Dielectric Loss Angle of Copper
Dielectric Loss Angle of Copper, Total:84 items.
The international standard classification for "Dielectric Loss Angle of Copper" includes: Rubber , Electronic components in general , Paper and board , Electrical wires and cables , Paper and plastics capacitors , Rotating machinery in general .
The Chinese standard classification for "Dielectric Loss Angle of Copper" includes: Rubber products in general , Special electronic technology material , Paper , Basic standard and general method for synthetic rubber , Cable and its accessory , Technical management , Technical Management , Hydraulic and pneumatic device , Radio Measurement .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 3334-1999 Method of test for dissipation factor ( tgδ)of cable paper at power frequence (Schering bridge method)
- GB/T 1693-1981 Vulcanized rubber--Determination for industrial frequency dielectric constant and dielectricloss angular tangent value
- GB/T 11297.9-1989 Test method for dielectric tangent of loss angle of pyroelectric material
- GB/T 1694-1981 Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value
- GB/T 11297.9-2015 Test method for dielectric tangent of loss angle of pyroelectric materials
- GB/T 3048.11-2007 Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor
- GB/T 14217-1993 Method of test for dielectric dissipation factor (tanδ) of capacitor paper at power frequence
- GB/T 1693-2007 Rubber vulcanized—Determination of dielectric constant and dielectric loss tangent
Professional Standard - Electron
- SJ/T 1147-1993 Test method for dielectric loss angle tangent and dielectric canstant of organic film for use in capacitors
- SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass
Group Standards of the People's Republic of China
- T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
Professional Standard - Aerospace
- QJ 1990.3-1990 Electrical performance test method of electrical insulating adhesives Dielectric loss angle at power frequency and high frequency
Professional Standard - Machinery
- JB/T 7608-2006 Methods and limits for testing the dissipation factor tan δon winding of high voltage AC machine
- JB/T 7608-1994 Test method and limit value of dielectric loss tangent of high voltage AC motor coil
National Metrological Technical Specifications of the People's Republic of China
- JJF 1095-2002 Calibration Specification for Capacitor Dielectric Loss Meters
RO-ASRO
- STAS 2740-1969 Electrical insulation materials. Determination of dielectric constant and dielectric loss angle
- STAS 6799-1981 INSULATING MINERAL OILS Determinations of the permittivity and of the dielectric loss tangent
- STAS 12969-1991 Solid electroinsulating materials. Method for permitivity and lossangle tangent detemination at temperature of 77 K
GOST
- GOST R 71338-2024 Electro-optical elements. Methods for measuring the tangent of dielectric loss angle
- GOST R 71602-2024 Inorganic dielectrics. Method for determining the dielectric constant and the tangent of the dielectric loss angle at a frequency of 1 MHz
- GOST R 71601-2024 Inorganic dielectrics. Method for determining the relative permittivity and the tangent of the dielectric loss angle in the frequency range from 2.5 to 3.5 GHz
- GOST R 71432-2024 Microwave ferrite devices and products made of them. Methods for measuring the complex relative permittivity and the tangent of the dielectric loss angle
IPC - Association Connecting Electronics Industries
- IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
- IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
- IPC TM-650 2.5.5.1B-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)
- IPC TM-650 2.5.5.3C-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)
Gosstandart of Russia
- GOST 26127-1984 Electrical insulating paper. Method for determination of the dielectric loss tangent at 50 Hz frequency
- GOST 25495-1982 Rocks. Method for the determination of permittivity and dielektric loss tangent
- GOST 22372-1977 Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
- GOST 8.358-1979 State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz
British Standards Institution (BSI)
- BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)
- BS DD IEC/PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- BS EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- BS 903-C3:1982 Methods of testing vulcanized rubber.-Determination of loss tangent and permittivity at power and audio frequencies
- BS EN 60512-25-2:2002 Connectors for electronic equipment - Tests and measurements - Test 25b - Attenuation (insertion loss) - Section 2 Attenuation (insertion loss)
- 13/30281457 DC BS EN 62810. Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- PAS 62562-2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Edition 1.0)
- BS 903-C3:1956 Methods of testing vulcanized rubber. Determination of loss tangent and permittivity at power and audio frequencies
- BS 903 Pt.C3:1982 Methods of testing vulcanized rubber. Determination of loss tangent and permittivity at power and audio frequencies
- 09/30174252 DC BS EN 62562. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
German Institute for Standardization
- DIN EN 61189-2-721 E:2013 Draft Document - Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency using split post dielectric resonator (IEC 91/1110/CD:2013)
- DIN EN 62810:2015-12 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015); German version EN 62810:2015
- DIN 57472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN VDE 0472-505:1983-04 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN 57472-505:1983 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
- DIN EN 62562:2011-10 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010); German version EN 62562:2011
International Electrotechnical Commission (IEC)
- IEC 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
- IEC PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
Korean Agency for Technology and Standards (KATS)
- KS C 2150-2008(2018) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2008 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2023 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2150-2008(2023) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
- KS C 2135-1996(2021) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
Association for Electrical, Electronic & Information Technologies (VDE)
- VDE 0472-505-1983 Testing of cables@ wires and flexible cords; loss factor@ dielectric loss coefficient and leakance [VDE Specification]
- VDE 0380-2-1996*DIN IEC 60247:1996 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
Spanish Association for Standardization (UNE)
- UNE-EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (Endorsed by AENOR in July of 2015.)
- UNE-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Endorsed by AENOR in June of 2011.)
European Committee for Electrotechnical Standardization(CENELEC)
- EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
American Society for Testing and Materials (ASTM)
- ASTM D1082-17 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
- ASTM D1082-17(2024) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
- ASTM D2149-13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
Association Francaise de Normalisation
- NF C26-232*NF EN 62810:2018 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- NF EN 62810:2018 Measurement of the complex permitivity of low-loss dielectric rods using the cylindrical cavity method
- NF EN 62562:2011 Resonant cavity method for measuring the complex permittivity of low-loss dielectric plates
- NF C26-296*NF EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates.
Standard Association of Australia (SAA)
- AS 1589:2001 Copper and copper alloy waste fittings
PL-PKN
- PN E04403-1986 Solide electric insulating materials Measurements of the permittivity and dielectric dissipation factor
CZ-CSN
- CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
- CSN 35 8234 Cast.4-1985 Capacitors. Methods of measurement of capacitance and tangent of the loss angle
Danish Standards Foundation
- DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- DANSK DS/EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- DANSK DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- OS GSO IEC 62562:2013 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
GCC Standardization Organization
- GSO IEC 62810:2017 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
Swedish Institute for Standards
- SS-EN 62810:2016 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- SS-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
- SS-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity
Comitato Elettrotecnico Italiano
- CEI EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
- CEI EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
Japanese Industrial Standards Committee (JISC)
- JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor
Ente Nazionale Italiano di Unificazione
- UNI 4289:1972 Tests on plastics. Determination of permittivity and dielectric dissipation factor.
Lithuanian Standards Office
- LST EN 62562-2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010)