wave transverse longitudinal wave

wave transverse longitudinal wave, Total:81 items.

The international standard classification for "wave transverse longitudinal wave" includes: Road vehicle tyres , Paper and board .

The Chinese standard classification for "wave transverse longitudinal wave" includes: Tyre , Paper .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 452.1-2002 Paper and board identification of machine and cross direction
GB/T 23663-2009 Test method of automobile tyre longitudinal and lateral stiffness

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 23663-2020 Test method for longitudinal and lateral stiffness of motor vehicle tyres

Taiwan Provincial Standard of the People's Republic of China

CNS 5175-1994 Method of Determination for Machine and Cross Directions of Paper and Paperboard
CNS 1239-1987 Method of Test for Fundamental Transverse Longitudinal and Torsional Frequencies of Concrete Specimens

Professional Standard - Petroleum

SY/T 6423.3-1999 Petreoleum and natural gas industries - Non - Destructive testing (NDT) methods of steel tubes for pressure purposes - Ultrasonic testing of the weld seam of submerged arcwelded steel

Military Standard of the People's Republic of China-General Armament Department

GJB 593.1-1988 Non-destructive testing quality control specifications Ultrasonic longitudinal and transverse wave inspection

American Society for Testing and Materials (ASTM)

ASTM E2479-16(2021) Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L CR ) Waves
ASTM E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L CR ) Waves
ASTM D1502-60(1980)e1 Method of Test for Transverse Load of Corrugated Reinforced Plastic Panels
ASTM A435/A435M-90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A435/A435M-90(2007) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

Korean Agency for Technology and Standards (KATS)

KS D ISO 9765:2002 Submerged arc-welded steel tubes for pressure purposes－Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
KS D ISO 9765-2002(2012) Submerged arc-welded steel tubes for pressure purposes－Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
KS D 0252-2022 Ultrasonic testing for the detection of longitudinal and/or transverse imperfections in welded seam of arc welded steel pipes
KS B ISO 10893-11:2018 Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
KS D ISO 9305-2018 Seamless steel tubes for pressure purposes－Full peripheral ultrasonic testing for the detection of transverse imperfections

HU-MSZT

MSZ 1410-1976 Longitudinal and transverse cutting machines

International Organization for Standardization (ISO)

ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 3409:1975 Passenger cars; Lateral spacing of foot controls

SE-SIS

SIS SMS 691-1948 Spacers for longitudinal corrugated pipes. CT type

NL-NEN

NEN 1761-1993 Paper and board. Determination of machine direction and cross direction

Society of Automotive Engineers (SAE)

SAE J2718-2006 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement
SAE J2718-2010 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Froce vs. Lateral Displacement

SAE - SAE International

SAE J2718-2018 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement
SAE J2718-2017 Test for Tire Quasi-Static Longitudinal Force versus Longitudinal Displacement and Quasi-Static Lateral Force versus Lateral Force

RO-ASRO

STAS SR ISO 9765:1994 Submerged arc-welded steel tubes for pressure purposes. Ultrasonic testing of the weld seam for ?he detection of longitudinal and/or transverse imperfections

SCC

NS 1960:1968 Longitudinal and transverse joints in ply type conveyor belts
09/30166488 DC BS ISO 10893-11. Non-destructive testing of steel tubes. Part 11. Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transversal imperfections
DANSK DS/EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
NS-EN 10246-9:2000 Non-destructive testing of steel tubes — Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
UNE-EN 10246-9:2000 NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 9: AUTOMATIC ULTRASONIC TESTING OF THE WELD SEAM OF SUBMERGED ARC WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS.
AENOR UNE-EN ISO 10893-11:2011 Non-destructive testing of steel pipes. Part 11: Automatic ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections. (ISO 10893-11:2011)
NS-EN 13036-6:2008 Road and airfield surface characteristics — Test methods — Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
NS-EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
DANSK DS/EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges

Association Francaise de Normalisation

NF A49-785-11*NF EN ISO 10893-11:2011 Non destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
NF EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: automated ultrasonic testing of the weld bead of welded steel tubes for the detection of longitudinal and/or transverse imperfections
NF P98-831-6*NF EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6 : measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges.

RU-GOST R

GOST R ISO 10893-11-2016 Seamless and welded steel tubes. Part 11. Automated ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
GOST R ISO 10893-10-2014 Seamless and welded steel tubes. Part 10. Automated full peripheral ultrasonic testing for the detection of longitudinal and/or transverse imperfections
GOST 21153.7-1975 Rocks. Method for determination of elastic longitudinal and diametrical waves rate spreading

British Standards Institution (BSI)

BS EN ISO 10893-11:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN ISO 10893-11:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 10246-9:2000 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 13036-6:2008 Road and airfield surface characteristics — Test methods — Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
BS EN ISO 10893-10:2011 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

ESDU - Engineering Sciences Data Unit

ESDU 67032 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges simply-supported.)
ESDU 68033 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges clamped.)
STRUCT 07.03.01 A-1974 Sandwich panels with corrugated core and equal face plates. Transverse shear stiffness.

International Telecommunication Union (ITU)

ITU-T G.696.1-2010 Longitudinally compatible intra-domain DWDM applications

GOSTR

GOST ISO 10893-10-2017 Seamless and welded steel tubes. Part 10. Automated full peripheral ultrasonic testing for the detection of longitudinal and/or transverse imperfections

ZA-SANS

SANS:5557 Bending tests (longitudinal, transverse, and edgewise) on copper strip or sheet
SANS 5557:2009 Bending tests (longitudinal, transverse and edgewise) on copper strip or sheet

KR-KS

KS B ISO 10893-11-2023 Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
KS B ISO 10893-11-2018 Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections

YU-JUS

JUS H.N8.250-1989 Testing of paper and board. Determination of machine and cross directi- on

European Committee for Standardization (CEN)

EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
CEN EN 13036-6-2008 Road and airfield surface characteristics — Test methods — Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
EN ISO 10893-11:2011/A1:2020 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptanc

GSO

BH GSO ISO 10893-11:2016 Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections

German Institute for Standardization

DIN EN ISO 10893-11:2020-10 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020); German version EN ISO 10893-11:201...
DIN EN 13036-6:2008-06 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges; German version EN 13036-6:2008
DIN EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges; English version of DIN EN 13036-6:2008-06
DIN 6360:1983 Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive
DIN EN 13827:2004-07 Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords; German version EN 13827:2003

Danish Standards Foundation

DS/EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
DS/EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges

GOST

GOST R 70571-2022 I-beam steel welded structures with transverse corrugated wall for constructions. Assortment

Lithuanian Standards Office

LST EN 13036-6-2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
LST EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)

AENOR

UNE-EN 13036-6:2008 Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges

ES-UNE

UNE-EN ISO 10893-11:2011/A1:2021 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of accept...

National Aeronautics and Space Administration (NASA)

NASA NACA-ARR-L6A05-1946 Charts for critical combinations of longitudinal and transverse direct stress for flat rectangular plates

PL-PKN

PN-EN ISO 10893-11-2011/A1-2021-01 E Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections -- Amendment 1: Change of ultrasonic test frequency; change of accepta

American Society of Mechanical Engineers (ASME)

ASME SEC II A SA-435/SA-435M-2001 Specification for Straight-Beam Ultrasonic Examination of Steel Plates ASTM A435/A435M-90

CZ-CSN

CSN 01 5028 Cast.2-1988 Non-destructive testing. Ultrasonic testing of seamless steel tubes. Delection of longitudinal defects
CSN 01 5028 Cast.3-1988 Non-destructive testing. Ultrasonic testing of seamless steel tubes. Determination of transverse defects

Others: wave transverse longitudinal wave