adventitia size

adventitia size, Total:237 items.

The international standard classification for "adventitia size" includes: Biology. Botany. Zoology , Optics and optical measurements , Pressure vessels, gas cylinders , Raw materials and raw glass , Small craft .

The Chinese standard classification for "adventitia size" includes: Basic Subject in general , Optical instrument in general , Fibre reinforced composites , Devices for small vessel .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35535-2017 Detection of genetically modified components in soybean and canola―Membrane-based gene-chip method

Professional Standard - Agriculture

248药典四部-2020 3400 Bioassay 3419 Group A Meningococcal Polysaccharide Molecular Size Determination
19兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses and Little Chaihu San
217药典三部-2010 Appendix Ⅷ ⅧG Group A Meningococcal Polysaccharide Molecular Size Determination Method
14兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Pony Rhubarb Tincture
255药典四部-2015 3400 Bioassay 3419 Group A Meningococcal Polysaccharide Molecular Size Determination
17兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, Mountain Rhubarb
11兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, and Great Chengqi San
12兽药产品说明书范本第二册-2013 Three paintings, three mountains, a thousand ponies, rhubarb end
299药典三部-2020 Bioassay 3419 Group A Meningococcal Polysaccharide Molecular Size Determination
16兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses and Euphorbias
13兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, Big Scutellaria, and Fish Scattered
274药典三部-2015 Bioassay 3419 Group A meningococcal polysaccharide molecular size assay General 115

Gansu Provincial Standard of the People's Republic of China

DB62/T 484-1996 Experimental method of wheat film-covered hole-seeding machine
DB62/T 4761-2023 Wheat variety Landa 211
DB62/T 595-1999 Wheat Variety Normal University No. 2

Professional Standard - Machinery

JB/T 8226.3-1999 Coating for optical element front surface reflecting coating

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30300-2013 Membrane Housing
GB/T 32559-2016 Infrared diamond-like carbon coating
GB/T 19315-2003 Small craft - Maximum load capacity

Group Standards of the People's Republic of China

T/LYGDL 002-2021 Atmospheric thermal spin film deaerator
T/CAMA 91-2023 Small electric film mulching machine
T/CASME 1306-2024 Leather film waterproof outdoor leisure bag
T/CATSI 08004-2023 small production area rice
T/CIPR 068-2022 Large-flux-reinforced ultrafiltration membrane
T/ZYLX 002-2019 Zhaoyuan Rice Fragrance

Professional Standard - Aquaculture

SC/T 3101-2010 Fresh and frozen large yellow croaker and fresh and frozen small yellow croaker
SC/T 3101-1984 Fresh large yellow croaker Fresh small yellow croaker

Professional Standard - Aviation

HB 7056-1994 Appearance test method of film layer of dry film lubricant

未注明发布机构

DIN EN ISO 4628-5 E:2022-01 Provisions for the assessment of the degradation of paint and varnish films - the magnitude, size and degree of uniform change in appearance of paints and varnishes - Part 5: Assessment of the degree of peeling (draft)
DIN EN ISO 4628-2 E:2014-08 Provisions for the assessment of the degradation of paint and varnish films - the magnitude, size and degree of uniform change in appearance of paints and varnishes - Part 2: Assessment of blistering levels (draft)
DIN EN ISO 4628-4 E:2014-08 Provisions for the assessment of the degradation of paint and varnish films - the magnitude, size and degree of uniform change in appearance of paints and varnishes - Part 4: Assessment of crack levels (draft)
DIN EN ISO 4628-7 E:2014-08 Provisions for the assessment of the magnitude, size and degree of uniform change in appearance of paint and varnish film degradation - Part 7: Velvet method for the assessment of chalking grades (draft)
DIN EN ISO 4628-5 E:2014-08 Provisions for the assessment of the degradation of paint and varnish films - the magnitude, size and degree of uniform change in appearance of paints and varnishes - Part 5: Assessment of the degree of peeling (draft)
DIN EN ISO 4628-10 E:2014-08 Provisions for assessing the magnitude, size and degree of uniform change in appearance of paint and varnish film degradation - Part 10: Assessment of filiform corrosion grades (draft)

Professional Standard - Military and Civilian Products

WJ 1852-2004 Specifications for metallic exterior reflectors

Jilin Provincial Standard of the People's Republic of China

DB22/ 1749-2012 Small soybeans for natto

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3189-2010 Polyethylene blown mulch film for farmland under film drip irrigation uses
DB65/T 3196-2011 Triticale Wittmack Shida No.1

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3632-2019 Garlic Film Covering Cultivation and Film Recycling Technical Regulations

Hebei Provincial Standard of the People's Republic of China

DB13/T 246.4-1996 Chinese cabbage variety Xiaoza 50
DB13/ 114-1991 Chinese cabbage variety Xiaoza 56

Professional Standard - Electron

SJ 2232-1982 Specification for metal packages of thick-film and thin-film integrated circuits

Shanxi Provincial Standard of the People's Republic of China

DB14/T 669-2012 Technical Regulations for Drill Sowing Cultivation of Film-Mulched Winter Wheat in Dry Land

Taiwan Provincial Standard of the People's Republic of China

CNS 2468-1966 Notation of Size for Watches and Clocks

Sichuan Provincial Standard of the People's Republic of China

DB5104/T 59-2023 Technical regulations for drip irrigation under plastic film for Chinese cabbage

International Organization for Standardization (ISO)

ISO 67:1981 Muscovite mica blocks, thins and films - Grading by size
ISO 4628-4:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-3:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-5:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-2:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-10:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 4628-7:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO 605:1991 Pulses; determination of impurities, size, foreign odours, insects, and species and variety; test methods
ISO 4628-1:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 14946:2001 Small craft - Maximum load capacity
ISO 4628-6:2007 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
ISO 14946:2021 Small craft - Maximum load capacity

SCC

CIE 208:2014 Effect of Stimulus Size on Colour Appearance
AWWA ACE63138 Innovative Membrane Research in Canada
AWWA ACE92197 Ultrafiltration Membrane Systems for Small Communities
AWWA MTC57607 Membrane Autopsy and Fouling Study on a Large-Scale UF Membrane Facility
BS 642:1951 Calcium carbide (graded sizes)
BS 642:1935 Carbide of calcium (graded sizes)
AWWA MTC64612 Fast-Track Membrane Designs for Small Water Systems
AWWA WQTC60550 Breaking New Ground: Large Membrane Water Plants
AWWA WQTC57040 21st Century: Integrated Membranes/Expanding Applications
AWWA ACE65411 Biological and Membrane Filtration for Small Systems
AWWA ACE59942 World's Largest Membrane Filtration Plants
CAN/CGSB 7.2-1994 Adjustable steel posts
AWWA MTC53898 Membrane Microfiltration for Small Wyoming Community

HU-MSZT

MSZ 9697-4.lap-1960 Fruit detection shape; size; weight detection
MSZ 8177/9.lap-1967 Template-sized steel sliding door inner profile wing (vitrified, including steel film)
MSZ 8100-1980 small mouth large wine bottle
MSZ 15873-1967 General regulations on the size of precast reinforced concrete window modules. size
MSZ 5725-1981 Large and small hot rolled hexagonal steel
MNOSZ 18557-1954 Coal testing. size screening
MSZ 2637-1968 Grain size rough analysis

International Commission on Illumination (CIE)

CIE 208-2014 EFFECT OF STIMULUS SIZE ON COLOUR APPEARANCE

RO-ASRO

STAS 7706-1966 Pig iron casing can be forged. Reduced elbow size with inner and outer turnbuckles
STAS 7699-1966 Pig iron casing can be forged. Internal and external threaded elbows. size
STAS 7707-1966 Pig iron casing can be forged. Internal and external threaded casing. size
STAS 7696-1966 Pig iron casing can be forged. Internal and external threaded elbows. size
STAS 7708-1966 Pig iron casing can be forged. Internal and external threaded casing. size
STAS 4704-1967 Corrugation size/dimensions of cylindrical metal outer layer
STAS 2114/6-1975 ISO TRAREZOIDAL SCREW THREADS Limits of size for external scrcw thiread
STAS 6761-1963 Petroleum equipment. Externally Cased Drill Pipe Size/Dimensions
STAS 7700-1966 Pig iron casing can be forged. 45 degree internal and external thread elbow size
STAS 2165-1966 Large saw blade turnbuckle size
STAS 7697-1966 The size of the forgeable pig iron casing with inner and outer screw openings and a 45-degree curvature
STAS 10370/1-1990 The stress reaches 7.5 kN, and the outer layer of the steel bar is an internal and external insulation layer of 24 kV. Rebar insulation size/dimensions
STAS 7193-1967 round button size
STAS 4867-1969 Threaded small wooden dowel size with connector
STAS 1653-1950 Insulated contact wheel size
STAS 5172-1969 Conical top six-slot thread small wooden nail size
STAS 884-1951 Vibration bearing size
STAS 7749-1967 Tape leader size
STAS 4846-1969 Small dowel size with inner taper notch thread
STAS 5676-1957 Ship equipment. metal dinghy size
STAS 1937-1959 Gear train small capacity narrow gauge carriage. size
STAS 7899-1967 Worm extender size
STAS 2166-1966 Turnbuckle. Fine tooth saw. size
STAS 7665-1966 Thin screw washer size
STAS 359-1967 Steel blade turning tool. Flat knife size
STAS 3953-1967 Steel milling cutter. size/dimensions
STAS 6313-1967 Steel blade turning tool. Tooth knife. size
STAS 4921-1959 Fork size for shoveling gravel
STAS 1913/5-1985 Foundation ground DETERMINATION OF GRAIN SIZE
STAS 7667-1966 Thick screw washer size
STAS 7704-1966 Pig iron casing can be forged. Reduce universal joint size

IETF - Internet Engineering Task Force

RFC 8270-2017 Increase the Secure Shell Minimum Recommended Diffie-Hellman Modulus Size to 2048 Bits
RFC 1073-1988 Telnet Window Size Option

American Society for Testing and Materials (ASTM)

ASTM F312-97(2003) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM F312-97 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
ASTM F312-08 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 14 NBC COMM V1-1993 Exterior Wall Coverings
BOCA CHAPTER 14 NBC-1999 Exterior Wall Coverings
BOCA CHAPTER 14 NBC-1996 Exterior Wall Coverings
BOCA CHAPTER 14 NBC-1993 Exterior Wall Coverings
BOCA NBC COMM96 V1 CH 14-1996 Exterior Wall Coverings
BOCA NBC COMM V1 CH 14-1999 Exterior Wall Coverings

IN-BIS

IS 6467-1989 Thoracic Surgery Instruments—Periostomies, Ribs, Alexander Patterns—Specifications
IS 5110-1969 Corneal magnifying glass specifications
IS 11043-1984 Epidural needle specifications

Military Standards (MIL-STD)

DOD A-A-54518-1991 PASTE, PERIODONTAL PROTECTIVE, SURGICAL (MEDIUM FIRM DRESSING)
DOD A-A-54445-1991 PASTE, PERIODONTAL PROTECTIVE, SURGICAL (SOFT DRESSING)
DOD A-A-54598-1992 CLIPPER, HAIR, AND BLADE SETS (SMALL ANIMAL)

American Gas Association

AGA B109.1-2000 Diaphragm Type Gas Displacement Meters (under 500 Cubic Feet Per Hour Capacity) Fourth Edition; XQ0008
AGA B109.2-2000 Diaphragm Type Gas Displacement Meters (500 Cubic Feet per Hour Capacity and over) Fourth Edition; XQ0009

BE-NBN

NBN-EN 27740-1992 Surgical instruments. Decomposable corrugated scalpel, combined sizes

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO M334-1986 Exterior Decoration Film for Automobiles

GM North America

GM GM3656M-1996 Exterior Reflective Film

Association Francaise de Normalisation

NF D27-408:2010 Letter boxes with reduced capacity and with large opening for outdoor installation - Requirements and testing.
NF T30-140-3:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting.
NF T30-140-10:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10 : assessment of degree of filiform corrosion.
NF T30-140-4:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4 : assessment of degree of cracking.
NF T30-140-5:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5 : assessment of degree of flaking.
NF T30-140-2:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2 : assessment of degree of blistering.
NF T30-071-7:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7 : assessment of degree of chalking by velvet method.
NF V45-010:1988 SALTWATER FISH. CLASSIFICATION BY SIZE.
NF V45-061:1967 FISH. CARP. CLASSIFICATION BY SIZE.
NF V45-062:1967 FISH. PIKE. CLASSIFICATION BY SIZE.
NF J95-055*NF EN ISO 14946:2021 Small craft - Maximum load capacity
NF T30-140-1:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1 : general introduction and designation system.
NF V03-776*NF ISO 605:1991 Pulses. Determination of impurites, size, foreign odours, insects and species and variety. Test methods.
NF V45-050:1988 CRUSTACEA. CLASSIFICATION BY SIZE.
NF V45-058:1988 Cephalopoda. Classification by size.
NF J95-055:2001 Small craft - Maximum load capacity.
NF C97-036*NF EN 61920:2005 Infrared free air applications.

CZ-CSN

CSN ONA 30 7650-1967 Spokes - size
CSN ON 93 1519-1962 Small hooks and small mesh. coat
CSN 01 3110-1982 Technical drawings.Sizes
CSN 13 7201 Z2-1997 Health gadgets. Scrap accessories. size
CSN 63 1101-1983 Bioyols tyres. Sizes
CSN 72 1218-1983 Limestone. Lump size
CSN 35 6572-1988 Scintillators and containers. Size

Korean Agency for Technology and Standards (KATS)

KS B 7067-2002(2012) DIMENSION OF SILK LOOM
KS M ISO 4628-3:2013 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting
KS M ISO 4628-3:2008 Paints and varnishes-Evaluation of degradation of paint coatings-Designation of intensity, quantity and size of common types of defect-Part 3:Designation of degree of rusting
KS M ISO 4628-4:2008 Paints and varnishes-Evaluation of degradation of paint coatings-Designation of intensity, quantity and size of common types of defect-Part 4:Designation of degree of cracking
KS M ISO 4628-5:2012 Paints and varnishes－Evaluation of degradation of coatings－ Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 5：Assessment of degree of flaking
KS M ISO 4628-4:2013 Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking
KS M ISO 4628-2:2016 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 2：Assessment of degree of blistering
KS M ISO 4628-5:2017 Paints and varnishes－Evaluation of degradation of coatings－ Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 5：Assessment of degree of flaking
KS M ISO 4628-2:2011 Paints and varnishes-Evaluation of degradation of coatings-Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 2:Assessment of degree of blistering
KS M ISO 4628-10:2016 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 10：Assessment of degree of filiform corrosion
KS M ISO 4628-10:2011 Paints and varnishes-Evaluation of degradation of coatings-Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 10:Assessment of degree of filiform corrosion
KS V ISO 14946-2005(2020) Small craft－Maximum load capacity
KS M ISO 4628-7:2011 Paints and varnishes-Evaluation of degradation of coatings-Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 7:Assessment of degree of chalking by velvet method
KS M ISO 4628-7:2016 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 7：Assessment of degree of chalking by velvet method
KS K 0095-1987 Sizes of Men's Sports Wear
KS K 0095-1983 Sizes of Men's Sports Wear
KS H ISO 605:2009 Pulses－Determination of impurities, size, foreign odours,insects, and species and variety－Test methods
KS M ISO 4628-1:2017 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 1：General introduction and designation system
KS V 0912-1981(2011) Size of spare parts boxes for marine use
KS M ISO 4628-6:2012 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 6：Assessment of degree of chalking by tape method
KS M ISO 4628-1:2012 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 1：General introduction and designation system
KS V 8840-1987 Marine Shore Connection Boxes (Small Type)

British Standards Institution (BSI)

BS EN ISO 4628-5:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of flaking
BS EN ISO 4628-5:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking
BS EN ISO 4628-3:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of rusting
BS EN ISO 4628-2:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of blistering
BS EN ISO 4628-4:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of cracking
BS EN ISO 4628-10:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion
BS EN ISO 4628-7:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of chalking by velvet method
BS EN ISO 4628-1:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - General introduction and designation system
BS 5194-4:1985 Surgical instruments - Specification for scissors, shears and other jointed cutting instruments
BS EN ISO 4628-10:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of filiform corrosion
BS 5194-4:1986 Surgical instruments. Specification for scissors, shears and other jointed cutting instruments
BS EN ISO 4628-8:2012 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of delamination and corrosion around a scribe or other artificial defect
BS EN ISO 14946:2001 Small craft - Maximum load capacity
BS EN ISO 14946:2021 Small craft. Maximum load capacity

American National Standards Institute （ANSI)

ANSI B109.2-2000 Diaphragm-Type Gas Displacement Meters (500 Cubic Feet Per Hour Capacity and Over)

SE-SIS

SIS 81 76 03-1972 Small steel and metal doors. Sizes
SIS 81 73 03-1972 Light doorsets. Sizes
SIS 36 74 11-1974 Trim for doors and windows. Sizes
SIS 85 14 10-1970 Shirts. Determination of size
SIS SS 81 80 52-1980 Windows — Frame sizes
SIS 61 30 11-1965 Forms. Sizes and disposition
SIS 81 76 02-1972 Steel and metal doors. Sizes
SIS 23 42 05-1973 Plywood. Sizes and form
SIS 62 23 01-1974 Overhead transparencies. Sizes and disposition

PL-PKN

PN P50022-1964 Drawing papers Sizes

German Institute for Standardization

DIN EN ISO 4628-2:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003); German version EN ISO 4628-2:2003
DIN EN ISO 4628-4:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003); German version EN ISO 4628-4:2003
DIN EN ISO 4628-5:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003); German version EN ISO 4628-5:2003
DIN EN ISO 4628-10:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003); German version EN ISO 4
DIN EN ISO 4628-3:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003); German version EN ISO 4628-3:2003
DIN EN ISO 4628-7:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003); German version EN
DIN EN ISO 4628-1:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003); German version EN ISO 46

Indonesia Standards

SNI 12-4685-1998 Sizes of hockey balls
SNI 06-2996-1992 PVC film for metal coating

PT-IPQ

NP 1976-1985 fish. Big head fish. Sort by size
NP 2101-1985 fish. Snapper graded by size

CN-STDBOOK

图书 3-8927 Small barcode big world
图书 3-8956 small quality of life

Danish Standards Foundation

DS/ISO 14946:2021 Small craft – Maximum load capacity
DS/EN ISO 14946/AC:2005 Small craft - Maximum load capacity
DS/EN ISO 14946:2001 Small craft - Maximum load capacity

ET-QSAE

ES B.B8.102-1973 Determination of pulse size

AR-IRAM

IRAM 16 507-1962 Diamond size classification
IRAM 5158-1960 Hammer hole size

Japanese Industrial Standards Committee (JISC)

JIS F 1041:2004 Small craft -- Maximum load capacity

European Committee for Standardization (CEN)

EN ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021)

IPC - Association Connecting Electronics Industries

IPC TM-650 2.3.23.1A-1988 Cure (Permanency) UV Initiated Dry Film Solder Masks

Society of Automotive Engineers (SAE)

SAE AMS3084B-2010 LUBRICANT, SOLID FILM Minimal Outgassing

RU-GOST R

GOST R 52381-2005 Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST R ISO 14946-2013 Small craft. Maximum load capacity