Use of secondary thermal analyzer

Use of secondary thermal analyzer, Total:91 items.

The international standard classification for "Use of secondary thermal analyzer" includes: Chemical analysis , Medical equipment .

The Chinese standard classification for "Use of secondary thermal analyzer" includes: Basic standards and general methods , Extracorporeal circulation, artificial organ and prosthesis device .

中国石油天然气总公司

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer

国家药监局

YY/T 1773-2021 Disposable transfer line for peritoneal dialysis
YY/T 1730-2020 Hemodialysis catheter for single use
YY/T 1760-2021 Disposable drainage system for peritoneal dialysis

Group Standards of the People's Republic of China

T/SDZDH 003-2021 Identification and Resolution Of Industrial Internet-Application Service Platform Operation Specification of Instrument
T/SDZDH 002-2021 Identification and Resolution Of Industrial Internet—Specification Of Instrument Parts Coding and Identification
T/SDZDH 004-2021 Identification and Resolution Of Industrial Internet—Application Service Platform Interface of Instrument
T/CAMDI 103-2023 Hemodialysis IV catheter for single use

未注明发布机构

IEC 62620:2023 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications
DIN EN ISO 7933 E:2002-12 Thermal Environmental Ergonomics Determining and Interpreting Thermal Stress Analytically Using Predicted Thermal Strain Models (Draft)

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 115-1994 Verification Regulation for Secondary Meter Used in Device of Tour Inspecting and Warning the Axle Termperature of Passcnge Car

Hunan Provincial Standard of the People's Republic of China

DB43/T 2452-2022 General technical requirements for heat loss rate analyzer

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-31-2-1998 Disaggregating Residential Hot Water Use - Part II
ASHRAE AT-96-18-1-1996 Disaggregating Residential Hot Water Use

International Organization for Standardization (ISO)

ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 2202:1972 Liquid chlorine for industrial use; Determination of water content using an electrolytic analyser
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 2202:1972/Add 1:1975 Liquid chlorine for industrial use — Determination of water content using an electrolytic analyser — Addendum 1
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests

American Society for Testing and Materials (ASTM)

ASTM UOP709-70 Gas Analysis by Gas Chromatography Using a Two - Injection Technique
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry

British Standards Institution (BSI)

BS ISO 13084:2018 Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS ISO 7270-2:2012 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
21/30423211 DC BS EN IEC 63330. Requirements for reuse of secondary batteries
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BS ISO 7270-2:2024 Rubber. Analysis by pyrolytic gas-chromatographic method - Determination of styrene/butadiene/isoprene ratio
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS EN 62620:2015+A1:2023 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for use in industrial applications

HU-MSZT

MSZ 11596-1983 Resolution (2) Mineral water, analytical function
MSZ 7370-1961 Carbon disulfide for analytical purposes

GSO

GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
OS GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BH GSO ISO 13084:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BH GSO ISO 14934-3:2016 Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method
OS GSO ISO 14934-3:2013 Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method
GSO ISO 14934-3:2013 Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method
GSO IEC 62133:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
GSO ISO 23812:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials

Japanese Industrial Standards Committee (JISC)

JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
JIS B 7986:2006 Continuous analyzers for carbon dioxide in flue gas
JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials

American National Standards Institute （ANSI)

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)

ZA-SANS

SANS 61960:2005 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

European Committee for Electrotechnical Standardization（CENELEC）

EN 62620:2015 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for use in industrial applications

IX-IX-IEC

IEC 62620:2014/AMD1:2023 Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0510-35-2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications (IEC 62620:2014); German version EN 62620:2015

SCC

10/30199193 DC BS ISO 13084. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time of flight secondary ion mass spectrometer
DANSK DS/ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
DANSK DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
NS 9013:1981 Liquid chlorine for industrial use — Determination of water content using an electrolytic analyser
CAN 3-A23.5-M82-1982 Secondary cement constituents used in concrete constructions
NS-EN 12515:1997 Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989 modified)
DIN EN ISO 7933 E:2018 Draft Document - Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
AENOR UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
NS-EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
DANSK DS/ISO 23674:2022 Cosmetics – Analytical methods – Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS ISO 14237:2000 Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials

DIN

DIN EN 62620:2023 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications (IEC 62620:2014 + AMD1:2023); German version EN 62620:2015 + A1:2023

Association Francaise de Normalisation

NF EN IEC 63115-1/A1:2022 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs étanches au nickel-métal hydrure destinés à l'utilisation dans des applications industrielles - Partie 1 : Performances
NF ISO 14237:2010 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Determination of boron atoms in silicon using uniformly doped materials
NF EN IEC 61960-4:2020 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs au lithium pour applications portables - Partie 4 : éléments et batteries d'accumulateurs boutons au lithium
NF C58-620*NF EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

CZ-CSN

CSN 38 5523-1960 Fuel gas analysis with the Orsat gas analyser.

Danish Standards Foundation

DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

German Institute for Standardization

DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN EN ISO 7933:2024-03 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023); German version EN ISO 7933:2023

GOSTR

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

International Electrotechnical Commission (IEC)

IEC 62620:2014+AMD1:2023 CSV Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

European Committee for Standardization (CEN)

EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 52-1951 Application Guide for GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES

AENOR

UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)

KR-KS

KS C IEC 62620-2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary lithium cells and batteries for use in industrial applications

Korean Agency for Technology and Standards (KATS)

KS C IEC 62620:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary lithium cells and batteries for use in industrial applications

Lithuanian Standards Office

LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)

GOST

GOST R 71032-2023 Resource saving. Reference documents on secondary production resources. Guidelines for the presentation of information on the areas of use of secondary resources

International Telecommunication Union (ITU)

ITU-T H.120 NOTE-2013 Codecs for videoconferencing using primary digital group transmission

ES-UNE

UNE-EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications (Endorsed by AENOR in February of 2015.)

PL-PKN

PN G04561-1992 Solid fuels. Determination of nitrogen with the use of the Perkin-Elmer analyser