Electron density and use

Electron density and use, Total:174 items.

The international standard classification for "Electron density and use" includes: Environment and environmental protection in general , Aircraft and space vehicles in general , Measurement of volume, mass, density, viscosity , Measurement of force, weight and pressure , Petroleum products in general .

The Chinese standard classification for "Electron density and use" includes: Electrotechnical material and universal parts in general , Standardization and quality management , Basic standards and general methods , Mechanics Measurement , Temperature and pressure instrument , Technical Management , Operating equipment, instrument and meter , Other petroleum products .

Professional Standard - Energy and Power Planning

DL 5270-2012 Test code for density and moisture by nuclear methods
DL/T 5270-2020 Test code of density and moisture for nuclear methods
DL 5270-2012(英文版) Nuclear Method Density and Moisture Content Testing Procedures

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34954.1-2017 Process management for avionics-Electronic components capability in operation-Part 1:Temperature uprating
GB/T 37543-2019(英文版) Measurement method for total electric field strength and ion current density of DC transmission line and converter station
GB/T 39843-2021 Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films
GB/T 21474-2008 Guideline for the assessment on the reuse and recycling system of waste electrical and electronic equipment

National Metrological Verification Regulations of the People's Republic of China

JJG 1023-2007 Verification Regulation of Testing Instrument for Density and Moisture with Nuclear Radiation Method

未注明发布机构

FORD ESB-M4D262-C-2006 POLYURETHANE FOAM, HIGH AND MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (USE WSB-M2D402-A3)
FORD ESF-M4E12-A-2002 PAPER, CONDENSER, LOW DENSITY, ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***

Military Standard of the People's Republic of China-General Armament Department

GJB 360.12-1987 Test methods for electronic and electrical components Sealing test
GJB 765-1989 Tungsten-based high-density alloy ring blank for gyro rotor

Taiwan Provincial Standard of the People's Republic of China

CNS 11901-1987 Dimensions of Racks and Unit Chassis of Electronic Equipment for General Use
CNS 5751-1980 Method of Test for Apparent Density of Ceramics for Electron Device and Semiconductor Application
CNS 3685-1989 Method of Test for Thickness and Apparent Density of Paper and Paperboard
CNS 14314-1999 Method of test for particle density of fine ceramic powder
CNS 6316-1980 Method of Test for Density of Fine Wire and Ribbon for Electronic Devices
CNS 14765-2003 Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels
CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke

National Metrological Technical Specifications of the People's Republic of China

JJF 1866-2020 Calibration Specification for Immersion Oscillation-type Electronic Liquid Density Meters
JJF 2166-2024 Calibration Specification for Electronic Solid Density Balances

Professional Standard - Machinery

JB/T 10892-2008 Electrical SF6 gas density transmitters

Professional Standard - Electron

SJ/T 10226-1991 Methods of determination for density of potassium silicate solution for use in electronic industry
SJ/T 11583-2016 Electronic ceramics and their sealing air tightness testing methods
SJ/T 11033-1996 Test method for density of electronic glass - Sink-float comparator method

Professional Standard - Traffic

JT/T 658-2006 Nuclear density and moisture gauge

Professional Standard - Petrochemical Industry

SH/T 0068-2002 Standard test method for density or relative density of coolant concentrates and engine coolants by the hydrometer

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1916.1-2014 Aramid Ⅲ Fiber Test Method Part 1: Linear Density and Density

Association Francaise de Normalisation

NF S91-272:2011 Dentistry - Brackets and tubes for use in orthodontics.
NF B35-511:1983 Laboratory glassware. Density hydrometers for general purpose. Specifications. Test methods and use.

Gosstandart of Russia

GOST 8.576-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation
GOST 34733-2021 Liquid Petroleum Products. Method of Determining Density, Relative Density, and API Gravity Using a Digital Densitometer
GOST 30361-1996 Seeds of essential oil crops. Methods for determination of pest presence
GOST 16208-1984 High-intensity gas-discharge sources of optical radiation. General specifications
GOST 23785.4-1979 Cord fabric. Method for determination of linear dimensions, density according to warp and welf, surface density
GOST 23785.4-2001 Cord fabric. Method for determination of linear dimensions, density according to warp and weft, surface density
GOST 10878-1970 Textiles. Linear density in tex units and the basic series of linear densities

American National Standards Institute （ANSI)

ANSI/ASTM F542:2007 Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
ANSI A208.2-2009 Medium Density Fiberboard (MDF) for Interior Applications
ANSI/ASTM D3554:2007 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable

American Society for Testing and Materials (ASTM)

ASTM F542-98 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
ASTM F542-02 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
ASTM D1122-13 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM E720-16 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM D7830/D7830M-25 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D5195-08 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM E12-70(1991)e1 Terminology Density and relative density of solids, liquids and gases
ASTM E2971-14 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

GCC Standardization Organization

GSO 1208:2002 Determination of density and relative density of liquids by digtal density meter .
GSO IEC 60115-5:2014 Fixed resistors for use in electronic equipment - Part 5: Sectional specification: Fixed precision resistors
GSO ISO 13145:2013 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
GSO ISO 5311:2009 Fertilizers - Determination of bulk density (tapped)
GSO ISO 6152:2010 Thermometers for use with alcoholometers and alcohol hydrometers

Magyar Szabványügyi Testület

MSZ 14350-1978 neutron. radio density measurement
MSZ 19357/8-1984 Solid dose. Determination of thermal neutron flux density in nuclear reactors using thermal detectors
MSZ 6367/13-1982 Food and feed processing industry seeds and used product testing. Hardness content and mineral content

German Institute for Standardization

DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN 51757 Bb.1:2012 Testing of mineral oils and related materials - Determination of density - Supplement 1: Guidance on the use of DIN 51757
DIN 18124:1997-07 Determination of particle density of soil using pyknometers

CZ-CSN

CSN 02 9050-1981 Survey of sealing. Properties and use

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
AS/NZS 2891.14.2:2013 Asphalt Sampling and Testing Methods Field Density Testing Determining the Field Density of Compacted Asphalt Using a Nuclear Thin Layer Density Meter
AS/NZS 2891.14.2:2013(R2016) Asphalt Sampling and Testing Methods Field Density Testing Determining the Field Density of Compacted Asphalt Using a Nuclear Thin Layer Density Meter
AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge

Spanish Association for Standardization (UNE)

UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).
UNE 85-235-1987 Use and classification of sealed window glass assembly systems
UNE 103106:1993 DETERMINATION OF MAXIMUN DENSITY OF A SAND BY THE RAMMING METHOD.

British Standards Institution (BSI)

BS 2011-2Q:1967 The enviromental testing of electronic components and electronic equipment. Sealing
BS 2011-2QF:1967 The enviromental testing of electronic components and electronic equipment. Sealing, immersion
BS 2011-2QG:1967 The enviromental testing of electronic components and electronic equipment. Sealing, driving rain
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
BS EN IEC 61788-17:2021 Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
BS EN 4530-002:2024 Aerospace series. Sealing sleeves used in elements of connection - List and utilization of sealing sleeves
BS ISO 23499:2013 Coal. Determination of bulk density for the use in charging of coke ovens
BS IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505 T M
BS CP 1005:1962 The use of electronic valves
BS ISO 11568-2:2012 Financial services. Key management (retail). Symmetric ciphers, their key management and life cycle
BS 5550-6.4:1980 Cinematography. Television usage - Recommendations for the density range, contrast and colour balance of films and slides for colour television
12/30241146 DC BS ISO 16531. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS 2011-2QK:1967 The enviromental testing of electronic components and electronic equipment. Container sealing, tracer gas method with mass spectrometer
BS QC 410400:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for rotary precision potentiometers
11/30205364 DC BS ISO 13145. Rubber. Determination of viscosity and stress relaxation using a rotorless, sealed oscillating-shear rheometer

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE 336M-2001 Television - Data Encoding Protocol Using Key - Length - Value

Institute of Electrical and Electronics Engineers (IEEE)

Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, and A Hybrid Quantum Internet
Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, and A Hybrid Quantum Internet
IEEE P1505.1/D4-2018 The Common Test Interface Pin Map Configuration for High-Density@ Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, and A Hybrid Quantum Internet
Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, and A Hybrid Quantum Internet
Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, Stabilizing Qubits with Dynamic Frequencies, the Implications on Post-Quantum Encryption Protocols, and A Hybrid Quantum Internet
IEEE P1505.1/D6-2019 Standard for the Common Test Interface Pin Map Configuration for High-Density@ Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
IEEE Std 1505.1-2008 IEEE Trial-Use Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
IEEE 1505.1-2019 IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
IEEE Std 1505.1-2019 IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
IEEE P1505.1/D4, July 2018 IEEE Draft Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505
IEEE/IEC 63003-2015 IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)

Korean Agency for Technology and Standards (KATS)

KS B 3617-2002 Grain sizes of diamond or cubic boron nitride
KS M 2002-2011 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS M 2002-1986 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS K ISO 2649-2019 Wool－Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester
KS A 3010-1986 Glossary of terms used in instrumentation Accuracy and precision

RO-ASRO

STAS 5886-1968 plastic. Determination of density and relative density

South African Bureau of Standard

SANS 5844:2006 Particle and relative densities of aggregates
SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density

IETF - Internet Engineering Task Force

RFC 4196-2005 The SEED Cipher Algorithm and Its Use with IPsec
RFC 2410-1998 The NULL Encryption Algorithm and Its Use With IPsec
RFC 4312-2005 The Camellia Cipher Algorithm and Its Use With IPsec
RFC 3602-2003 The AES-CBC Cipher Algorithm and Its Use with IPsec

American Petroleum Institute (API)

API MPMS Chapter 7.3-1985 Static Temperature Determination Using Portable Electronic Thermometers

International Organization for Standardization (ISO)

ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 23499:2013 Coal.Determination of bulk density for the use in charging of coke ovens

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 13145:2013 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
OS GSO ISO 655:2007 Long Enclosed-Scale Thermometers for Precision Use
OS GSO ISO 653:2007 Long Solid-Stem Thermometers for Precision Use
OS GSO ISO 654:2007 Short Solid-Stem Thermometers for Precision Use
OS GSO ISO 656:2005 Short enclosed-Scale thermometers for precision use.

CO-ICONTEC

ICONTEC 2202-1986 Electronics. Sealed, insulated connection system for use underground at 600 volts

CL-INN

INDITECNOR 2.55-5ch-1950 Round secondary hardness copper wire used in electronic circuits

European Telecommunications Standards Institute (ETSI)

ETSI GS QKD 002-2010 Quantum Key Distribution; Use Cases (V1.1.1)
ETSI TR 119 300-2016 Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for cryptographic suites (V1.2.1)

Standards Norway

NS 4510:1981 Long solid-stem thermometers for precision use
NS 4511:1981 Short solid-stem thermometers for precision use
NS-EN 4530-002:2024 Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves

Society of Automotive Engineers (SAE)

SAE AMS 3276H-2024 Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 ¡ãF (182 ¡ãC)
SAE J1954-2000 Guide to the Application and Use of Passenger Car Air-Conditioning Compressor Face Seals
SAE J1954-1990 GUIDE TO THE APPLICATION AND USE OF PASSENGER CAR AIR-CONDITIONING COMPRESSOR FACE SEALS
SAE J1954-2002 Guide to the Application and Use of Passenger Car Air- Conditioning Compressor Face Seals
SAE J1954-1995 Guide to the Application and Use of Passenger Car Air-Conditioning Compressor Face Seals

ETSI

ETSI TR 119 300 V1.2.1 (2016-03)-2016 Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for cryptographic suites

VE-FONDONORMA

COVENIN 723-1976 Air and mechanical strength testing of electronic equipment and electronic components (Part 2: Tests, Test Q: Sealing)

Indonesia Standards

SNI 04-6275.3-2000 Electronic equipment used on rail vehicles - Part 3: Components, programmable electronic equipment and electronic system reliability

International Electrotechnical Commission (IEC)

IEC 63003:2015 Standard for the common test interface pin map configuration for high-density@ single-tier electronics test requirements utilizing IEEE Std 1505 (Edition 1.0)
IEC 63003:2015*IEEE Std 1505.1:2015 IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)

SE-SIS

SIS SS 78 20 35-1983 Shipbuilding - Glazing using sealed units for ship's windows

Standard Association of Australia （SAA）

AS 2341.7:1993(R2013) Test Methods for Asphalt and Related Road Building Products Determination of Density Using Density Bottles
AS 2805.4.1:2001 Electronic funds transfer - Requirements for interfaces - Message authentication - Mechanisms using a block cipher
AS 1289.5.3.1:1993 Methods of testing soils for engineering purposes, Method 5.3.1: Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS 2805.4.1:2001/Amdt 1:2006 The Electronic Funds Transfer interface requires a mechanism for message authentication using block ciphers
AS 2805.4.1:2001(R2006) The Electronic Funds Transfer interface requires a mechanism for message authentication using block ciphers
AS 2831:1985 Thermometers - Solid stem - Long and short - For precision use
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 2341.7:1980 Methods of testing bitumen and related roadmaking products, Part 7: Determination of density using a density bottle

ETSI - European Telecommunications Standards Institute

TR 119 300-2016 Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for cryptographic suites (V1.2.1)

Japanese Industrial Standards Committee (JISC)

JIS K 0061:2001 Test methods for density and relative density of chemical products
JIS B 9929:2006 Standard for measuring methods of airborne ion density

SCC

CAN/BNQ 2501-060-M86:1986 Soils - Determination of in-place density using the sand cone method
CAN/BNQ 2501-058-M88:1988 Soils - Determination of the Density of Soil in Place Using a Flexible Membrane (Water Volume)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE AN-04-9-2004 Symposium on High-Density Electronic Equipment Facility Cooling
ASHRAE AN-04-9-2-2004 A Thermal Bus System for Cooling Electronic Components in High-Density Cabinets

International Telecommunication Union (ITU)

ITU-R BT.1563-1-2011 Data encoding protocol using key-length-value
ITU-R BT.1563-1 FRENCH-2011 Data encoding protocol using key-length-value
ITU-R BT.1563-1 SPANISH-2011 Data encoding protocol using key-length-value

Defense Logistics Agency

DLA DSCC-DWG-04023-2004 CONNECTOR, HIGH DENSITY, KEYING PIN AND BUSHING

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 649-2:2024 LABORATORY GLASSWARE – DENSITY HYDROMETERS FOR GENERAL PURPOSES PART 2: TEST METHODS AND USE

Ente Nazionale Italiano di Unificazione

CNR UNI 10013:1964 Soil Tests - Specific Gravity of Granules
UNI EN 4530-002:2024 Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves
UNI EN 4530-002:2007 Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/SF 61 E-1987 Use of Passwords in Telecommunication Services

Danish Standards Foundation

DS/EN 29 090:1992 Gas tightness of equipment for gas welding and allied processes
DANSK DS/EN 4530-002:2006 Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves