curve deviation

curve deviation, Total:42 items.

The international standard classification for "curve deviation" includes: Measuring instruments .

The Chinese standard classification for "curve deviation" includes: Basic standards and general methods .

Professional Standard - Aviation

T/TMHIA 022-2024 Technical Specification of the curve beam bridge rectification in Tianjin

JC/T 2658-2022 Test method for 3D deviation ofcurved glass -- Laser scanning method

GB/T 24637.4-2020 Geometrical product specifications(GPS) -General concepts -Part 4: Gicometrical characteristics for quantifying GPS deviations

DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN 3962-2:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations
DIN 3965-4:1986 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
DIN 513-3:2020-12 Metric buttress threads - Part 3: Deviations and tolerances
DIN 513-3 E:2019-07 Metric buttress threads - Part 3: Deviations and tolerances

UNI 4630-1970 Hot rolled steel buckling plate. Dimensions and deviations
UNI 472-1970 Square wire steel pole with h11 deviation. Dimensions and deviations
UNI 471-1970 Hexagonal wire steel rod with h10 deviation. Dimensions and deviations
UNI 470-1970 Hexagonal wire steel rod with h11 deviation. Dimensions and deviations
UNI 3976-1989 Technical drawings. Deviation symbols for lines and angles
UNI 3141-1966 Regulations for railway lines. Types, sizes and deviations
UNI 468-1970 Round steel rod with h11 deviation. Dimensions and deviations

SNV 81057-1958 Horizontal drop curve
VSM 14331-1949 When the drop of the inclined line is large, the longitudinal drop decreases curve

NF EN ISO 13015:2013 Woven fabrics - Deformation - Determination of angular deviation and bending

KS D 0259-2022 Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS B 0420-2015 Deviations for Center Distances

NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
NS 1558:1966 ISO tolerances and fits — Shaft tolerances — Selection for general purposes
DIN 513-3 E:2019 Draft Document - Metric buttress threads; deviations and tolerances
VDI/VDE 2631 BLATT 6-2016 Form measurement technology — Determination of straight guide deviations

ARMY MIL-C-48471 B VALID NOTICE 1-1987 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B NOTICE 4-1997 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B-1981 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B (2)-1998 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B REINST NOTICE 3-1996 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE

VDI/VDE 2631 Blatt 6-2001 Formpruefung - Bestimmung der Geradfuehrungsabweichungen
VDI/VDE 2631 BLATT 6-2015 Formmesstechnik - Ermittlung der Geradfuehrungsabweichungen

VDI/VDE 2631 Blatt 6-2005 Form measurement - Determination of the straightness deviation of the linear guide

PN S83200-1968 Threads for valves of air tubes Dimensions and limiting deviations

AERO C.01.01.04 A-1980 Effect of gap on the slope of lift curve and slope of lift increment curve due to control surface deflection.

ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances

JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)

ONORM M 6771-1995 Deviations of centre distance and parallelism tolerances for axes of cases for cylindrical gears