The difference between the carrier series

The difference between the carrier series, Total:342 items.

The international standard classification for "The difference between the carrier series" includes: Geology. Meteorology. Hydrology , Road vehicle tyres , Application of statistical methods , Radiocommunications in general , Company organization and management in general , Data communication networks .

The Chinese standard classification for "The difference between the carrier series" includes: Natural resource and environment protection , Tyre , Comprehensive Technology , Communication equipment in general , Economic Management , Data communication equipment .

Military Standard of the People's Republic of China-General Armament Department

GJB 2719-1996 Airborne communications, navigation, identification friend or foe (CNI) system interface
GJB 8735-2015 J-Series High Temperature Curing Carrier Structural Adhesive Film Specification
GJB 9537-2018 Identification method of critical areas in military nuclear facilities
GJB 1207-1991 Microcircuit chip carrier package terminal arrangement
GJB 5547-2006 General speciflcation for communication navigation and identification system of military aircraft
GJB 4524-2002 Armored vehicle winch series
GJB 1472-1992 Grade series and connection dimensions of military vehicle power take-off

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6258-2008 Specification for J-series carrier structural adhesive films curing at high temperature

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2514.4-2024 Water-saving carrier evaluation specifications Part 4: irrigation areas
DB44/T 2514.2-2024 Evaluation Specifications for Water-Saving Carriers - Part 2: Residential Communities

Professional Standard - Ocean

HY/T 118-2010 Technical guidelines for functional zonation and the overall plan compiling of special marine protected area
HY/T 118-2008 Technical guidelines for functional zonation and the overall plan compiling of special marine protected area

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20068-2006 Technical requirements of shipborne automatic identification system
GB/T 2977-1997 Series of truck tyres
GB/T 30337-2013 Logistics Park Statistical Indicator System

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 20068-2017 Technical requirements of shipborne automatic identification system

Professional Standard - Commodity Inspection

SN/T 1901-2007 Test method for identification of seven textile fibres

Group Standards of the People's Republic of China

T/JSSAE 003-2021 Technical specification for vehicular traffic signal recognition system
T/ZJCCXH 006-2023 Smart logistics park evaluation system
T/SDIOT 018-2020 Sports Equipment Smart Factory (Park) Evaluation System
T/ZGCSC 003-2023 Evaluation indicator system for Smart Community

未注明发布机构

ANSI C136.4-2019 Roadway and Area Lighting Equipment — Series Sockets and Series- Socket Receptacles
DIN EN ISO 7090:2000 Flat discs with chamfer – Normal series – Product class A
DIN EN 4537-2:2010 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
ASTM RR-D01-1017 1978 D1210-Test for Fineness of Dispersion of Pigment-Vehicle Systems

Jiangsu Provincial Standard of the People's Republic of China

DB3211/T 1045-2022 Evaluation system for low-carbon scenic spots

交通运输部

JT/T 1463-2023 Series 2 Container Codes, Identification and Marking

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37102-2018 Performance indicator system of logistics park

Professional Standard - Post and Telecommunication

YD/T 1920-2009 The Architecture of IPTV Bearing Network

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1283-2019 Blockchain Security Evaluation Index System

International Organization for Standardization (ISO)

ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
ISO 23935:2006 Aircraft - Environmental test procedures for airborne fluid system components - Resistance to fire in designated fire zones
ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
ISO 6766:1984 Shipbuilding; Shipborne barges, series 4; Main dimensions
ISO 4175:1979 Shipbuilding; Shipborne barges, series 1; Main dimensions
ISO/PRF TR 6039 Blockchain and distributed ledger technologies — Identifiers of subjects and objects for the design of blockchain systems
ISO 6765:1985 Shipbuilding; Shipborne barges, series 3; Main dimensions
ISO 7222:1985 Shipbuilding; Shipborne barges, series 2; Main dimensions
ISO/TR 6039:2023 Blockchain and distributed ledger technologies — Identifiers of subjects and objects for the design of blockchain systems
ISO 9382:1990 Shipborne barges, all series; classification and main requirements

VDI - Verein Deutscher Ingenieure

VDI 2515 Blatt 2-1995 Identlabel for material handling systems - Mobile data memories

Standard Association of Australia （SAA）

AS ISO/IEC 15424:2006 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
AS 7511:2020 Onboard train protection systems
AS 7503.6:2014 Train Identification and Integrity, Part 6: Whole of Train

IT-UNI

UNI 5634-1965 P Different colors of liquid and gas transportation pipelines
UNI 4764-1961 Industrial vehicle tires. High load capacity series. load and pressure

Association Francaise de Normalisation

NF Z63-400:1994 INFORMATION PROCESSING. CHARACTER RECOGNITION. SYSTEM FOR A MULTI-SECTORIEL CODIFICATION OF ENTITIES.
NF EN 3285:1994 Aerospace series - Bearings for aircraft structures - Steel bearings, cadmium-plated, rigid, with one row of balls - Series of diameters 0 and 2 - Normal clearance category - Dimensions and loads
NF EN 3045:1994 Aerospace series - Bearings for aircraft structures - Steel bearings, rigid, with one row of balls - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
NF EN 3284:1994 Aerospace series - Bearings for aircraft structures - Steel bearings, rigid, with one row of balls - Diameter series 0 and 2 - Normal clearance categories - Dimensions and loads
NF EN 3046:1994 Aerospace series - Bearings for aircraft structures - Steel bearings, cadmium-plated, rigid, with one row of balls - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
NF L31-206*NF EN 2011:1985 Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in corrosion resisting steel, diameter series 8 and 9, dimensions and loads.
NF EN 3286:1994 Aerospace series - Bearings for aircraft structures - Steel bearings, corrosion resistant, rigid, with one row of balls - Series of diameters 0 and 2 - Normal clearance category - Dimensions and loads
NF Z15-155*NF EN 1332-5:2006 Identification card systems - Man-machine interface - Part 5 : raised tactile symbols for differenciation of application on ID-1 cards
NF EN 3047:1994 Aerospace series - Bearings for aircraft structures - Corrosion-resistant steel bearings, rigid, single row of balls - Diameter series 0 and 2 - Category with reduced clearance dimensions and loads
NF EN 4539-2:2019 Aerospace series - Smooth, corrosion-resistant steel ball joints with self-lubricating seal - High load under low oscillation - Large series - Dimensions and loads - Part 2: inch series
NF L31-611-2*NF EN 4539-2:2019 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2 : inch series
NF EN 4905:2023 Série aérospatiale - RFID UHF passive pour une utilisation aéroportée
NF EN 4536-2:2010 Aerospace Series - Corrosion Resistant Steel Bushings with Self-Lubricating Lining, High Load - Part 2: Dimensions and Loads - Inch Series
NF EN 3048:2002 Aerospace Series - Corrosion Resistant Steel Ball Joints with Self-Lubricating Lining - Lightweight High Load Series at Ambient Temperature - Dimensions and Loads
NF L31-606-002*NF EN 4534-2:2017 Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series
NF L31-609-002*NF EN 4537-2:2009 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series
NF EN 4538-003:2011 Aerospace series - Ball joints, in corrosion-resistant steel with self-lubricating lining, high load under low oscillations - Narrow series - Dimensions and loads - Part 003: inch series with low coefficient of friction
NF L31-607-002*NF EN 4535-2:2017 Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2 : dimensions and loads - Inch series
NF EN 2584:2019 Aerospace Series - Corrosion Resistant Steel Ball Joint with Self-Lubricating Liner - Narrow Series - High Load at Ambient Temperature - Dimensions and Loads
NF L35-023*NF EN 6046:2020 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
NF EN 2585:2019 Aerospace Series - Corrosion Resistant Steel Ball Joints with Self-Lubricating Lining - Large Series - High Load at Ambient Temperature - Dimensions and Loads
NF L09-020:2020 Série aérospatiale - Marquage d'identification des équipements à usage aérospatial
NF EN 4535-2:2017 Série aérospatiale - Bagues à épaulement en alliage d'aluminium à garniture autolubrifiante, charge élevée - Partie 2 : dimensions et charges - Série en inches
NF EN 4537-2:2009 Aerospace series - Bushings, corrosion-resistant steel shoulder with self-lubricating seal, high load - Part 2: dimensions and loads - Inch series
NF EN 6046:2020 Aerospace series - Corrosion-resistant steel smooth ball joint - Narrow series - Dimensions and loads - Inch series
NF L31-525*NF EN 4614:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
NF EN 4534-2:2017 Série aérospatiale - Bagues en alliage d'aluminium à garniture autolubrifiante, charge élevée - Partie 2 : dimensions et charges - Série en inches
NF L31-610-2*NF EN 4538-2:2014 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Partie 2 : inch series
NF L31-524*NF EN 4613:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
NF J37-390*NF EN 14329:2004 Inland navigation vessels - Installations of berths and loading areas

ZA-SANS

SANS 15424:2005 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
SANS 15424:2009 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
SANS 557:2008 Small craft - Craft identification - Coding system

American National Standards Institute （ANSI)

ANSI/ATIS 1000671-2000 Signaling System Number 7 (SS7) - Carrier Service Provider Identification (CSPI)
ANSI T1.671-2000 Signalling System Number 7 (SS7) - Carrier Service Provider Identification (CSPI)
ANSI/INCITS 455-2009 Information technology - Codes for the Identification of Congressional Districts and Equivalent Areas of the United States, Puerto Rico, and the Insular Areas
ANSI T1.401.02-2000 Network to Customer Installation Interfaces - Analog Voicegrade Switched Access Lines with Distintive Ringing
ANSI T1.620a-1992 Multi-Rate Circuit-Mode Bearer Service for ISDN - Addendum to the Circuit-Mode Bearer Service Category Description
ANSI C136.4-2003 Roadway and Area Lighting Equipment - Series Sockets and Series - Socket Receptacles
ANSI X3.47-1988 Information Systems - Codes - Structure and Data Requirements for the Identification of Named Populated Places, Primary County Div. and Other Locational Entities of the United States and Its Outlying and Associated Areas for Information Interchange
ANSI/INCITS 38-1988 Information Systems - Codes - Identification of the States, the District of Columbia and the Outlying and Associated Areas of the United States for Information Interchange
ANSI/EIA 540ACAA:1991 Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for

Electronic Components, Assemblies and Materials Association

ECA 540ACAA-1991 Detail Specification for Chip Carrier (PCC) Family 1.27 mm (.050 Inch) Leadspacing

SAE - SAE International

SAE J1464-2004 Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts
SAE J1464-1988 Identification Terminology of Loaders/ Tractors with Forks and Rough Terrain Forklifts@ Recommended Practice (April 1988)

Society of Automotive Engineers (SAE)

SAE J1464-2002 Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts
SAE J846-2009 Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846-2007 Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846-2013 Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846-2023 Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846-1987 CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
SAE J846-2004 Coding Systems for Identification of Fluid Conductors and Connectors
SAE AGS2090-5-2009 AGS2090 Pipe Identification Band for Use in Hot Zones (1.0" Wide)
SAE AGS3441-3-2009 AGS3441 Pipe Identification Band for Use in Hot Zones (1/2" Wide)
SAE AGS2092-5-2009 AGS2092 Pipe Identification Band for Use in Hot Zones (3/4" Wide)

GB-REG

REG 36 CFR PART 7-2011 SPECIAL REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM
REG 46 CFR PART 171-2011 SPECIAL RULES PERTAINING TO VESSELS CARRYING PASSENGERS
REG 46 CFR PART 171-2010 SPECIAL RULES PERTAINING TO VESSELS CARRYING PASSENGERS

AENOR

UNE-EN 3045:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE-EN 3047:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE-EN 3046:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE-EN 3284:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE-EN 3286:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE-EN 3285:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLIN. RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS.
UNE 28626:1987 BEARINGS-AIRFRAME ROLLING DOUBLE ROW, SELF ALIGNING BALL BEARINGS IN STEEL DIAMETER SERIES 2. DIMENSIONS AND LOADS. AEROSPACE SERIES.
UNE 28628:1987 BEARINGS-AIRFRAME ROLLING SINGLE ROW SELF ALIGNING ROLLER BEARINGS IN STEEL DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. AEROSPACE SERIES.

International Telecommunication Union (ITU)

ITU-R QUESTION 232/5-2001 Universal shipborne automatic identification system
ITU-R QUESTION 2325-2001 Universal shipborne automatic identification system
ITU-T I.230 SPANISH-1988 Definition of Bearer Service Categories
ITU-T I.230 FRENCH-1988 Definition of Bearer Service Categories
ITU-T H.460.10-2004 Call party category within H.323 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services Supplementary services for multimedia Study Group 16
ITU-R BT.1614 SPANISH-2003 Video payload identification for digital television interfaces Identificaci髇 de carga 鷗il de v韉eo para interfaces de televisi髇 digital
ITU-T H.460.10 FRENCH-2004 Call party category within H.323 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services Supplementary services for multimedia Study Group 16
ITU-T H.460.10 SPANISH-2004 Call party category within H.323 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services Supplementary services for multimedia Study Group 16

British Standards Institution (BSI)

BS EN 1332-3:2008 Identification card systems - Man-machine interface - Part 3: Keypads
BS ISO 23935:2006 Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
BS ISO 23935:2006(2010) Aircraft — Environmental test procedures for airborne fluid system components — Resistance to fire in designated fire zones
BS EN 1332-5:2006 Identification card systems - Man-machine interface - Raised tactile symbols for differenciation of application on ID-1 cards
BS EN 3045:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
BS 7472:1991 Classification for shipborne barges of all series
BS ISO 23935:2008 Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
BS EN 3046:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in steel, cadmium plated — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
BS EN 3047:1994(2000) Bearings, airframe rolling — Rigid single row ball bearings in corrosion resisting steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
BS EN 4538-2:2014 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Inch series
BS EN 4613:2021 Aerospace series. Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
BS EN 4538-003:2010 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Inch series with low friction coefficient
PD ISO/TR 6039:2023 Blockchain and distributed ledger technologies. Identifiers of subjects and objects for the design of blockchain systems
BS EN 6046:2020 Aerospace series. Bearing, spherical, plain, in corrosion resisting steel. Narrow series. Dimensions and loads. Inch series
BS EN 4539-003:2010 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loads. Inch series with low friction coefficient
BS EN 4709-002:2023 Aerospace series. Unmanned Aircraft Systems - Direct Remote identification
BS MA 87-1:1980 Series 1 shipborne barges. Specification for main dimensions

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 232/5-2001 Universal shipborne automatic identification system

GSO

OS GSO ISO 23935:2016 Aircraft -- Environmental test procedures for airborne fluid system components -- Resistance to fire in designated fire zones
GSO ISO 23935:2016 Aircraft -- Environmental test procedures for airborne fluid system components -- Resistance to fire in designated fire zones

Japanese Industrial Standards Committee (JISC)

JIS B 1082:1987 Stress area and bearing area for threaded fasteners
JIS B 1082:2009 Stress area and bearing area for threaded fasteners
JIS X 4112:1998 Open Document Architecture (ODA) and interchange format -- Part 12: Identification of document fragments
JIS B 8366-3:2000 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 3: Basic series of piston strokes
JIS F 0080:1998 Small craft -- Hull identification -- Coding system

KR-KS

KS V 0951-2014(2024) On-board test procedure for air-conditioning system(Accommodation area)
KS V ISO 24042-2024 Liquid cargo handling equipment — Crude oil offloading system — Tandem mooring winches
KS V ISO 10087-2013(2023) Small craft－Hull identification－Coding system

German Institute for Standardization

DIN EN 3045:1994-02 Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993
DIN EN 3284:1994-11 Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994
DIN EN 3285:1994-11 Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994
DIN EN 3047:1994-02 Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993
DIN EN 3286:1994-11 Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994
DIN 45626-1:1995 Sound carrier with speech for recognition tests - Part 1: Sound carrier with wordlists in accordance with DIN 45621-1 (Recording 1969)
DIN EN 3046:1994-02 Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993
DIN EN 1332-5:2006 Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differentiation of application on ID-1 cards; English version of DIN EN 1332-5:2006-07
DIN EN 3830:2022-10 Aerospace series - Electrical system - Load analysis; German and English version EN 3830:2022
DIN 45626-1:1995-08 Sound carrier with speech for recognition tests - Part 1: Sound carrier with wordlists in accordance with DIN 45621-1 (Recording 1969)
DIN EN 3290:1994 Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994
DIN EN 3282:1994 Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994
DIN EN 4539-2:2019 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series; German and English version EN 4539-2:2019
DIN EN 4905:2024-03 Aerospace series - Passive UHF RFID for airborne use; German and English version EN 4905:2023
DIN EN 3281:1994 Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994
DIN EN 4905:2023-05 Aerospace series - Passive UHF RFID for airborne use; German version ASD-STAN prEN 4905:2023 / Note: Date of issue 2023-04-14*Intended as replacement for DIN EN 4817 (2012-09).
DIN EN 3292:1994 Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994
DIN EN 3291:1994 Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994
DIN EN 3287:1994 Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994
DIN EN 4614:2022-02 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series; German and English version EN 4614:2021
DIN EN 4614:2010 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series; German and English version EN 4614:2009
DIN EN 4539-2:2019-12 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series; German and English version EN 4539-2:2019
DIN EN 6046:2020 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series; German and English version EN 6046:2020
DIN EN 3288:1994 Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994
DIN EN 3289:1994 Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994
DIN EN 6046:2020-05 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series; German and English version EN 6046:2020
DIN 56955:2017-10 Entertainment technology - Load assumptions in stages and associated areas - Imposed loads
DIN EN 4537-2:2014-02 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series; German and English version EN 4537-2:2009
DIN EN 4613:2022-02 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series; German and English version EN 4613:2021
DIN EN 2585:2018 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2585:2018
DIN EN 2584:2019 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2584:2019
DIN EN 2584:2018 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2584:2018
DIN EN 3048:2006-03 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001
DIN EN 2585:2019 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2019
DIN EN 4614:2022 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series; German and English version EN 4614:2021
DIN EN 4613:2022 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series; German and English version EN 4613:2021

SCC

VDI 4461-2010 Stress categories for forklifts
ASD-STAN PREN 2834:2009 Aerospace series Safety pins
DANSK DS/EN 3045:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
NS-EN 3045:1993 Aerospace series — Bearings, airframe rolling — Rigid single row ball bearings in steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
NS-EN 3284:1994 Aerospace series — Bearings, airframe rolling — Rigid single row ball bearings in steel — Diameter series 0 and 2 — Normal clearance category — Dimensions and loads
NS-EN 3046:1993 Aerospace series — Bearings, airframe rolling — Rigid single row bearings in steel, cadmium plated — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
DANSK DS/EN 3284:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
DANSK DS/EN 3286:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
DANSK DS/EN 3046:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
NS-EN 3285:1994 Aerospace series — Bearings, airframe rolling — Rigid single row ball bearings in steel, cadmium plated — Diameter series 0 and 2 — Normal clearance category — Dimensions and loads
NS-EN 3047:1993 Aerospace series — Bearings, airframe rolling — Rigid single row ball bearings in corrosion resisting steel — Diameter series 0 and 2 — Reduced clearance category — Dimensions and loads
04/30115688 DC ISO 23935. Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
DANSK DS/EN 3285:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
NS-EN 3286:1994 Aerospace series — Bearings, airframe rolling — Rigid single row ball bearings in corrosion resisting steel — Diameter series 0 and 2 — Normal clearance category — Dimensions and loads
DANSK DS/EN 3047:1994 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
NS-EN 4539-2:2019 Aerospace series — Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner — Elevated load under low oscillations — Wide series — Dimensions and loads — Part 2: Inch series
BS 7251-9:1992 Orthopaedic joint prostheses-Method of determination of resistance to static load of the head and neck region of stemmed femoral components of hip joint prostheses
DANSK DS/ISO/TR 6039:2023 Blockchain and distributed ledger technologies – Identifiers of subjects and objects for the design of blockchain systems
NS 832:1989 Identification colours for piping systems for industrial gases
BS PD ISO/TR 6039:2023 Blockchain and distributed ledger technologies. Identifiers of subjects and objects for the design of blockchain systems
DANSK DS/EN 3830:2022 Aerospace series – Electrical system – Load analysis
NS-EN 3830:2022 Aerospace series - Electrical system - Load analysis
ASD-STAN PREN 3830:1995 Aerospace Series Electrical System Load Analysis
ASD-STAN prEN 4539-1:1970 Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Metric series
ASD-STAN prEN 4538-1:1970 Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Narrow series - Dimensions and loads - Metric series
BS BIP 0039:2006 The differences between BS 15000 & ISO/IEC 20000
ASD-STAN prEN 4538-2:1970 Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Narrow series - Dimensions and loads - Inch series
INCITS 47-1988(R1994) Structure for the Identification of Named Populated Places, Primary County Divisions and other Entities of the U.S. and Its Outlying Areas for Information Interchange (formerly ANSI X3.47-1988(R1994))
DANSK DS/EN 2585:2019 Aerospace series – Bearing, spherical plain in corrosion resisting steel with self-lubricating liner – Wide series – Elevated load at ambient temperature – Dimensions and loads
AWWA ACE92081 Master Planning for a Regional Reclamation System
DIN 56955:2017 Entertainment technology - Load assumptions in stages and associated areas - Imposed loads
NS-EN 6046:2020 Aerospace series — Bearing, spherical, plain, in corrosion resisting steel — Narrow series — Dimensions and loads — Inch series
DANSK DS/EN 4614:2009 Aerospace series – Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series – Dimensions and loads – Inch series
NS-EN 4613:2009 Aerospace series — Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series — Dimensions and loads — Inch series
ITU-T SERIES Y SUPP 56-2019 ITU-T Y-series – Supplement on use cases of smart cities and communities
DANSK DS/EN 4613:2009 Aerospace series – Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series – Dimensions and loads – Inch series
DANSK DS/EN 6046:2020 Aerospace series – Bearing, spherical, plain, in corrosion resisting steel – Narrow series – Dimensions and loads – Inch series
DANSK DS/EN 2584:2019 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner – Narrow series – Elevated load at ambient temperature – Dimensions and loads
NS-EN 2584:2019 Aerospace series — Bearings, spherical plain in corrosion resisting steel with self-lubricating liner — Narrow series — Elevated load at ambient temperature — Dimensions and loads
NS-EN 2585:2019 Aerospace series — Bearing, spherical plain in corrosion resisting steel with self-lubricating liner — Wide series — Elevated load at ambient temperature — Dimensions and loads
ASD-STAN TR 6058:2018 Aerospace series Cable code identification list
NS-EN 4537-2:2009 Aerospace series — Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load — Part 2: Dimensions and loads — Inch series
NS-EN 4614:2009 Aerospace series — Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series — Dimensions and loads — Inch series
DANSK DS/EN 4537-2:2009 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
DIN EN 2585 E:2018 Draft Document - Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2585:2018
BS EN 4614:2009 Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
DIN EN 2584 E:2018 Draft Document - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version FprEN 2584:2018
NS-EN 2584:1992 Aerospace series — Bearings, spherical plain in corrosion resisting steel, with self-lubricating liner — Narrow series — Elevated loads at ambient temperature — Dimensions and loads

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3045-1987 Aerospace Series Bearings-Airframe Rolling Rigid Single Row Ball Bearings in Steel Diameter Series 0 and 2 Reduced Clearance Category Dimensions and Loads (Issue P 1)
PREN 3046-1987 Aerospace Series Bearings-Airframe Rolling Rigid Single Row Ball Bearings in Steel Cadmium Plated Diameter Series 0 and 2 Reduced Clearance Category Dimensions and Loads (Issue P 1)
PREN 3047-1987 Aerospace Series Bearings-Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 0 and 2 Reduced Clearance Category Dimensions and Loads (Issue P 1)
PREN 3284-1987 Aerospace Series Bearings-Airframe Rolling Rigid@ Single Row Ball Bearings in Steel Diameter Series 0 and 2 Normal Clearance Category Dimensions@ Torques@ and Loads (Issue P 1)
PREN 2834-2009 Aerospace series Safety pins (Edition P 1)
PREN 3285-1987 Aerospace Series Bearings-Airframe Rolling Rigid@ Single Row Ball Bearings in Steel@ Cadmium Plated Diameter Series 0 and 2 Normal Clearance Category Dimensions@ Torques@ and Loads (Issue P 1)
PREN 3286-1987 Aerospace Series Bearings-Airframe Rolling Rigid@ Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 0 and 2 Normal Clearance Category Dimensions@ Torques@ and Loads (Issue P 1)
PREN 4538-2-2001 Aerospace Series Bearings@ Spherical Plain@ in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Narrow Series Dimensions and Loads Inch Series (Edition P 1)
PREN 4539-1-2001 Aerospace Series Bearings@ Spherical Plain@ in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Wide Series Dimensions and Loads Metric Series (Edition P 1)
PREN 4539-2-2001 Aerospace Series Bearings@ Spherical Plain@ in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Wide Series Dimensions and Loads Inch Series (Edition P 1)
PREN 4538-1-2001 Aerospace Series Bearings@ Spherical Plain@ in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Narrow Series Dimensions and Loads Metric Series (Edition P 1)
PREN 3830-1995 Aerospace Series Electrical System Load Analysis (Edition P 1)
PREN 6046-1998 Aerospace Series Bearings@ Sperical Plain@ in Corrosion Resisting Steel Narrow Series Dimensions and Loads Inch Series (Edition P 1)
PREN 2834-1988 Aerospace Series Safety Pins (Issue P 1)
TR 6058-2006 Aerospace Series Cable Code Identification List (Edition 8)
PREN 4535-2-2008 Aerospace series Bushes@ flanged in aluminium alloy with self-lubricating liner@ elevated load Part 2: Dimensions and loads — Inch series (Edition P1)
TR 6058-2016 Aerospace series Cable code identification list (Edition 11)
TR 6058-2007 Aerospace Series Cable Code Identification List (Edition 10)
TR 6058-2018 Aerospace series Cable code identification list (Edition 12)

Danish Standards Foundation

DS/EN 3045:1994 Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
DS/EN 3284:1994 Aerospace series - Bearings,airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
DS/EN 3285:1994 Aerospace series-Bearings,airframe rolling-Rigid single row ball bearings in steel,cadmium plated-Diameter series 0 and 2-Normal clearance category-Dimensions and loads
DS/EN 3047:1994 Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
DS/EN 3286:1994 Aerospace series - Bearings,airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
DS/EN 3046:1994 Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
DS/EN 4534-2:2009 Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
DS/EN 302931 V1.1.1:2011 Intelligent Transport Systems (ITS); Vehicular Communications; Geographical Area Definition
DS/EN 4535-2:2009 Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
DS/EN 4536-2:2009 Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
DS/EN 4537-2:2009 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
DS/EN 2585:2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
DS/EN 3048:2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
DS/EN 4614:2021 Aerospace series – Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series – Dimensions and loads – Inch series

American Gas Association

AGA GEOP S-2-1987 GEOP Series: Supplemental Gases - Peak Shaving/Base Load, Book 2, Vol. I (XY8701)

Lithuanian Standards Office

LST EN 3285-2001 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
LST EN 3284-2001 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
LST EN 3046-2001 Aerospace series - Bearings, airframe rolling - Rigid single row bearings in steel, cadmium plated - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
LST EN 3045-2001 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
LST EN 3047-2001 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
LST EN 3286-2001 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
LST EN 4534-2-2009 Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
LST EN 302 931 V1.1.1-2011 Intelligent Transport Systems (ITS); Vehicular Communications; Geographical Area Definition
LST EN 4535-2-2009 Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
LST EN 4537-2-2009 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
LST EN 2584-2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
LST EN 2585-2003 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
LST EN 4536-2-2009 Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
LST EN 3048-2002 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads

ECIA - Electronic Components Industry Association

EIA-540ACAA-1991 Detail Specification for Chip Carrier (PCC) Family 1.27 mm (.050 Inch) Leadspacing

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P1048b IEEE Draft Guide for Protective Grounding of Power Lines Amendment 2: Differentiating the Fabric Carrier Mat and the Rigid Carrier Mat
IEEE P1048b/D003, July 2024 IEEE Draft Guide for Protective Grounding of Power Lines Amendment B: Differentiating the Fabric Carrier Mat and the Rigid Carrier Mat

Korean Agency for Technology and Standards (KATS)

KS V 0951-2014 On-board test procedure for air-conditioning system(Accommodation area)
KS V 0951-2019 On-board test procedure for air-conditioning system(Accommodation area)
KS V ISO 4175-2014 Shipborne barges, series 1－Main dimensions
KS V ISO 6766-2020 Shipborne barges, series 4－Main dimensions
KS V ISO 4175-2005(2010) Shipborne barges, series 1－Main dimensions
KS V ISO 6766-2005(2020) Shipborne barges, series 4－Main dimensions
KS P ISO 3950:2008 Dentistry－Designation system for teeth and areas of the oral cavity
KS V ISO 6766:2005 Shipborne barges, series 4-Main dimensions
KS V ISO 7222:2004 Shipbuilding-Shipborne barges, series 2-Main dimensions
KS V ISO 9382:2008 Shipborne barges, all series-Classification and main requirements
KS V ISO 7222:2014 Shipbuilding — Shipborne barges, series 2 — Main dimensions

TR-TSE

TS 826-1970 SIZING SEWEGE SYSTEMS FOR RESIDENTIAL DWELLINGS
TS 2256-1976 LIMITS AND FITS — SERIES OF ANGLES AND SLOPES ON WEDGES AND PRISMS

U.S. Military Regulations and Norms

ARMY MIL-Q-45618 F NOTICE 1-1996 QUADRANT, FIRE CONTROL, ELEVATION: M13 SERIES
ARMY MIL-Q-45618 F-1971 QUADRANT, FIRE CONTROL, ELEVATION: M13 SERIES

SE-SIS

SIS SEN 30 03 29 Series paper clips, 4 pole, 2, 5, 4, 6 and 10mm
SIS SS-ISO 216:1991 Writingpaper andcertain classes of printed matter — Trimmed sizes — A and B series

CEN - European Committee for Standardization

EN 1332-3:1999 Identification Card Systems - Man-Machine Interface - Part 3: Key Pads

European Committee for Standardization (CEN)

EN 1332-3:2008 Identification card systems - Man-machine interface - Part 3: Keypads
EN 4905:2023 Aerospace series - Passive UHF RFID for airborne use
EN 4265:2013 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
EN 4538-2:2014 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 2: Inch series

CZ-CSN

CSN EN 20216-1990 Writing páper and certain classes of printed matter — Trimmed sizes — A and B series
CSN 26 9103-1981 Staoking bins. Dimensions and ratings. Series
CSN 26 9041-1993 Unit loads. Unified modular series
CSN 26 9041-1983 Unit loads. Unified modular series.
CSN 18 6507-1987 Industrial robots.Series of nominal load capacity

U.S. Air Force

AIR FORCE FIPS-PUB-10-4-1995 COUNTRIES, DEPENDENCIES, AREAS OF SPECIAL SOVEREIGNTY, AND THEIR PRINCIPAL ADMINISTRATIVE DIVISIONS
AIR FORCE FIPS-PUB-5-2-1987 CODES FOR THE IDENTIFICATION OF THE STATES, THE DISTRICT OF COLUMBIA AND THE OUTLYING AREAS OF THE UNITED STATES, AND ASSOCIATED AREAS
AIR FORCE FIPS-PUB-5-2 CHG NOTICE 1-1987 CODES FOR THE IDENTIFICATION OF THE STATES, THE DISTRICT OF COLUMBIA AND THE OUTLYING AREAS OF THE UNITED STATES, AND ASSOCIATED AREAS

European Association of Aerospace Industries

AECMA PREN 2834-1988 Aerospace Series Safety Pins Issue P 1
AECMA PREN 6046-1998 Aerospace Series Bearings, Sperical Plain, in Corrosion Resisting Steel Narrow Series Dimensions and Loads Inch Series Edition P 1
AECMA PREN 4265-1996 Aerospace Series Bearings, Spherical Plain, in Corrosion Resisting Steel Wide Series - Dimensions and Loads Inch Series Edition P 1
AECMA PREN 4266-1996 Aerospace Series Bearings, Spherical Plain, in Corrosion Resisting Steel, Cadmium Plated Wide Series - Dimensions and Loads Inch Series Edition P 1
AECMA PREN 3830-1995 Aerospace Series Electrical System Load Analysis Edition P 1

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD11-1984 Chip Carrier Pinouts Standardized for CMOS 4000, HC and HCT Series of Logic Circuits
JEDEC JESD2-1982 Digital Bipolar Pinouts for Chip Carriers

FI-SFS

SFS 3355-1977 Handling of flammable liquids in port areas. Loading and unloading equipment

American Society for Testing and Materials (ASTM)

ASTM E2262-03(2020) Standard Practice for Estimating Thurstonian Discriminal Distances
ASTM D1210-96 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1210-96(2004) Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

National Electrical Manufacturers Association（NEMA)

NEMA C136.4-2003 For Roadway and Area Lighting Equipment-Series Sockets and Series-Socket Receptacles (***BEST AVAILABLE COPY***)

PL-PKN

PN L01430-1992 Aerospace series Test methods for the flame resistance rating of non-metallic materials

NO-SN

NS 832-1989 Identification colours for piping systems for industrial gases

ES-UNE

UNE-EN 3830:2022 Aerospace series - Electrical system - Load analysis (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN 4539-2:2019 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series (Endorsed by Asociación Española de Normalizació...
UNE-EN 4614:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 4613:2021 Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 4537-2:2009 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in September of 2009.)
UNE-EN 6046:2020 Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in May of 2020.)

ATIS - Alliance for Telecommunications Industry Solutions

0300039-2011 Guideline for Identifying Downloadable Software for Plug-in Cards
0300039-2008 Guideline for Identifying Downloadable Software for Plugin Cards

NATO - North Atlantic Treaty Organization

STANAG 2129-2010 Identification of Land Forces on the Battlefield and in an Area of Operation (ED 8)

API - American Petroleum Institute

API REPORT 83-31-1984 Hydrodynamic Coefficients for Cylinders Covered with Soft Organisms@ Particularly Sea Anemones

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0300039-2011 Guideline for Identifying Downloadable Software for Plug-in Cards
ATIS 0300039-2008 Guideline for Identifying Downloadable Software for Plugin Cards
ATIS 0300039-2020 Guideline for Identifying Downloadable Software for Plug-in Cards

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 4535-2-2015 Aerospace series Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load Part 2: Dimensions and loads Inch series (Edition P2)

CU-NC

NC 75-07-1988 Shipuilding. Cargo Handling Means with Booms. Series of Cargo Capacities

Others: The difference between the carrier series