Evaluation Test

Evaluation Test, Total:176 items.

The international standard classification for "Evaluation Test" includes: Medical Sciences and health care facilities in general , Geology. Meteorology. Hydrology , Test conditions and procedures in general .

The Chinese standard classification for "Evaluation Test" includes: Sanitation in general , Oceanology , Basic standards and general methods .

Professional Standard - Hygiene

WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available
WS/T 409-2024 Evaluation of the total analytical error of clinical quantitative detection methods

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27415-2013 Estimate of detection and quantitation limit for analytical method
SN/T 4562-2016 Guidance on measurement uncertainty for GMO testing laboratories
SN/T 4494-2016 Risk assessment guidelines of the pathogenic microorganism for inspection and quarantine laboratories
GB/T 27413-2012 Quality control and quality estimation in petroleum products testing laboratory
GB/T 41165-2021 Accuracy evaluation methods of marine forecast results

Military Standard of the People's Republic of China-General Armament Department

GJB 8969-2017 Inspection and evaluation method of damage effects of integral blast warhead
GJB 8966-2017 Inspection and evaluation method of damage effects of penetrating submunitions
GJB 8970-2017 Inspection and evaluation method of damage effects of integral explosive warhead

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 1893-2023 Inspection and Testing Data Asset Assessment Certification Guide

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 16-2021 Risk assessment management requirements for inspection and testing institutions

Professional Standard - Commodity Inspection

SN/T 2606-2010 Guideline for simple evaluation of food additive intake for import and export
SN/T 3696-2013 Guide for the inspection and risk assessment of export electromechanical products for remanufacturing
SN/T 3836-2014 Risk assessment guide for inspection of old mechanical and electrical products for export

Taiwan Provincial Standard of the People's Republic of China

CNS 11903-1987 Method of Test for Fiber Optic Devices (Evaluating Fungus Resistance of Optical Fibers)

National Metrological Technical Specifications of the People's Republic of China

JJF 2155-2024 Evaluation Requirement for Commutability of Reference Materials in Laboratory Medicine

Group Standards of the People's Republic of China

T/HB 0008-2020 Inspection and testing scientific and technological achievements transformation service standardization income evaluation and distribution
T/CSGPC 030-2024 Quality inspection and acceptance of drainage pipeline inspection and evaluation results
T/HCAA 001-2021 Guide to risk assessment for food inspection and testing institutions
T/CASEI 033-2024 Inspection and security evaluation of gaspiping in service
T/CHSA 002-2020 Standards for periodontal basic examination and evaluation
T/CITS 0107-2024 Motor vehicle inspection—Competence verification and certification of MVI personnel
T/CMES 16005-2022 Guidelines for the assessment and inspection of pressure vessel exceeding the design service life
T/GAIA 002-2019 Inspection and testing scientific and technological achievements transformation service standardization results evaluation
T/EJCCCSE 406-2025 Technical Specifications for Risk Assessment and Online Inspection of Tank Breathing Valves

Anhui Provincial Standard of the People's Republic of China

DB3411/T 0055-2024 The Guidelines for Risk Assessment in Intelligent Home Appliances Testing Laboratory
DB34/T 4433-2023 Technical specification for impartiality risk assessment of testing laboratories

Professional Standard - Agriculture

CNAS-GL043-2020 Guidelines for the Evaluation of Uncertainty in Measurement of ELISA Tests in Veterinary Testing Laboratories

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3697-2019 Technical specification for reliability inspection and evaluation of existing building curtain walls

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1999-2012 Technical specification for inspection and evaluation of reliability of curtain wall of existing buildings

Shandong Provincial Standard of the People's Republic of China

DB37/T 291-2000 Computer Network Detection and Evaluation

German Welding Society

DVS 2207-5 Beiblatt 2:2017-02 PE-HD pipe welding inspection and evaluation methods

American Petroleum Institute (API)

API PUBL 4451-1987 Assessing Natural Resource Damages from Hazardous Substances: An Examination of Existing Assessment Approaches
API PUBL 325-1994 Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks
API PUBL 306-1991 An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 307-1992 Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 307-1991 An Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API RP 982-2023 Inspection and Assessment of Refractory Linings

American Society of Mechanical Engineers (ASME)

ASME SEC XI D1 ART IWF-3000-2002 Article IWF-3000 Standards for Examination Evaluations
ASME SEC XI D3 ART IMA-3000-2001 Article IMA-3000 Standards for Examination Evaluation
ASME SEC XI D3 ART IMF-3000-2001 Article IMF-3000 Standards for Examination Evaluations
ASME SEC XI D1 ART IWA-3000-2003 Article IWA-3000 Standards for Examination Evaluation

Japanese Industrial Standards Committee (JISC)

JIS K 0550:1994 Testing methods for detection and estimation of micro-biological contaminants in highly purified water

American Society for Testing and Materials (ASTM)

ASTM D660-93(2011) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D660-11 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM F1158-94 Standard Guide for Inspection and Evaluation of Tampering of Security Seals
ASTM G46-76(1986)e1 Standard Practice for Examination and Evaluation of Pitting Corrosion
ASTM E3408/E3408M-23 Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
ASTM E1595-98 Evaluating the Performance of Mechanical Testing Laboratories
ASTM E3147-25 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems
ASTM E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems
ASTM D660-44(1970) Standard Method Of Evaluating Degree Of Resistance To Checking Of Exterior Paints
ASTM D7688-11(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

South African Bureau of Standard

F 206-02 Recommendation Report: Inspection Body Pre-assessment
F 119-08 Assessment Cycle Matrix for ISO/IEC 17020:2012 Inspection Bodies
F 82-10 Vertical Assessment - Inspection. ISO/IEC 17020:2012
SANS 60890:1987 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear

Polski Komitet Normalizacyjny (PKN)

PN P84685-1992 Labour protection. Cold protetive clothing. Physiological methods of examination and evaluation

Comitato Elettrotecnico Italiano

CEI UNI ISO/IEC TS 17035:2024 Conformity Assessment – Guidelines for Validation and Verification Programs

Ente Nazionale Italiano di Unificazione

UNI CEI EN 45002:1990 General criteria for the assessment of testing laboratories.
UNI EN ISO 5350-1:2004 Pulp - Estimation of dirt and shives - Inspection of laboratory sheets
UNI EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
UNI EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
UNI EN ISO 105-B05:1998 Textiles - Tests for colour fastness - Detection and assessment of photochromism.
UNI 8056:1980 Textiles. Tests for colour fastness. Method for detection and assessment of photochromism to xenon artificial light.
UNI EN ISO 18490:2015 Non-destructive Testing - Evaluation of vision acuity of NDT personnel
UNI EN 14240:2005 Ventilation for buildings - Chilled ceilings - Testing and rating
UNI EN 14602:2012 Footwear - Test methods for the assessment of ecological criteria
UNI EN 14602:2005 Footwear - Test methods for the assessment of ecological criteria

Clinical and Laboratory Standards Institute

CLSI QMS17-2017 External Assessment, Audit and Inspection Laboratories

Standards Norway

NS-EN 45002:1989 General criteria for the assessment of testing laboratories

Standard Association of Australia （SAA）

MP 68-1992 Test method assessment sheet
AS 5100.4:2017*AP-G51.4-17 Bridges – Assessment and monitoring

German Institute for Standardization

DIN EN 45002:1990 General Criteria for Evaluating Testing Laboratories
DIN EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures; German version EN 14136:2004
DIN 19293:2025-04 Non-destructive testing – Evaluation of testing data – Guideline to estimate the reliability of applications
DIN 10952-1:1978 Sensory evaluation method Evaluation test method with scale
DIN 10963:1997 Sensory testing methods - Ranking method
DIN EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method; German version EN 12544-1:1999
DIN 19293 E:2025-04 Draft Document - Non-destructive testing - Evaluation of testing data - Guideline to estimate the reliability of applications; Text in English
DIN EN 13160-4 E:2014-10 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
DIN EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method; German version EN 12544-3:1999
DIN 52106 E:2012-09 Draft Document - Testing of aggregates - Test methods for the assessment of the weathering resistance
DIN IEC 62957-1:2018-07*VDE 0493-6-1:2018-07 Radiation protection instrumentation – Semi-empirical method for performance evaluation of detection and radionuclide identification
DIN VDE 0660-507:1997 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890:1987 + Corrigendum 1988 + A1:1995); German version HD 528 S2:1997

Swiss Association for Standardization (SNV)

SNV 24505-1937 Textiles: color fastness testing. Principles for performing inspections and evaluating inspection results (Principles)

Gosstandart of Russia

GOST 30975-2002 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
GOST ISO 17640-2021 Non-destructive testing of welded joints. Ultrasonic testing. Methods, levels of testing and assessment
GOST 33298-2015 Residual fuel oils. Test for straight-run. Method for evaluation of flocculation

International Organization for Standardization (ISO)

ISO 7087:1984 Ferroalloys; Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 16145-5:2014 Ships and marine technology - Protective coatings and inspection method - Part 5: Assessment method for coating damages
ISO 9497:1993 Flourspar; experimental methodes for evaluation of quality variation

British Standards Institution (BSI)

BS EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method
BS EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method
BS EN 12544-2:2000(2008) Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method
BS EN 12544-3:1999(2008) Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method
BS EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method
BS EN 12544-1:1999(2008) Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method
BS ISO 16145-5:2014 Ships and marine technology. Protective coatings and inspection method. Assessment method for coating damages
BS EN ISO 5350-1:1998 Pulps. Estimation of dirt and shives-Inspection of laboratory sheets
BS EN 13160-3:2016+A1:2024 Leak detection systems - Requirements and test/assessment methods for liquid systems for tanks
BS EN 14602:2004 Footwear - Test methods for the assessment of ecological criteria
BS EN 14602:2012 Footwear. Test methods for the assessment of ecological criteria

American Wood Protection Association

AWPA M22-18 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-21 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-19 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-11 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-24 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-13 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-15 Standard for Third-Party Agency Evaluation of Inspection Data
AWPA M22-22 Standard for Third-Party Agency Evaluation of Inspection Data

Association for Electrical, Electronic & Information Technologies (VDE)

VDE-Schriftenreihe Band 173:2018 Fire protection technical evaluation and inspection of electrical installations

Korean Agency for Technology and Standards (KATS)

KS B ISO 12710:2005 Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 3059-2016(2021) Non-destructive testing－Methods for indirect assessment of black light sources
KS A 7002-1982 FLAVOR EVALUATION METHOD BY SENSORY TESTING
KS A 7002-1992(2003) FLAVOR EVALUATION METHOD BY SENSORY TESTING
KS M 1430-2004 Testing methods for performance evaluation of media
KS E ISO 8542-2003(2019) Manganese and chromium ores - experimental methods for quality deviation evaluation methods and sampling precision inspection methods
KS K 0750-2007 Test method for the detection and assessment of photochromism
KS C IEC 61193-2:2009 Quality assessment systems-Part 2:Selection and use of sampling plans for inspection of electronic components and packages
KS V ISO 16145-5-2022 Ships and marine technology — Protective coatings and inspection method — Part 5: Assessment method for coating damages
KS A IEC 61710-2003(2023) Power/power law model - goodness-of-fit test and estimation methods
KS B 0518-2009 Standard qualification procedure for gas pressure welding technique
KS V 3986-2012(2017) Test method of evaluating performance for oil skimmer
KS E ISO 3084-2006(2016) Iron ores - Experimental methods for evaluation of quality variation

Association of German Mechanical Engineers

VDI 4487-2016 Examination of quality-related properties of winding stretch film - Valuation methods@ and criteria
VDI 4487-2017 Testing of quality-relevant properties of stretch wrap films — evaluation methods and criteria

European Committee for Standardization (CEN)

EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures
EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method
EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method
EN 14602:2012 Footwear - Test methods for the assessment of ecological criteria

National Association of Corrosion Engineers (NACE)

NACE Paper 13326-2019 High Temperature Hydrogen Attack Life Assessment Modeling and Inspection
NACE Paper 04183-2004 METHODOLOGY FOR STATISTICALLY DESIGNING AND ASSESSING METAL LOSS IN-LINE INSPECTION VALIDATION PROGRAMS

Associação Brasileira de Normas Técnicas

ABNT P-MB-413-1966 Discoloration Detection and Evaluation

GCC Standardization Organization

GSO OIML D30:2024 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
GSO OIML D30:2021 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
GSO ISO 16145-5:2016 Ships and marine technology -- Protective coatings and inspection method -- Part 5: Assessment method for coating damages

Magyar Szabványügyi Testület

MSZ 16950/3-1978 Heat resistance testing of electrical insulation materials. assessment method
MSZ 6495-1961 Motorcycle Assessment Inspection
MSZ 6827/2-1982 Powdered egg sampling, testing and evaluation
MSZ 6575/1.lap-1961 Detection and evaluation testing of current layer

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO OIML D30:2022 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
BH GSO ISO 16145-5:2017 Ships and marine technology -- Protective coatings and inspection method -- Part 5: Assessment method for coating damages
BH GSO ISO 13496:2024 Meat and meat products — Detection and determination of colouring agents

Canadian Standards Association (CSA)

CSA/ANSI HGV 4.3-2019 Test methods for hydrogen fueling parameter evaluation
CSA ANSI HGV 4.3-2019 Test methods for hydrogen fueling parameter evaluation
CSA/ANSI HGV 4.3-2022 Test methods for hydrogen fuelling parameter evaluation
CSA ANSI/CSA HGV 4.3-2016 Test methods for hydrogen fueling parameter evaluation
CSA ANSI HGV 4.3-2024 Test methods for hydrogen fuelling parameter evaluation

Network Rail

NR TEF 3300 ISSUE 2-2023 Crossing Inspection Risk Assessment

National Standardisation Body (ASRO)

STAS 12525/1-1986 ASSESSING FIRE HAZARD WITH GLOW-WIRE Test method

Bureau of Indian Standards

IS 5401-1969 Methods for detection and assessment of E. coli in food
IS 6009-2024 Evaluation of Results of Accelerated Corrosion Test - Method

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4184.1:1994 Evaluation and routine testing in medical imaging departments - General aspects
AS/NZS 4184.2.5:1995 Evaluation and routine testing in medical imaging departments - Constancy tests - Image display devices

Association Francaise de Normalisation

NF Q50-018-1*NF EN ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1 : inspection of laboratory sheets by transmitted light
NF EN ISO 17640:2018 Non-destructive testing of welded assemblies - Ultrasonic testing - Techniques, test levels and evaluation

International Electrotechnical Commission (IEC)

IEC 61193-2:2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages

Indonesia Standards

SNI 0277:2013 Tekstil - Kain tenun - Cara uji dan penilaian cacat - Sistem penilaian 10 poin

International Dairy Federation (IDF)

IDF 128-3-2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis

American Water Works Association (AWWA)

AWWA JAW46125 Journal AWWA — Evaluation of Optical Detection Methods for Waterborne Suspensions

Swedish Institute for Standards

SS-EN 14602:2005 Footwear - Test methods for the assessment of ecological criteria

Food and Agriculture Organization of the United Nations (FAO)

CAC/GL 27-1997 Guidelines for the Assessment of the Competence of Testing Laboratories Involved in the Import and Export Control of Foods

The Society for Protective Coatings (SSPC)

SSPC QP 5-2012 Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies
QP 5-2012 Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies
QP 5-1999 Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies

Spanish Association for Standardization (UNE)

UNE 34400-4:1971 TEST METHODS OF WHEAT FLOUR. COLOUR ESTIMATION
UNE-EN 14602:2005 Footwear - Test methods for the assessment of ecological criteria

Türk Standardları Enstitüsü

TS 2909-1977 IRON ORES - EXPERIMENTAL METHODS FOR EVALUATION OP QUALITY VARIATION

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 16145-5:2016 Ships and marine technology -- Protective coatings and inspection method -- Part 5: Assessment method for coating damages

(U.S.) Telecommunications Industries Association

TIA-455-56-C-2009(2017) Test Method For Evaluating Fungus Resistance of Optical Fiber and Cable
TIA-455-56-C-2009 Test Method For Evaluating Fungus Resistance of Optical Fiber and Cable

Others: test method,Specific gravity test,Evaluation method,Magnetic test method,Business Test Act,Quantitative test,median test,t-test method+,Evaluation result inspection,f-test,t-test,Quantitative Evaluation,pcr test method,Evaluation Test,Evaluation test,How to evaluate the inspection equipment,Qualitative test,Evaluation Test,Test method evaluation