Equipment detection means

Equipment detection means, Total:349 items.

The international standard classification for "Equipment detection means" includes: Non-destructive testing , Testing (Vocabularies) , Non-destructive testing of metals , Therapy equipment .

The Chinese standard classification for "Equipment detection means" includes: Ultrasonic wave and sound radiation defectoscope , Basic standards and general methods , Metal nondestructive testing method , Physiotherapy and TCM instrument and equipment .

Group Standards of the People's Republic of China

T/CASME 1402-2024 Mobile phone cover glass appearance defect detection equipment
T/QGCML 1650-2023 Automatic sampling equipment with liquid level detection
T/NLIA 005-2021 PCB online defect detection equipment
T/CRGTA 002-2017 Sales of used mobile phone—Detection and identification
T/SHMHZQ 024-2022 Optical image detection equipment
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
T/GDAQI 008-2019 The inspection service specification for special equipment
T/GDCKCJH 007-2020 Specification for archives management of special equipment inspection and testing institutes instrument and equipment archives
T/CIET 032-2023 Door motor automatic detection equipment
T/ZEIIA 03-2022 OLED automatic optical inspection equipment
T/HEBQIA 304-2024 Design specification for intelligent steel testing equipment
T/CIET 25-2023 Rotor shaft automatic detection equipment

Professional Standard - Navy

HJB 449.24-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 24:Fighting torpedo section examination
HJB 449.20-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 20:Checking platform of rear cabin
HJB 449.3-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 3:Drikking torpedo section examination
HJB 449.7-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 7:Electronic section examination
HJB 449.8-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 8:Electronic section assembler

Taiwan Provincial Standard of the People's Republic of China

CNS 12772-1990 Method of test for hand flares for marine use (→CNS12771)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15822.3-2005 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
GB/T 18851.4-2005 Non-destructive testing - Penetrant testing - Part4: Equipment
GB/T 27664.1-2011 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
GB/T 15822.3-2024 Non-destructive testing—Magnetic particle testing—Part 3：Equipment
GB/T 27664.2-2011 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes
GB/T 27664.3-2012 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 3:Combined equipment

Chongqing Provincial Standard of the People's Republic of China

DB50/T 719-2016 433MHz frequency band micro-power wireless communication equipment physical layer performance testing specification

Professional Standard - Machinery

JB/T 4730.6-2005 Nondestructive Testing for Pressure Equipment - Part 6: Eddy current testing
JB/T 4730.4-2005 Nondestructive Testing of Pressure Equipments - Part 4: Magnetic Particle Testing
JB/T 4730.2-2005 Nondestructive testing of pressure equipments?Part 2:Radiographic testing
JB/T 4730.1-2005（标准释义） Nondestructive testing of pressure equipments
JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 4730.2-2005（标准释义） Nondestructive testing of pressure equipments
JB/T 4730.3-2005（标准释义） Nondestructive testing of pressure equipments
JB/T 4730.6-2005（标准释义） Nondestructive testing of pressure equipments
JB/T 4730.5-2005（标准释义） Nondestructive testing of pressure equipments
JB/T 4730.4-2005（标准释义） Nondestructive testing of pressure equipments

Professional Standard - Commodity Inspection

SN/T 0506-2014 Rules for the inspection of lifting equipment for export and import - Hand-driven/electric block

Professional Standard - Energy

NB/T 10620-2021 Vibration testing of pressure equipment
NB/T 47013.5-2015 Nondestructive Testing of Pressure Equipment Part 5: Penetrant Testing
NB/T 47013.2-2015 Nondestructive Testing of Pressure Equipment Part 2: Radiographic Testing
NB/T 47013.4-2015 Nondestructive Testing of Pressure Equipment Part 4: Magnetic Particle Testing
NB/T 47013.2-2015(R1) Nondestructive testing of pressure equipments.Part 2: Radiographic testing

国家药监局

YY/T 1661-2019 Electrical resistance detector at acupuncture points equipment

Gansu Provincial Standard of the People's Republic of China

DB62/T 4907-2024 Special equipment inspection and testing service specifications

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 1634-2022 On-line detection method of pipeline-type water intake metering facilities

Military Standard of the People's Republic of China-General Armament Department

GJB 1344A-2017 General specifications for ordnance equipment testing equipment

Professional Standard - Post and Telecommunication

YD/T 1900-2009 Test Method of Deep Packet Inspection Device

German Institute for Standardization

DIN 25450:1990 Ultrasonic equipment for manual testing
DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
DIN EN 13927:2003-05 Non-destructive testing - Visual testing - Equipment; German version EN 13927:2003
DIN EN 17931:2023 Gas welding equipment - Manual gas equipment for welding, heating and cutting - Periodic Inspection; German and English version prEN 17931:2023
DIN EN 17931:2023-03 Gas welding equipment - Manual gas equipment for welding, heating and cutting - Periodic Inspection; German and English version prEN 17931:2023 / Note: Date of issue 2023-02-10
DIN EN 13927:2003 Non-destructive testing - Visual testing - Equipment; German version EN 13927:2003
DIN EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004
DIN 32937:2018-04 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DIN 25450:1990-09 Ultrasonic equipment for manual testing
DIN EN ISO 22232-3:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020); German version EN ISO 22232-3:2020
DIN 32937 E:2017-08 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
DIN EN ISO 9934-3:2015-12 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015); German version EN ISO 9934-3:2015
DIN 32937:2018 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DIN EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DIN EN 16714-2:2016-11 Non-destructive testing - Thermographic testing - Part 2: Equipment; German version EN 16714-2:2016
DIN EN 1395-6:2007-04 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems; German version EN 1395-6:2007
DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN EN ISO 22232-3:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO/DIS 22232-3:2018); German and English version prEN ISO 22232-3:2018
DIN 33891-4:1992 Dust emission of technical equipment; determination of dust emission rate; handholding drills and hammers

RU-GOST R

GOST R 22.9.15-2014 Safety in emergencies. Technical means of chemical detection. Test methods
GOST R 22.9.21-2014 Technical means of chemical detection. Slassification. General technical requirements
GOST 8.435-1981 State system for ensuring the uniformity of measurements. Neasuring set line building-out networks. Methods and means for checking
GOST R ISO 26142-2013 Hydrogen detection apparatus. Stationary applications
GOST 29216-1991 Electromagnetic compatibility of technical means. Man-made noise from information technology equipment. Limits and test methods
GOST R 59590-2021 Mining equipment. Multipurpose safety systems for coal mines. Autonomous means of monitoring and recording the parameters of the mine atmosphere
GOST 26348-1984 Facsimile apparatus with redundancy reduction means for facsimile document information transmission and reception. Basic parameters
GOST R 51151-1998 Garage equipment. Safety requirements and methods of inspection
GOST R ISO 3452-4-2011 Non-destructive testing. Penetrant testing. Part 4. Equipment

GOST

GOST 16844-1986 Technical requipments for mechanical hammers
GOST 8.436-1981 State system for ensuring the uniformity of measurements. Measuring sets power supply bridges. Methods and means for checking
GOST R 59914-2021 Technical means of rehabilitation. Devices for printing relief graphics. General specifications

International Organization for Standardization (ISO)

ISO 3453:1984 Non-destructive testing; Liquid penetrant inspection; Means of verification
ISO 22232-3:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
ISO/FDIS 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
ISO/DIS 24367 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
ISO 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
ISO 3058:1998 Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers
ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 5761:2011 In-Service Safety Inspections and Tests - Pre-Sale Used Equipment
AS/NZS 5761:2005 In-service safety inspection and testing - Second-hand electrical equipment prior to sale

HU-MSZT

MNOSZ 14659-1955 Medical equipment. Examination and surgical chairs
MSZ 6575/13-1982 Check the galvanic layer by chemical means
MSZ 7073-1987 Check the galvanic layer by chemical means
MSZ KGST 2172-1980 General specifications for diamond particle quality requirements and testing methods
MSZ 05 97.0401-1982 Independent equipment testing equipment
MNOSZ 18881-1954 Independent equipment testing equipment
MNOSZ 14674-1955 Medical equipment. Laryngology examination and surgery chair
MSZ 8880/21-1976 Power equipment testing tools and testing methods. cooling equipment
MNOSZ 18413-1955 Fixed testing equipment
MSZ 9650/26-1982 Paint testing. Corrected Abel． Ignition point detection in Pensky equipment
MNOSZ 15648-1954 Arson equipment detection
MSZ 18602/3-1980 Coal mine equipment inspection
MNOSZ 11982-1953 Surgical equipment. Harman nasal surgery equipment
MSZ 4227-1972 Laboratory equipment water disinfection equipment requirements and testing
MSZ 8880/9.lap-1963 Electrical equipment testing tools and testing methods. detection hook
MSZ 8880/10-1974 Power equipment testing tools and testing methods. Detection stick
MSZ 8880/9-1963 Power equipment testing tools and testing methods. detection hook
MSZ 8880/15-1974 Power equipment testing tools and testing methods. Detection of wet edges
MSZ 8889/1.lap-1963 Equipment and instruments for climate-related testing. Cold detection
MSZ 4822/3-1972 Stability testing of high-voltage equipment. Voltage detection
MSZ 8880/12-1971 Electronic equipment testing tools and testing methods. Leakage detection
MSZ 6116/3-1979 Manual equipment inspection. Phosphorus content detection mode
MSZ 8880/13.lap-1963 Electronic equipment testing tools and testing methods. Insulation testing
MSZ 8889/2.lap-1963 Equipment and instruments for climate-related testing. Dry heat detection
MSZ 8880/13-1974 Power equipment testing tools and testing methods. Insulation testing
MSZ 8888/9.lap-1962 Equipment and instruments for climate-related testing. Mildew detection
MNOSZ 10471-1952 Surgical equipment. Pool metering equipment
MNOSZ 10487-1952 Surgical equipment. Rib Clamp Equipment
MSZ 8880/5-1974 Power equipment testing tools and testing methods. Pressure detection ball
MSZ 8880/20-1975 Power equipment testing tools and testing methods Side effects detection
MSZ 8880/6-1974 Electric power production chip testing tools and testing mode testing equipment
MSZ 8880/22-1976 Power equipment testing tools and testing methods. Pullout force detection
MSZ 8880/5.lap-1963 Power equipment testing tools and testing methods. Pressure detection ball
MSZ 4822/6-1973 Electrical stability testing of high-voltage equipment. Radio wave detection
MSZ 5200/23.lap-1959 Generator water detection. Exchange equipment information detection and softened water quality detection
MSZ 8889/4.lap-1963 Equipment and instruments for climate-related testing. Moisture and heat detection
MSZ 4822/4-1972 High voltage equipment stability detection voltage wave detection
MSZ 8880/23-1976 Power equipment testing tools and testing methods. Bend inspection
MNOSZ 10483-1952 Surgical equipment. Ophthalmic scalpel
MNOSZ 10466-1953 Surgical equipment. rib connecting device
MSZ 18744-1980 Printing inspection connection machinery and equipment. liquid equipment
MSZ 4055/7.lap-1960 Inspection of surgical instrument pliers
MSZ 8880/3-1974 Electronic equipment testing tools and testing methods. hammer
MSZ 8880/16.lap-1963 Power equipment testing tools and methods. Anti-corrosion testing
MSZ 8880/16-1963 Power equipment testing tools and testing methods. Anti-corrosion protection testing
MI 12660/27-1979 Thermal equipment. Chemical testing of water and steam equipment, operational testing of hydrogen and sodium exchange desalination equipment
MSZ 5185-1971 Excavation equipment. Check the lining inspection of threaded pipes on the formwork
MSZ 3224/5-1981 Wool and cotton yarn testing methods use distinctive testing equipment
MSZ 8880/4.lap-1963 Electronic equipment testing tools and testing methods. Falling weight
MNOSZ 10452-1952 Surgical equipment. Ossicle hip bending device
MSZ 6575/2.lap-1961 Belt buckle inspection. Belt buckle product auxiliary equipment inspection
MSZ 8880/2-1963 Power equipment testing tools and testing methods. FreccsenteInstruments
MSZ 5380-1970 Inspection of semi-finished products in paper industry. For basic equipment testing
MSZ 8880/17.lap-1968 Electronic equipment testing tools and testing methods. spring hammer
MSZ 8880/8-1963 Power equipment testing tools and testing methods. catcher
MSZ 8880/7-1977 Power equipment testing tools and testing methods. Current stability check
MSZ 17132-1987 DC detection and measurement equipment. Technical products and testing
MSZ 8880/4-1974 Power equipment testing tools and testing methods. catcher
MSZ 4822/1-1972 Large product equipment. Electrical equipment testing, general standards

Korean Agency for Technology and Standards (KATS)

KS V ISO 17631-2012(2017) Shipboard plans for fire protection, life-saving appliances and means of escape
KS B ISO 3453-2016 Non－destructive testing－Liquid penetrant inspection－Means of verification
KS B ISO 3453:2006 Non-destructive testing-Liquid penetrant inspection-Means of verification
KS B ISO 3453:2016 Non－destructive testing－Liquid penetrant inspection－Means of verification
KS P 8414-2007 Wrist units
KS B ISO 3452-4:2022 Non-destructive testing — Penetrant testing — Part 4: Equipment
KS B ISO 3452-4-2006(2016) Non－destructive testing－Penetrant testing－Part 4：Equipment
KS B ISO 3452-4-2006(2021) Non－destructive testing－Penetrant testing－Part 4：Equipment
KS C IEC 60736-2003(2018) Wattmeter test equipment
KS B ISO 9934-3:2022 Non-destructive testing — Magnetic particle testing — Part 3: Equipment
KS C IEC 62606-2014(2019) General requirements for arc fault detection devices
KS P 1309-2009 Testing method for ostomy aids
KS W 0711-1997(2012) FLIGHT CONTROL SYSTEMS-DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR

PL-PKN

PN P04644-1973 Woven fabrics Detection of kind and determinatior of finish content means
PN-EN ISO 22232-3-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 3: Combined equipment (ISO 22232-3:2020)

RO-ASRO

STAS 8842-1979 Automation means and devices AIR FOR SUPPLYING PNEUMATIC AUTOMATION MEANS General technical requirements for quality
STAS 10027/1-1985 DETECTION' AND MEASUREMENT OF IONIZING RADIATION BY ELECTRIC MEANS RADIATION MEASURING ASSEMBLIES Terminology
STAS 11959/3-1983 Fire fighting equipment PORTABLE EXTINGUISHERS Checking methods
STAS 11053/10-1979 Testing devices for ilectrical purposes EQUIPMENT TO PROVE PROTECTION AGAINST DUST Technical requirements
STAS 8197-1982 Automation devices and means ELECTROPNEUMATIC CONVERTERS General technical requirements
STAS 8196-1982 Automation devices and means PNEUMOELECTRIC CONVERTERS General technical requirements
STAS 11349-1979 Automation devices and means ELECTRIC TRANSDUCERS WITH ANALOGUE UNIFIED SIGNALTechnical requirements for quality

International Electrotechnical Commission (IEC)

IEC 61557-10:2000 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective meas
IEC 60073:1991 Coding of indicating devices and actuators by colours and supplementary means

GSO

GSO IEC 62327:2015 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
GSO IEC TR 60736:2007 Testing Equipment for Electrical Energy Meters
GSO ISO 17631:2013 Ships and marine technology -- Shipboard plans for fire protection, life-saving appliances and means of escape
BH GSO ISO 17631:2016 Ships and marine technology -- Shipboard plans for fire protection, life-saving appliances and means of escape
OS GSO ISO 3452-4:2013 Non-destructive testing -- Penetrant testing -- Part 4: Equipment
GSO ISO 3452-4:2013 Non-destructive testing -- Penetrant testing -- Part 4: Equipment
GSO ISO 9934-3:2013 Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment
BH GSO ISO 3452-4:2016 Non-destructive testing -- Penetrant testing -- Part 4: Equipment
GSO ISO 12865:2010 Ophthalmic instruments-Retinoscopes

International Telecommunication Union (ITU)

ITU-T Q.331-1988 Test equipment for checking equipment and signals
ITU-T Q.164-1988 Test equipment for checking equipment and signals
ITU-T Q.137-1988 Automatic testing equipment
ITU-T Q.138-1988 Instruments for checking equipment and measuring signals

Association Francaise de Normalisation

NF G07-220-1*NF EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1 : method using a manual thermodetection device
NF EN ISO 15548-1:2014 Non-destructive testing - Equipment for eddy current examination - Part 1: characteristics of the device and checks
NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1: devices
NF EN 13927:2003 Essais non destructifs - Contrôle visuel - Équipement
NF EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of phased array ultrasonic testing equipment - Part 1: Devices
NF EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 3: complete equipment
NF X50-841:1997 Breakdown-towing activity - Breakdown-towing of light vehicles - Specification of equipment and resources
NF A09-320-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: combined equipment
NF A09-320-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment
NF EN 302372-2:2011 Electromagnetic and radio spectrum compatibility (ERM) - Short range devices (SRD) - Equipment for detection and movement - Reservoir level survey radar (TPLR) operating in frequency bands 5.8 ...
NF EN 302372-1:2011 Electromagnetic compatibility and radio spectrum (ERM) - Short range devices (SRD) - Equipment for detection and movement - Reservoir level survey radar (TPLR) operating in the frequency bands 5.8...
NF EN ISO 3452-4:1999 Essais non destructifs - Examen par ressuage - Partie 4 : équipement
NF D14-510:1987 Sanitary appliances. Dimensional checking. Test method.
NF A09-027-2*NF EN 16714-2:2016 Non-destructive testing - Thermographic testing - Part 2 : equipment
NF ISO 7915:2021 Forestry equipment - Portable chain saws - Determination of handle strength
NF F11-600:1994 Railway rolling - Airtightness tests for pneumatic and electropneumatic equipement.

Aeronautical Radio Inc.

ARINC 607-3 ITEM 6.0 Equipment Testing

European Committee for Standardization (CEN)

EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
EN 13927:2003 Non-destructive testing - Visual testing - Equipment
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
EN 12668-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
EN 16714-2:2016 Non-destructive testing - Thermographic testing - Part 2: Equipment

British Standards Institution (BSI)

BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device
BS EN 12668-3:2013 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
BS EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
BS EN ISO 22232-3:2020 Non - destructive testing — Characterization and verification of ultrasonic test equipment Part 3 : Combined equipment
23/30462464 DC BS EN 17931. Gas welding equipment. Manual gas equipment for welding, heating and cutting. Periodic Inspection
BS IEC 60736:1982 Testing equipment for electrical energy meters
PD ISO/TR 15155-2:2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. Test facility operating manual
BS IEC 60736:1982(2001) Testing equipment for electrical energy meters
BS ISO 19898:2019 Ships and marine technology. Life-saving appliances and arrangements. Means of recovery of persons
BS EN ISO 3452-4:1999(2008) Non - destructive testing — Penetrant testing — Part 4 : Equipment
BS EN 15767-3:2010 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Part 3: Foam devices

AT-ON

ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes
ONORM M 7532-2001 Testing of flue gases of oil burning systems - Method by fluid means for detection of oil derivatives
ONORM M 1349/AC1-1999 Verification of measuring and test equipment - Testing Instruction for measuring tapes (Corrigendum)
ONORM E 1352-1955 Test Equipment. Detector Staubschuβ
ONORM E 1359-1977 Detector. Anti-turnover inspection equipment
ONORM E 1380-1971 Testing Devices, Standard Test Pin D
ONORM E 1391-1968 Detector. Inspection of heating equipment such as bases and assembly surfaces
ONORM M 9400 Beib.2-1993 Dry cleaning equipment - Test book and operating diary for adsorption plants for the retrieval of solvents
OENORM EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)

CZ-CSN

CSN 83 2044-1984 Labour protection. Contactless safety means of production equipment. General requirements

National Fire Protection Association (NFPA)

NFPA 1911H-2012 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus Handbook

Danish Standards Foundation

DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
DS/ISO 3453:1987 Non-destructive testing. Liquid penetrant inspection. Means of verification
DS/EN 13927:2003 Non-destructive testing - Visual testing - Equipment
DS 2364:1993 Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment
DS/EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN 12668-3/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment (ISO 22232-3:2020)
DS/EN ISO 3452-4:1999 Non-destructive testing - Penetrant testing - Part 4: Equipment
DS/EN ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
DS 2364:1994 Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment
DS/EN 1395-6:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems

Spanish Association for Standardization (UNE)

UNE-EN 12668-3:2001 NON-DESTRUCTIVE TESTING. CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT. PART 3: COMBINED EQUIPMENT.
UNE-EN 13927:2003 Non-destructive testing - Visual testing - Equipment
UNE-EN ISO 22232-3:2022 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
UNE-EN 12668-3:2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
UNE-EN ISO 9934-3:2016 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)
UNE-EN 16714-2:2017 Non-destructive testing - Thermographic testing - Part 2: Equipment
UNE-EN 12668-1:2001 NON-DESTRUCTIVE TESTING. CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT. PART 1: INSTRUMENTS.
UNE-EN 1395-6:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

SCC

DANSK DS/EN 13927:2003 Non-destructive testing - Visual testing - Equipment
NS-EN 13927:2003 Non-destructive testing — Visual testing — Equipment
AENOR UNE-EN 13927:2003 Non-destructive testing - Visual testing - Equipment
DANSK DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
NS-EN 12668-3:2000 Non-destructive testing — Characterization and verification of ultrasonic examination equipment — Part 3: Combined equipment
DANSK DS/EN 12668-3:2013 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 3: Combined equipment
NS-EN 12668-3:2013 Non-destructive testing — Characterization and verification of ultrasonic examination equipment — Part 3: Combined equipment
DIN 32937 E:2017 Draft Document - Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
DANSK DS/ISO 17631:2002 Ships and marine technology – Shipboard plans for fire protection, life-saving appliances and means of escape
DIN EN 17931 E:2023 Draft Document - Gas welding equipment - Manual gas equipment for welding, heating and cutting - Periodic Inspection; German and English version prEN 17931:2023
DIN EN 12668-3 E:2013 Draft Document - Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; German version FprEN 12668-3:2013
MIL MIL-PRF-63045B-1997 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (SUPERSEDING MIL-M-63045A)
DANSK DS/EN ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
DANSK DS 2320:2020 Fire-extinguishing equipment - Hand-held fire extinguishers - Maintenance, service inspection, periodic examination and recharging and self-check
DANSK DS/EN ISO 3452-4:1999 Non-destructive testing - Penetrant testing - Part 4: Equipment
DANSK DS/EN ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment (ISO 22232-3:2020)
NS-EN 16714-2:2016 Non-destructive testing — Thermographic testing — Part 2: Equipment
HB 41-1993 Design checkers' handbook for buildings
NS-EN ISO 22232-3:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment (ISO 22232-3:2020)
DIN 81220 E:2009 Draft Document - Ships and marine technology - Signs and plates for fire fighting, life-saving appliances and means of escape
DANSK DS/EN 16714-2:2016 Non-destructive testing – Thermographic testing – Part 2: Equipment
DANSK DS/EN 1395-6:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
AENOR UNE-EN 1395-6:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
NS-EN 1395-6:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
AENOR UNE-EN 16714-2:2017 Non-destructive testing - Thermographic testing - Part 2: Equipment
NS-EN 15317:2007 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
NS-EN 15317:2013 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
AENOR UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

BE-NBN

NBN-EN 60073-1993 Coding of indicating devices and actuators by colours and supplementary means

U.S. Military Regulations and Norms

ARMY MIL-HDBK-204 A NOTICE 1-2013 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-204 A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-204A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY AR 570-7-1991 EQUIPMENT SURVEY PROGRAM
ARMY MIL-PRF-63045B-1997 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT
ARMY MIL-PRF-63045B VALID NOTICE 1-2006 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT
ARMY MIL-PRF-63045 B VALID NOTICE 1-2006 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT
ARMY MIL-PRF-63045 B-1997 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT
ARMY MIL-PRF-63045 B (1)-2001 MANUALS, TECHNICAL: PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT

Japanese Industrial Standards Committee (JISC)

JIS C 0448:1997 Coding of indicating devices and actuators by colours and supplementary means
JIS B 7761-1:2004 Hand-transmitted vibration -- Part 1: Measuring instrumentation
JIS T 7309:2002 Visual acuity testing equipment

South African Bureau of Standard

SANS 51395-6:2009 Thermal spraying - Acceptance inspection of thermal spraying equipment Part 6: Manipulator systems

VN-TCVN

TCVN 5111-1990 Determination of working ability of man fitted with individual protection means.Physiological methods

Lithuanian Standards Office

LST EN 13927-2003 Non-destructive testing - Visual testing - Equipment
LST EN 12668-3-2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN 12668-3-2001/A1-2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN 12668-3-2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
LST EN 1395-6-2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TR 50542-2010 Railway applications - Communication means between safety equipment and man-machine interfaces (MMI)

United States Navy

NAVY MIL-HDBK-2165-1995 TESTABILITY HANDBOOK FOR SYSTEMS AND EQUIPMENT
NAVY UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING

Institute of Electrical and Electronics Engineers (IEEE)

NFPA (Fire) 1911HB12 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus Handbook, 2012 edition

US-FCR

FCR NAV MO-322 VOL 3-1977 INSPECTION OF SHORE FACILITIES INSTRUCTOR'S MANUAL FOR MAINTENANCE (REAL PROPERTY) INSPECTOR TRAINING COURSE PHASE 1
FCR UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING
FCR UFGS-16081-2004 APPARATUS INSPECTION AND TESTING
FCR COE RPMAS 66600-1978 INSPECTION AND TESTING OF SECURITY PROTECTION DEVICES

U.S. Air Force

AIR FORCE MIL-HDBK-83575-1998 GENERAL HANDBOOK FOR SPACE VEHICLE WIRING HARNESS DESIGN AND TESTING

CN-STDBOOK

图书 A-4733 Work Manual for On-site Safety Supervision and Inspection of Special Equipment

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC 2547-2002 Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Test, Inspection and Rework

IT-UNI

UNI EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment

DIN

DIN 54180-2:2022 Non-destructive testing - Shearographic testing - Part 2: Test equipment

US-CLSI

CLSI POCT09-A-2010（R2017） Selection Criteria for Point-of-Care Testing Devices
CLSI POCT09-A-2010 Selection Criteria for Point-of-Care Testing Devices
CLSI POCT09-A V.30 N.8-2010 1875 Selection Criteria for Point-of-Care Testing Devices

CU-NC

NC 90-01-45-1985 Metrological Assurance. Cogwheel's Normal Measuring Device. Verlfication Methods and Means
NC 57-41-1984 School Equipment and Teaclilng Means. School Texts. Requirements for Typographic Presentation
NC 90-03-06-1984 Metro;ogical Assurance Plane Angle Measurement Means National Transmission Scheme
NC 90-01-43-1984 Metrological Assurance. "TESTER" Gages. Verffication Methods and Means

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
VDI/VDE/DGQ 2618 Blatt 1.1-2001 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals
VDI/VDE/DGQ 2618 Blatt 10.4-2008 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads

American Society for Testing and Materials (ASTM)

ASTM F2362-03(2013) Standard Specification for Temperature Monitoring Equipment
ASTM F1355-06(2014) Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment

Standard Association of Australia （SAA）

AS 4691.1:2003/Amdt 1:2006 Laser-based speed detection equipment definition and equipment requirements
AS ISO 3452.4:2020 Non-destructive testing — Penetrant testing, Part 4: Equipment
AS ISO 9934.3:2020 Non-destructive testing — Magnetic particle testing, Part 3: Equipment

KR-KS

KS B ISO 9934-3-2022 Non-destructive testing — Magnetic particle testing — Part 3: Equipment
KS B ISO 3452-4-2022 Non-destructive testing — Penetrant testing — Part 4: Equipment

FI-SFS

SFS 3288-1976 Non-destructive testing. Ultrasonic testing. Detect fragment 1

CEN - European Committee for Standardization

EN 12668-3:2000 Non-Destructive Testing - Characterization and Verification of Ultrasonic Examination Equipment - Part 3: Combined Equipment

YU-JUS

JUS N.A5.033-1979 Testing ofprotection against obUque rain. Devicefor checking
JUS N.A5.034-1979 Testing of protection against drops ofwater. Deviceforchecking
JUS C.A7.092-1985 Non destructive testing. Aids to visual inspection. Selection of low-power magnifiers

SE-SIS

MNC 301-1987 Testing equipment - Verification - Summan/
SIS SMS 1191-1970 Fire fighting equipment. Double-acting stirrup pumps. Testing
SIS SMS 1199-1965 Fire fighting equipment. Portable fire extinguishers. Testing

API - American Petroleum Institute

API OSAPR-2-1976 DETECTION AND PREVENTION OF SAND EROSION OF PRODUCTION EQUIPMENT
API REPORT 2-1976 Detection and Prevention of Sand Erosion of Production Equipment

(U.S.) Telecommunications Industries Association

TIA PN 3-0219-2006 Telecommunications Telephone terminal Equipment Measurement Procedures and performance Requirements for Handset Generated In-Band Magnetic Noise Now a published standard - See TIA-1083

Indonesia Standards

SNI ISO 9934-3:2012 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
SNI ISO 16831:2014 Non-destructive testing - ultrasonic testing - characterization and verification of thickness measurement ultrasonic equipment

CH-SNV

SN EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 6.2-2013 Pruefmittelueberwachung - Pruefanweisung fuer Pruefplatten

ECMA - European Association for Standardizing Information and Communication Systems

328-2001 Detection and Measurement of Chemical Emissions from Electronic Equipment