screw gas phase

screw gas phase, Total:137 items.

The international standard classification for "screw gas phase" includes: Cylinders , Pressure vessels, gas cylinders , Braking systems , Road vehicle tyres , Inch screw threads , Tyres in general , Photographic equipment. Projectors .

The Chinese standard classification for "screw gas phase" includes: Hydraulic and pneumatic device , Gas separation and liquefaction equipment , Pressure vessel , Braking system , Tyre , Valve , Takeoff and landing devices , Fasteners , Basic standards and general methods , Camera and photograph instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8336-2011 Special thread gauges for gas cylinders
GB/T 14171-1993 vehicles－Pneumatic braking systems - Tapped holes and male fittings
GB 8335-2011 Special threads for gas cylinders
GB 9765-2009 Tyre valve threads
GB 8335-1998 Special threads for gas cylinders
GB 9765-1997 Tyre valve threads
GB/T 8336-1998 Special thread gauges for gas cylinders
GB/T 14038-1993 Pneumatic fluid power－Cylinders－Bore and port thread sizes
GB/T 10878-2011 Special taps of taper threads for gas cylinders
GB 10878-1999 Speclal taps of taper threads for gas cylinders

Professional Standard - Aviation

HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
HB 0-1-2003 Protrusion of the thread of bolt over the nut and position of the thread of bolt relating to the grip
HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
HB 6135-1987 Special Taper Thread for Gas Cylinder for Aviation
HB 4009-1987 Reference plug gauge of taper thread pitch diameter screw thread ring gauge exclusively used for gas cylinders
HB 4-122-1979 Aircraft Valve and Valve Core Threaded

未注明发布机构

AS 2473.2:2015(R2020) Valves for compressed gas cylinders - Outlet connections (threaded) and stem (inlet) threads
DIN 65208 E:2014-09 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
AS 2473.2:2015/Amdt 1:2020 Valves for compressed gas cylinders - Outlet connections (threaded) and stem (inlet) threads
DIN 76-3 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 8335-2011 Special threads for gas cylinders
GB/T 9765-2009 Tyre valve threads

Taiwan Provincial Standard of the People's Republic of China

CNS 4108-1977 Coupling Threads for Hydraulic or Pneumatic Piping (Pipe Threads)
CNS 8233-1991 Tyre Valve Thread for Automobiles

Professional Standard - Machinery

JB/T 8249.2-1999 Tripod connections for cameras
JB/T 6377-1992 Pneumatic Type and Dimensions of Gas Port Connection Screw Thread

工业和信息化部

HG/T 5449-2018 Tire valve thread gauge

Professional Standard-Ships

CB 3022-1994 External thread air signal safety valve
CB/T 3022-2013 External thread air signal safety valve

IT-UNI

UNI 339-1966 Gas pipe threads for sealing threaded fixtures on gas pipes and related threaded connections
UNI 4649-1961 Thread span milling cutter. Weishi thread and gas pipe thread
UNI 4651-1961 Span milling cutter with cylindrical handle thread. Weishi thread and gas pipe thread
UNI 4652-1961 Thread span milling cutter with Morse taper handle. Weishi thread and gas pipe thread
UNI 4653-1961 Thread span milling cutter with Morse taper handle. Weishi thread and gas pipe thread
UNI 338-1966 Cylindrical gas pipe threads for non-sealing connections on threads
UNI 2212-1954 Low hexagon nuts for ships, gas pipe threads

German Institute for Standardization

DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
DIN 7756:1979 Valves for Vehicle Tyres; Valve Screw Threads; Theoretical Values, Limiting Dimensions of Screw Threads
DIN 76-2:1984 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN ISO 6410-1:1993-12 Technical drawings; screw threads and threaded parts; general conventions; identical with ISO 6410-1:1993
DIN 8535:1970 Pneumatic tools, screw nozzle tips
DIN 65208:2016-11 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 65208:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 65349:2001-06 Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
DIN 7756:1979-02 Valves for Vehicle Tyres; Valve Screw Threads; Theoretical Values, Limiting Dimensions of Screw Threads
DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
DIN 65358:2016-12 Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
DIN 65358:2011 Aerospace - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
DIN 7965:1965-09 Screwed Inserts (Screw Plugs)
DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
DIN 7965:1965 Screwed Inserts (Screw Plugs)
DIN 7998:1975 Threads and Thread Ends for Wood Screws
DIN 65358:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts
DIN 7998:1975-02 Threads and Thread Ends for Wood Screws

BR-ABNT

ABNT NB-171-1973 Markings related to bolts, nuts and threads

Korean Agency for Technology and Standards (KATS)

KS B ISO 7180-2006(2011) Pneumatic fluid power－Cylinders－Bore and port thread sizes
KS R ISO 4570:2008 Tyre valve threads
KS R ISO 4570:2018 Type valve threads
KS B ISO 16030:2013 Pneumatic fluid power－Connections－Ports and stud ends
KS B ISO 16030:2004 Pneumatic fluid power-Connections-Ports and stud ends

Association Francaise de Normalisation

NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
NF R99-030*NF ISO 4570:2004 Tyre valve threads
NF E87-012:1977 VALVES FOR TYRES.THREADS.
NF E03-163:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.
NF E03-162:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.
NF E03-165:1984 Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).
NF L05-020:1954 Screw threads. Thread run-outs (rech.).
NF R99-030:1978 VALVES FOR ROAD VEHICLE TYRES. THREADS.

Standard Association of Australia （SAA）

AS 2473.2:2007 Valves for compressed gas cylinders - Outlet connections (threaded) and stem (inlet) threads
AS 1722.2:1992 Pipe threads of Whitworth form - Fastening pipe threads
AS 2473:1990 Valves for compressed gas cylinders (threaded outlet)
AS 3635:1990 Unified (ISO inch) screw threads, associated gauges, and gauging practice

RO-ASRO

STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions
STAS 8956-1971 CIRCULAR SCREWING DIES FOR GAS-PIPE THREAD WITHOUT THREAD TIGHTENING Dimensions

International Organization for Standardization (ISO)

ISO 4570-2:1979 Tyre valve threads; Part 2 : Threads 9V1, 10V2, 12V1, 13V1
ISO 4570-3:1980 Tyre valve threads; Part 3 : Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
ISO 4570:2002 Tyre valve threads
ISO 4570-1:1977 Tyre valve threads; Part I; Threads 5V1, 5V2, 6V1 and 8V1
ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces

CH-SNV

SN 210 318-1982 Technical drawings — Protective marks
SNV 95854-1950 Gas cylinder valve. Thread
SN 029 100-1983 This standard is a translation of the original bilingual (German/French) Swiss Standard
SN 640 758 c-1988 Tension pulley for trachea thread
VSM 12041-1967 Thread grooves for external and internal threads. Metric ISO thread and Metric ISO fine thread

Danish Standards Foundation

DS 729:1956 Gas cylinders. Tapered cylinder thread
DS/ISO 7180:1989 Pneumatic fluid power. Cylinders. Bore and port thread sizes

CZ-CSN

CSN 01 4033-1985 Cylindrícal pipe threads for gas tubes and screwed fittings
CSN 01 4354-1966 Pipe threads for.gas list tubes and sc.rewed fittings - tolerance s
CSN 13 7455-1960 Thread connection for gas hoses
CSN ON 22 3214-1968 Tapered thread pipe thread
CSN 01 4009-1964 Metric thread - assortment for production thread and thread gauge
CSN 25 4015 Za-1987 Revision a- 3/1987 Serial No. 25 4015 Limit Thread Diameter. Gas cylinder pipe thread specifications
CSN 02 1005 Cast.5-1984 Bolts, serews and nuts - technical spe-cif ícations. Set serews and similar thread-ed fasteners not under tensile stresses
CSN ON 22 3213-1967 Circular threaded tooth plate. Thread
CSN 01 4031-1981 Threads for side connections of gas cylinders closing valves

Compressed Gas Association (U.S.)

CGA SB-19-2013 Potential valve thread and cylinder thread mismatch
CGA TB-16-2010 Recommended coding system for threaded cylinder outlets and threaded valve inlets

TR-TSE

TS 1992-1975 SCREWS FOR ELECTRIC CONTACT SET WITH METRIC THREAD

Defense Logistics Agency

DLA MS18196 REV F (1)-2013 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
DLA MS18196 REV E REINST NOTICE 4-2009 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
DLA MS18195 REV C-2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE
DLA MS18194 REV D REINST NOTICE 4-2009 JACKSCREW, ELECTRICAL CONNECTOR MALE AND FEMALE, LONG, TURNABLE
DLA A-A-59440/7 B-2012 VALVE, SHUT-OFF, SCREW STEM, THREADED TYPE, 150 PSI, BRASS, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS
DLA MIL-DTL-32372/1-2011 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
DLA MS28050 REV B-2005 VALVE, CHECK, LOW PRESSURE, INTERNAL THREADS
DLA MS27567 REV A-2013 DUMMY, CONNECTOR, ELECTRICAL, MALE
DLA MIL-DTL-32372/11-2011 FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE TO FEMALE RUN TO RUN
DLA MIL-DTL-32372/3-2011 FITTING, ADAPTER, 90?ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE

KR-KS

KS R ISO 4570-2018 Type valve threads

GSO

GSO ISO 4570:2008 Tyre Valve Threads
OS GSO ISO 4570:2008 Tyre Valve Threads

HU-MSZT

MSZ 1056/2-1985 thread, electric light, plane

PL-PKN

PN M69226-1963 Gas cylindres. Me?ric conical thread

SE-SIS

SIS SS 2235-1989 Gas cylinders — Valve stem and cylinder neck threads for gas cylinders
SIS SS-ISO 4039:1979 Road vehicles — Pneumatic braking systems — Pipes, tapped holes and male fittings

European Committee for Standardization (CEN)

prEN 20049-1-1991 Malleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1

SCC

BS 143:1952 Malleable cast iron and cast copper alloy for steam, air, water, gas and oil screwed b.s.p. taper thread or API line pipe thread
DIN 65208 E:2014 Draft Document - Aerospace series - Testing of locking torques for nuts and related threaded parts, with MJ thread - Test bolts
AS 2473:1996 Valves for compressed gas cylinders (threaded outlet)
UNE 26177:1985 ROAD VEHICLES - PNEUMATIC SISTEMS. PIPES, TAPPED AND MALE FITTINGS.
MIL MIL-DTL-45916C-2014 Insert, Screw Thread - Thread Cutting and Thread Forming
MIL MIL-DTL-32372/1B-2018 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
AS B201:1962 Rolled sheet metal screw threads and associated threads in moulded plastics and die-cast materials for general purposes
AS 2473:1981 Valves for compressed gas cylinders (threaded outlet)
AS 2473:1985 Valves for compressed gas cylinders (threaded outlet)
BS 1618:1949 Camera lenses and lens attachments (dimensions and screw threads)

IN-BIS

IS 9449 Pt.3-1985 Tire Valve Thread Dimensions Part 3 Threads 10V1, 15V1, 17V1 and 20V1
IS 9449 Pt.1-1980 Tire valve thread dimensions Part I Threads 5V1, 5V2, 6V1 and 8V1

AT-ON

ONORM M 2047-1979 Pneumatic cylinders; sequence of piston rod threads
ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1530-1979 Thread and thread endsfor wood screws

BSI

BS 34:1906 Screw threads and pipe threads
BS 34:1908 Screw threads and pipe threads
BS 34:1910 Screw threads and pipe threads

U.S. Military Regulations and Norms

ARMY MIL-I-45916 B-1975 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING

British Standards Institution (BSI)

BS EN ISO 6410-2:1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts