spot heating

spot heating, Total:116 items.

The international standard classification for "spot heating" includes: Extraction and processing of petroleum and natural gas , Medical Sciences and health care facilities in general , Heat treatment and coating , Rubber compounding ingredients , Cables , Surface active agents , General standards related to shipbuilding and marine structures , Flat steel products and semi-products .

The Chinese standard classification for "spot heating" includes: Technical management , Thermal Measurement , Marking, packaing, transport and storage , Heat treatment , Carbon black , Cable and its accessory , Chemical additive , Economic management , Steel sheet and strip .

Taiwan Provincial Standard of the People's Republic of China

CNS 15061-2007 Diesel and domestic heating fuels - Determination of cold filter plugging point

Shandong Provincial Standard of the People's Republic of China

DB37/T 3834-2019 Regulations on management of fixed-point refueling, fixed-point insurance, and fixed-point maintenance for official vehicles
DB3705/T 4-2021 Regulations on the management of fixed-point refueling for official vehicles

Professional Standard - Petroleum

SY/T 6381-1998 Heat for heating furnace
SY 6381-2016 Thermal Engineering Measurement of Heating Furnaces Used in Petroleum Industry
SY/T 6381-2016 Heat determination for heating furnace of petroleum industry
SY/T 6381-2008 Heat determination for heating furnace

未注明发布机构

DIN EN ISO 11403-2 E:2012-06 Determination and expression of comparable multipoint properties of plastics Part 2: Thermal and processing properties (draft)
ASTM RR-D02-1452 1999 D6371-Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
DIN EN ISO 11403-2 E:2021-10 Determination and expression of comparable multipoint properties of plastics Part 2: Thermal and processing properties (draft)

National Metrological Verification Regulations of the People's Republic of China

JJG 463-1996 Melting-Point-Measuring Instruments with Thermo-Micro-Method

Group Standards of the People's Republic of China

T/ZZB 1479-2019 Detachable multi-point flexible armored thermocouple for hydrogenation unit
T/QGCML 2674-2023 Stator bar heating equipment that heats quickly and evenly

机械工业部

JB/T 6049-1992 Determination of effective heating zone of heat treatment furnace

Professional Standard - Pharmaceutical Packaging

YBB 0029-2004 Jiare Shensuolü Cedingfa Test method for thermal tensile ratio

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20841-2007 Heating cables with a rated voltage of 300/500 V for comfort heating and prevntion of ice formation
GB/T 1669-2001 Plasticizers--Determination of mass loss on heating
GB/T 9452-2003 Testing method for work zone of heat treatment furnace
GB/T 9452-2012 Testing method for working zone of heat treatment furnace
GB/T 9452-2023 Test method for qualified work zone of heat treatment furnace
GB/T 3780.8-2002 Carbon black--Determiantion of heating loss

Professional Standard-Ships

CB 1081.5-1989 Norm of Working Hour for Hot Working of Special Auxiliary Arms - Heat Treatment

Professional Standard - Ferrous Metallurgy

YB/T 4211-2010 Determination and calculation of heat balance of furnace for CGL

VDI - Verein Deutscher Ingenieure

VDI 3131-1969 Induction heating; characteristics and application

SCC

JIS R 7240:2018 Determination of thermal diffusivity for heat dissipation graphite sheet by a laser spot periodic heating radiation thermometry method
UNE-EN 116/AC:1999 DIESEL AND COMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGIN POINT.
CAN/CGSB-52.36-M88-1988 Dishwashing Machines, Commercial, Single Tank, Heat Sanitizing, Stationary Rack, Electrically, Steam or Gas Heated
DIN EN 116 E:2014 Draft Document - Diesel and domestic heating fuels - Determination of cold filter plugging point by stepwise cooling procedure; German version FprEN 116:2014
BS 4256-3:1972 Specification for oil-burning air heaters-Fixed, flued convector heaters
BS 4256-3:1967 Specification for oil-burning air heaters. Fixed, flued convector heaters
DANSK DS/EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
DANSK DS/ISO 21901:2021 Thermal insulation – Test method for thermal diffusivity – Periodic heat method
MIL MIL-PRF-32046-2003 RATION HEATING UNIT, FIELD FEEDING
BS 4256-2:1972 Specification for oil-burning air heaters-Fixed, flued, fan-assisted heaters
BS 4256-2:1967 Specification for oil-burning air heaters. Fixed, flued, fan-assisted heaters
UNE-EN ISO 5764:2002 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method). (ISO 5764:2002)
BS 3095-1:1980 Methods for determination of the freezing-point depression of milk-Hortvet method and thermistor cryoscope method
BS ISO 871:1996 Plastics. Determination of ignition temperature using a hot-air furnace

CZ-CSN

CSN 30 4152-1966 Heater plugs double pole, conic seal
CSN 35 8535-1968 Methods of testing filament and heater characteristics o? electronic tubes
CSN 25 8150-1966 Thermometers for determination of loss on heating

British Standards Institution (BSI)

BS EN 116:1998 Diesel and domestic heating fuels - Determination of cold filter plugging point
BS ISO 871:2022 Plastics. Determination of ignition temperature using a hot-air furnace
BS EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods

Association Francaise de Normalisation

NF V04-354*NF ISO 6735:1986 Dried milk. Assessment of heat class. Heat-number reference method.
NF E31-510:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW.
NF V04-205*NF EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
NF E31-505*NF EN 13842:2005 Oil fired forced convection air heaters - Stationary and transportable for space heating
NF V04-205:1990 Milk. Determination of freezing point. Thermistor cryoscope method.
NF ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heating method
NF EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
NF C79-620:1985 Chauffage électrique industriel - Unité de chauffage à éléments chauffants blindés
NF D32-330*NF EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods

RU-GOST R

GOST 30562-1997 Milk. Determination of freezing point. Thermistor cryoscope method
GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST R 54311-2011 Insulating refractory products. Accelerated method for determination of permanent change in dimensions on heating

BELST

STB 1999-2009 Building. Installation of heat points and boiler. Quality control

German Institute for Standardization

DIN 44871-1:1987 Electrical heating elements and heating inserts; definitions
DIN 44576-1:1987 Electric room heating; thermal storage floor heating; characteristics of performance; definitions
DIN EN ISO 5764:2009-10 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009); German version EN ISO 5764:2009
DIN CEN/TS 15679:2008 Thermal Modified Timber - Definitions and characteristics; German version CEN/TS 15679:2007

HU-MSZT

MSZ 7045/1-1976 Gas and oil ignition equipment. General standards for hot water heating equipment
MSZ 7822-1982 Heated screw posts

Korean Agency for Technology and Standards (KATS)

KS H ISO 5764:2006 Milk－Determination of freezing point－Thermistor cryoscope method
KS H ISO 5764-2006(2016) Milk－Determination of freezing point－Thermistor cryoscope method
KS H ISO 5764-2023 Milk — Determination of freezing point — Thermistor cryoscope method(Reference Method)
KS M ISO 871:2019 Plastics — Determination of ignition temperature using a hot-air furnace

NL-NEN

NEN 3463-1988 Milk - Determination of the freezing point with a thermistor cryoscope
NEN 3461-1982 Milk - Determination of the freezing point with a thermistor cryoscope (routine method)
NEN 3462-1988 Milk - Determination of the freezing point with a mercury thermometer (reference method)
NEN 3460-1982 Milk - Determination of the freezing point with a mercury thermometer (reference method)
NEN 5065-1988 Central heating radiators and convectors Determination of thermal output

International Organization for Standardization (ISO)

ISO 5764:2009|IDF 108:2009 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:1987 Milk; Determination of freezing point; Thermistor cryoscope method
ISO 5764:2002|IDF 108:2002 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:2002 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
ISO 5764:2002 | IDF 108:2002 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:2009 | IDF 108:2009 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 871:2022 Plastics — Determination of ignition temperature using a hot-air furnace
ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
ISO 871:1996 Plastics - Determination of ignition temperature using a hot-air furnace

RO-ASRO

STAS 11386-1980 Heating and ventilating systems THERMAL OUTPUT DETERMINATION OF HEATING COILS
STAS 11247/1-1979 Central heating plants HERMAL AND HYDRAULICAL HARACTERISTICS OF HEATING APPLIANCES Characteristic quantities
STAS 11435-1980 Heating and ventilating plants DETERMINATION OF THERMAL OUTPUT OF UNITS HEATERS
STAS 11247/3-1980 Central heating plants THERMAL AND HYDRAULICAL CHARACTERISTICS OF HEATING . APPLIANCES etermination of head loss

American Society for Testing and Materials (ASTM)

ASTM D6371-99 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D6371-24 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D6371-17 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D6371-16 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

GSO

GSO ASTM D6371:2013 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
BH GSO ASTM D6371:2015 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
GSO IEC 60800:2013 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation

BE-NBN

NBN-EN 255-1-1990 Heat pump for heating or heating and cooling with an electric compressor. Part 1: Terminology, Definitions and Identification
NBN V 21-005-1988 Milk - Determination of freezing point - Thermistor cryoscope method

International Federation of Trucks and Engines

NAVISTAR CEMS BT-13-2009 Stability Heating Test
NAVISTAR CEMS GT-10-2015 VOID - Heated Paint Stability Test

Society of Automotive Engineers (SAE)

SAE J1310-1993 Electric Engine Preheaters and Battery Warmers for Diesel Engines, Information Report June 1993

ES-AENOR

UNE 9-116-1989 Hydraulic safety components for accumulation heaters. Features and Tests

European Committee for Standardization (CEN)

EN 116:1997 Diesel and Domestic Heating Fuels - Determination of Cold Filter Plugging Point [Use: IP 309/99]
EN ISO 5764:2002 Milk - Determination of Freezing Point - Thermistor Cryoscope Method (Reference Method) ISO 5764: 2002
EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods

VN-TCVN

TCVN 7085-2011 Milk.Determination of freezing point.Thermistor cryoscope method (Reference method)

American National Standards Institute （ANSI)

ANSI/ARI 1160-2004 Performance Rating of Heat Pump Pool Heaters

International Electrotechnical Commission (IEC)

IEC 60800:1992 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation

Japanese Industrial Standards Committee (JISC)

JIS K 7193:1999 Plastics -- Determination of ignition temperature using a hot-air furnace
JIS K 7193:2010 Plastics -- Determination of ignition temperature using a hot-air furnace

US-FCR

FCR UFGS-23 54 16.00 10-2008 HEATING SYSTEM; GAS-FIRED HEATERS

U.S. Air Force

AIR FORCE MS24121 REV A-1956 WIRING HARNESS, SINGLE POINT REFUELING

AT-ON

ONORM DIN 10319-1992 Determination of freezing point of milk - Thermistor cryoscope method

U.S. Military Regulations and Norms

ARMY MIL-HDBK-1407-1998 HEATERS, VEHICULAR COMPARTMENT; HEATERS, COOLANT, ENGINE; HEATERS, SPACE; HEATERS, DUCT-TYPE

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 1160-2004 Performance Rating of Heat Pump Pool Heaters

KR-KS

KS M ISO 871-2019 Plastics — Determination of ignition temperature using a hot-air furnace

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AT-01-8-2-2001 Dual Set Point Control of Open-Loop Heat Pump Systems

PL-PKN

PN E02301-1990 Electroheating installations and their heating devices Classification and definitions