resolution operation

resolution operation, Total:235 items.

The international standard classification for "resolution operation" includes: Photographic equipment. Projectors , Safety of machinery , Industrial automation systems in general , Non-destructive testing , Networking , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "resolution operation" includes: Chemical Measurement , Length Measurement , Mechanics Measurement , Optical Measurement , Thermal Measurement , Ionizating Radiation Measurement , Electromagnetic Measurement , Camera and photograph instrument , Hygiene, safety and labor protection , Technical management , Basic standards and general methods , Opening and system interconnection of computer , Petroleum drilling , Data communication equipment .

Group Standards of the People's Republic of China

T/CAMS 128-2023 Distributed Industrial Internet Identity Resolution System——Reliable and Controllable Operating Procedures for Identification Service
T/QGCML 1003-2023 Electrolytic pole change operating procedures
T/QGCML 1005-2023 Operating procedures for electrolysis stop-start tank non-power-off device
T/SHZSAQS 00119-2022 Leeb Hardness Tester Operating Technical Regulations
T/SXCAA 035-2023 Flame Photometer Periodic Verification Operating Procedures
T/DALN 019-2021 Standardized operation and management system for drinking milk for students
T/CAMS 129-2023 Distributed Industrial Internet Identity Resolution System——Reliable and Controllable Operating Procedures for Identification Service

Jilin Provincial Standard of the People's Republic of China

DB22/T 3036-2019 Poultry pathological anatomy operating procedures

Professional Standard - Judicatory

SF/Z JD0101003-2015 Operating Procedures for Forensic Virtual Autopsy

Beijing Provincial Standard of the People's Republic of China

DB11/ 533-2008 Technical criterion for end-of-life vehicles take-back and dismantling

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 1481-2021 Specifications for the technical operation of tendon-manipulative release

National Metrological Technical Specifications of the People's Republic of China

JJF 1244-1990 O.T.N.of Secondary Standard of Brinell Hardness
JJF 1214-1990 O.T.N.of Taper Primary Standard for Circle Taper Gauge
JJF 1243-1990 O.T.N. of the Primary Standard for the Brinell Hardness
JJF 1219-1990 O.T.N.of Temperature Primary Standard in the Range from 273.15 to 903.89K
JJF 1314-1990 O.T.N. of Primary Standard for Illuminoation
JJF 1220-1990 O.T.N.of Temperature Primary Standard in the Range from 903.89 to 1337.58K
JJF 1211-1990 O.T.N.of Flatness Primary Standard
JJF 1311A-1990 O.T.N. of Photometric Secondary Standard(A)
JJF 1259-1990 O.T.N. of the Secondary Standard for the Density(Alcoholometer)
JJF 1250-1990 O.T.N. of the Hardness Secondary Standard for Vickers
JJF 1251-1990 O.T.C. of Hardness Primary Standard for Shore
JJF 1369-1995 Operating technical norm angle primary standard (angle betten two lines)
JJF 1210-1990 O.T.N of Sourface Roughness Standard
JJF 1216-1990 O.T.N.of Temperature Primary Standard in the Range from 90.188 to 273.15K
JJF 1317-1990 Operating Technical Norm of Primary Standart for Luminance
JJF 1245-1990 O.T.N. of Rockwell Hardness Primary Standard
JJF 1323-1990 O.T.N. of Chromaticity Primary Standard
JJF 1319-1990 O.T.N. of Colour Temperature Primary Standard
JJF 1208-1990 O.T.N.of Angle Divding Table Primary Standard
JJF 1358-1990 O.T.N. for Primary Standard Chemicals
JJF 1249-1990 O.T.N. of the Primary Standard for the Vickers Hardness
JJF 1310-1990 O.T.N. of Primary Standard for Photometry
JJF 1252-1990 O.T.C. of the Primary Standard for the Micro-hardness
JJF 1320-1990 O.T.N. for Secondary Standard of Distribution(Colour) Temperature of Light Sources
JJF 1355-1990 O.T.N. for Humidity Primary Standard
JJF 1246-1990 O.T.N. of the Secondary Standard for the Rockwell Hardness
JJF 1315-1990 O.T.N. of Secondary Standard for Illumination
JJF 1218-1990 O.T.N.of Temperature Primary Standard in the Range from 273.15 to 903.89K
JJF 1253-1990 O.T.N. of the Primary Standard for International Rubber Hardness Degree
JJF 1357-1990 O.T.N. for Primary Standard of Electrolytic Conductivity
JJF 1356-1990 O.T.N. for pH Primary Standard
JJF 1318-1990 Operating Technical Norm of Luminance Secondary Standard
JJF 1294-1990 O.T.N. for Primary Standard of Magnetic Induction
JJF 1362-1994 Operating technical norm of vertex power primary standard of measurement
JJF 1334-1990 O.T.N. of Specular Gloss Primary Standard
JJF 1338-1990 O.T.N. of 4πβ(LS) Radioactivity Primary Standard
JJF 1311C-1990 O.T.N. of Secondary Standard for Luminous Intensity(C)
JJF 1354-1990 O.T.N. of Primary Standard of Viscosity
JJF 1207-1990 O.T.N.of limb Tester Primary Standard
JJF 1349-1990 O.T.N. of Primary Standard for Neutron Source Strength
JJF 1221-1990 O.T.N.of Temperature Secondary Primary Standard in the Range from 903.89 to 1337.58K
JJF 1311B-1990 O.T.N. for Secondary Standard for Luminous Intensity

Professional Standard - Meteorology

QX/T 643-2022 Operating specifications for meteorological water electrolysis hydrogen production equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13985-2008 Operating force and strength of camera
GB/T 43601-2024 Mobile elevating work platforms—Operator's controls—Actuation, displacement, location and method of operation
GB 18209.3-2002 Safety of machinery-Indication,marking and actuation-Part 3:Requirements for the locatoin and operation of actuators
GB/T 41782.4-2024 Internet of things—Interoperability for systems—Part 4: Syntactic interoperability
GB/T 40283.3-2021 Automation systems and integration—Interoperability of capability units for manufacturing application solutions—Part 3:Verification and validation of interoperability among capability units
GB/T 13985-1992 Operating force and strength of camera
GB/T 41123.2-2021 Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2732-2023 Operating procedures for characteristic acupuncture
DB14/T 2134-2020 Operating Procedures for Elevator Speed Governor Action Speed Calibration

Professional Standard - Petroleum

SY/T 6427-1999 Recommended practice for drill stem design and Operating limits

未注明发布机构

FORD U-HTX-8000-1990 SALT BATH MOLTEN - SAFETY PRECAUTIONS IN OPERATION OF SCOPE AND AIM
Interoperability Maturity Roadmap IEEE Std 2030.5(2019) Interoperability Maturity Roadmap

Professional Standard - Electron

SJ 20856-2002 Requirements of interoperability and performance for HF single-tone modem

Zhejiang Provincial Standard of the People's Republic of China

DB3305/T 258-2023 Pre-hospital medical emergency dispatch operation specification

Qinghai Provincial Standard of the People's Republic of China

DB63/T 1709-2018 Technical operating procedures for rapid cryopreservation and thawing of yak embryos

Guizhou Provincial Standard of the People's Republic of China

DB5201/T 142.3-2024 Field test procedure for purity of variety Part 3: Pepper
DB5201/T 142.1-2024 Field test procedure for purity of varieties Part 1: Chinese cabbage
DB5201/T 142.4-2024 Field test procedure for purity of varieties Part 4: Radish
DB5201/T 142.2-2024 Field purity test procedures Part 2: Cabbage

Professional Standard - Medicine

YY/T 0188.11-1995 Operating methods for the tests and assays of drugs Part11:Tests for the clarity of solutions
YY/T 0188.10-1995 Operating methods for the tests and assays of drugs Part 10:Methods of the dissolution test and the drug release for the preparations

Military Standard of the People's Republic of China-General Armament Department

GJB 2258-1994 ship work breakdown structure
GJB 5427-2005 Technical rules for disposing the abandoned general ammunition

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1638-2019 Tan sheep purity PCR-mtDNA identification technology operating procedures

(U.S.) Telecommunications Industries Association

TIA-895-A-2002 CDMA Tandem Free Operation

American Water Works Association (AWWA)

AWWA JTMGT69633 Resolving Treatment Plant Operator Work Scheduling Issues through a Labor/Management Process
AWWA ACE94088 The Use of Temperature as a Ground Water Operational Tool
AWWA C671-2021 OnlineTurbidimeter Operation and Maintenance
AWWA C671-2016 OnlineTurbidimeter Operation and Maintenance
AWWA DSS63740 Operation and Modeling Approaches for Addressing Water Quality Problems in the Distribution System
AWWA ACE65574 Operational Mitigation Strategies to Deal with Arsenic Leaching during Adsorption Treatment

Military Standards (MIL-STD)

DOD MIL-STD-188-165 A VALID NOTICE 1-2013 Interoperability of SHF Satellite Communications PSK Modems (FDMA Operation)
MIL MIL-STD-188/110C-2011 Interoperability and Performance Standards for Data Modems
DOD A-A-51009-1985 CAUTERY, OPHTHALMIC, BATTERY-OPERATED, LOW TEMPERATURE

Magyar Szabványügyi Testület

MSZ 11596-1983 Resolution (2) Mineral water, analytical function

Indonesia Standards

SNI 04-2233-1991 High fidelity audio amplifiers, Minimum performance requirement
SNI 03-1732-1989 Thickness of flexible hardening of highways by component analysis method, Code of practice

Czech Standards Institute (UNMZ)

CSN 34 3107-1970 Safety regulations for operations and work at fusion and solution elektrolysis
CSN ON 73 5111-1967 Design Value of Relative Humidity and Temperature for Textile Operations
CSN OIV 73 6958-1968 Control and Operating Schedule for Irrígation System

European Telecommunications Standards Institute (ETSI)

ETSI TR 102 659-2 V1.2.1 (2009-10)-2009 GRID; Study of ICT Grid interoperability gaps; Part 2: Interoperability Gaps and proposed solutions
TR 102 766-2009 GRID; ICT Grid Interoperability Testing Framework and survey of existing ICT Grid interoperability solutions (V1.1.1)
ETSI TR 102 766 V1.1.1 (2009-10)-2009 GRID; ICT Grid Interoperability Testing Framework and survey of existing ICT Grid interoperability solutions

Bureau of Indian Standards

IS 7739 Pt.2-1975 Metallographic Specimen Preparation Procedure Part Ⅱ Electropolishing
IS 7739-2-1975 Code of Practice for Preparation of Metallographic Specimens - Part 2 Electrolytic polishing
IS 8433-1984 Operating Procedures for Visual Inspection of Dissolved Acetylene Cylinders
IS 16271-2014 Dissolved Acetylene Gas Cylinders - Inspection at Time of Filling - Code of Practice
IS 8198 Pt.4-1984 Code of Practice for Compressed Gas Cylinders Part 4 Dissolved Acetylene Gas
IS 10596 Pt.3-1983 Code of Practice for Selection, Installation, Operation and Maintenance of Pumps for Industrial Applications Part 3 Operations
IS 9694 Pt.3-1980 Code of practice for the selection, installation, operation and maintenance of horizontal centrifugal pumps for agricultural use Part III Operation
IS 9694-3-2023 Selection, Installation, Operation And Maintenance Of Horizontal Centrifugal Pumps For Agriculture Application —— Code Of Practice Part 3 Operation

Yugoslav Association for Standardization

JUS N.K5.011-1979 Low-voltage controlgear. Contactors. Information to begiven by the userwhen conditions for operation in service differ from the standard

American Society for Testing and Materials (ASTM)

ASTM E1877-11 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM C1346-08(2014) Standard Practice for Dissolution of UF 6 from P-10 Tubes
ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
ASTM D3452-06(2021) Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D3452-06 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D5513-99 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM C1269-97(2012) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
ASTM C126-14 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
ASTM D5513-99(2004) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D7569-10 Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method
ASTM E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1079-00 Standard Practice for Calibration of Transmission Densitometers
ASTM D6094-97(2004) Standard Guide to Assess the Compostability of Environmentally Degradable Nonwoven Fabrics
ASTM D2555-06(2011) Standard Practice for Establishing Clear Wood Strength Values

Aeronautical Radio Inc.

ARINC 407-1 PART 6-1961 Recommended Practice - Resolver System Standardization

American Petroleum Institute (API)

API PUBL 1625-1979 Analysis of Temperature Effects on Gasoline Marketing Operations
API Publ 1625-1978(1979) Analysis of Temperature Effects on Gasoline Marketing Operations
ANSI/API RP 17M:2004(2009) Recommended Practice on Remotely Operated Tool (ROT) Intervention Systems

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A108C-2005 Temperature, Bias, and Operating Life

American National Standards Institute （ANSI)

ANSI/AWWA C671-2021 Online Turbidimeter Operation and Maintenance
ANSI/ASTM E1169:2013 Practice for Conducting Ruggedness Tests
ANSI/ASTM E1169a:2013 Practice for Conducting Ruggedness Tests

Comitato Elettrotecnico Italiano

CEI EN 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions

Canadian Standards Association (CSA)

CSA M665.2-95-CAN/CSA-1995 Commandes De L碠perateur D碪ne Machine Agricole - Forces De Manoeuvre Fiche No 1

British Standards Institution (BSI)

BS IEC 62481-4:2017(2019) Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4 : DRM interoperability solutions
BS IEC 62481-4:2017 Digital living network alliance (DLNA) home networked device interoperability guidelines - DRM interoperability solutions
BS EN 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. DRM interoperability solutions (TA9)
24/30477197 DC Non-destructive testing — Radiation methods for computed tomography - Part 3: Operation and interpretation
BS EN 1991-1-6:2005/NA:2008 Eurocode 1 : Actions on structures – Part 1 - 6 : General actions – Actions during execution Introduction
BS EN 1991-1-6:2005(2013) Eurocode 1 — Actions on structures Part 1 - 6 : General actions — Actions during execution
BS 6375-2:1987 Performance of windows - Specification for operation and strength characteristics
BS EN 15928:2010 Fertilizers. Determination of the fineness of grinding (dry procedure)
BS EN ISO /IEEE 11073-40102:2022 Health informatics. Device interoperability-Foundational. Cybersecurity. Capabilities for mitigation
BS EN ISO/IEEE 11073-40102:2022 Health informatics. Device interoperability - Foundational. Cybersecurity. Capabilities for mitigation

International Electrotechnical Commission (IEC)

IEC 62481-4:2017 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions
IEC 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions (TA 9)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE-Schriftenreihe Band 013:2017 Operation of electrical installations - Interpretation of DIN VDE 0105-100:2015-10

Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V. (DWA)

DWA-Arbeitsbericht KA-6-3:2007-06 Guide for Identification and Resolution of Operational Problems in Trickling Filters, Rotating Biological Contactor and Submerged Fixed-Bed Systems

Association Francaise de Normalisation

NF C90-801-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4 : DRM interoperability solutions (TA9)
NF U09-020:1979 AGRICULTURAL EQUIPMENT. HOPPERS. MANUAL LOADING HEIGHT.
NF EN ISO 15708-3:2019 Non-destructive testing - Radiation methods for computerized tomography - Part 3: operation and interpretation
NF EN 1991-1-6/NA:2009 Eurocode 1 - Actions on structures - Part 1-6: general actions - Actions in progress - National annex of NF EN 1991-1-6:2005 - General actions - Actions in progress
NF T01-041:1975 Atomic absorption spectroscopy. General approach to practice.
NF U42-155*NF EN 15928:2010 Fertilizers - Determination of the fineness of grinding (dry procedure)
NF P06-116-1/NA*NF EN 1991-1-6/NA:2009 Eurocode 1 - Actions on structures - Part 1-6 : general actions - Actions during execution - National annex to NF EN 1991-1-6:2005 - General actions - Actions during execution
NF E10-113-2*NF EN ISO 12181-2:2011 Geometrical product specifications (GPS) - Roundness - Part 2 : specification operators
NF EN 1991-1-6:2005 Eurocode 1 - Actions on structures - Part 1-6: General actions - Actions during execution

European Committee for Electrotechnical Standardization（CENELEC）

EN 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions (TA9)

Standard Association of Australia （SAA）

AS 2708:2001 Keyboarding speed tests (formerly known as - Typing speed tests)
AS 4691.2:2023 Laser speed detection devices, Part 2: Operational procedures

German Institute for Standardization

DIN 87350:2017-03 Remote handling tubes for manual operation - Angle drive units, slewable
DIN EN 62481-4 E:2013-02 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions
DIN 55303-2 Beiblatt 1:1984 Operating characteristics of data interpretation tests in statistical inference
DIN EN 12300:1999 Cryo container – purity for cryogenic operation DIN
DIN EN 16016-3:2012-12 Non destructive testing - Radiation methods - Computed tomography - Part 3: Operation and interpretation
DIN EN 16016-3:2012-01 Non destructive testing - Radiation methods - Computed tomography - Part 3: Operation and interpretation
DIN EN 62481-4 E:2013 Draft Document - Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions (IEC 100/1995/CDV:2012); English version FprEN 62481-4:2012
DIN EN ISO 15708-3:2019-09 Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017); German version EN ISO 15708-3:2019
DIN EN 1991-1-6:2010-12 Eurocode 1: Actions on structures - Part 1-6: General actions, Actions during execution; German version EN 1991-1-6:2005 + AC:2008
DIN EN 1991-1-6 Berichtigung 1:2013-08 Eurocode 1: Actions on structures - Part 1-6: General actions, Actions during execution; German version EN 1991-1-6:2005, Corrigendum to DIN EN 1991-1-6:2010-12; German version EN 1991-1-6:2005/AC:2012
DIN 6876 Beiblatt 1:2023-10 Operation of medical magnetic resonance systems; Supplement 1: General explanations and rationales
DIN 87352:2017-03 Remote handling tubes for manual operation - Protective cover for angle drive units, slewable
DIN 87352 E:2016-05 Remote handling tubes for manual operation - Protective cover for angle drive units, slewable
DIN EN 16016-3 E:2009 Draft Document - Non destructive testing - Radiation Methods - Computed Tomography - Part 3: Operation and interpretation; German version prEN 16016-3:2009

Danish Standards Foundation

DANSK DS/EN 62481-4:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions (TA9)
DS/EN 16016-3:2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
DANSK DS/EN 16016-3:2011 Non destructive testing – Radiation methods – Computed Tomography – Part 3: Operation and interpretation
DANSK DS/EN 1991-1-6:2007 Eurocode 1 - Actions on structures - Part 1-6: General actions - Actions during execution
DANSK DS/ISO/IEEE 11073-40102:2022 Health informatics – Device interoperability – Part 40102 Foundational – Cybersecurity – Capabilities for mitigation
DANSK DS/EN 1991-1-6/AC:2007 Eurocode 1 - Actions on structures - Part 1-6: General actions - Actions during execution

U.S. Air Force

AIR FORCE MIL-STD-188-110 C-2011 INTEROPERABILITY AND PERFORMANCE STANDARDS FOR DATA MODEMS

Ente Nazionale Italiano di Unificazione

UNI 7913:1978 Operated instruments for gripping and manipulation. Special flat bent at 90 degrees noses plier.
UNI EN ISO 15708-3:2019 Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation
UNI ISO/TS 12180-2:2006 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators
UNI ISO/TS 12780-2:2006 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators

Swedish Institute for Standards

SS-EN ISO 8655-9:2022 Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO 8655-9:2022)
SIS SS IEC 654-1:1982 Process control — Operating conditions — Temperature, humidity and barometric pressure

US Federal Contractor Registration (USFCR)

FCR UFGS-10 22 26-2006 OPERABLE PARTITIONS

Korean Agency for Technology and Standards (KATS)

KS W 0646-2013 Airplane strength and rigidity, flight ground operation tests
KS B 7068-2002 Test code for accuracy of X-Y table for control position
KS B ISO 12181-2-2014(2019) Geometrical product specifications(GPS) — Roundness — Part 2: Specification operators
KS W 0618-1984(2011) AIRPLANE STRENGTH AND RIGIDITY LANDING AND GROUND HANDLING LOADS
KS W 0619-1981 Airplane strength and rigidify, water and handling loads for seaplanes
KS W 0646-1994 Airplane strength and rigidity,flight ground operation tests
KS B 4041-2002(2011) Test code for performance and accuracy of turret lathes
KS B 4041-1986 Test code for performance and accuracy of turret lathes
KS W 0618-1984 Airplane Strength and Rigidity, Landing and Ground Handling Loads
KS B ISO 12180-2-2014(2019) Geometrical product specifications(GPS) — Cylindricity — Part 2: Specification operators
KS B ISO 10263-3-2012(2017) Earth-moving machinery－Operator enclosure environment－ Part 3：Operator enclosure pressurization
KS B ISO 12781-2-2014(2019) Geometrical product specifications(GPS) — Flatness — Part 2: Specification operators

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 640-2005 Performance Rating of Commercial and Industrial Humidifiers

GB-REG

REG NASA-LLIS-1194-2001 Lessons Learned — Understanding Lightning Protection Policies during ELV Launch Operations
REG 46 CFR PART 131-2011 OPERATIONS
REG 46 CFR PART 109-2011 OPERATIONS
REG 46 CFR PART 109-2010 OPERATIONS

Gosstandart of Russia

GOST R 53633.4-2015 Information technologies. Telecommunications management network. Enhanced Telecom Operations Map (eTOM). Process decompositions and descriptions. eTOM level 2 processes.Operations. Service management and operations

International Organization for Standardization (ISO)

ISO/CD 15708-3:2023 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
ISO/IEEE 11073-40102:2022 Health informatics — Device interoperability — Part 40102: Foundational — Cybersecurity — Capabilities for mitigation
ISO 15708-3:2025 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation

Spanish Association for Standardization (UNE)

AENOR UNE-EN 16016-3:2012 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
UNE-EN 16016-3:2012 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
UNE-EN ISO 15708-3:2020 Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017)
UNE-EN 1991-1-6:2010 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
UNE-EN 1991-1-6:2018 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution.
UNE-EN ISO/IEEE 11073-40102:2022 Health informatics - Device interoperability - Part 40102: Foundational - Cybersecurity - Capabilities for mitigation (ISO/IEEE 11073-40102:2022) (Endorsed by Asociación Española de Normalización in May of 2022.)

GCC Standardization Organization

GSO IEC 61310-2:2014 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
GSO ISO 15708-3:2021 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
GSO IEC 62391-2:2014 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 15708-3:2022 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation

Lithuanian Standards Office

LST EN 16016-3-2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
LST EN 1991-1-6-2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
LST EN 1991-1-6-2005/AC-2013-04 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution

Aerospace Industries Association/ANSI Aerospace Standards

NASM22978-2000 Fastener@ Rotary@ Quick-Operating@ High-Strength
NAS547-1992 Fastener; Rotary@ Quick- Operating High Strength (Rev 4)
AIA/NAS NASM22978-2000 Fastener, Rotary, Quick-Operating, High-Strength

South African Bureau of Standard

NRS 040-6-2007 High-voltage operating instructions Part 6: Code of practice for earthing

Standards Norway

NS-EN 16016-3:2011 Non destructive testing — Radiation methods — Computed Tomography — Part 3: Operation and interpretation
NS-EN 1991-1-6:2005 Eurocode 1 — Actions on structures Part 1-6: General actions — Actions during execution

Institute of Electrical and Electronics Engineers (IEEE)

Interoperability Maturity Roadmap--IEEE Std 2030.5 Interoperability Maturity Roadmap--IEEE Std 2030.5

Society of Automotive Engineers (SAE)

SAE AIR6411 Effects of Extremely Cold Temperature on Landing Gear Operation
SAE AIR6411-2022 Effects of Extremely Cold Temperature on Landing Gear Operation

Deutsche Vereinigung des Gas- und Wasserfachs

DVGW G 465-4-B1:2006-04 Gas concentration measuring devices with case-specific menu guidance

European Committee for Standardization (CEN)

EN 15928:2010 Fertilizers - Determination of the fineness of grinding (dry procedure)
EN 16016-3:2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
DD ENV 1991-2-6-1997 Eurocode 1: Basis of Design and Actions on Structures - Part 2.6: Actions on Structures - Actions During Execution

Aerospace Industries Association

AIA NASM22978-2000 Fastener, Rotary, Quick-Operating, High-Strength FSC 5325

Belgian Standards Institute

NBN A 11-405-1982 Metallurgical products. Operation of Vickers Hardness Testing Machine
NBN A 11-406-1982 Metallurgical products. Operation of Brinell Hardness Testing Machine

U.S. Department of Transportation (DOT)

DOT 46 CFR PT 97-2008 OPERATIONS