Laboratory commonly used two

Laboratory commonly used two, Total:188 items.

The international standard classification for "Laboratory commonly used two" includes: Graphical symbols for use on specific equipment , Test conditions and procedures in general , Laboratory medicine , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Laboratory commonly used two" includes: Basic laboratory equipment , Laboratory instrument and vacuum instrument in general , Basic standards and general methods , Papermaking in general , Medical apparatus and devices in general , Basic standards and general methods , Medical laboratory equipment , Meteorology , Actuator .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
GB/T 29477-2012 General technical specification for mobile laboratory shelter
GB/T 29253-2012 Major graphical symbols for laboratory instruments and equipment
GB/T 43278-2023 Medical laboratories—Application of risk management to medical laboratories
GB/T 24324-2009 Pulps—Preparation of laboratory sheets for physical testing—Conventional sheet-former method
GB/T 30096-2013 Major letter symbols for laboratory instrument and equipment
GB/Z 30154-2013 Medical laboratories—Guidance on laboratory implementation of GB/T 22576—2008

Professional Standard - Agriculture

水产品质量安全检验手册 1.1.2.3-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic Laboratory Requirements (3) Technical Requirements for Microbiological Laboratory Operations
水产品质量安全检验手册 1.1.2.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic Requirements of the Laboratory (2) General Requirements for Microbiological Laboratory Work
水产品质量安全检验手册 1.1.1.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (2) Laboratory Layout
水产品质量安全检验手册 1.1.2.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic requirements of laboratories (1) General requirements for physical and chemical laboratory work

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2478-2018 Phytosanitary laboratory routine inspection technique virus
DB51/T 1546-2012 Phytosanitary laboratory routine inspection techniques fungi
DB51/T 2100-2015 Phytosanitary laboratory routine inspection technique bacteria

Professional Standard - Meteorology

QX/T 221-2013 Technical requirements for construction of meteorological laboratory. Grade Ⅱstandard laboratory

Professional Standard - Commodity Inspection

SN/T 3902-2014 General requirements for biosafety level Ⅱ laboratories of inspection and quarantine

Group Standards of the People's Republic of China

T/SLEA 0021-2023 laboratory metal cabinets
T/ZS 0628-2024 Technical specification for door setting of BSL- 2 laboratory
T/CITS 130-2024 General requirements for the preparation of risk assessment reports for biosafety level 2 laboratories
T/CITS 0114-2024 Guideline of biosafety level 2 laboratory construction procedure
T/CECS 662-2020 Architectureal Technical Standard for BSL-2 Laboratory in Medical Facilities
T/GXAS 779-2024 Specification for informatization management of conventional chemicals
T/CMBA 024-2024 General requirements for biosafety level 2 laboratory operation and management

Military Standard of the People's Republic of China-General Armament Department

GJB 15481-2001 General requirements for competence of testing and calibration laboratories
GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

Professional Standard - Light Industry

QB/T 3703-1999 Pulps--Preparation of laboratory sheets conventional sheet-former method

Professional Standard - Geology

DZ/T 0016-1991 Shaking table for laboratory

Taiwan Provincial Standard of the People's Republic of China

CNS 9029-1985 Enamel Dish for Laboratory
CNS 9030-1985 Enamel Bucket for Laboratory
CNS 8176-1981 Metal Laboratory Ware Clamps
CNS 8177-1981 Metal Laboratory Ware Stand Bases
CNS 9035-1985 Enamel Casserole for Laboratory
CNS 9033-1985 Enamel Beaker for Laboratory
CNS 9034-1985 Enamel Funnel for Laboratory

Hubei Provincial Standard of the People's Republic of China

DB42/T 1957-2023 Standards for checking management of common chemical measuring equipment in laboratories

Professional Standard - Certification and Accreditation

RB/T 207-2016 Assessment guidelines of daily administration for designated laboratories of China compulsory certification

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1990-2012 General Technical Conditions for Mobile Laboratory Experiment Cabin

Professional Standard - Machinery

JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge

RO-ASRO

STAS 4094-1987 Glass capacity unit for laboratory use. Commonly used straws
STAS 8375/1-1969 Laboratory thermometer. Conventional probe thermometer
STAS 3079-1967 Laboratory rubber tube

Association Francaise de Normalisation

NF X08-102:1986 Colours. Laboratory topware. Identification of fluids with conventional colours.
NF Q50-019-1*NF EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1 : conventional sheet-former method
NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF S92-081*NF EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories
NF EN ISO 9142:2004 Adhesives - Guide for the selection of normal laboratory aging test conditions for bonded assemblies
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.

Korean Agency for Technology and Standards (KATS)

KS L ISO 1772:2013 Laboratory crucibles in porcelain and silica
KS L ISO 1772-2023 Laboratory crucibles in porcelain and silica
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS L ISO 1772-2013(2018) Laboratory crucibles in porcelain and silica
KS M ISO 5269-1:2016 Pulps－Preparation of laboratory sheets for physical testing－Part 1：Conventional sheet-former method
KS M ISO 5269-1:2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS M ISO 5269-1:2006 Pulps-Preparation of laboratory sheets for physical testing-Part 1:Conventional sheet-former method
KS P ISO 22367-2023 Medical laboratories — Application of risk management to medical laboratories
KS C IEC 60477-2:2013 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO TR 22869-2019 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS P ISO TR 22869-2009(2019) Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories

CZ-CSN

CSN 50 0224-1989 Preparation of laboratory sheets. Conventional sheetformer method
CSN 70 4309-1996 Laboratory glassware. Thick - walled laboratory glass vessels. Common regulations

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 90558-2015 LABORATORY DESIGN GUIDE Planning and Operation of Laboratory HVAC Systems (Second Edition)
ASHRAE HVAC APPLICATIONS SI CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS IP CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS IP CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2011 LABORATORIES

CN-STDBOOK

图书 A-4850 Case analysis of common non-conformities in calibration laboratories
图书 3-9473 Compilation of Common Standards for Microbiology and Biomedical Laboratories (Part 1) (Second Edition)
图书 3-9474 Compilation of Common Standards for Microbiology and Biomedical Laboratories (Part 2) (Second Edition)
图书 3-8870 Food Microbiology Laboratory Quality Management Manual (Second Edition)

British Standards Institution (BSI)

BS EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS EN ISO 22367:2020 Medical laboratories. Application of risk management to medical laboratories
BS 3145:1978 Specification for laboratory pH meters
BS EN ISO 7787-1:2016 Dentistry. Laboratory cutters. Steel laboratory cutters
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN ISO 5269-1:2005(2009) Pulps — Preparation of laboratory sheets for physical testing — Part 1 : Conventional sheet - former method
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories

Japanese Industrial Standards Committee (JISC)

JIS P 8222:2015 Pulps -- Preparation of laboratory sheets for physical testing -- Conventional sheet-former method
JIS R 4203:1978 Enamel apparatus for laboratory

SCC

BS EN ISO 5269-1:2001 Pulps. Preparation of laboratory sheets for physical testing-Conventional sheet-former method
NS 4522:1980 Laboratory crucibles in porcelain and silica
AWWA WSC67797 Laboratory Emergency Response Planning: Enhancing Routine Procedures for Effective Response
CAN/CSA-ISO 15190-2021 Medical laboratories - Requirements for safety (Adopted ISO 15190:2020, second edition, 2020-02)
DANSK DS/ISO 22367:2020 Medical laboratories – Application of risk management to medical laboratories
BS 3978:1966 Specification for water for laboratory use
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
DANSK DS/ISO/TR 22869:2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
AWWA WQTC57055 Use of a Molecular Methods in a Routine Laboratory Example of the Detection of Viruses From Sludge Samples
BS 5928:1980 Specification for bottles for laboratory use
NS-EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
DANSK DS/EN ISO 22367:2020 Medical laboratories – Application of risk management to medical laboratories (ISO 22367:2020)
NS-EN ISO 5269-1:2000 Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method (ISO 5269-1:1998)

YU-JUS

JUS H.N8.160-1988 Pulps. Ffaparation of laboratory sheets forphysical testing. Conventional sheet-former method
JUS H.N8.160/1-1990 Pulps. Preparat/on oflaboratory sheets forphysical testing. Conventional sheet-former method. Amendments
JUS B.B8.121-1990 Laboratory d&ternination of pulse velocities and ultrasoulc elastic constants of rock

IT-UNI

UNI 5581-1965 P Aluminum oxide. Commonly used in aluminum production. Preparation and preservation of laboratory samples
UNI 6128-1972 laboratory test concrete

GSO

OS GSO ISO 1772:2010 Laboratory crucibles in porcelain and silica
GSO ISO 7056:2007 Plastics laboratory ware - Beakers
GSO ISO 1772:2010 Laboratory crucibles in porcelain and silica
GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
OS GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003

KR-KS

KS L ISO 1772-2013(2023) Laboratory crucibles in porcelain and silica
KS M ISO 5269-1-2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS M ISO 5269-1-2016 Pulps－Preparation of laboratory sheets for physical testing－Part 1：Conventional sheet-former method
KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors

RU-GOST R

GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories
GOST 29252-1991 Laboratory glassware. Burettes. Part 2. Burettes for which no waiting time is specified

German Institute for Standardization

DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005); German version EN ISO 5269-1:2005
DIN 12918-1:1999-05 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN EN ISO 22367:2020-09 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020); German version EN ISO 22367:2020
DIN 30665-1:1982 Gas-appliances; gas-burners for laboratory use (laboratory burners)
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN 12785 Bb.1:1978 Laboratory glassware; special purpose laboratory thermometers, additional remarks
DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN EN ISO 22367 E:2019-04 Application of medical laboratory risk management in medical laboratories (draft)

PL-PKN

PN C13055-1970 Laboratory glassware Two-ways stopcocks

Standard Association of Australia （SAA）

AS 2937:2005 Laboratory glassware - Straight-bore glass stopcocks for general purposes
AS ISO 22367:2021 Medical laboratories — Application of risk management to medical laboratories

American Society for Testing and Materials (ASTM)

ASTM D2904-97 Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D2904-97(2002) Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D2845-00 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
ASTM D2845-00(2004)e1 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
ASTM E438-92(2006) Standard Specification for Glasses in Laboratory Apparatus

Danish Standards Foundation

DS/IEC 477-2:1981 Laboratory resistors. Part 2: Laboratory a.c. resistors
DS/EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method

European Committee for Standardization (CEN)

EN ISO 5269-1:2000 Pulps - Preparation of Laboratory Sheets for Physical Testing - Part 1: Conventional Sheet-Former Method ISO 5269-1:1998
CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method

International Organization for Standardization (ISO)

ISO 5269-1:1979 Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method
ISO 5269-1:1998 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method
ISO 22367:2020 Medical laboratories — Application of risk management to medical laboratories
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories

European Committee for Electrotechnical Standardization（CENELEC）

HD 249.2-1981 Laboratory Resistors Part 2: Laboratory A.C. Resistors

International Electrotechnical Commission (IEC)

IEC 60477-2:1979 Laboratory resistors. Part 2 : Laboratory a.c. resistors
IEC 60477-2:1979/AMD1:1997 Laboratory resistors - Part 2: Laboratory a.c. resistors; Amendment 1

Underwriters Laboratories (UL)

UL 3101-2-20-1997 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition

Spanish Association for Standardization (UNE)

UNE 400312:1997 LABORATORY CRUCIBLES IN PORCELAIN AND SILICA.
UNE-EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)

HU-MSZT

MNOSZ 11967-1953 Laboratory dust brush
MNOSZ 6647-1952 Laboratory refrigeration rack
MSZ 6760-1959 WASSERMANN sink for laboratory use
MSZ 14719-1960 Laboratory enamelware
MSZ 14740-1964 Laboratory glassware
MNOSZ 14712-1953 Laboratory enamel tools
MNOSZ 14739-1954 Laboratory glassware
MSZ 14734/6-1982 Laboratory ceramic tools
MSZ 14734/1-1982 Laboratory enamelware
MSZ 14741-1964 Laboratory glassware

GOSTR

GOST R ISO/TR 22869-2009 Medical laboratories. Quidance on laboratory implementation of ISO 15189:2003

DIN

DIN CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

GOST

GOST R ISO 22367-2022 Medical laboratories. Application of risk management to medical laboratories

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APPLICATION IP CH 16-2011 LABORATORIES
ASHRAE APP IP CH 14-2007 Laboratories

AR-IRAM

IRAM 11 508-1962 Commonly used indoor wooden doors

VN-TCVN

TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 11-2002 Laboratories

Canadian Standards Association (CSA)

CAN/CSA-C22.2 NO.61010-2-020-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Second Edition)

CEN - European Committee for Standardization

EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

NL-NEN

NEN 1758-1964 Laboratory glassware. Bacteriological test tubes

TH-TISI

TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

AT-ON

ONORM EN 45001-1990 General criteria for the operation of testing laboratories

Others: Common laboratory equipment,Other common laboratory equipment,Instruments commonly used in laboratories,Other common laboratory equipment,Commonly used laboratory instruments,Common Laboratory Equipment,Common equipment for laboratory equipment,Equipment commonly used in laboratories,Laboratory commonly used,Laboratory commonly used 2,Laboratory commonly used two,Commonly used equipment in mechanical and electrical laboratories,Commonly used equipment in the laboratory,Commonly used electricity in the laboratory,Common laboratory equipment,Portable instruments commonly used in laboratories,Commonly used equipment in nearby laboratories,Laboratory glass,Equipment commonly used in the laboratory,Commonly used instruments in biochemical laboratories