Gene Forward and Reverse

Gene Forward and Reverse, Total:199 items.

The international standard classification for "Gene Forward and Reverse" includes: Farming and forestry in general , Protection against crime , Air transport , Laboratory medicine , Other standards related to protection of and in buildings .

The Chinese standard classification for "Gene Forward and Reverse" includes: Plant quarantine, pest control , Papermaking in general , Combination grippers , Crime judging technology , Projection equipment and its accessory , AGS system and equipment , Medical laboratory equipment , Coal mine special equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19495.5-2018 Detection of genetically modified organisms and derived products—Quantitative real-time polymerase chain reaction(PCR)methods
GB/T 450-2008 Paper and board－Sampling for testing and identification of machine and cross direction wire side and felt side

Group Standards of the People's Republic of China

T/QGCML 3989-2024 Ultrasonic water meter based on NFC reverse charging
T/CATIS 015-2023 Guidelines for on-line reverse factoring
T/JJSY 012-2022 Technical specification for general materials for reverse umbrellas
T/CAB 0363-2024 Design and construction method for vector for CRISPR/Cas9-based targeted transcriptional activation in plants

Taiwan Provincial Standard of the People's Republic of China

CNS 9216-1982 Grooved Pins, Half Length Reverse Grooved

Hunan Provincial Standard of the People's Republic of China

DB43/T 3133-2024 Technical procedures for screening rice nuclear radiation targeted gene mutations

Professional Standard - Aviation

HB 1378-1984 Tangential round base plate
HB 4305-1989 Square Supporting Guide Plate
HB 1281-1987 Square Guide Bearing
HB 3957-1987 Single Groove Square Guiding Bearing
HB 2657-1976 Radial Turning Tool Adjustable Tool Holder
HB 1545-1987 Square Guide Bearing

Professional Standard - Public Safety Standards

GA 540-2005 Forensic coxial photography apparatus
GA/T 540-2021 Forensic coaxial photography apparatus

Professional Standard - Electron

SJ/T 2658.3-2015 Measuring method for semiconductor infrared-emitting diode - Part 3: Reverse voltage and reverse current
SJ 1787-1981 Method of measurement for rated peak working reverse voltage and reverse current of silicon single phase bridge rectifiers,up to 5A

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3983-2021 Pump station reverse power generation technical specification

Professional Standard - Machinery

JB/T 9478.12-1999 Measuring methods of photocell-Inverse breakdown voltage
JB/T 7471-1994 Directional Reflection Screen for Process Cinematography
JB/T 13114-2017 Single/double-action indirect horizontal aluminium extrusion press

Professional Standard - Civil Aviation

MH/T 6035-2018 Taxiway edge retro-reflective marker
MH/T 6035-2005 Taxiway edge retro-reflective marker

Military Standard of the People's Republic of China-General Armament Department

GJB 5269-2003 Specification for orthogonal three-way pyramidal fabrics

Professional Standard - Post and Telecommunication

YD/T 2280-2011 Technical Requirements Based on Terminal Power Over Ethernet (TPoE) for Access Network Equipment

Professional Standard - Medicine

YY/T 1303-2015 Nucleic acid amplification reverse dot blot reagent(kit)

Professional Standard - Coal

MT/T 841-1999 Steel thin-walled and reverse air door

National Metrological Verification Regulations of the People's Republic of China

JJG(化工) 14-1989 Verification Regulations for Isolators, Inverters, and Boosters

Ente Nazionale Italiano di Unificazione

UNI 7671:1977 Butt welded joints in ferrous metal and nickel alloys. Transverse face and root bend test.
UNI 7672:1977 Butt welded joints in ferrous metal and nickel alloys. Longitudinal face and root bend test.
UNI ISO 5413:1981 Machine tools. Positive drive of morse tapers.
UNI 7671-1977 Head-to-head welding casing made of iron and nickel alloy materials. Front and back transverse bending tests

Korean Agency for Technology and Standards (KATS)

KS B ISO 9533:2012 Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
KS B ISO 9533-2012(2022) Earth-moving machinery－Machine-mounted forward and reverse audible warning alarm－Sound test method
KS R 5070-2004(2009) Back-up lamp switches for automobiles
KS R 5074-1998(2008) Back-up lamp switches for automobiles
KS A 3513-1997 Retroreflectors-Optical properties-Vocabulary
KS A 3513-2020 Retroreflectors — Optical properties — Vocabulary
KS A 3513-2015(2020) Retroreflectors — Optical properties — Vocabulary
KS A 3513-2015 Retroreflectors — Optical properties — Vocabulary
KS A 3514-1997 Retroreflectors-Optical properties-Measuring method
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS A 3514-2015 Retroreflectors — Optical properties — Measuring method
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test

CZ-CSN

CSN ISO 9533:1993 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method
CSN 42 0422-1983 Reverse bend testing of wire
CSN 35 8738-1964 Transistore. Measurement of reverse voltages
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 35 8775-1987 Light-emitting diodes. Noise measurement in forward direction
CSN ISO 9649:1994 Metallic materials. Wire. Reverse torison test
CSN ON 27 3525-1963 Cable carriage movement for single-sided cables. reverse

Society of Automotive Engineers (SAE)

SAE AIR6064 Reverse Thrust
SAE AIR6064-2018 Reverse Thrust
SAE AMS1540C-2008 Cleaner, Thrust Reverser Water-Base
SAE AMS1540B-1992 Cleaner, Thrust Reverser, Water Base
SAE AMS1545B-2008 Cleaner, Thrust Reverser Alkaline, Water-Base
SAE AMS1545A-1992 Cleaner, Thrust Reverser Alkaline, Water-Base
SAE J/ISO 9533-2003 Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method Identical to ISO 9533:1989; Superseding SAE J1446
SAE J326-2020 Nomenclature-Hydraulic Backhoes
SAE J326-1986 Nomenclature Hydraulic Backhoes
SAE J326-1980 Nomenclature - Hydraulic Backhoes
SAE J326-2018 Nomenclature - Hydraulic Backhoes
SAE J326-2012 Nomenclature Hydraulic Backhoes
SAE J49-2012 Specification Definitions - Hydraulic Backhoes
SAE J49-1980 Specification Definitions Hydraulic Backhoes
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD
SAE AS95234/6A-2023 CONNECTOR, PLUG, REVERSE BAYONET COUPLING
SAE AS95234/6-2014 CONNECTOR@ PLUG@ REVERSE BAYONET COUPLING
SAE J2838_201303 Full Adaptive Forward Lighting Systems
SAE AS95234/6-2020 CONNECTOR, PLUG, REVERSE BAYONET COUPLING
SAE AS95234/6A CONNECTOR, PLUG, REVERSE BAYONET COUPLING
SAE AS95234/6 CONNECTOR, PLUG, REVERSE BAYONET COUPLING
SAE J2838_202003 Full Adaptive Forward Lighting Systems
SAE AS95234/4-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, FRONT, WITH ACCESSORY THREAD
SAE AS95234/2A-2023 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS85731/1B-2015 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
SAE AS85731/1A-2011 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
SAE AS85731/1-2004 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
SAE AS95234/9-2020 CONNECTOR, PLUG, REVERSE BAYONET COUPLING, GROUNDING
SAE AS95234/7 Connector, Receptacle, Reverse Bayonet Coupling, Jam Nut
SAE AS95234C Connectors, Electrical, Reverse Bayonet, General Specification for
SAE AS95234B Connectors, Electrical, Reverse Bayonet, General Specification for
SAE AS95234D-2024 Connectors, Electrical, Reverse Bayonet, General Specification for
SAE AS95234C-2023 Connectors, Electrical, Reverse Bayonet, General Specification for
SAE AS95234/9-2014 CONNECTOR@ PLUG@ REVERSE BAYONET COUPLING@ GROUNDING
SAE AS95234A Connectors, Electrical, Reverse Bayonet, General Specification for

IETF - Internet Engineering Task Force

RFC 5496-2009 The Reverse Path Forwarding (RPF) Vector TLV
RFC 7891-2016 Explicit Reverse Path Forwarding (RPF) Vector
RFC 8500-2019 IS-IS Routing with Reverse Metric
RFC 3024-2001 Reverse Tunneling for Mobile IP@ revised
RFC 2390-1998 Inverse Address Resolution Protocol (Obsoletes: 1293)
RFC 2864-2000 The Inverted Stack Table Extension to the Interfaces Group MIB

International Telecommunication Union (ITU)

ITU-T Q.86.4-1997 Stage 2 Description for Charging Supplementary Services: International Freephone Service (IFS) - Series Q: Switching and Signalling Functions and Information Flows for Services in the ISDN - Supplementary Services Study Group 11; 22 pp
ITU-T Q.86-1993 Stage 2 Description for Charging Supplementary Services Clause 3 - Reverse Charging (REV) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group XI
ITU-T Q.86-1995 Stage 2 Description for Charging Supplementary Services Clause 7 - International Telecommunication Charge Card (ITCC) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group 11
ITU-T I.256. 3-1992 Reverse Charging (Study Group I) 13 pp
ITU-T I.256.3 FRENCH-1992 Reverse Charging (Study Group I) 13 pp
ITU-T I.256.3 SPANISH-1992 Reverse Charging (Study Group I) 13 pp
ITU-T I.256.3-1992 Reverse Charging (Study Group I) 13 pp

American Water Works Association (AWWA)

AWWA MTC64608 Dewatering Reverse Osmosis Concentrate Using Forward Osmosis

American Society for Testing and Materials (ASTM)

ASTM D4993-89(2003) Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM D4993-89(1998)e1 Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM E1709-00e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
ASTM E808-23 Standard Practice for Describing Retroreflection
ASTM E1709-00 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
ASTM RR-E12-2000 2020 E0810-Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM D4993-08 Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM E808-01 Standard Practice for Describing Retroreflection

Standard Association of Australia （SAA）

AS 1906.3:1992 Retroreflective materials and devices for road traffic control purposes - Raised pavement markers (retroreflective and non-retroreflective)

SE-SIS

SIS 11 26 27-1965 Reverse bend testing of reinforcing steel bar
SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing
SIS 11 26 22-1969 Reverse bend testing of wire

PL-PKN

PN T01504-59-1987 Diodes Measurement of the settling time of the reverse current trr and the reverse current I after pulse switching

PK-PSQCA

PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE

Association Francaise de Normalisation

NF A49-862:1988 Steel tubes. Straightening test on tubular half-ferrule.

ET-QSAE

ES G.B8.311-1973 Steel wire reverse bending test

Magyar Szabványügyi Testület

MNOSZ 18266-1956 Salesman's desk (reverse)
MSZ 3824-1958 Hammer with gear and reverse disc
MI 4300/7-1983 Metal welding concept detecting reverse welding

British Standards Institution (BSI)

BS EN ISO 8741:1998(2008) Grooved pins — Half - length reverse - taper grooved
BS 2G 196:1971 Specification for static invertors
BS EN 16246:2012 Agricultural machinery. Backhoes. Safety
BS PD IEC TR 62316:2003 Guidance for the interpretation of OTDR backscattering traces
BS PD IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces
BS AU 145e:2018 Specification for retroreflecting number plates
BS AU 145d:1998 Specification for retroreflecting number plates
BS ISO 7801:2024 Metallic materials. Wire. Reverse bend test
BS ISO 9649:2023 Metallic materials. Wire. Reverse torsion test

German Institute for Standardization

DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
DIN 74069:1996 Retro-reflective registration plates for motor vehicles and trailers
DIN SPEC 50300:2013-03 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
DIN ISO 9649:2018-01 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10

ZA-SANS

VC 8062-1998 Retro-reflective number plates for motor vehicles

Association for Electrical, Electronic & Information Technologies (VDE)

VDE-AR-E 2715-3-2012 Vorwaertsspannung-Binning von LEDs

Japanese Industrial Standards Committee (JISC)

JIS B 7166:1983 Reflector for 35 mm motion-picture projectors
JIS Z 4818:1984 Reducing materials for back scattering X-rays
JIS Z 4816:1975 Back scattering X-ray reducing paints

North Atlantic Treaty Organization Standards Agency

STANAG 1041-2001 ANTI-SUBMARINE EVASIVE STEERING - ATP-3(B)

RO-ASRO

STAS 11342-1979 ANIONIC ASPHALTIC EMULSION WITH SLOW BRF.AKING I FOR HYDROINSULATIONS
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 1177-1974 Tests of metals REVERSE BEND TESTING OF STEEL WIRES

TH-TISI

TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

Gosstandart of Russia

GOST R 50708-1994 Wire. Reverse torsion test
GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time

The American Road & Transportation Builders Association

AASHTO T 257-96(R2018) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
AASHTO T 257-1996(2013) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
AASHTO TP 111-2014 Standard Method of Test for Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit

U.S. Military Regulations and Norms

ARMY A-A-50037 B-1993 GRIDDLES, SELF HEATING, GAS, COUNTER OR STAND MOUNTED

International Organization for Standardization (ISO)

ISO 144:1973 Steel - Reverse bend testing of wire
ISO 7801:2024 Metallic materials — Wire — Reverse bend test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test

AASHTO - American Association of State Highway and Transportation Officials

T 257-1996 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
TP 111-2014 Standard Method of Test for Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit
T257-1996 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices (Twentieth Edition)
T257-1986 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices (Eighteenth Edition)

GCC Standardization Organization

GSO EN 12729:2024 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
GSO IEC/TR 62316:2014 Guidance for the interpretation of OTDR backscattering traces
GSO ISO 5413:2016 Machine tools -- Positive drive of Morse tapers
GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ASTM C1224:2024 Standard Specification for Reflective Insulation for Building Applications
GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test

Defense Logistics Agency

DLA SMD-5962-90675 REV B-2004 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW-POWER SCHOTTKY, TTL, 9-BIT BUS INTERFACE FLIP-FLOPS WITH THREE-STATE OUTPUTS, AND INVERTING AND NON-INVERTING OUTPUTS, MONOLITHIC SILICON

Association of German Mechanical Engineers

VDI-Berichte 1464:1999 Counter-flow laminar heat exchangers are the basic components of a high-efficiency WRG system.

AIA/NAS - Aerospace Industries Association of America Inc.

NASM23964-2000 Bolt@ Self-Retaining@ Positive Locking
NASM23964-2011 BOLT@ SELF-RETAINING@ POSITIVE LOCKING (Rev 1)

Spanish Association for Standardization (UNE)

UNE 48060:1982 45-DEGREE, 0-DEGREE DIRECTIONAL REFLECTANTE (DAYLIGHT)
UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.

ESDU - Engineering Sciences Data Unit

ESDU 81002-1981 RADIAL@ MIXED AND AXIAL-FLOW PUMPS. CONVERSION FACTORS
ESDU 81002 A-2007 Radial@ mixed and axial-flow pumps. Conversion factors.

American National Standards Institute （ANSI)

ANSI/NSF 58(i50)-2008 Reverse osmosis drinking water treatment systems
ANSI C78.379-2006 Electric Lamps – Classification of the Beam Patterns of Reflector Lamps

Danish Standards Foundation

DANSK DS/IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces
DS/IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces

American Association

ASSE 1004-2017 Commercial Dishwasher Reverse Flow Requirements

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC/TR 62316:2014 Guidance for the interpretation of OTDR backscattering traces
OS GSO ISO 5413:2016 Machine tools -- Positive drive of Morse tapers
OS GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test
OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test

NATO - North Atlantic Treaty Organization

STANAG 1041-1997 Anti-Submarine Evasive Steering - ATP-3(B) (ED 14)
STANAG 1041-1998 Anti-Submarine Evasive Steering - ATP-3(B) (ED 15)

CU-NC

NC 09-120-1968 Punch and die upper and lower base plates for molds

Indonesia Standards

SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 07-3807-1995 Reverse bend test method for butt-welded joints

Bureau of Indian Standards

IS 1716-2023 Metallic Materials Wire Reverse Bend Test

National Aeronautics and Space Administration (NASA)

NASA NACA-RM-L57E24 REV A-1957 Some factors affecting the static longitudinal and directional stability characteristics of supersonic aircraft configurations

South African Bureau of Standard

SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 62316:2007 Guidance for the interpretation of OTDR backscattering traces

Swedish Institute for Standards

SS 112622:1983 Metallic materials - Wire - Reverse bend test

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 173-1959 Standards on Navigation Aids: Direction Finder Measurements (Correction)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 9649:2016 Metallic materials -- Wire -- Reverse torsion test

Aerospace Industries Association

AIA NASM23964-2000 Bolt, Self-Retaining, Positive Locking FSC 5306

Standards New Zealand

NZS 5441.1:1987 Lighting and Retroreflectors for Pedal Cycles Part 1: Specification for Lamp Units and Retroreflectors Suitable for Fitting to Pedal Cycles