pm2.5 test 80

pm2.5 test 80, Total:76 items.

The international standard classification for "pm2.5 test 80" includes: Geology. Meteorology. Hydrology .

The Chinese standard classification for "pm2.5 test 80" includes: Meteorology , Measuring devices .

National Metrological Technical Specifications of the People's Republic of China

JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments

Professional Standard - Meteorology

QX/T 476-2019 Observation specifications for aerosol PM10 and PM2.5 mass concentration-β-ray method
QX/T 173-2012 Monitoring Method of PM10/PM2.5/PM1 with GRIMM 180

Group Standards of the People's Republic of China

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/ACEF 097-2023 Technical requirements and monitoring specifications for cruise monitoring system of metallic elements in PM2.5
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard

Professional Standard - Energy and Power Planning

DL/T 1520-2016 Test Specification of Flue Gas Fine Particulate Matter (PM2.5) In Coal-Fired Power Plant—Weight Method

Professional Standard - Environmental Protection

HJ 656-2013 Technical Specifications for gravimetric measurement methods for PM2.5 in ambient air
HJ 653-2013 Specifications and Test Procedures for Ambient Air Quality Continuous Automated Monitoring System for PM10 and PM2.5
HJ 1100-2020 Technical guide for automatic monitoring by beta ray method for particulate matter in ambient air (PM10 and PM2.5)
HJ 1264-2022 Technical guideline for fine particulate matter (PM2.5) monitoring based on satellite remote sensing
HJ 93-2013 Specifications and Test Procedures for PM10 and PM2.5 Sampler
HJ 618-2011(XG1-2018) The Gravimetric Method for Determination of PM10 and PM2.5 in Ambient Air "No. 1 Amendment"

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 45795-2025 Determination of PM10/PM2.5 mass concentration in atmosphere—Light scattering method

Henan Provincial Standard of the People's Republic of China

DB41/T 2387-2023 Atmospheric PM2.5 component observation station operation quality management technical specification

Professional Standard - Aviation

HB 3283-1989 Ergometer（50~100N80~260N200~500N）

未注明发布机构

DVGW VP 302:2006-06 Natural gas sealing valve arm devices (PE 80 and PE 100) Requirements and tests

Lithuanian Standards Office

LST EN 60068-2-80-2005 Environmental testing. Part 2-80: Tests. Test Fi: Vibration. Mixed mode (IEC 60068-2-80:2005)
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Spanish Association for Standardization (UNE)

UNE-EN 60068-2-80:2006 Environmental testing -- Part 2-80: Tests - Test Fi: Vibration - Mixed mode (IEC 60068-2-80:2005)
AENOR UNE-CEN/TS 16450 EX:2014 Ambient air. Automatic measurement systems for measuring the concentration of particulate matter (PM10; PM2.5).
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

International Organization for Standardization (ISO)

ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration

Society of Automotive Engineers (SAE)

SAE AMS3217/3C-2015 Test Slabs@ Chloroprene (CR) 70 - 80
SAE AMS3217/3C Test Slabs, Chloroprene (CR) 70 - 80
SAE AMS3217/3D Test Slabs, Chloroprene (CR), 70 - 80
SAE AMS3217/3D-2021 Test Slabs, Chloroprene (CR) 70 - 80

Swedish Institute for Standards

SS-EN 60068-2-80:2005 Environmental testing - Part 2-80: Tests - Test Fi: Mixed mode
SS-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
SS-ISO 25597:2013 Stationary source emissions - Test Method for Determining PM2.5 and PM10 Mass in Stack Gases using Cyclone Samplers and Sample Dilution (ISO 25597:2013, IDT)
SS-ISO 16000-37:2020 Indoor air - Part 37: Measurement of PM2,5 mass concentration (ISO 16000-37:2019, IDT)
SS-EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
SS-EN 12341:1998 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
SS-EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Association Francaise de Normalisation

NF EN 60068-2-80:2005 Essais d'environnement - Partie 2-80 : essais - Essai Fi : vibrations - Mode mixte
FD CEN/TR 16269:2011 Ambient air - Guide for measuring anions and cations in the PM2.5 fraction
NF EN 16450:2017 Ambient air - Automated systems for measuring the concentration of particulate matter (PM10;PM2.5)
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
NF EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF X43-049*NF EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Danish Standards Foundation

DS/EN 60068-2-80:2006 Environmental testing – Part 2-80: Tests – Test Fi: Vibration - Mixed mode
DANSK DS/EN 60068-2-80:2006 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

Korean Agency for Technology and Standards (KATS)

KS C IEC 60068-2-80-2020 Environmental testing－Part 2-80：Tests－Test Fi：Vibration－Mixed mode
KS F 2580-2007 Test method of the immersion expansion in 80 ℃water of the iron and steel slag
KS I ISO 13271-2024 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors

Comitato Elettrotecnico Italiano

CEI EN 60068-2-80:2007 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

GCC Standardization Organization

GSO IEC 60068-2-80:2015 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
GSO ISO 25597:2015 Stationary source emissions -- Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

British Standards Institution (BSI)

PD CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2@5
BS EN 60068-2-80:2005 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

Bureau of Indian Standards

IS 5182-24-2019 Methods for Measurement of Air Pollution Part 24 Fine Particulate Matter ( PM2.5 )

German Institute for Standardization

DIN EN 60068-2-80:2006-05 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode (IEC 60068-2-80:2005); German version EN 60068-2-80:2005
DIN EN 60068-2-80:2006 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode (IEC 60068-2-80:2005); German version EN 60068-2-80:2005
DIN EN 16450 E:2015-10 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DIN 8075:2018-08 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN 16450 E:2015 Draft Document - Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2.5); German and English version prEN 16450:2015
DIN 8075 E:2017 Draft Document - Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN EN 14907:2005-11 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2.5 mass fraction of suspended particulate matter

CZ-CSN

CSN 80 0133 Za-1984 Czech Standard 80 0133 Mercerized Stable Coloring Test
CSN 80 0125 Za-1984 Czech Standard 80 0125 Stability test of colorants in strong acids
CSN 80 0126 Za-1984 Czech Standard 80 0126 Stability test of colorants in strong alkali

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-80:2005 Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode

Standards Norway

NS-EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

American Society for Testing and Materials (ASTM)

ASTM RR-D22-2000 2021 D8405-Test Method for Evaluating PM2.5 Sensors or Sensor Systems Used in Indoor Air Applications

CU-NC

NC 66-10-1986 Electronics. "Juvenil 80" Radio Receiver. Testing Methods
NC 30-64-1987 Plastics. Determination of Reactivity at 80°C of NonSaturated Polyester Resins Testing Method

European Committee for Standardization (CEN)

FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Ente Nazionale Italiano di Unificazione

UNI EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3580.9.12:2013 Methods for sampling and analysis of ambient air Determination of suspended particulate matter PM2.5 beta attenuation monitor

Military Standards (MIL-STD)

MIL MIL-T-85053-1977 TEST SET AN/AWM-80 FOR THE AN/AWG-10A MISSILE CONTROL SYSTEM

Others: pm2.5 test,But 80 pm2.5 particles,test pm2.5,Peel force test standard 80,pm2.5 test,pm2.5 test 80