Special gas 5 tests

Special gas 5 tests, Total:151 items.

The international standard classification for "Special gas 5 tests" includes: Air quality in general , Internal combustion engines , Non-destructive testing of metals , Protection against dangerous goods , Animal husbandry and breeding , Non-destructive testing , Laboratory medicine , Playgrounds .

The Chinese standard classification for "Special gas 5 tests" includes: Environmental Quality Standard for atmosphere, water and soil , Metal nondestructive testing method , Marking, packaging, transport and storage in general , Domesticate animal , Basic standards and general methods , Sanitation in general , Toys , Environmental monitoring instrument and its complete equipment .

Professional Standard - Agriculture

JAP-138 specific grass detection method
JAP-037 Butyate detection method
SN/T 5038-2018 Code specification for entry-exit inspection and quarantine inspection items
140药典四部-2015 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations
JAP-027 Pyridate detection method
121药典四部-2020 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations

Group Standards of the People's Republic of China

T/GTM 007-2022 Operating procedures for testing pH in microbial fertilizers
T/CIET 004-2022 Special ability assessment standards for engineering quality testing institutions
T/ZJSEE 0018-2023 Testing management specification for distributed photovoltaic power generation project
T/ZFB 0046-2023 Performance evaluation of technical equipment project of inspection and testing

其他未分类

BJY 201802 Supplementary test methods for plant tissue inspection items of large abdominal skin in Huoxiang Zhengqi Pills (modified Huoxiang Zhengqi Pills)
BJY 201710 Supplementary testing method for abietic acid test items in Agarwood Huaqi Pills

National Metrological Verification Regulations of the People's Republic of China

JJG 1105-2015 Ammonia Gas Detectors
JJG(石油) 42-1996 Verification Regulation of Petroleum Tubular Thread Single Parameter Gage

Professional Standard - Environmental Protection

HJ/T 431-2008 Measurement technology guidelines for check and accept of air pollution control project for bulk gasoline terminal and gasoline filling station

Professional Standard - Machinery

JB/T 4730.5-2005 Nondestructive Testing of Pressure Equipments - Part 5: Penetrant Testing
JB/T 10555-2006 Nondestructive testing-Ultrasonic testing of aivs
JB/T 10555-2013 Nondestructive Testing - Ultrasonic Testing of Air Valves
JB/T 7150-1993 Main inspection items and detection methods of high-strength bolts for construction machinery
JB/T 6012.5-2014 Internal combustion engines. Intake and exhaust valves. Part 5:Fluorescent penetrant testing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14926.6-2001 Laboratory animal - Method for examination of Bordetella bronchiseptica
GB 29919-2013 Safety Code for Inspection of Hazardous Properties for Miscellaneous Dangerous Substance and Articles
GB/T 18851.5-2005 Non-destructive testing - Penetrant testing - Part5: Means of verification
GB/T 18851.5-2014 Non-destructive testing―Penetrant testing―Part 5: Penetrant testing at temperatures higher than 50 ℃

Professional Standard - Land Management

TD/T1031.5-2011 Procedures for Preparing Land Reclamation Plans Part 5: Oil and Natural Gas (including Coalbed Methane) Projects
TD/T 1031.5-2011 Regulation on Compiling Land Reclamation Plan - Part 5: Petroleum and Natural Gas (Including Coal-bed Gas)

中华人民共和国国家卫生和计划生育委员会

WS/T 404.5-2015 Reference intervals for common clinical biochemistry tests—Part 5:Serum urea and creatinine

Professional Standard - Energy

NB/T 47013.5-2015 Nondestructive Testing of Pressure Equipment Part 5: Penetrant Testing
NB/T 47013.5-2015 Nondestructive testing of pressure equipments Part 5: Penetrant testing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34370.5-2017 Nondestructive testing of amusement equipments―Part 5:Ultrasonic testing

Anhui Provincial Standard of the People's Republic of China

DB34/T 3433.1-2019 Metrology testing data information part 1: data items

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1327.5-2020 Qualification Accreditation of Inspection and Testing Institutions Part 5: Specifications for Preparation of Inspection and Testing Reports

Guangdong Provincial Standard of the People's Republic of China

DB44/T 792.1-2017 Part 1 of the special test on the sports function of venues: general rules
DB44/T 792.1-2010 Specific testing of venue sports functions Part 1 General Rules

工业和信息化部/国家能源局

JB/T 12727.5-2016 Nondestructive tesing instrument. Standard test block. Part 5: Penetrant testing block

Professional Standard - Railway

TB/T 1558.5-2010 Non-destructive Testing of Welding for Rolling Stock - Part 5: Penetrant Testing

国家铁路局

TB/T 1558.5-2018 Non-destructive testing of welding for rolling stock - Part 5: Penetrant testing

Professional Standard - Coal

MT 273-1994 Detector Tube for Ammonia Gas
MT/T 273-1994 Ammonia gas detection tube
MT 275-1994 Detector Tube for Oxygen

HU-MSZT

MSZ 523/5-1975 Testing of physical properties of MSZ 523/5-75 cement. Volume detection
MSZ 523/7-1978 MI 523/7-78 Cement physical properties testing. Gasification possibility detection
MSZ MI 4300/5-1981 MI 4300/5-81 Metal welding concept inspection. Shielded gas welding
MSZ 6060-3.lap-1959 Air testing. Mining air testing
MSZ 9698/5.lap-1961 Vegetable testing, sensory characteristics testing
MSZ 9650/16-1975 Pigment testing. Self-rectifying feature detection
MSZ 5650/2-1971 Natural gas detection. Thickness detection
MSZ 4309/5-1982 MSZ 4309/5-82 Steel welding and fixation inspection. Hardness testing
MSZ 2501/1-1982 Detection of chemical properties of coal slag used in construction
MSZ 4720/3-1980 Concrete quality testing. Special attribute detection
MSZ 14800/5-1978 MSZ 14800/5-78 Fire detection, fire detection of open systems
MSZ 10985/2-1979 Urban natural gas testing. Combustion detection
MSZ 21456/5-1986 Air gas pollution detection. Sulfur dioxide content detection
MSZ 12882/1-1982 Develop fabric testing methods. Compilation feature detection
MSZ 8888/33-1984 environmental test. Cold/low pressure detection
MSZ 12757/5-1976 MSZ 12757/5-76 Testing of raw minerals. Antimony dioxide content detection
MSZ 12736/5-1978 MSZ 12736/5-78 Lime chemical testing. Iron oxide content detection

U.S. Military Regulations and Norms

ARMY AR 570-7-1991 EQUIPMENT SURVEY PROGRAM

BE-NBN

NBN C 71-598-205-1990 Luminaires Part 2 : Particular requirements Section 5 - Floodlights

Lithuanian Standards Office

LST EN 61262-5-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994)
LST EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
LST EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
LST EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
LST EN 61243-5-2002 Live working. Voltage detectors. Part 5: Voltage detecting systems (VDS) (IEC 61243-5:1997, modified)

German Institute for Standardization

DIN EN 61262-5:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994
DIN 44536-2:1983 Vented open-outlet boiler, wall mounting type, capacity up to 5 litres; characteristics of performance, tests
DIN EN ISO 3452-5:2009-04 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); German version EN ISO 3452-5:2008
DIN EN ISO 8130-5:2020 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO/DIS 8130-5:2020); German and English version prEN ISO 8130-5:2020
DIN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021); German version EN ISO 8130-5:2021
DIN EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011

SE-SIS

SIS SS IEC 780:1988 Nuclear instrumentation — Qualification of electrical items of the safety system for nuclear power generating stations
SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
SIS SS-ISO 8206:1992 Acceptance tests for oxygen cutting machines — Reproducible accuracy — Operational characteristics

Korean Agency for Technology and Standards (KATS)

KS C IEC 60851-5-2015(2020) Winding wires — Test methods — Part 5：Electrical properties
KS C IEC 61262-5:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 5：Determination of the detective quantum efficiency
KS C IEC 60092-502:2007 Electrical installations in ships-Part 502:Special features-Tankers
KS C IEC 60092-502:2013 Electrical installations in ships-Part 502:Special features-Tankers
KS V 8216-1999(2004) Electrical installations in ships Part 502：Special features－Tankers
KS B ISO 3452-5:2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
KS I ISO 4225:2012 Air Quality - General - Units of Measurement
KS I 2002-2005 Air quality－General aspects(Units of measurement)
KS M ISO 8130-5:2008 Coating powders－Part 5：Determination of flow properties of a powder/air mixture
KS C IEC 60092-504:2007 Electrical installations in ships－Part 504：Special features－Control and instrumentation
KS C IEC 60554-3-5-2015(2020) Specification for cellulosic papers for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Special papers

(U.S.) Plastic Pipe Association

PPI INSPECTIONS-1999 Inspections, Test and Safety Considerations

Spanish Association for Standardization (UNE)

UNE 9-009-1985 Characteristics of gas fuel required for boiler projects
UNE-EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
UNE-EN 61262-5:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 5: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY.
UNE-EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
UNE-EN 583-5:2001 Non-destructive testing. Ultrasonic examination. Part 5: Characterization and sizing of discontinuities.

SCC

NS-EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
AENOR UNE-EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
06/30151657 DC BS EN ISO 3452-5. Non-destructive testing. Penetrant testing. Part 5. Penetrant testing at temperatures higher than 50 degreesC
VDI 4300 BLATT 11-2013 Measuring indoor air pollution — Measurement strategy for the detection of airborne particles in indoor spaces — PM<sub>2.5</sub> fraction
IAPMO IGC 115-2009 ASME Project Automatic Water Leak Detection and Control Systems
AENOR UNE-EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
NS-EN ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
NS-EN ISO 8130-5:2010 Coating powders — Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
BS 5343-1:1986 Gas detector tubes-Specification for short term gas detector tubes
11/30238497 DC BS EN 13160-5. Leak detection systems. Part 5. Tank gauge leak detection systems
DANSK DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
IEC 60851-5:1988/AMD1:1990 Amendment 1 - Methods of test for winding wires. Part 5: Electrical properties .
ASA S1.24 TR-2002(R2007) Bubble Detection and Cavitation Monitoring
AWWA DSS60342 Case Study: Leak-Detection Options That Pay for Themselves
NS-EN ISO 10893-5:2011 Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
AENOR UNE-EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
DIN EN 61779-5:2001 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas (IEC 61779-5:1998, modified); German version EN 61779-5:2000

Association Francaise de Normalisation

NF EN 16602-70-15:2021 Assurance produit des projets spatiaux - Essais non destructifs
NF EN ISO 3452-5:2009 Essais non destructifs - Examen par ressuage - Partie 5 : examen par ressuage à des températures supérieures à 50oC

International Organization for Standardization (ISO)

ISO 11093-5:1994 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation
ISO 11093-5:2009 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation
ISO 11093-5:2016 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation
ISO 11093-5:2009/Cor 1:2010 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation - Technical Corrigendum 1: Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation; Technical Corrigendum 1

National Association of Corrosion Engineers (NACE)

NACE SP0274-1974 High-Voltage Electrical Inspection of Pipeline Coatings (Item No. 21010)

Underwriters Laboratories (UL)

UL 1484 BULLETIN-2008 UL Standard for Safety Residential Gas Detectors (COMMENTS DUE: May 05@ 2008)

International Electrotechnical Commission (IEC)

IEC 60092-502:1999 Electrical installations in ships - Part 502: Tankers - Special features
IEC 60092-501:1984 Electrical installations in ships. Part 501 : Special features - electric propulsion plant.
IEC 60092-504:2001 Electrical installations in ships - Part 504: Special features; Control and instrumentation

IT-UNI

UNI 7682-1977 Statistical methods are used for quality inspection. Statistical acceptance procedure for variables based on eigenvalues
UNI 7680-1977 Statistical methods are used for quality inspection. Statistical acceptance procedure for variables based on eigenvalues

US-COE

COE CEGS 14580-2000 PNEUMATIC-TUBE SYSTEM, NOTICE 1-6 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED

GSO

BH GSO ISO 3452-5:2016 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
OS GSO ISO 3452-5:2013 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C

KR-KS

KS C IEC 61779-2-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 2 Performance requirements for Group I devices for detecting methane volume fraction below 5%
KS B ISO 3452-5-2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
KS C IEC 61243-5-2017 Live working－Voltage detectors－Part 5：Voltage detecting systems(VDS)

RU-GOST R

GOST 4.195-1985 System of product-quality indices. Electrical standards. Nomenclature of indices
GOST 4.448-1986 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices
GOST 4.447-1986 Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices

American Society for Testing and Materials (ASTM)

ASTM E329-13b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-13 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-13a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-13c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-11b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-11c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E329-14a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

CH-SNV

SN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)

Danish Standards Foundation

DS/EN ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C

DIN

DIN ISO 8130-5:2005 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)

YU-JUS

JUS H.N8.122-1987 Testing ofpaper andboard'. Determination of air permeance (medium range). Bendtsen method

British Standards Institution (BSI)

20/30421045 DC BS EN ISO 8130-5. Coating powders. Part 5. Determination of flow properties of a powder/air mixture
BS EN ISO 3452-5:2008(2015) Non - destructive testing — Penetrant testing Part 5 : Penetrant testing at temperatures higher than 50 degrees C
24/30491450 DC BS EN 12543-5 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes

Standard Association of Australia （SAA）

AS ISO 3452.5:2020 Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C

Japanese Industrial Standards Committee (JISC)

JIS F 8076:2005 Electrical installations in ships -- Part 504: Special features -- Control and instrumentation

American Society of Mechanical Engineers (ASME)

ASME SEC IV PT HG A-5-2003 Article 5 Tests, Inspection, and Stamping

European Committee for Electrotechnical Standardization（CENELEC）

EN 61243-5:2001 Live Working - Voltage Detectors - Part 5: Voltage Detecting Systems (VDS)

South African Bureau of Standard

SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments

European Committee for Standardization (CEN)

EN 13477-2:2010 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic

American National Standards Institute （ANSI)

ANSI/AWS B1.10M/B1.10:2016 Guide for the Nondestructive Examination of Welds (5th Edition)

Others: Special gas five tests,Special gas 5 tests,Five tests of special gas,Local special gas detection,Nearby special gas detection,Special gas detection