no heat up

no heat up, Total:163 items.

The international standard classification for "no heat up" includes: Protection against dangerous goods , Boring and milling machines , Lamp caps and holders , Transformers. Reactors , Lifts. Escalators , Refractories , Therapy equipment , Photographic equipment. Projectors , Heat-treatable steels , Paints and varnishes .

The Chinese standard classification for "no heat up" includes: Marking, packaging, transport and storage in general , Drilling, boring and milling machine , Lamp accessories , Transformer , Elevator , Fireproof material in general , Electric lighting in general , Projector and slide projector , Steel and iron products in general , Coating .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 1094.2-1996 Power transformers - Part 2: Temperature rise
GB 3932-1983 Milling machines with table of fixed height with horizontal or vertical spindle—Testing of the accuracy
GB/T 21627-2008 Dangerous goods - Slow cook-off test of extremely insensitive detonating substance
GB 1094.2-1985 Power transformers--Part 2: Temperature rise
GB/T 24806-2009 Stairlifts for persons with impaired mobility
GB/T 5989-2008 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
GB/T 3932-1983 Milling machines with table of fixed height with horizontal or vertical spindle; Testing of the accuracy
GB/T 44187-2024 Dangerous goods—Test method of slow cook-off test for extremely insensitive articles without a mass explosion hazard (1.6 article)
GB/T 24392-2009 Standard method of measurement of lamp cap temperature rise
GB/T 5989-2023 Refractory products—Determination of refractoriness under load(differential method with rising temperature)
GB 24806-2009 Stairlifts for persons with impaired mobility

Group Standards of the People's Republic of China

T/CAMA 13-2019 Electric lifting equipment for greenhouse
T/HBJLXH 008-2023 Calibration method of temperature rise testing machine
T/ZZB 0186-2017 Thermo-responsive Stainless steel nonstick wok

Professional Standard - Light Industry

QB/T 2512-2001 Methods of measurement for lamp cap temperature rise

Professional Standard - Railway

TB/T 1424-1982 Temperature rise of communication signal products

工业和信息化部

JC/T 2608-2021 Concrete temperature rise inhibitor
HG/T 5335-2018 Determination of temperature rise for molecular sieve

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 4324-2020 Level of warming process of snowmelt flood

Professional Standard - Medicine

YY/T 0998-2015 Semiconductor heating and/or cooling therapy equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 12323-1988 Stainless Steel Thermal Cup
CNS 10905-1994 Method of Test for Temperature Rise of Lamp Socket

Professional Standard - Machinery

JB/T 6838-2007 Slide Projectors-Determination of temperature rise in the picture area
JB/T 6838-1993 Test method for slide gate temperature rise

Professional Standard - Commodity Inspection

SN/T 3610-2013 Test method to determine temperature rise of electric toys

Professional Standard - Ferrous Metallurgy

YB 4022-1991 Test method for load softening temperature of refractory mud (differential-temperature rise method)
YB/T 4024-1991 Test method for refractoriness under load of refractory mortars
YB 4024-1991 Test method for softening temperature of refractory mud under load (heating method)

Jiangsu Provincial Standard of the People's Republic of China

DB3212/T 2045-2018 Guidelines for Transformation and Upgrading of the Stainless Steel Industry

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38884-2020 High temperature stainless steels for bearing

Professional Standard - Chemical Industry

HG/T 4562-2013 Irreversible Temperature Indicating Coatings

American Society of Mechanical Engineers (ASME)

ASME 2224-1-2001 Use of 304L Stainless Steel at Elevated Temperatures Section VIII, Division 1
ASME B56.11.5-1992 Measurements of sound emitted by low lift, high lift, and rough terrain powered industrial trucks
ASME B56.11.5-1992(R2000) Measurements of sound emitted by low lift, high lift, and rough terrain powered industrial trucks
ASME 1489-2-2001 Elevated Temperature Design Section VIII, Division 2

ES-AENOR

UNE 53-611-1985 Determination of compression relaxation of elastomers under different standardized temperatures and heating conditions

Society of Automotive Engineers (SAE)

SAE AIR4279A-2012 Heat Up Time
SAE J125-1988 Elevated Temperature Properties of Cast Irons

IN-BIS

IS 9677-1980 Guidelines for limiting temperature rise of electrical equipment windings when tested using different methods
IS 12802-1989 Temperature rise measurement of rotating electrical machines
IS 8913-1978 Measurement method of lamp cap temperature rise
IS 9678-1980 Measurement method of temperature rise of electrical equipment

American Society for Testing and Materials (ASTM)

ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

International Organization for Standardization (ISO)

ISO 3383:1985 Rubber; General directions for achieving elevated or subnormal temperatures for test purposes
ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Operational requirements
ISO 21029-2:2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
ISO 1893:2007 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
ISO 4736:1979 Fire tests; Small chimneys; Testing at elevated temperatures

NL-NEN

NEN 2762-1982 Power transformers Temperature rise

HU-MSZT

MSZ 10383-1980 Determination of plastic temperature rise

SCC

AS 2374.2:1982 Power transformers - Temperature rise
NS-EN 12707:1999 Plastic drums — Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l
BS ISO 15750-2:2002 Packaging. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l
DANSK DS/EN 60360:1998 Standard method of measurement of lamp cap temperature rise
DANSK DS/EN 13007:2000 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
DANSK DS/EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
NS-EN 1251-3:2000 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1000 litres volume — Part 3: Operational requirements
NS-EN 1251-1:2000 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1000 litres volume — Part 1: Fundamental requirements
BS 171-2:1978 Power transformers-Specification for temperature rise requirements
UNE-EN 1251-3:2001 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements.
IEC 60076-2:1976 Power transformers - Part 2: Temperature rise
BS 5371:1990 Standard method of measurement of lamp cap temperature rise
DANSK DS/EN ISO 15750-2:2008 Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l
IEC 60360:1971 Standard method of measurement of lamp cap temperature rise
NS-EN 13007:1999 Steel drums — Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
CEI EN 60360:1999 Standard method of measurement of lamp cap temperature rise
NS-EN 12707:2009 Plastics drums — Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
UNE-EN 60076-2:1998 POWER TRANSFORMER. PART 2: TEMPERATURE RISE.
DANSK DS/EN 12707:2009 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
AS 1359.32:1974 Rotating electrical machines - General requirements - Temperature-rise limits and measurement of temperatures
BS ISO 21029-1:2018 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume-Design, fabrication, inspection and tests
AS 1056:1972 Automatic electric stroarge water heaters with hot water deliveries ranging from 25 litres to 630 litres
AS Z42:1967 Non-returnable metal aerosol containers of up to and including 50 incapacity
BS 5371:1976 Specification for standard method of measurement of lamp cap temperature rise
DANSK DS/EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
BS ISO 20848-2:2006 Packaging. Plastics drums. Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l

SAE - SAE International

SAE J125-2018 Elevated Temperature Properties of Cast Irons
SAE J125-1969 Elevated Temperature Properties of Cast Irons

YU-JUS

JUS N.H1.012-1985 Power transformers. Temperature rise
JUS N.L0.003-1983 Standard method of measurement of lamp cap temperature rise

British Standards Institution (BSI)

BS EN 60076-2:1997 Power transformers - Temperature rise
BS EN ISO 21029-2:2015 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Operational requirements
BS EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements
BS EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements
BS EN 60360:1999 Standard method of measurement of lamp cap temperature rise
BS ISO 21029-1:2018+A1:2019 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume - Design, fabrication, inspection and tests
BS EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
BS EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing

IT-UNI

UNI 5814-1966 Plastic material testing. Determination of maximum temperature and rate of temperature increase during hardening of unsaturated polyester resin
UNI 10411-2-2021 Modification of existing lifts, hoists, escalators and similar appliances - Part 2: Hydraulic lifts not complying with Lift Directive
UNI 10411-1-2021 Modification of existing lifts, hoists, escalators and similar appliances - Part 1: Electric lifts not complying with Lift Directive

ZA-SANS

SANS 5909:1979 Refractoriness under load (with rising temperature) of refractory bricks
SANS 60076-2:1993 Power transformers Part 2: Temperature rise

CZ-CSN

CSN 35 0014-1971 Temperature-rise test of rotating electrical machinery
CSN 35 1082-1986 Power transformers. Methods of tempe-rature—rise tests
CSN 67 3150 Cast.02-1975 Stability of varnish at increased temperature

TH-TISI

TIS 4.2-2009 Standard method of measurement of lamp cap temperature rise
TIS 4 Pt.2-1979(en) METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE

RO-ASRO

STAS 1703/2-1980 Power transformers TEMPERATURE RISE
STAS 9904/4-1981 ROTATING ELECTBICAL MACHINES Test methods Temperature rise test

Standard Association of Australia （SAA）

AS 2374.2:1997 Power transformers - Temperature rise

Association Francaise de Normalisation

NF C32-102-7:1999 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 7 : cables with increased heat resistance for internal wiring for ? conductor temperature of 110 degrees Celsius.
NF E86-510-2*NF EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2 : operational requirements
NF E86-500-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volumes - Part 3 : operational requirements.
NF EN ISO 21029-2:2015 Cryogenic containers - Transportable, insulated, vacuum containers of a volume not exceeding 1,000 liters - Part 2: operating requirements
NF C72-102*NF EN 60360:2000 Standard method of measurement of lamp cap temperature rise
NF E86-500-1*NF EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1 : fundamental requirements.
NF T20-496:1973 Sodium tripolyphosphate for industrial use. Temperature rise test.
NF B40-315*NF EN ISO 1893:2009 Refractory products - Determination of refractoriness under load - Differential method with rising temperature

TR-TSE

TS 3149-1978 Steels For Bolts And Screws For Service At Elevated And High Temperatures

German Institute for Standardization

DIN EN 13007:2000-03 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l; German version EN 13007:1999
DIN EN 1251-1:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000
DIN EN ISO 21029-2:2016-02 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015); German version EN ISO 21029-2:2015
DIN EN 60360:1999 Standard method of measurement of lamp cap temperature rise (IEC 60360:1998); German version EN 60360:1998
DIN EN ISO 15750-2:2008-09 Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002); German version EN ISO 15750-2:2008
DIN EN 12707:2009-12 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l; German version EN 12707:2009
DIN EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008

RU-GOST R

GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures
GOST R 50470-1993 Standard method of measurement of lamp cap temperature rise
GOST ISO 1893-2014 Refractory products. Determination of refractoriness under load. Differential method with rising temperature

ESDU - Engineering Sciences Data Unit

ESDU 89026-1989 Temperatures in plates subjected to a sudden increase in recovery temperature.

Danish Standards Foundation

DS/EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements
DS/EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
DS/IEC 76-2:1981 Power transformers. Part 2: Temperature rise
DS/EN 60360/Corr.:1999 Standard method of measurement of lamp cap temperature rise
DS/EN 60360:1999 Standard method of measurement of lamp cap temperature rise
DS/IEC 360:1990 Standard method of measurement of lamp cap temperature rise
DS/ISO 3383:1987 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes

ES-UNE

UNE-EN ISO 21029-2:2016 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)

Korean Agency for Technology and Standards (KATS)

KS B ISO 21029-2-2022 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
KS C IEC 60360-2019 Standard method of measurement of lamp cap temperature rise
KS C IEC 60360-2009(2019) Standard method of measurement of lamp cap temperature rise
KS C IEC 60360:2009 Standard method of measurement of lamp cap temperature rise
KS B ISO 21029-2:2017 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements

Lithuanian Standards Office

LST EN 1251-1-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
LST EN 1251-3-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements

European Committee for Standardization (CEN)

EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)
HD 398.2 S1 A1-1988 Power transformers; part 2: temperature rise
HD 398.2 S1-1979 Power transformers; part 2: temperature rise

Military Standards (MIL-STD)

DOD A-A-53423-1988 BAG, BLOOD WARMING (DISPOSABLE)

International Electrotechnical Commission (IEC)

IEC 60360:1998/COR1:1999 Standard method of measurement of lamp cap temperature rise
IEC 60360:1998 Standard method of measurement of lamp cap temperature rise
IEC 60076-2:1993 Power transformers; part 2: temperature rise
IEC 60076-2/COR1:1997 Power transformers; part 2: temperature rise
IEC 60360:1987 Standard method of measurement of lamp cap temperature rise

GSO

GSO IEC 60360:2015 Standard method of measurement of lamp cap temperature rise
OS GSO ISO 21029-2:2016 Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -- Part 2: Operational requirements
GSO ISO 21029-2:2016 Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -- Part 2: Operational requirements
OS GSO 1549:2002 Power transformers - Part 2 : Temperature rise
OS GSO IEC 60360:2015 Standard method of measurement of lamp cap temperature rise
GSO ISO 15750-2:2013 Packaging -- Steel drums -- Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

European Committee for Electrotechnical Standardization（CENELEC）

HD 403-1980 Standard Method of Measurement of Lamp Cap Temperature Rise

NEMA - National Electrical Manufacturers Association

NEMA C78.25-1983 ELECTRIC LAMPS - METHOD OF MEASURING LAMP-BASE TEMPERATURE RISE

VN-TCVN

TCVN 6306-2-2006 Power transformers. Part 2: Temperature rise

Indonesia Standards

SNI 04-3904.2-1995 Power transformers. Part 2 : Temperature rise

AENOR

UNE-EN 1251-1:2001 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Part 1: Fundamental requirements.

CENELEC - European Committee for Electrotechnical Standardization

EN 60076-2:1997 Power Transformers Part 2: Temperature Rise

KR-KS

KS B ISO 21029-2-2017 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements

National Electrical Manufacturers Association（NEMA)

NEMA C78.25-1991 Electric Lamps - Lamp-Base Temperature Rise - Method of Measurement R(1996)

IPC - Association Connecting Electronics Industries

IPC TM-650 2.5.4.1-1987 Conductor Temperature Rise Due to Current Changes in Conductors
IPC TM-650 2.5.4.1A-1997 Conductor Temperature Rise Due to Current Changes in Conductors

Electronic Components, Assemblies and Materials Association

ECA 251-A-1970 Test to Determine the Temperature Rise as a Function of Current in Printed Conductors

DIN

DIN EN 12707:2000 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l; English version of DIN EN 12707