What is the thickness of the film in millimeters?

What is the thickness of the film in millimeters?, Total:59 items.

The international standard classification for "What is the thickness of the film in millimeters?" includes: .

The Chinese standard classification for "What is the thickness of the film in millimeters?" includes: .

American Society for Testing and Materials (ASTM)

ASTM D4801-08(2025) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

ISUZU - Isuzu Motors Ltd.

ISA-E-008A-2002 General Tolerances for Press Work on Materials@ 3.2mm (max) in Thickness (Japanese/English Version)
ISA-E-008B-2008 General Tolerances for Press Work on Materials@ 3.2mm (max) in Thickness (Japanese/English Version)

Danish Standards Foundation

DS/EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
DS/EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
DANSK DS/EN 2131:2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm < a < 160 mm - Dimensions
DANSK DS/EN 2617:2001 Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm < a < 100 mm - Dimensions
DANSK DS/EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm
DANSK DS/EN 2599:2001 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions
DANSK DS/EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm < a < 6 mm - Dimensions
DANSK DS/EN 3506:2001 Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm < a < 100 mm - Dimensions

Spanish Association for Standardization (UNE)

UNE-EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
UNE-EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
UNE-EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm
AENOR UNE-EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

Lithuanian Standards Office

LST EN 15836-1-2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
LST EN 15836-2-2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO EN 15836-2:2022 Plastics- Plasticized poly (vinyl chloride) (PVC-P) membranes for inground swimming pools Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
BH GSO EN 1253-1:2023 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

GM Global

GMW 16170-2011 Thin Film; Nanometers Thick (NT) Pretreatment Generic Qualifications Issue 2; English

Ente Nazionale Italiano di Unificazione

UNI EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
UNI EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
UNI EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm
UNI 7796:2010 Anodic oxidation coatings on aluminium and aluminium alloys - Hard anodic films of great thickness - Requirements and general instructions of test

GCC Standardization Organization

GSO EN 15836-2:2021 Plastics- Plasticized poly (vinyl chloride) (PVC-P) membranes for inground swimming pools Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
GSO EN 1253-1:2022 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

Swedish Institute for Standards

SS-EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
SS-EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

AT-ON

ONORM M 9017-1996 Machine tools - Acceptance conditions for lathes of normal accuracy - Swing above 800 mm up to 1600 mm
ONORM M 9016-1996 Machine tools - Acceptance conditions for lathes of normal accuracy - Swing up to 800 mm

German Institute for Standardization

DIN EN 15836-1 E:2008-07 Draft Document - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0.75 mm; German version prEN 15836-1:2008
DIN EN 15836-2 E:2008 Draft Document - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1.5 mm; German version prEN 15836-2:2008
DIN EN 15836-2 E:2008-07 Draft Document - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1.5 mm; German version prEN 15836-2:2008
DIN EN 15836-1 E:2008 Draft Document - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0.75 mm; German version prEN 15836-1:2008
DIN EN 1253-1:2015-03 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; German version EN 1253-1:2015
DIN EN 1253-1 E:2013 Draft Document - Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; German version prEN 1253-1:2013

British Standards Institution (BSI)

BS 5550-5.4.6:1988 Cinematography. Common to more than one film gauge. Sound. Method for measurement of the signal to noise ratio of 8 mm type, 16 mm and 35 mm variable area photographic sound records
08/30181781 DC BS EN 15836-2. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 2. Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
08/30181778 DC BS EN 15836-1. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 1. Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
BS 5550-5.5.2:1978 Cinematography. Common to more than one film gauge. Printing-Specification for leaders and run-out trailers for 35 mm and 16 mm release prints
BS ISO 4386-1:2019 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
13/30260528 DC BS EN 1253-1. Gullies for buildings. Part 1. Trapped floor gullies with a depth water seal of at least 50 mm
BS 5550-5.2.1:1987 Cinematography. Common to more than one film gauge. Image areas-Specification for dimensions and locations of the maximum permissible area for subtitles on 35 mm and 16 mm motion-picture release prints
BS 5550-5.4.3:1987 Cinematography. Common to more than one film gauge. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for three-, four- or six-track magnetic sound records on 35 mm and single-track on 17.5 mm motion-picture...

International Committee for Information Technology Standards (INCITS)

INCITS 179-2017 Information Systems - Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 9.5-mm (3.740-in) Outer Diameter and 25-mm (0.984-in) Inner Diameter and 1 .27-mm (0.050-in) Thickness
INCITS 179-1990 Information Systems - Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 9.5-mm (3.740-in) Outer Diameter and 25-mm (0.984-in) Inner Diameter and 1.27-mm (0.050-in) Thickness
INCITS 179-1990(R1995) Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 95-mm (3.740 in) Outer Diameter and 25-mm (0.984 in) Inner Diameter and 1.27-mm (0.050 in) Thickness (formerly ANSI X3.179-1990(R1995))

ANSI - American National Standards Institute

X3.179-1990 Information Systems - Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 95-mm (3.740-in) Outer Diameter and 25-mm (0.984-in) Inner Diameter and 1.27-mm (0.050-in) Thickness

Standards Norway

NS-EN 2071:2001 Aerospace series — Sheets in aluminium and aluminium alloys — Thickness 0,25 mm < a < 6 mm — Dimensions
NS-EN 1253-1:2015 Gullies for buildings — Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

IT-UNI

UNI 6659-1978 Non-alloy hot rolled flat steel finished products. Thin steel plates and wide steel strips with thickness <3 mm for general purposes. Quality, regulations and testing

Association Francaise de Normalisation

NF P16-330-1*NF EN 1253-1:2015 Gullies for buildings - Part 1 : trapped floor gullies with a depth water seal of at least 50 mm
NF EN ISO 11833-2:2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: sheets and films with a thickness of less than 1 mm
NF EN 6025:2021 Aerospace series - Plates - 2024 aluminum alloy - Tight flatness tolerances - Thickness - 6 mm < a < less than or equal to 55 mm - Dimensions

RO-ASRO

STAS 4293-1987 DIAL GAUGES HAVING 0,01 mm DIVISIONS Genera] teclmical requirements for quality

Japanese Industrial Standards Committee (JISC)

JIS K 5600-1-7:1999 Testing methods for paints -- Part 1: General rule -- Section 7: Determination of film thickness
JIS K 5600-1-7:2014 Testing methods for paints.Part 1: General rule.Section 7: Determination of film thickness

Korean Agency for Technology and Standards (KATS)

KS B ISO 4386-2-2016(2021) Plane bearings－Metallic multilayer plain bearings－Part 2：Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm

YU-JUS

JUS M.C3.328-1988 Plain bearings. MetaliJe multilayer plain bearings. Non-destructive ultrasonic testing of boud for bearing metal layer tbicknesses above Z mm

Others: What is the thickness of the film in millimeters?