Check Parallel Trials

Check Parallel Trials, Total:115 items.

The international standard classification for "Check Parallel Trials" includes: Metallic coatings , Fasteners in general , Diagnostic, maintenance and test equipment .

The Chinese standard classification for "Check Parallel Trials" includes: Fowl and egg processing and products , Grain processing and products , Dump truck , Material Protection , Fastener , Highway vehicle servicing installation .

Professional Standard - Commodity Inspection

SN 0577-1996 Rules for the inspection of scrap motor for import
SN/T 0517-1995 Rules of inspection of dried eggs for export
SN/T 1563-2011 Rules of Inspection for Import and Export Linters
SN/T 0260-1993 Rules for the inspection of vital wheat gluten meal for export
SN/T 1563-2005 Rule of inspection for import and export linters
SN/T 0518-1995 Rules of inspection of frogen eggs for export

Taiwan Provincial Standard of the People's Republic of China

CNS 12754-1990 Method of Test for Parallel Screw Gauges
CNS 10734-1984 Method of Test for the Plastic Rims of Bicycle
CNS 455-2005 Wood - Determination of ultimate shearing stress parallel to grain
CNS 11470-1985 Method of Test for Balancing Beams
CNS 8170-1994 Method of Test for Flat Pallets
CNS 5653-1980 Method of Test for Level Gauge

Professional Standard-Ships

CB 3448-1992 Test methods and inspection rules for marine balance valves

Military Standard of the People's Republic of China-General Armament Department

GJB 164.62-1986 Landing ship mooring and navigation test procedures Azimuth level test
GJB 524.59-1988 Procedure for mooring and sailing test of speedboats (planing boats) azimuth level test
GJB 524.60-1988 Speedboat (planing boat) mooring and sailing test procedures gyro platform test

Professional Standard - Automobile

QC/T 76.8-1993 Test methods for mining dump trucks - Ride comfort test

Professional Standard - Aviation

HB 5053-1977 Quality inspection of palladium coating (trial implementation)
HB 2083-1974 Inspection platform (L=200~800mm)
HB 5066-1977 Quality inspection of spray galvanized layer (trial implementation)
HB 2083-1989 Inspection platform (L=200~800mm)
HB 5054-1977 Quality Inspection for Rhodium Coating

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 016-1999 Verification Regulation of Roller Opposite Force Type Tester's Aligner
JJG 269-1981 Verification Regulation of Torsion Testing Machines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3098.17-2000 Mechanical properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method
GB/T 28529-2025 Platform brake testers

Group Standards of the People's Republic of China

T/HFJX 2057-2023 Specification for inspection and test of DC charger for remanufactured electric flatbed vehicle

Professional Standard - Machinery

JB/T 3313.3-1999 Plane milling machine Accuracy inspection

Swedish Institute for Standards

SS-ISO 1708:1986 Test conditions for general purpose parallel lathes - Testing of the accuracy
SS-EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
SS-EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)

German Institute for Standardization

DIN 52185:1976 Testing of wood; compression test parallel to grain
DIN EN ISO 15330:2000 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
DIN EN ISO 15330:2000-01 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN EN ISO 17643 E:2013-07 Non-destructive testing of welds Eddy current testing of welds by multi-plane analysis (draft)
DIN 52185:1976-09 Testing of wood; compression test parallel to grain
DIN 876-2:1984 Surface plates; cast iron surface plates, requirements and testing
DIN V 53296:1977 Compression test with the test layer parallel to the face sheet
DIN EN 14584:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; English version of DIN EN 14584
DIN 53860-1:1981 Testing of textiles; testing of the bulging tendency of textile fabrics; elbow-test, static strain
DIN EN 1711:2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; German version EN 1711:2000
DIN EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006); German version EN ISO 23278:2009
DIN 53863-1:1960 Testing of textiles; abrasion test methods for textile planar fabrics, principles
DIN EN ISO 23278 E:2013-02 Magnetic particle testing acceptance levels for non-destructive testing of welds (draft)
DIN 876-1:1984 Surface plates; natural hard rock surface plates; requirements and testing

Association of German Mechanical Engineers

VDI VDE DGQ 2618 Blatt 3-1-2004 Test instruction for gauge blocks
VDI VDE DGQ 2618 Blatt 6-1-2009 Test instruction for optical flats and optical parallels
VDI VDE DGQ 2618 Blatt 6-1-2008 Test instruction for optical flats and optical parallels
VDI/VDE/DGQ 2618 Blatt 6.1-2009 Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels
VDI VDE DGQ 2618 Blatt-17-1 E:2013-09 Measuring and testing equipment inspection - Horizontal length measuring machine inspection instructions
VDI VDE DGQ 2618 Blatt 6-2-2014 Measuring and testing equipment inspection instructions for control panels
VDI/VDE/DGQ 2618 Blatt 17.1-2014 Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines
VDI/VDE/DGQ 2618 Blatt 4.4-2009 Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers

Gosstandart of Russia

GOST R ISO 15330-2010 Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
GOST 25889.2-1983 Metal-cutting machine tools. Methods of checking specimen two flat surfaces for parallelism

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 1708:2013 Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy

Bureau of Indian Standards

IS 10190-2018 Acceptance Conditions for General Purpose Parallel Lathes- Testing of the Accuracy
IS 19002-2023 Test conditions for Vertical Surface Type Broaching Machines-Testing of Accuracy
IS 17445-2020 Fasteners — Preloading Test for the Detection of Hydrogen Embrittlement — Parallel Bearing Surface Method

Ente Nazionale Italiano di Unificazione

UNI ISO 1708:2010 Acceptance conditions for general purpose parallel lathes - Testing of the accuracy
UNI 5805-1966 Textiles: Flame resistance testing with horizontal specimens
UNI EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis

GCC Standardization Organization

GSO ISO 1708:2013 Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy

Spanish Association for Standardization (UNE)

UNE-ISO 1708:2012 Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy
UNE-EN 40-3-2:2001 Lighting columns. Part 3-2: Design and verification. Verification by testing.
UNE 66-802-1989 Organization and implementation of laboratory proficiency tests

Association Francaise de Normalisation

NF EN ISO 15330:1999 Fasteners - Preload test for hydrogen embrittlement detection - Parallel plate method
NF E25-010*NF EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method.
NF A89-530/A1:2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis.
NF A89-530:2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis.
NF P97-407:1980 LIGHTING COLUMNS. VERIFICATION OF STRUCTURAL DESIGN BY TESTING. (EUROPEAN STANDARD EN 40-8).
NF A89-541:1998 Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.
NF A89-551:1998 Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.
NF A04-306*NF EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.
NF A09-491:1989 Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.
NF A09-391:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources

British Standards Institution (BSI)

BS DD CEN ISO/TS 22476-11:2006 Geotechnical investigation and testing - Field testing - Flat dilatometer test
BS EN ISO 15330:1999(2000) Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
BS 2011-2.1Ta:1989 Environmental testing - Tests - Test Ta - Soldering - Solderability testing by the wetting balance method
BS EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method

Danish Standards Foundation

DANSK DS/EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
DS/EN ISO 15330:2000 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method

Korean Agency for Technology and Standards (KATS)

KS B ISO 15330-2022 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15330-2017 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15330-2017(2022) Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 1708-2022 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
KS B ISO 15330:2001 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B ISO 15330:2017 Fasteners－Preloading test for the detection of hydrogenembrittlement－Parallel bearing surface method
KS B 0540-1995 Industrial-process control valves-Inspection and routine testing
KS B 0540-2014(2024) Industrial-process control valves — Inspection and routine testing
KS C 0236-1994 Basic environmental testing procedures Test Ta:Soldering Solderability testing by the wetting balance method

International Organization for Standardization (ISO)

ISO/TS 22476-11:2005 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test
ISO 22476-11:2017 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test
ISO 15330 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 4703 Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy

Thai Industrial Standards Institute (TISI)

TIS 2444-2009 Fasteners.preloading test for the detection of hydrogen embrittlement.parallel bearing surface method

Japanese Industrial Standards Committee (JISC)

JIS B 6211:2006 Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy
JIS C 0053:1996 Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method
JIS B 6213:1986 Test code for performance and accuracy of surface grinding machines with horizontal grinding wheel spindle and reciprocating table
JIS B 6213:2006 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy

European Committee for Standardization (CEN)

EN ISO 22476-11:2017 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test (ISO 22476-11:2017)
EN ISO 15330:1999 Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method ISO 15330:1999

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7688-2007 Test conditions for internal cylindrical grinding machines with horizontal spindle.Testing of accuracy

Canadian Standards Association (CSA)

CAN/CSA-O132.2.3-1990(R2003) Testing and Inspection Requirements for Wood Flush Doors

Netherlands Institute for Standardization

NEN-ISO 2244:1993 Packaging. Complete, filled transport packages. Horizontalimpact tests (horizontal or inclined plane test. Pendulum test) (ISO 2244:1985)

Lithuanian Standards Office

LST EN ISO 15330:2001 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)

National Standardisation Body (ASRO)

STAS 86-1967 wood. Parallel pressure test with fiber

Standards Norway

NS-EN ISO 15330:1999 Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method (ISO 15330:1999)

American Gear Manufacturers Association

AGMA 915-3-A99-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism

Process Industry Practices

PIP PNE00012-2017 Piping Examination and Leak Test Guide

South African Bureau of Standard

SANS 1700-6-6:2003 Fasteners Part 6: Testing and acceptance inspection Section 6: Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method