absolute factor

absolute factor, Total:108 items.

The international standard classification for "absolute factor" includes: Insulation systems , Chemical analysis , Other insulating materials .

The Chinese standard classification for "absolute factor" includes: Electrical insulating material and its products , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5654-2007 Insulating liquids - Measurement of relative permittivity dielectric dissipation factor（tanδ）and d.c. resistivity
GB/T 25186-2010 Surface chemical analysis—Secondary-ion mass spectrometry—Determination of relative sensitivity factors from ion-implanted reference materials
GB/T 20111.6-2022 Electrical insulation systems—Procedures for thermal evaluation—Part 6:Multifactor evaluation with increased factors during diagnostic testing

Group Standards of the People's Republic of China

T/QGCML 3106-2024 Gut flora data evaluation system for the effect of probiotic factors
T/CEEIA 343-2018 Evaluation method of multifactor endurance for traction motor’s insulation systems

未注明发布机构

IEEE Std 286-2000(R2012) IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
ASTM RR-D27-1015 2003 D0924-Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

Taiwan Provincial Standard of the People's Republic of China

CNS 8787-1988 Method for Determining Dielectric Constant and Dielectric Dissipation Factor of Heat Shrinkable Tubing for Electrical Insulation
CNS 14765-2003 Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels

Professional Standard - Energy

NB/T 11209-2023 Multifactor evaluation method of endurance for electrical insulation systemsunder simultaneous electrical and damp heat stresses

Japanese Industrial Standards Committee (JISC)

JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor
JIS C 62125:2022 Environmental considerations specific to insulated electrical power and control cables

GM North America

GM GM9176P-1993 Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape

SCC

AWWA ACE92126 The Effect of Molecular Weight and Ionic Strength on Ultrafiltration Permeation Factors
NS 3845:2020 Blue-Green Factor - Calculation method and weighting factors
CIE 076-1988 Intercomparison on measurement of (total) spectral radiance factor of luminescent specimens
AWWA MTC57589 An Absolute Barrier to Cryptosporidium — A British Approach
AWWA PATH50790 Evaluation of PCR-Based Genetic Fingerprinting for Characterization of Waterborne Cryptosporidium parvum
NS-EN 978:1997 Underground tanks of glass-reinforced plastics (GRP) — Determination of factor alpha and factor beta
UNE 21109:1982 TEST ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT.
UNE 207002:1999 IN INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 000 V. A.C POWER ARC TESTS ON INSULATOR SETS.
AWWA WQTC60636 Evaluation of Virulence Factor Activity Relationships (VFAR) for Public Health Protection
DANSK DS/ISO/TR 29901:2008 Selected illustrations of full factorial experiments with four factors
CEI EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
UNE 21109/1M:1996 ERRATUM TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT.
UNE 21109/1M:1996 TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT.
DANSK DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
NS-EN 12683:1998 Biotechnology — Modified organisms for application in the environment — Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification
AS 1137.4:1972 Insulators - Porcelain stay insulators
BS 5737:1979 Method for the measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids

GSO

BH GSO IEC 62125:2023 Environmental considerations specific to insulated electrical power and control cables
GSO IEC 62125:2022 Environmental considerations specific to insulated electrical power and control cables
GSO ISO 18114:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
OS GSO ISO 16358-1:2016 Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor
BH GSO ISO 16358-1:2017 Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor
GSO ISO 16358-1:2016 Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor
GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
BH GSO ISO 18114:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
OS GSO IEC 60247:2015 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity

British Standards Institution (BSI)

BS IEC 62125:2019 Environmental considerations specific to insulated electrical power and control cables
BS EN 60034-27-3:2016 Rotating electrical machines. Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
BS 2067:1953 Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
BS ISO 18114:2021 Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials

HU-MSZT

MSZ 4803/36.lap-1969 Test the insulating varnish. Determination of dielectric constant and loss factor

American Society of Mechanical Engineers (ASME)

ASME B31J-2023 Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components
ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES
ASME B31J-2017 Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components
ASME B31J-2017/errata-2017 Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0302-33-2018 Electrical insulation systems - Procedures for thermal evaluation - Part 33: Multifactor evaluation with increased factors at elevated temperature (IEC 112/388/CDV:2017); German and English version prEN 61857-33:2017

Danish Standards Foundation

DS/ISO/TR 29901/Corr. 1:2009 Selected illustrations of full factorial experiments with four factors
DS/ISO/TR 29901:2008 Selected illustrations of full factorial experiments with four factors
DS/EN 978:1998 Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
DS/IEC 247:1979 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity

Korean Agency for Technology and Standards (KATS)

KS B 5410-2013(2018) Methods of measurement for vignetting factor and relative focal plane illuminance
KS B 5410-1982 Methods of measurement for vignetting factor and relative focal plane illuminance
KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
KS D ISO 18114-2020 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 4.10-1996 Limit States@ Load Factors@ and Resistance Factors
DIVISION I 5.13-1996 Limit States@ Load Factors and Resistance Factors (Interim 1997)
DIVISION I-A 3.7-1996 Response Modification Factors

National Electrical Manufacturers Association（NEMA)

NEMA C29.17-2013 For Composite Insulators - Transmission Line Post Type

American Society for Testing and Materials (ASTM)

ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-23 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

PL-PKN

PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity

KR-KS

KS B 5410-2023 Measurement method for vignetting factor and relative illuminance of photographic lenses
KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

RO-ASRO

STAS 11342-1979 ANIONIC ASPHALTIC EMULSION WITH SLOW BRF.AKING I FOR HYDROINSULATIONS

FI-SFS

SFS 5355-1987 Insulating tubes, insulating grooves and insulating equipment. Use a pipe alignment instrument to measure the thermal conductivity of insulating pipes

The American Road & Transportation Builders Association

AASHTO DIVISION I 5.13-1996 Limit States, Load Factors and Resistance Factors Interim 1997

Building Officials and Code Administrators International(U.S.)

BOCA IZC-1998 CHAPTER 7-1998 Factor/Industrial Zones

API - American Petroleum Institute

API PUBL 4515-1990 Use of Reactivity Factors to Predict Ozone Impacts of Methanol Fuel

International Electrotechnical Commission (IEC)

IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE No 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
ANSI/IEEE Std 286-1975(R1981) IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-1975 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE P286/D13, January 2024 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE P286 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE 286-2000 Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE P286/D11, August 2022 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE P286/D12, October 2023 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation

Lithuanian Standards Office

LST EN 978-2000 Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta

Indonesia Standards

SNI 04-6542-2001 Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid
SNI 13-6179-1999 Determination for the concretion factor of bauxite ores

German Institute for Standardization

DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004

Association Francaise de Normalisation

NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
NF C27-237*NF EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method.
NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and DC resistivity
NF ISO 2469:2014 Paper, cardboard and pulp - Measurement of diffuse radiance factor (diffuse reflectance factor)
NF EN 978:1997 Underground glass-reinforced plastic (GRP) tanks - Determination of alpha factor and beta factor

CO-ICONTEC

ICONTEC 2979-1991 Electronics. Visual inspection of electronic insulating oils in petroleum derivatives

RU-GOST R

GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity

Society of Automotive Engineers (SAE)

SAE ARP4032A-1998 Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays

AENOR

UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).

ES-UNE

UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE-EN 978:1998 UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). DETERMINATION OF FACTOR ALPHA AND FACTOR BETA.

International Organization for Standardization (ISO)

ISO/DIS 2469:2023 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)

SE-SIS

SIS SS 424 05 51-1985 Insulators — Spool insulator

WRC - Welding Research Council

BULLETIN 392-1994 DEVELOPING STRESS INTENSIFICATION FACTORS: I - STANDARDIZED METHOD FOR DEVELOPING STRESS INTENSIFICATION FACTORS FOR PIPING COMPONENTS ; II - EFFECTS OF WELD METAL PROFILE ON THE FATIGUE LIFE OF INTEG

International Telecommunication Union (ITU)

ITU-T G.998.2-2005 Ethernet-based Multi-Pair Bonding

Others: Sigma factor,factor,factor correction factor,correction factor factor,factor factor,absolute correction factor,Absolute correction factor for ethanol,absolute potential,UV Absolute Response Factor,absolute wavelength,Absolute and relative correction factors,factor+,Calculation of absolute correction factors,absolute factor,Absolute correction factor for ethanol,absolute potential,Absolute Correction Factor and Relative Correction Factor,Absolute PCR