Storage Systems
ASHRAE CH-06-8-2-2006 Effercts of Appliance Diversity and Position on Commercial Kitchen Hood Performance
ASHRAE CH-03-6-1-2003 A Duct Performence Model That Includes the Effects of Leakage
ASHRAE SF-98-23-2-1998 Effect of Sizing Mismatch on Coil Valve Performance
ASHRAE 3960-1996 Impact of the Suction Line Accumulator on the Frost/Defrost Performance of an Air-Source Heat Pump with a Scroll Compressor
ASHRAE OR-05-1-3-2005 Impact of Fouling and Cleaning onn Plate Fin and Spine Fin Heat Exchangers Performance
ASHRAE LO-09-040-2009 Aerodynamic Performance and System Effects of Propeller Fans
ASHRAE OR-16-C058-2016 The Impact of a Heat Pump Water Heater on the Energy Consumption of a Single Detached House
ASHRAE 4398-2000 Impact of Temperature Control Approaches on the Thermal Performance of Household Refrigerator
ASHRAE SA-96-12-3-1996 Effect of Variable Flow on Centrifugal Chiller Performance
ASHRAE AN-04-5-2004 Symposium on Factors Influencing the Energy Performance of Forced-Air Systems
ASHRAE SF-98-30-2-1998 Impact of Blower Performance on Residential Forced-Air Heating System Performance
ASHRAE 4325-2000 Parametric Analysis of Variables That Affect the Performance of a Desiccant Dehumidification System
ASHRAE CI-01-4-2-2001 Effect of Successively Variable Louver Angle on the Air-Side Performance of Fin-and-Tube Heat Exchangers
ASHRAE AC-02-16-3-2002 Effects of Commercial Kitchen Pressure on Exhaust System Performance
ASHRAE BN-97-14-1-1997 Study of How Sash Movement Affects Performance of Fume Hoods

National Association of Corrosion Engineers (NACE)

NACE Paper 11132-2018 Study on the influence of dissolved salt concentration on the performance of offshore coating systems
NACE Paper 13218-2019 Study on the influence of dissolved salt on coating performance
NACE Paper 07562-2016 Analysis of factors affecting the performance of composite repair system
NACE Paper 12976-2019 Effect of Iron and Steel Metallurgy on Corrosion Inhibitor Performance
NACE Paper 11067-2018 The Performance Effect of Coating Rusty Steel with an Epoxy-Phenalkamine Coating
NACE Paper 12830-2019 Effect of Steel Surface Roughness on FBE Coating Performance

American Society for Testing and Materials (ASTM)

ASTM STP 956-1987 Effects of radiation on material properties
ASTM STP 95-1949 Effects of radiation on material properties
ASTM D7316-14 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
ASTM STP 391-1965 Literature Survey on the Effect of Temperature on the Properties of Metals
ASTM D471-98e2 Standard Test Method for Rubber Property-Effect of Liquids
ASTM RR-D11-1004 1974 D0471-Test Method for Rubber Property—Effect of Liquids
ASTM RR-D11-1069 1994 D0471-Test Method for Rubber Property—Effect of Liquids
ASTM STP 611-1976 Effects of irradiation on metal microstructure and properties
ASTM D471-16a(2021) Standard Test Method for Rubber Property—Effect of Liquids
ASTM D471-12 Standard Test Method for Rubber Propertymdash;Effect of Liquids
ASTM D471-06e1 Standard Test Method for Rubber Property x2014; Effect of Liquids
ASTM STP 418-1967 Effect of Residual Elements on Properties of Austenitic Stainless Steel
ASTM D471-12a Standard Test Method for Rubber Propertymdash;Effect of Liquids
ASTM D471-06 Standard Test Method for Rubber Property-Effect of Liquids
ASTM D471-15a Standard Test Method for Rubber Property&x2014Effect of Liquids
ASTM D471-15 Standard Test Method for Rubber Property&x2014Effect of Liquids
ASTM D7316-06 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions

Association of German Mechanical Engineers

VDI 4552-2019 Reduction of the effects of shocks of individual and periodically recurring shocks on vibratory systems

Gosstandart of Russia

GOST 25804.3-1983 Atomic power station technological processes control system equipment. Durability, endurance, resistance requirements for hignest influental factor
GOST R 51368-2011 Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 51371-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
GOST R 51369-1999 Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 52562-2006 Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for water influence
GOST R 51370-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST 25804.7-1983 Atomic power station technological processes control system equipment. Evaluation methods of meeting durability, endurance and resistance requirements for highest influental factors

GB-REG

REG NASA-LLIS-0322-1993 Lessons Learned - Radiation, Effect on Windows and Optical Instruments

American Petroleum Institute (API)

API REPORT 88-25-1989 The Effect of Toughness on Tubular Good Service Performance
API REPORT 87-36-1988 Further Effects of Stress on Penetration and Flow Performance of Jet Perforators
API REPORT 89-25-1990 Phase II - The Effect of Toughness on Tubular Good Service Performances
API PUBL 4467-1988 Effect of Lower RVP Fuels on Cold-Start Driveability

International Commission on Illumination (CIE)

CIE 214:2014 Effect of Instrumental Bandpass Function and Measurement Interval on Spectral Quantities
CIE 214-2014 Effect of Instrumental Bandpass Function and Measurement Interval on Spectral Quantities

American Concrete Institute

ACI SP-91 Effect of fly ash on the physical properties of concrete

International Telecommunication Union (ITU)

ITU-T L SUPP 24-2016 ITU-T L.1500 - Overview of climate change effects and possible impacts

Swedish Institute for Standards

SS 24300-3:2014 Energy performance of buildings - Part 3: Classification of environmental impact
SS 24300-3:2020 Energy performance of buildings - Part 3: Classification of environmental impact

GCC Standardization Organization

GSO 1109:2002 TEST METHOD FOR THE EFFECT OF LIQUIDS ON RUBBER PROPERTIES

Korean Agency for Technology and Standards (KATS)

KS B ISO 9767-2002 Photography－Overhead projectors－Method for measuring andreporting performance characteristics
KS B ISO 9767:2002 Photography－Overhead projectors－Method for measuring andreporting performance characteristics
KS B ISO 9767:2007 Photography－Overhead projectors－Method for measuring andreporting performance characteristics
KS C 1609-2008 Compensating lead wires

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-468-1979 Factors Affecting Insulation Resistance Performance of Printed Boards

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 1109:2002 TEST METHOD FOR THE EFFECT OF LIQUIDS ON RUBBER PROPERTIES

Association Francaise de Normalisation

A36-200:1982 Influence of post-welding heat treatment on steels for boilers and presure vessels mechanical properties.
NF A36-200:1982 Influence des traitements thermiques après soudage sur les propriétés mécaniques des aciers pour chaudières et appareils à pression

Bureau of Indian Standards

IS 15484-2004 Photography - Overhead Projectors - Methods for Measuring and Reporting Performance Characteristics

Ente Nazionale Italiano di Unificazione

UNI/TR 11469:2012 Acoustic - Extensibility of sound reduction index for building
UNI EN ISO 10938:1998 Ophthalmic instruments - Chart projectors.

American Gear Manufacturers Association

AGMA 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior
AGMA 95FTM14-1995 Study of Effect of Machining Parameters on Performance of Worm Gears
AGMA 95FTM14 Study of Effect of Machining Parameters on Performance of Worm Gears
AGMA 99FTM14 Effect of Material Defects on Gear Performance - a Case Study

American Welding Society (AWS)

WRC 231:1977 Factors Affecting Weld Metal Properties in Carbon and Low Alloy Pressure Vessel Steels

WRC - Welding Research Council

BULLETIN 231-1977 FACTORS AFFECTING WELD METAL PROPERTIES IN CARBON AND LOW ALLOY PRESSURE VESSEL STEELS
BULLETIN 206-1975 EFFECTS OF POROSITY ON THE FATIGUE PROPERTIES OF 5083 ALUMINUM ALLOY WELDMENTS

ECIA - Electronic Components Industry Association

EIA CB-4:1965 Effect of the Wire Diameter on Wirewound Resistors Reliability

AGMA - American Gear Manufacturers Association

99FTM14-1999 Effect of Material Defects on Gear Performance - a Case Study
95FTM14-1995 Study of Effect of Machining Parameters on Performance of Worm Gears

German Institute for Standardization

DIN 68861-1:2011 Furniture surfaces - Part 1: Behaviour at chemical influence

British Standards Institution (BSI)

PD CEN/TS 16786:2018 Road restraint systems - Truck Mounted Attenuators - Performance classes@ impact test acceptance criteria and test performance

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

SERIES L SUPP 24-2016 ITU-T L.1500 – Overview of climate change effects and possible impacts (Study Group 5)

European Committee for Standardization (CEN)

EN ISO 10938:2016 Ophthalmic optics - Chart displays for visual acuity measurement - Printed@ projected and electronic

Danish Standards Foundation

DS/EN ISO 10938:1999 Ophthalmic instruments - Chart projectors

International Organization for Standardization (ISO)

ISO 10938:2016 Ophthalmic optics - Chart displays for visual acuity measurement - Printed, projected and electronic
ISO 10938:1998 Ophthalmic instruments - Chart projectors