gb11164-2011
gb11164-2011, Total:498 items.
The international standard classification for "gb11164-2011" includes: Vacuum technology .
The Chinese standard classification for "gb11164-2011" includes: Chain drive, belt drive and key joint .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 11164-2011 Vacuum coating plant generic specification
Shaanxi Provincial Standard of the People's Republic of China
- DB61/T 1142.40-2018 Tomato Wesfarmers 2011
未注明发布机构
- RUL FP.1-2011 Standard Ruling FP.1-2011
- EU No 305-2024 Regulation (EU) No 305/2011 of the European Parliament and of the Council
Association for Electrical, Electronic & Information Technologies (VDE)
- VDE 0715-14-2011 Leuchtstoff-Induktionslampen - Sicherheitsanforderungen (IEC 62532:2011); Deutsche Fassung EN 62532:2011
- VDE 0370-3-2012 Verfahren zur Probennahme von Isolierfluessigkeiten (IEC 60475:2011); Deutsche Fassung EN 60475:2011
- VDE 0616-2 BERICHTIGUNG 1-2013 Bajonett-Lampenfassungen (IEC 61184:2008 + Cor. :2009 + A1:2011); Deutsche Fassung EN 61184:2008 + A1:2011@ Berichtigung zu DIN EN 61184 (VDE 0616-2):2011-12; (IEC-Cor. 2:2012 zu IEC 61184:2008 + A1:2011)
- VDE 0712-23-2012 Wechsel- und/oder gleichstromversorgte elektronische Betriebsgeraete fuer roehrenfoermige Leuchtstofflampen - Anforderungen an die Arbeitsweise (IEC 60929:2011 + Cor. :2011); Deutsche Fassung EN 60929:2011 + AC:2011
- VDE 0435-120-2012 Elektromechanische Elementarrelais - Teil 2: Funktionsfaehigkeit (Zuverlaessigkeit) (IEC 61810-2:2011); Deutsche Fassung EN 61810-2:2011
- VDE 0750-11-2012 Akustik - Hoergeraete - Teil 13: Elektromagnetische Vertraeglichkeit (EMV) (IEC 60118-13:2011); Deutsche Fassung EN 60118-13:2011
- VDE 0341-2-2012 Isolierschlaeuche - Teil 2: Pruefverfahren (IEC 60684-2:2011); Deutsche Fassung EN 60684-2:2011
- VDE 0414-9-5-2012 Messwandler - Teil 5: Zusaetzliche Anforderungen fuer kapazitive Spannungswandler (IEC 61869-5:2011); Deutsche Fassung EN 61869-5:2011
- VDE 0750-2-12-2012 Medizinische elektrische Geraete - Teil 2-12: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Beatmungsgeraeten fuer die Intensivpflege (ISO/IEC 80601-2-12:2011 + Cor. :2011); Deutsche Fassung EN ISO 80601
- VDE 0185-236-2011 Blitzschutz - Gewitterwarnsysteme; Deutsche Fassung EN 50536:2011 + AC:2011
- VDE 0712-33-2012 Geraete fuer Lampen- Teil 2-3: Besondere Anforderungen an wechsel- und/oder gleichstromversorgte elektronische Betriebsgeraete fuer Leuchtstofflampen (IEC 61347-2-3:2011 + Cor. :2011); Deutsche Fassung EN 61347-2-3:2011 + AC:2011
- VDE 0604-100-2015 Stromschienensysteme - Teil 1: Allgemeine Anforderungen (IEC 61534-1:2011 + A1:2014); Deutsche Fassung EN 61534-1:2011 + A1:2014
- VDE 0532-76-1-2012 Leistungstransformatoren - Teil 1: Allgemeines (IEC 60076-1:2011); Deutsche Fassung EN 60076-1:2011
- VDE 0553-100-2014 Statische Blindleistungskompensatoren (SVC) - Pruefung von Thyristorventilen (IEC 61954:2011 + A1:2013); Deutsche Fassung EN 61954:2011 + A1:2013
- VDE 0414-9-3-2012 Messwandler - Teil 3: Zusaetzliche Anforderungen fuer induktive Spannungswandler (IEC 61869-3:2011); Deutsche Fassung EN 61869-3:2011
- VDE 0616-1-2011 Lampenfassungen mit Edisongewinde (IEC 60238:2004 + A1:2008 + A2:2011); Deutsche Fassung EN 60238:2004 + Cor. :2005 + A1:2008 + A2:2011
- VDE 0616-2-2011 Bajonett-Lampenfassungen (IEC 61184:2008 + Cor. :2009 + A1:2011); Deutsche Fassung EN 61184:2008 + A1:2011
- VDE 0705-2512-2012 Elektrische Wasch-Trockner fuer den Hausgebrauch - Pruefverfahren zur Bestimmung der Gebrauchseigenschaften (IEC 59D/390/CDV:2011); Deutsche Fassung FprEN 62512:2011
- VDE 0544-13-2012 Lichtbogenschweisseinrichtungen - Teil 13: Schweissstromrueckleitungsklemmen (IEC 60974-13:2011); Deutsche Fassung EN 60974-13:2011
- VDE 0712-0-210-2012 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 210: Besondere Anforderungen an Betriebsgeraete - Sequenzer (Geraetetyp 9) (IEC 62386-210:2011); Deutsche Fassung EN 62386-210:2011
- VDE 0832-100-2011 Strassenverkehrs-Signalanlagen; Deutsche Fassung EN 50556:2011
- VDE 0847-21-8-2012 Integrierte Schaltungen - Messung von elektromagnetischen Aussendungen - Teil 8: Messung der abgestrahlten Aussendungen - IC-Streifenleiterverfahren (IEC 61967-8:2011); Deutsche Fassung EN 61967-8:2011
- VDE 0390-4-2012 Supraleitfaehigkeit - Teil 4: Messung des Restwiderstandsverhaeltnisses - Restwiderstandsverhaeltnis von Nb-Ti Verbundsupraleitern (IEC 61788-4:2011); Deutsche Fassung EN 61788-4:2011
- VDE 0660-511-2012 Leergehaeuse fuer Niederspannungs-Schaltgeraetekombinationen - Allgemeine Anforderungen (IEC 62208:2011); Deutsche Fassung EN 62208:2011
- VDE 0532-41-2012 Stromrichtertransformatoren - Teil 1: Transformatoren fuer industrielle Anwendungen (IEC 61378-1:2011); Deutsche Fassung EN 61378-1:2011
- VDE 0674-19-03-2012 Durchfuehrungen fuer Gleichspannungsanwendungen (IEC 36A/151/CD:2011)
- VDE 0390-15-2012 Supraleitfaehigkeit - Teil 15: Messungen der elektronischen Charakteristik - Oberflaechenimpedanz von Supraleiterschichten bei Mikrowellenfrequenzen (IEC 61788-15:2011); Deutsche Fassung EN 61788-15:2011
- VDE 0390-6-2012 Supraleitfaehigkeit - Teil 6: Messung der mechanischen Eigenschaften - Messung der Zugfestigkeit von Cu/Nb-Ti-Verbundsupraleitern bei Raumtemperatur (IEC 61788-6:2011); Deutsche Fassung EN 61788-6:2011
- VDE 0509-5-2012 Primaerbatterien - Teil 5: Sicherheit von Batterien mit waessrigem Elektrolyt (IEC 60086-5:2011); Deutsche Fassung EN 60086-5:2011
- VDE 0532-76-2-2012 Leistungstransformatoren - Teil 2: Uebertemperaturen fuer fluessigkeitsgefuellte Transformatoren (IEC 60076-2:2011); Deutsche Fassung EN 60076-2:2011
- VDE 0565-17-2012 Verfahren zur Messung der Entstoereigenschaften von passiven EMV-Filtern (CISPR 17:2011); Deutsche Fassung EN 55017:2011
- VDE 0532-76-16-2012 Leistungstransformatoren - Teil 16: Transformatoren fuer Windenergieanlagen-Anwendungen (IEC 60076-16:2011); Deutsche Fassung EN 60076-16:2011
- VDE 0126-14-2-2012 Sicherheit von Leistungsumrichtern zur Anwendung in photovoltaischen Energiesystemen - Teil 2: Besondere Anforderungen an Wechselrichter (IEC 62109-2:2011); Deutsche Fassung EN 62109-2:2011
- VDE 0544-202-2012 Lichtbogenschweisseinrichtungen - Teil 12: Steckverbindungen fuer Schweissleitungen (IEC 60974-12:2011); Deutsche Fassung EN 60974-12:2011
- VDE 0682-312-2012 Arbeiten unter Spannung - Elektrisch isolierende Aermel (IEC 78/926/CD:2011)
- VDE 0888-100-1-2012 Lichtwellenleiterkabel - Teil 1-1: Fachgrundspezifikation - Allgemeines (IEC 60794-1-1:2011); Deutsche Fassung EN 60794-1-1:2011
- VDE 0705-456-2012 Waschmaschinen fuer den Hausgebrauch - Verfahren zur Messung der Gebrauchseigenschaften (IEC 60456:2010@ modifiziert); Deutsche Fassung EN 60456:2011 + AC:2011
- VDE 0115-404-2012 Bahnanwendungen - Elektrische Zugfoerderung - Umrichtergespeiste Asynchron-Linearmotoren des Kurzstatortyps (LIM) (IEC 62520:2011); Deutsche Fassung EN 62520:2011
- VDE 0712-23-2016 Wechsel- und/oder gleichstromversorgte elektronische Betriebsgeraete fuer roehrenfoermige Leuchtstofflampen - Anforderungen an die Arbeitsweise (IEC 60929:2011 + Cor.:2011 + A1:2015); Deutsche Fassung EN 60929:2011 + AC:2011 + A1:2016
- VDE 0721-6-2011 Sicherheit in Elektrowaermeanlagen - Teil 6: Sicherheitsanforderungen fuer industrielle Mikrowellen-Erwaermungseinrichtungen (IEC 60519-6:2011); Deutsche Fassung EN 60519-6:2011
- VDE 0530-16-2011 Drehende elektrische Maschinen - Teil 16-1: Erregersysteme fuer Synchronmaschinen - Begriffe (IEC 60034-16-1:2011); Deutsche Fassung EN 60034-16-1:2011
- VDE 0687-76-2-2012 Steckverbinder fuer elektronische Einrichtungen - Produktanforderungen - Teil 2: Rahmenspezifikation fuer Rundsteckverbinder (IEC 61076-2:2011); Deutsche Fassung EN 61076-2:2011
- VDE 0101-1-2014 Starkstromanlagen mit Nennwechselspannungen ueber 1 kV - Teil 1: Allgemeine Bestimmungen (IEC 61936-1:2010@ modifiziert + Cor.:2011 + A1:2014); Deutsche Fassung EN 61936-1:2010 + AC:2011 + AC:2013 + A1:2014
- VDE 0750-2-61-2012 Medizinische elektrische Geraete - Teil 2-61: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Pulsoximetriegeraeten (ISO 80601-2-61:2011); Deutsche Fassung EN ISO 80601-2-61:2011
- VDE 0309-3-3-2012 Zellulosefreie Papiere fuer elektrotechnische Zwecke - Teil 3: Bestimmungen fuer einzelne Materialien - Blatt 3: Ungefuellte Aramid-(aromatische Polyamid-)Papiere (IEC 60819-3-3:2011); Deutsche Fassung EN 60819-3-3:2011
- VDE 0750-2-55-2012 Medizinische elektrische Geraete - Teil 2-55: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Ueberwachungsgeraeten fuer Atemgase (ISO 80601-2-55:2011); Deutsche Fassung EN ISO 80601-2-55:2011
- VDE 0837-4-2011 Sicherheit von Lasereinrichtungen - Teil 4: Laserschutzwaende (IEC 60825-4:2006 + A1:2008 + A2:2011); Deutsche Fassung EN 60825-4:2006 + A1:2008 + A2:2011
- VDE 0888-321-2011 Lichtwellenleiter - Teil 2-10: Produktspezifikationen - Rahmenspezifikation fuer Mehrmodenfasern der Kategorie A1 (IEC 60793-2-10:2011); Deutsche Fassung EN 60793-2-10:2011
- VDE 0185-236/A1-2013 Blitzschutz - Gewitterwarnsysteme; Deutsche Fassung EN 50536:2011/A1:2012
- VDE 0687-76-2-001-2012 Steckverbinder fuer elektronische Einrichtungen - Produktanforderungen - Teil 2-001: Rundsteckverbinder - Vordruck fuer Bauartspezifikation (IEC 61076-2-001:2011); Deutsche Fassung EN 61076-2-001:2011
- VDE 0682-311-2012 Arbeiten unter Spannung - Elektrisch isolierende Handschuhe (IEC 78/925/CD:2011)
- VDE 0390-11-2012 Supraleitfaehigkeit - Teil 11: Messung des Restwiderstandsverhaeltnisses - Restwiderstandsverhaeltnis von Nb 3 Sn-Verbundsupraleitern (IEC 61788-11:2011); Deutsche Fassung EN 61788-11:2011
British Standards Institution (BSI)
- BS 3546:2001(2011)
- BS 7373-2:2001(2011)
- BS PD ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors. Application of concepts
German Institute for Standardization
- DIN EN 60929:2012-05 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011 + Cor. :2011); German version EN 60929:2011 + AC:2011
- DIN EN 50536:2011-11 Protection against lightning - Thunderstorm warning systems; German version EN 50536:2011 + AC:2011
- DIN EN 61199:2012-10 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011); German version EN 61199:2011
- DIN EN ISO 6875:2011 Dentistry - Patient chair (ISO 6875:2011); German version EN ISO 6875:2011
- DIN EN IEC 62554:2018-08 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011 + A1:2017); German version EN 62554:2011 + EN IEC 62554:2011/A1:2018
- DIN EN ISO 5912:2012 Camping tents (ISO 5912:2011); German version EN ISO 5912:2011
- DIN EN IEC 62554:2018 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011 + A1:2017); German version EN 62554:2011 + EN IEC 62554:2011/A1:2018
- DIN EN 60929:2012 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011 + Cor. :2011); German version EN 60929:2011 + AC:2011
- DIN EN ISO 14585:2011 Hexalobular socket pan head tapping screws (ISO 14585:2011); German version EN ISO 14585:2011
- DIN EN 60505 Berichtigung 1:2017 Evaluation and qualification of electrical insulation systems (IEC 60505:2011); German version EN 60505:2011, Corrigendum to DIN EN 60505 (VDE 0302-1):2012-05, (IEC 60505:2011/COR1:2017); German version EN 60505:2011/AC:2017-03
- DIN EN ISO 14155:2012 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011 + Cor. 1:2011); German version EN ISO 14155:2011 + AC:2011
- DIN EN ISO 14586:2011 Hexalobular socket countersunk head tapping screws (ISO 14586:2011); German version EN ISO 14586:2011
- DIN EN ISO 5912:2013 Camping tents (ISO 5912:2011); German version EN ISO 5912:2011
- DIN EN 62541-6:2012-06 OPC unified architecture - Part 6: Mappings (IEC 62541-6:2011); English version EN 62541-6:2011
- DIN EN 61954:2012 Static VAR compensators (SVC) - Testing of thyristor valves (IEC 61954:2011); German version EN 61954:2011
- DIN EN 61347-2-3:2012-05 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011 + Cor. :2011); German version EN 61347-2-3:2011 + AC:2011
- DIN EN ISO 19118:2012 Geographic information - Encoding (ISO 19118:2011); English version EN ISO 19118:2011
- DIN EN ISO 2702:2011-08 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011); German version EN ISO 2702:2011
- DIN EN 62246-1:2011-12 Reed switches - Part 1: Generic specification (IEC 62246-1:2011); German version EN 62246-1:2011
- DIN EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011); German version EN ISO 14579:2011
- DIN EN ISO 28399:2011 Dentistry - Products for external tooth bleaching (ISO 28399:2011); German version EN ISO 28399:2011
- DIN EN 61199:2013-09 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011 + A1:2012); German version EN 61199:2011 + A1:2013
- DIN EN 60475:2012 Method of sampling insulating liquids (IEC 60475:2011); German version EN 60475:2011
- DIN EN 61347-2-3:2017-10 Lamp control gear - Part 2-3: Particular requirements for ac and/or dc supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011+ Cor.:2011 + A1:2016); German version EN 61347-2-3:2011 + AC:2011 + A1:2017
- DIN EN 60086-3:2011-12 Primary batteries - Part 3: Watch batteries (IEC 60086-3:2011); German version EN 60086-3:2011
- DIN EN 60505:2017-06*VDE 0302-1 Berichtigung 1:2017-06 (IEC 60505:2011/COR1:2017); German version EN 60505:2011/AC:2017-03
- DIN EN 62532:2011-10 Fluorescent induction lamps - Safety specifications (IEC 62532:2011); German version EN 62532:2011
- DIN EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011); German version EN ISO 1519:2011
- DIN EN 62532:2017-10 Fluorescent induction lamps - Safety specifications (IEC 62532:2011 + A1:2016); German version EN 62532:2011 + A1:2017
- DIN EN ISO 9092:2012 Textiles - Nonwovens - Definition (ISO 9092:2011); German version EN ISO 9092:2011
- DIN EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011); German version EN ISO 1479:2011
- DIN EN 60475:2012-07 Method of sampling insulating liquids (IEC 60475:2011); German version EN 60475:2011
- DIN EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011); German version EN ISO 3405:2011
- DIN EN ISO 8624:2011 Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2011); German version EN ISO 8624:2011
- DIN EN ISO 25239-1:2012-03 Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2011); Trilingual version EN ISO 25239-1:2011
- DIN EN 61184 Corrigendum 1:2013-08 Bayonet lampholders (IEC 61184:2008 + Cor. :2009 + A1:2011); German version EN 61184:2008 + A1:2011, Corrigendum to DIN EN 61184 (VDE 0616-2):2011-12; (IEC-Cor. 2:2013 to IEC 61184:2008 + A1:2011)
- DIN EN 62549:2012-08 Articulated systems and flexible systems for cable guiding (IEC 62549:2011); German version EN 62549:2011
- DIN EN 15440 Berichtigung 1:2012 Solid recovered fuels - Methods for the determination of biomass content; German version EN 15440:2011, Corrigendum to DIN EN 15440:2011-05; German version EN 15440:2011/AC:2011
- DIN EN 60929:2016-09 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011 + Cor.:2011 + A1:2015); German version EN 60929:2011 + AC:2011 + A1:2016
- DIN EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011); German version EN ISO 1481:2011
- DIN EN 61954:2011-12 Static VAR compensators (SVC) - Testing of thyristor valves (IEC 61954:2011); German version EN 61954:2011
- DIN EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011); German version EN ISO 7048:2011
- DIN EN ISO 6875:2011-10 Dentistry - Patient chair (ISO 6875:2011)
- DIN EN ISO 11850:2016-05 Machinery for forestry - General safety requirements (ISO 11850:2011 + Amd 1:2016); German version EN ISO 11850:2011 + A1:2016
- DIN EN ISO 7053:2011 Hexagon washer head tapping screws (ISO 7053:2011); German version EN ISO 7053:2011
- DIN EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011); German version EN ISO 2867:2011
- DIN EN 50536:2011 Protection against lightning - Thunderstorm warning systems; German version EN 50536:2011 + AC:2011
- DIN EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011); German version EN ISO 14584:2011
- DIN EN 62532:2011 Fluorescent induction lamps - Safety specifications (IEC 62532:2011); German version EN 62532:2011
- DIN EN 61167:2012-03 Metal halide lamps - Performance specification (IEC 61167:2011); German version EN 61167:2011
- DIN EN ISO 14087:2012-03 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011); German version EN ISO 14087:2011
- DIN EN 62554:2012-10 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011); German version EN 62554:2011
- DIN EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO 7049:2011); German version EN ISO 7049:2011
- DIN EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011); German version EN ISO 4016:2011
- DIN EN 60086-1:2011 Primary batteries - Part 1: General (IEC 60086-1:2011); German version EN 60086-1:2011
- DIN EN ISO 4016:2011-05 Hexagon head bolts - Product grade C (ISO 4016:2011); German version EN ISO 4016:2011
- DIN EN 61184:2011-12 Bayonet lampholders (IEC 61184:2008 + Cor. :2009 + A1:2011); German version EN 61184:2008 + A1:2011
- DIN EN ISO 10943:2011-11 Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2011); German version EN ISO 10943:2011
- DIN EN ISO 10773:2011 Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011); German version EN ISO 10773:2011
- DIN EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011); German version EN ISO 4766:2011
- DIN EN 61347-2-3:2012 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011 + Cor. :2011); German version EN 61347-2-3:2011 + AC:2011
- DIN EN 61810-2:2012-01 Electromechanical elementary relays - Part 2: Reliability (IEC 61810-2:2011); German version EN 61810-2:2011
- DIN EN 60086-2:2012-01 Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011); German version EN 60086-2:2011
- DIN EN 60505:2012-05 Evaluation and qualification of electrical insulation systems (IEC 60505:2011); German version EN 60505:2011
- DIN EN ISO 19011 Berichtigung 1:2013 Guidelines for auditing management systems (ISO 19011:2011); German and English version EN ISO 19011:2011, Corrigendum to DIN EN ISO 19011:2011-12
- DIN EN 60974-13:2012-03 Arc welding equipment - Part 13: Welding clamp (IEC 60974-13:2011); German version EN 60974-13:2011
- DIN EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011); German version EN ISO 2009:2011
- DIN EN ISO 4018:2011-06 Hexagon head screws - Product grade C (ISO 4018:2011); German version EN ISO 4018:2011
- DIN EN 60238:2011-10 Edison screw lampholders (IEC 60238:2004 + A1:2008 + A2:2011); German version EN 60238:2004 + Cor. :2005 + A1:2008 + A2:2011
- DIN EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011); German version EN ISO 1482:2011
- DIN EN 16147 Berichtigung 1:2012 Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units; German version EN 16147:2011, Corrigendum to DIN EN 16147:2011-04, German version EN 16147:2011/AC:2011
- DIN EN ISO 13132:2011 Laboratory glassware - Petri dishes (ISO 13132:2011); German version EN ISO 13132:2011
- DIN EN ISO 10748:2011 Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011); German version EN ISO 10748:2011
- DIN EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011); German and English version EN ISO 19011:2011
- DIN EN ISO 5912:2013-08 Camping tents (ISO 5912:2011)
- DIN EN ISO 20877:2011 Footwear - Test methods for whole shoe - Thermal insulation (ISO 20877:2011); German version EN ISO 20877:2011
- DIN EN ISO 10943:2011 Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2011); German version EN ISO 10943:2011
- DIN EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011); German version EN ISO 14583:2011
- DIN EN ISO 19131:2012-01 Geographic information - Data product specifications (ISO 19131:2007 + Amd 1:2011); English version EN ISO 19131:2008 + A1:2011
- DIN EN ISO 5359:2012-04 Low-pressure hose assemblies for use with medical gases (ISO 5359:2008 + Amd 1:2011) (includes Amendment A1:2011)
- DIN EN ISO 11073-20601 2011-07 150-204 DIN EN ISO 11073-20601:2011 (E)
- DIN EN ISO 5912:2012-01 Camping tents (ISO 5912:2011)
- DIN EN ISO 5360 E:2011-07 Draft Document - Anaesthetic vaporizers - Agent-specific filling systems (ISO/FDIS 5360:2011); German version FprEN ISO 5360:2011
- DIN EN 61184:2011 Bayonet lampholders (IEC 61184:2008 + Cor. :2009 + A1:2011); German version EN 61184:2008 + A1:2011
- DIN EN ISO 50001:2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011); German version EN ISO 50001:2011
- DIN EN ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011); German version EN ISO 7050:2011
- DIN EN 60076-1:2012-03 Power Transformers - Part 1: General (IEC 60076-1:2011); German version EN 60076-1:2011
- DIN EN ISO 10510:2011 Tapping screw and washer assemblies with plain washers (ISO 10510:2011); German version EN ISO 10510:2011
- DIN EN ISO 17131:2011 Leather - Identification of leather with microscopy (ISO/DIS 171317:2011); German version prEN ISO 17131:2011
- DIN EN ISO 11850:2012 Machinery for forestry - General safety requirements (ISO 11850:2011); German version EN ISO 11850:2011
- DIN EN 61184 Corrigendum 1:2013 Bayonet lampholders (IEC 61184:2008 + Cor. :2009 + A1:2011); German version EN 61184:2008 + A1:2011, Corrigendum to DIN EN 61184 (VDE 0616-2):2011-12; (IEC-Cor. 2:2013 to IEC 61184:2008 + A1:2011)
- DIN EN ISO 11591:2011 Small craft, engine-driven - Field of vision from helm position (ISO 11591:2011); German version EN ISO 11591:2011
- DIN EN ISO 19011:2011-12 Guidelines for auditing management systems (ISO 19011:2011); German and English version EN ISO 19011:2011
- DIN EN ISO 1580:2011 Slotted pan head screws - Product grade A (ISO 1580:2011); German version EN ISO 1580:2011
- DIN EN ISO 6947:2011 Welding and allied processes - Welding positions (ISO 6947:2011); German version EN ISO 6947:2011
- DIN EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011); German version EN ISO 3953:2011
- DIN EN 60086-3:2011 Primary batteries - Part 3: Watch batteries (IEC 60086-3:2011); German version EN 60086-3:2011
- DIN EN 62246-1:2011 Reed switches - Part 1: Generic specification (IEC 62246-1:2011); German version EN 62246-1:2011
- DIN EN 60456:2012-03 Clothes washing machines for household use - Methods for measuring the performance (IEC 60456:2010, modified); German version EN 60456:2011 + AC:2011
- DIN EN 60118-13:2012-02 Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:2011); German version EN 60118-13:2011
- DIN EN ISO 14006:2011-10 Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011); German and English version EN ISO 14006:2011
- DIN EN 61184 Berichtigung 1:2013 Bayonet lampholders (IEC 61184:2008 + Cor. :2009 + A1:2011); German version EN 61184:2008 + A1:2011, Corrigendum to DIN EN 61184 (VDE 0616-2):2011-12; (IEC-Cor. 2:2013 to IEC 61184:2008 + A1:2011)
- DIN EN 62634:2012-09 Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2011); German version EN 62634:2011
- DIN EN 60794-1-1:2012-06 Optical fibre cables - Part 1-1: Generic specification - General (IEC 60794-1-1:2011); German version EN 60794-1-1:2011
- DIN EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011); German version EN ISO 1207:2011
- DIN EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011); German version EN ISO 4014:2011
- DIN EN 60061-3:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A43:2011 + A44:2011, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997
- DIN EN 60086-5:2012-01 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (IEC 60086-5:2011); German version EN 60086-5:2011
- DIN EN ISO 11960:2011 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2011); English version EN ISO 11960:2011, only on CD-ROM
- DIN EN ISO 12625-1:2011-11 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011); Trilingual version EN ISO 12625-1:2011
- DIN EN ISO 14155:2012-01 Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011 + Cor. 1:2011)
- DIN EN 62549:2012 Articulated systems and flexible systems for cable guiding (IEC 62549:2011); German version EN 62549:2011
- DIN EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011); German version EN ISO 2010:2011
- DIN EN 60086-1:2011-12 Primary batteries - Part 1: General (IEC 60086-1:2011); German version EN 60086-1:2011
- DIN EN 62541-6:2012 OPC unified architecture - Part 6: Mappings (IEC 62541-6:2011); English version EN 62541-6:2011
- DIN EN ISO 80601-2-12:2012 Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO/IEC 80601-2-12:2011 + Cor. :2011); German version EN ISO 80601-2-12:2011 + AC:2011
- DIN EN 60400:2011 Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2008 + A1:2011); German version EN 60400:2008 + A1:2011
- DIN EN 61199:2013 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011 + A1:2012); German version EN 61199:2011 + A1:2013
- DIN EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011); German version EN ISO 14580:2011
- DIN EN 61534-1:2012-03 Powertrack systems - Part 1: General requirements (IEC 61534-1:2011); German version EN 61534-1:2011
- DIN EN ISO 13130:2011 Laboratory glassware - Desiccators (ISO 13130:2011); German version EN ISO 13130:2011
- DIN EN ISO 12137:2012 Paints and varnishes - Determination of mar resistance (ISO 12137:2011); German version EN ISO 12137:2011
- DIN EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011); German version EN ISO 4018:2011
- DIN EN ISO 4014:2011-05 Hexagon head bolts - Product grades A and B (ISO 4014:2011); German version EN ISO 4014:2011
- DIN EN 60076-2:2012-02 Power transformers - Part 2: Temperature rise for liquid-immersed transformers (IEC 60076-2:2011); German version EN 60076-2:2011
- DIN EN ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011); German version EN ISO 1483:2011
- DIN EN 62541-4:2012-06 OPC unified architecture - Part 4: Services (IEC 62541-4:2011); English version EN 62541-4:2011
- DIN EN ISO 15546:2011 Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011); English version EN ISO 15546:2011
- DIN EN ISO 80601-2-12:2012-02 Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO/IEC 80601-2-12:2011 + Cor. :2011); German version EN ISO 80601-2-12:2011 + AC:2011
- DIN EN ISO 7051:2011 Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011); German version EN ISO 7051:2011
- DIN EN 55017:2012-04 Methods of measurement of the suppression characteristics of passive EMC filtering devices (CISPR 17:2011); German version EN 55017:2011
- DIN EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011); German version EN ISO 3035:2011
- DIN EN ISO 20344:2013 Personal protective equipment - Test methods for footwear (ISO 20344:2011); German version EN ISO 20344:2011
- DIN EN 62343-2:2011 Dynamic modules - Part 2: Reliability qualification (IEC 62343-2:2011); German version EN 62343-2:2011
- DIN EN 61534-1:2015-03 Powertrack systems - Part 1: General requirements (IEC 61534-1:2011 + A1:2014); German version EN 61534-1:2011 + A1:2014
- DIN EN 60974-13:2012 Arc welding equipment - Part 13: Welding clamp (IEC 60974-13:2011); German version EN 60974-13:2011
- DIN EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011); German version EN ISO 2702:2011
- DIN EN ISO 4017:2011 Hexagon head screws - Product grades A and B (ISO 4017:2011); German version EN ISO 4017:2011
- DIN EN ISO 14587:2011 Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011); German version EN ISO 14587:2011
- DIN EN 62541-5:2012-06 OPC unified architecture - Part 5: Information model (IEC 62541-5:2011); English version EN 62541-5:2011
- DIN EN 62541-4:2012 OPC unified architecture - Part 4: Services (IEC 62541-4:2011); English version EN 62541-4:2011
- DIN EN ISO 12863:2011-04 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010 + Cor. 1:2011) (includes Corrigendum AC:2011)
- DIN EN 61378-1:2012-05 Convertor transformers - Part 1: Transformers for industrial applications (IEC 61378-1:2011); German version EN 61378-1:2011
- DIN EN 60974-5 E:2012-08 Draft Document - Arc welding equipment - Part 5: Wire feeders (IEC 26/468/CDV:2011); German version FprEN 60974-5:2011
- DIN EN ISO 13212:2011 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO 13212:2011); German version EN ISO 13212:2011
- DIN EN 62281 E:2012-07 Draft Document - Safety of primary and secondary lithium cells and batteries during transport (IEC 35/1296/CDV:2011); German version FprEN 62281:2011
- DIN EN ISO 7380-1:2011-11 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011); German version EN ISO 7380-1:2011
- DIN ISO /TR 28642:2013 Dentistry - Guidance on colour measurement (ISO/TR 28642:2011)
- DIN EN ISO 9092:2012-01 Textiles - Nonwovens - Definition (ISO 9092:2011)
- DIN EN 61812-1:2012-03 Time relays for industrial and residential use - Part 1: Requirements and tests (IEC 61812-1:2011); German version EN 61812-1:2011
- DIN EN 50174-2:2015-02 Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings; German version EN 50174-2:2009 + A1:2011 + A1:2011/AC:2011 + A2:2014
- DIN EN ISO 11646 E:2012 Draft Document - Leather - Measurement of area (ISO/DIS 11646:2011); German version prEN ISO 11646:2011
- DIN EN 62253:2012-05 Photovoltaic pumping systems - Design qualification and performance measurements (IEC 62253:2011); German version EN 62253:2011
- DIN EN 62541-8:2012-06 OPC unified architecture - Part 8: Data Access (IEC 62541-8:2011); English version EN 62541-8:2011
- DIN EN 60400:2011-12 Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2008 + A1:2011); German version EN 60400:2008 + A1:2011
- DIN EN ISO 24503:2011 Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO 24503:2011); German version EN ISO 24503:2011
- DIN EN ISO 12677:2012 Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011); German version EN ISO 12677:2011
- DIN EN ISO 13287 E:2011-04 Draft Document - Personal protective equipment - Footwear - Test method for slip resistance (ISO/DIS 13287:2011); German version prEN ISO 13287:2011
- DIN EN 60086-2:2012 Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011); German version EN 60086-2:2011
- DIN EN 62253:2012 Photovoltaic pumping systems - Design qualification and performance measurements (IEC 62253:2011); German version EN 62253:2011
- DIN EN 62343-2:2011-12 Dynamic modules - Part 2: Reliability qualification (IEC 62343-2:2011); German version EN 62343-2:2011
- DIN EN 62541-5:2012 OPC unified architecture - Part 5: Information model (IEC 62541-5:2011); English version EN 62541-5:2011
- DIN EN ISO 20126 E:2011-01 Draft Document - Dentistry - Manual toothbrushes - General requirements and test methods (ISO/DIS 20126.2:2011); German version prEN ISO 20126:2011
- DIN EN ISO 14825:2011-10 Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011); English version EN ISO 14825:2011, only on CD-ROM
- DIN EN ISO 10271:2011 Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011); German version EN ISO 10271:2011
- DIN EN 1992-3-NA 2011-01(2) German National Annex to DIN EN 1992-3:2011-01
- DIN EN 1996-1-2 2011-04(2) Eurocode 6: Design of masonry structures — Part 1-2: General rules — Structural fire design
- DIN EN 62571:2011 Digital audiobook file format and player requirements (IEC 62571:2011); German version EN 62571:2011
- DIN EN ISO 9999:2011 Assistive products for persons with disability - Classification and terminology (ISO 9999:2011); German version EN ISO 9999:2011
- DIN EN ISO 8565:2011 Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011); German version EN ISO 8565:2011
- DIN EN ISO 10323:2011 Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO/DIS 10323:2011); German version prEN ISO 10323:2011
- DIN EN ISO 19980 E:2011-01 Draft Document - Ophthalmic instruments - Corneal topographers (ISO/DIS 19980:2011); German version prEN ISO 19980:2011
- DIN EN ISO 14087:2012-02 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011); German version EN ISO 14087:2011
- DIN EN 61121/AA E:2011-07 Draft Document - Tumble dryers for household use - Methods for measuring the performance; German version FprEN 61121:2011/FprAA:2011
- DIN EN 61199:2015-09 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011 + A1:2012 + A2:2014); German version EN 61199:2011 + A1:2013 + A2:2015
- DIN EN ISO 13686 E:2011 Draft Document - Natural gas - Quality designation (ISO/DIS 13686:2011); German version prEN ISO 13686:2011
- DIN EN ISO 26800:2011 Ergonomics - General approach, principles and concepts (ISO 26800:2011); German version EN ISO 26800:2011
- DIN EN 61810-2:2012 Electromechanical elementary relays - Part 2: Reliability (IEC 61810-2:2011); German version EN 61810-2:2011
- DIN EN ISO 7439 E:2011-04 Draft Document - Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO/FDIS 7439:2011); German version FprEN ISO:2011
- DIN EN ISO 21090:2011 Health Informatics - Harmonized data types for information interchange (ISO 21090:2011); English version EN ISO 21090:2011, only on CD-ROM
- DIN EN ISO 14087:2012 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011); German version EN ISO 14087:2011
- DIN EN ISO 7439:2011 Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2011); German version EN ISO 7439:2011
- DIN EN 60929:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011 + Cor.:2011 + A1:2015); German version EN 60929:2011 + AC:2011 + A1:2016
- DIN EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011); German version EN 62554:2011
- DIN EN 60684-2:2012-05 Flexible insulating sleeving - Part 2: Methods of test (IEC 60684-2:2011); German version EN 60684-2:2011
- DIN EN ISO 10943 E:2011-06 Draft Document - Ophthalmic instruments - Indirect ophthalmoscopes (ISO/FDIS 10943:2011); German version FprEN ISO 10943:2011
- DIN EN ISO 17131 E:2011-05 Draft Document - Leather - Identification of leather with microscopy (ISO/DIS 171317:2011); German version prEN ISO 17131:2011
- DIN EN ISO 772:2011 Hydrometry - Vocabulary and symbols (ISO 772:2011); Trilingual version EN ISO 772:2011
- DIN EN 62541-8:2012 OPC unified architecture - Part 8: Data Access (IEC 62541-8:2011); English version EN 62541-8:2011
- DIN EN ISO 13688 E:2011 Draft Document - Protective clothing - General requirements (ISO/DIS 13688:2011); German version prEN ISO 13688:2011
- DIN EN 62305-4:2017-02*VDE 0185-305-4 Berichtigung 1:2017-02 Corrigendum to DIN EN 62305-4 (VDE 0185-305-4):2011-10; German version EN 62305-4:2011/AC:2016
- DIN EN 62109-1:2011-08*VDE 0126-14-1 Berichtigung 1:2011-08 Corrigendum to DIN EN 62109-1 (VDE 0126-14-1):2011-04
- DIN EN ISO 25378:2011 Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011); German version EN ISO 25378:2011
- DIN EN ISO 11372:2012 Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011); German version EN ISO 11372:2011
- DIN EN 1991-2 NA:2010 DIN EN 1991-2/NA:2011-07 National Annex to the Eurocode 1 - Actions on Structures Part 2: Traffic Loads on Bridges for Germany
- DIN IEC 65700-19-03 E:2012-01 Draft Document - Bushings for DC application (IEC 36A/151/CD:2011)
- DIN EN 62305-1:2012-03*VDE 0185-305-1 Berichtigung 1:2012-03 Corrigendum to DIN EN 62305-1 (VDE 0185-305-1):2011-10
- DIN EN ISO 15189:2011 Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2011); German version prEN ISO 15189:2011
- DIN EN ISO 19131:2012 Geographic information - Data product specifications (ISO 19131:2007 + Amd 1:2011); English version EN ISO 19131:2008 + A1:2011
- DIN EN 61199:2015 Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011 + A1:2012 + A2:2014); German version EN 61199:2011 + A1:2013 + A2:2015
- DIN EN 61549/A3 E:2011 Draft Document - Miscellaneous lamps (IEC 34A/1486A/CDV:2011); German version EN 61549:2003/FprA3:2011
- DIN EN 61534-1:2022-04 Powertrack systems - Part 1: General requirements (IEC 61534-1:2011 + A1:2014 + A2:2020); German version EN 61534-1:2011 + A1:2014 + A2:2021 + A11:2021
- DIN EN 60851-5:2020 Winding wires - Test methods - Part 5: Electrical properties (IEC 60851-5:2008 + A1:2011 + A2:2019); German version EN 60851-5:2008 + A1:2011 + A2:2019
- DIN EN 61439-1:2012-06 Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2011); German version EN 61439-1:2011
- DIN CEN ISO/TS 17575-4:2011-10 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011); English version CEN ISO/TS 17575-4:2011
- DIN EN ISO 9908/A1:2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011); German version EN ISO 9908:1997/A1:2011
- DIN EN 61549/A3 E:2011-08 Draft Document - Miscellaneous lamps (IEC 34A/1486A/CDV:2011); German version EN 61549:2003/FprA3:2011
- DIN EN 15595 Berichtigung 1:2013 Railway applications - Braking - Wheel slide protection; German version EN 15595:2009+A1:2011, Corrigendum to DIN EN 15595:2011-07
- DIN EN 50122-1 Berichtigung 1:2014 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock; German version EN 50122-1:2011 + A1:2011, Corrigendum to DIN EN 50122-1 (VDE 0115-3):2011-09; German ve
- DIN EN ISO 25239-2:2012 Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2011); German version EN ISO 25239-2:2011
- DIN EN ISO 13287:2011 Personal protective equipment - Footwear - Test method for slip resistance (ISO/DIS 13287:2011); German version prEN ISO 13287:2011
- DIN EN 60400:2015 Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2008 + A1:2011 + A2:2014); German version EN 60400:2008 + A1:2011 + A2:2014
- DIN EN ISO 15189 E:2011-02 Draft Document - Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2011); German version prEN ISO 15189:2011
- DIN EN 62459 Berichtigung 1:2016 Sound system equipment - Electroacoustic transducers - Measurement of suspension parts (IEC 62459:2010); German version EN 62459:2011, Corrigendum to DIN EN 62459:2011-07; German version EN 62459:2011/AC:2015
- DIN EN 15221-8:2023-09 Facility Management - Part 8: Principles and processes; German and English version prEN 15221-8:2023 / Note: Date of issue 2023-08-18*Intended as replacement for DIN EN 15221-3 (2011-12), DIN EN 15221-4 (2011-12), DIN EN 15221-5 (2011-12), DIN EN 15221...
- DIN EN 62148-3 Berichtigung 1:2013 Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers (IEC 62148-3:2010); German version EN 62148-3:2011, Corrigendum to DIN EN 62148-3:2011-06; German version CENELEC-Cor. :2011 to EN 62148-3:2011
- DIN EN ISO 8765:2011-05 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011); German version EN ISO 8765:2011
- DIN EN ISO 14906:2012-03 Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011); English version EN ISO 14906:2011
- DIN EN ISO 14051:2011 Environmental management - Material flow cost accounting - General framework (ISO 14051:2011); German and English version EN ISO 14051:2011
- DIN EN 62271-1/A1:2012-04 High-voltage switchgear and controlgear - Part 1: Common specifications (IEC 62271-1:2007/A1:2011); German version EN 62271-1:2008/A1:2011
- DIN EN ISO 13212 E:2011-02 Draft Document - Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO/FDIS 13212:2011); German version FprEN ISO 13212:2011
- DIN EN ISO 19157 E:2011 Draft Document - Geographic information - Data quality (ISO/DIS 19157:2011); English version prEN ISO 19157:2011
- DIN EN 60567:2012-08 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance (IEC 60567:2011); German version EN 60567:2011
- DIN EN 55017:2012 Methods of measurement of the suppression characteristics of passive EMC filtering devices (CISPR 17:2011); German version EN 55017:2011
- DIN EN ISO 21671:2011 Dentistry - Rotary polishers (ISO 21671:2006 + Amd. 1:2011); German version EN ISO 21671:2006 + A1:2011
- DIN EN 31:2011 Wash basins - Connecting dimensions; German version EN 31:2011
- DIN EN 62496-3:2011 Optical circuit boards - Part 3: Performance standards - General and guidance (IEC 62496-3:2011); German version EN 62496-3:2011
- DIN EN ISO 15753:2011 Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2006 + Amd.1:2011); German version EN ISO 15753:2006 + A1:2011
- DIN EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011); German version EN ISO 7380-1:2011
- DIN EN ISO 8536-1:2011 Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011); German version EN ISO 8536-1:2011
- DIN EN ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011); German version EN ISO 7045:2011
- DIN EN 60086-5:2012 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (IEC 60086-5:2011); German version EN 60086-5:2011
Indonesia Standards
- SNI 0225-2011 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011)
- SNI 0225 AMD 4-2015 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) - Amandemen 4
- SNI 0225 AMD 2-2014 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) - Amandemen 2
- SNI 0225 AMD 3-2014 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) - Amandemen 3
- SNI ISO 3972:2011 Analisis sensori - Metodologi - Metode menyelidiki sensitivitas rasa (ISO 3972:2011, IDT, Eng; ISO 3972:2011/Cor 1:2012, IDT, Eng)
- SNI ISO 19118:2011 Geographic Information – Encoding (ISO 19118:2011, IDT)
Australian/New Zealand Standard (AU-AS/NZS)
- AS/NZS 4836:2011+A1
- AS/NZS 1170.2:2011(R2016)+A5
- AS/NZS 1418.10:2011+A1
- AS/NZS 61184:2015 Amd 1:2015 Bayonet lampholders (IEC 61184, Ed. 3.1 (2011) MOD)
- AS/NZS 61184:2015 Bayonet lamp holder (IEC 61184 Ed. 3.1 (2011) MOD)
- AS/NZS 60238:2015 Edison screw lamp holder (IEC 60238 Ed. 8.2 (2011) MOD)
- AS/NZS 61184:2015 Amd 2:2017 Bayonet lampholders (IEC 61184, Ed. 3.1 (2011) MOD)
- AS/NZS 60238:2015 Amd 2:2017 Edison screw lampholders (IEC 60238, Ed. 8.2 (2011) MOD)
- AS/NZS 60076.1:2014 Overview of power transformers (IEC 60076-1 Ed. 3.0 (2011) MOD)
Canadian Standards Association (CSA)
- CAN/CSA Z434-2014(R2019) Industrial robots and robot systems (Adopted ISO 10218-1:2011, second edition, 2011-07-01, with Canadian deviations and ISO 10218-2:2011, first edition, 2011-07-01, with Canadian deviations)
- CSA C411.1-2010(R2014) AC Suspension Insulators, Includes Update No. 1 (2010), Update No. 2 (2011), Update No. 3 (2011)
- CAN/CSA-ISO/IEC 40240-2018(R2022) Information Technology - W3C Web Services Addressing 1.0 - Core (Adopted ISO/IEC 40240:2011, first edition, 2011-09-11)
- CAN/CSA-ISO/TR 13121-2013(R2021) Nanotechnologies - Nanomaterial risk evaulation (Adopted ISO/TR 13121:2011, first edition, 2011-05-15)
- CAN/CSA-ISO 19011-2012(R2017) Guidelines for Quality and/or Environmental Management Systems Auditing (Adopted ISO 19011:2011, second edition, 2011-15-15)
- CAN/CSA ISO/IEC 40250-2018(R2022) Information technology - W3C Web Services Addressing 1.0 - SOAP Binding (Adopted ISO/IEC 40250:2011, first edition, 2011-09-01)
- CAN/CSA-ISO/IEC 40250-2018(R2022) Information Technology - W3C Web Services Addressing 1.0 - SOAP Binding (Adopted ISO/IEC 40250:2011, first edition, 2011-09-01)
- CAN/CSA C62301-2011(R2021) Household electrical appliances - Measurement of standby power (Adopted CEI/IEC 62301:2011, second edition, 2011-01, with Canadian deviations)
- CAN/CSA-ISO/IEC 40220-2018(R2022) Information Technology - W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition) (Adopted ISO/IEC 40220:2011, first edition, 2011-09-01)
- CAN/CSA 50001-2011(R2016) Energy management systems - Requirements with guidance for use (Adopted ISO 50001:2011, first edition, 2011-06-15)
- CSA C22.3 No.7-2010(R2015) Underground systems, Includes Update No. 1 (2011)
- CAN/CSA-ISO/IEC 18031-2013(R2022) Information technology - Security techniques - Random git generation (Adopted ISO/IEC 18031:2011, second edition, 2011-11-15)
- CSA C411.1-2010 Suspension Insulators (Chain Elements) (Second Edition; Update No. 2: February 2011; Update No. 3: March 2011)
- CAN/CSA-ISO/IEC 40270-2018(R2022) Information Technology - W3C Web Services Policy 1.5 - Framework (Adopted ISO/IEC 40270:2011, first edition, 2011-09-01)
- CAN/CSA-ISO/IEC 40230-2018(R2022) Information Technology - W3C SOAP Message Transmission Optimization Mechanism (Adopted ISO/IEC 40230:2011, first edition, 2011-09-11)
- CAN/CSA-ISO/IEC TS 27008-2020 Information technology - Security techniques - Guidelines for auditors on information security controls (Adopted ISO/IEC TR 27008:2011, first edition, 2011-10-15)
- CAN/CSA-ISO/IEC 40260-2018(R2022) Information Technology - W3C Web Services Addressing 1.0 - Metadata (Adopted ISO/IEC 40260:2011, first edition, 2011-09-01)
- CAN/CSA-ISO/IEC 40280-2018(R2022) Information Technology - W3C Web Services Policy 1.5 - Attachment (Adopted ISO/IEC 40280:2011, first edition, 2011-09-01)
- CAN/CSA-ISO/IEC 40210-2018(R2022) Information Technology - W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition) (Adopted ISO/IEC 40210:2011, first edition, 2011-09-01)
- CAN/CSA Z23500-2012 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies (Adopted ISO 23500:2011, first edition, 2011-05-15)
- CAN/CSA-ISO/IEC 11770-5-2020 Information technology - Security techniques - Key management - Part 5: Group key management (Adopted ISO/IEC 11770-5:2011, first edition, 2011-12-15)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
- ASHRAE APP SI-2011 2011 HVAC Applications (SI Edition)
- ASHRAE HVAC APPLICATION SI HDBK-2011 2011 ASHRAE HANDBOOK HVAC Applications SI Edition
- ASHRAE TRAN 2011-2-2011 2011 ASHRAE TRANSACTIONS VOLUME 117@ PART 2
- ASHRAE HVAC APPLICATIONS IP HANDBOOK-2011 2011 ASHRAE HANDBOOK HVAC Applications I-P Edition
- ASHRAE HVAC APPLICATIONS SI HANDBOOK-2011 2011 ASHRAE HANDBOOK HVAC Applications SI Edition
- ASHRAE TRAN 2011-1-2011 2011 ASHRAE TRANSACTIONS VOLUME 117 PART 1
Underwriters Laboratories (UL)
- UL 2730-2011 Subject 2730
- UL 2729-2011 Subject 2729
- UL Subject 294A-2011 Subject 294A (Bulletin, 5/6/2011)
- UL Subject 294C-2011 Subject 294C (Bulletin, 5/6/2011)
- UL Subject 2729-2011 Subject 2729 (CSDS Proposal, 10/14/2011)
- UL Subject 2730-2011 Subject 2730 (CSDS Proposal, 3/25/2011)
- UL Subject 6180-2011 Subject 6180 (CSDS Proposal, 9/2/2011)
- UL Subject 6268-2011 Subject 6268 (CSDS Proposal, 9/23/2011)
Der Energieeffizienzverband für Wärme, Kälte und KWK e. V.(AGFW)
- AGFW FW 431 A:2011-06 Qualified personnel for determined electro technical tasks during district heating operations - task and qualification profile
National Association of Corrosion Engineers (NACE)
Standards Norway
- NS-EN ISO 5912:2011 Camping tents (ISO 5912:2011)
- NS-EN ISO 6875:2011 Dentistry — Patient chair (ISO 6875:2011)
- NS-EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
- NS-EN ISO 15112:2014 Natural gas — Energy determination (ISO 15112:2011)
- NS-EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011)
- NS-EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)
- NS-EN ISO 2867:2011 Earth-moving machinery — Access systems (ISO 2867:2011)
- NS-EN ISO 10943:2011 Ophthalmic instruments — Indirect ophthalmoscopes (ISO 10943:2011)
- NS-EN ISO 19118:2011 Geographic information — Encoding (ISO 19118:2011)
- NS-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
- NS-EN ISO 7053:2011 Hexagon washer head tapping screws (ISO 7053:2011)
- NS-EN ISO 9092:2011 Textiles — Nonwovens — Definition (ISO 9092:2011)
- NS-EN ISO 772:2011 Hydrometry — Vocabulary and symbols (ISO 772:2011)
- NS-EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011)
- NS-EN ISO 4018:2011 Hexagon head screws — Product grade C (ISO 4018:2011)
- NS-EN ISO 3953:2011 Metallic powders — Determination of tap density (ISO 3953:2011)
American Bureau of Shipping
- ABS 2 PART 1 NOTICE 3-2011 RULES FOR CONDITIONS OF CLASSIFICATION 2011
- ABS 2 PART 7 CORR-2011 RULES FOR SURVEY AFTER CONSTRUCTION 2011
- ABS 2 PART 1 NOTICE 2-2011 RULES FOR CONDITIONS OF CLASSIFICATION 2011
- ABS 2 PART 1 CORR-2011 RULES FOR CONDITIONS OF CLASSIFICATION 2011
- ABS 2 PART 1-2011 RULES FOR CONDITIONS OF CLASSIFICATION 2011 PART 1
- ABS 2 PART 7 NOTICE 1-2011 RULES FOR SURVEY AFTER CONSTRUCTION 2011
- ABS 2 PART 2 CORR-2011 RULES FOR MATERIALS AND WELDING 2011
- ABS 2 PART 2 NOTICE 1-2011 RULES FOR MATERIALS AND WELDING 2011
- ABS 2 PART 2-2011 RULES FOR MATERIALS AND WELDING 2011 PART 2
International Sate Transit Association
- ISTA 3H-2011(2014) ISTA 3H 2011
Vertrauen durch Sicherheit
- VDS 2491 Directory, as of October 2011
European Association for Standardizing Information and Communication Systems (ECMA)
- MEMENTO-2011 ECMA Memento 2011
- ECMA MEMENTO-2011 ECMA Memento 2011
National Fire Protection Association (NFPA)
- NFPA 409-2010 Standard on Aircraft Hangars, 2011 Edition
- NFPA 214-2010 Standard on Water-Cooling Towers, 2011 Edition
- NFPA 418-2025 Standard for Heliports, 2011 Edition
- NFPA 2-2025 Hydrogen Technologies Code, 2011 Edition
- NFPA 86-2010 Standard for Ovens and Furnaces, 2011 Edition
- NFPA 1-2012 Fire Code Effective Date: 06/20/2011
- NFPA 35-2025 Standard for the Manufacture of Organic Coatings, 2011 Edition
- NFPA 1192-2025 Standard on Recreational Vehicles, 2011 Edition
- NFPA 32-2025 Standard for Drycleaning Plants, 2011 Edition
- NFPA 18-2010 Standard on Wetting Agents, 2011 Edition
- NFPA 303-2010 Fire Protection Standard for Marinas and Boatyards, 2011 Edition
- NFPA 70 AMD 2-2011 National Electrical Code Effective Date: 11/08/2011
- NFPA 232-2012 Standard for the Protection of Records (Effective Date: 8/31/2011)
- NFPA 86 AMD 4-2011 Standard for Ovens and Furnaces Effective Date: 3/21/2011
- NFPA 32-2011 Standard for Drycleaning Plants (Effective Date: 1/3/2011)
- NFPA 101-2012 Life Safety Code Effective Date: 8/31/2011
- NFPA 1192-2011 Standard on Recreational Vehicles Effective Date: 1/3/2011
- NFPA 12-2010 Standard on Carbon Dioxide Extinguishing Systems, 2011 Edition
- NFPA 70 AMD 4-2011 National Electrical Code Effective Date: 11/08/2011
- NFPA 484-2012 Standard for Combustible Metals Effective Date: 08/31/2011
- NFPA 70-2010 National Electrical Code (NEC), 2011 Edition
- NFPA 58-2010 Liquefied Petroleum Gas Code, 2011 Edition
- NFPA 54-2012 National Fuel Gas Code Effective Date: 8/31/2011
- NFPA 45-2010 Standard on Fire Protection for Laboratories Using Chemicals, 2011 Edition
- NFPA 1984-2025 Standard on Respirators for Wildland Fire Fighting Operations, 2011 Edition
- NFPA 33-2010 Standard for Spray Application Using Flammable or Combustible Materials, 2011 Edition
- NFPA 85-2010 Boiler and Combustion Systems Hazards Code, 2011 Edition
Association Francaise de Normalisation
- NF EN 620/A1:2011 NF EN 620 A1 February 2011
- NF C17-102 F9:2014 Interpretation sheet F9 of standard NF C17-102 of September 2011
- NF C17-102 F10:2014 Interpretation sheet F10 of standard NF C17-102 of September 2011
European Union/Commission
- 2012/464/EU-2012 COMMISSION DECISION amending Decisions 2006/861/EC@ 2008/163/EC@ 2008/164/EC@ 2008/217/EC@ 2008/231/EC@ 2008/232/EC@ 2008/284/EC@ 2011/229/EU@ 2011/274/EU@ 2011/275/EU@ 2011/291/EU and 2011/314/EU concerning technical specifications for interoperability (
Czech Standards Institute (UNMZ)
- CSN 67 3361-1959 Dry Oil Basic Colors 2011
American National Standards Institute (ANSI)
- ANSI/ATIS 0100523-2011 Telecom Glossary 2011
American Association of Textile Chemists and Colorists
- AATCC TM76-2011 Electrical Resistivity of Fabrics (Reaffirmed - 2011)
- AATCC 162-2011 Colorfastness to Water: Chlorinated Pool (Revised 2011)
- AATCC 84-2011 Electrical Resistance of Yarns (Reaffirmed - 2011)
Society of Automotive Engineers (SAE)
- SAE J1939/71_199408 Vehicle Application Layer (Through May 2011)
- SAE J1939/71_201205 Vehicle Application Layer (Through May 2011)
- SAE AMS7171A-2011 Insulation Blanket, Thermal-Acoustical (Stabilized: Sep 2011)
Institute of Electrical and Electronics Engineers (IEEE)
- NFPA (Fire) 11NECCL Electrical Inspection Manual, 2011 Edition
- NFPA (Fire) NFC11ST National Fire Codes Softbound Set, 2011 Edition
- NFPA (Fire) 780HB11 Standard for the Installation of Lightning Protection Systems Handbook, 2011 Edition
- NFPA (Fire) NECTAB11 2011 National Electrical Code Tabs
Swedish Institute for Standards
- SS-EN ISO 19118:2011 Geographic information - Encoding (ISO 19118:2011)
- SS-ISO 2238:2011 Machine bridge reamers (ISO 2238:2011, IDT)
- SS-EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
- SS-EN ISO 5912:2011 Camping tents (ISO 5912:2011)
- SS-EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
- SS-EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011)
- SS-EN ISO 12679:2015 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
- SS-EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO 7049:2011)
- SS-EN ISO 10510:2011 Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
- SS-EN ISO 7887:2012 Water quality - Examination and determination of colour (ISO 7887:2011)
- SS-EN ISO 28399:2011 Dentistry - Products for external tooth bleaching (ISO 28399:2011)
- SS-EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
- SS-EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
- SS-EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
- SS-EN ISO 15112:2014 Natural gas - Energy determination (ISO 15112:2011)
American Petroleum Institute (API)
- API SPEC 6A-2010 Specification for Wellhead and Christmas Tree Equipment (TWENTIETH EDITION; Effective April 1@ 2011; Incorporating ERTA 1: January 2011; ADDENDUM 1: November 2011; ERTA 2: November 2011; ADDENDUM 2: November 2012; ADDENDUM 3: March 2013; ERTA 3: June 2013
Spanish Association for Standardization (UNE)
- UNE-EN ISO 5912:2012 Camping tents (ISO 5912:2011)
- UNE-EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
- UNE-EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
- UNE-EN ISO 2867:2012 Earth-moving machinery - Access systems (ISO 2867:2011)
- UNE-EN ISO 19011:2012 Guidelines for auditing management systems (ISO 19011:2011)
- UNE-EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011)
- UNE-EN ISO 28399:2011 Dentistry - Products for external tooth bleaching (ISO 28399:2011)
- UNE-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
- UNE-EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
- AENOR UNE-EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
- UNE-EN ISO 6875:2012 Dentistry - Patient chair (ISO 6875:2011)
- UNE-EN ISO 19156:2014 Geographic information - Observations and measurements (ISO 19156:2011)
- UNE-EN ISO 14585:2011 Hexalobular socket pan head tapping screws (ISO 14585:2011)
- UNE-EN ISO 19118:2012 Geographic information - Encoding (ISO 19118:2011)
- UNE-EN ISO 10943:2012 Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2011)
- UNE-EN ISO 772:2012 Hydrometry - Vocabulary and symbols (ISO 772:2011)
- UNE-EN ISO 20345:2012 Personal protective equipment - Safety footwear (ISO 20345:2011)
- AENOR UNE-EN ISO 20345:2012 Personal protective equipment - Safety footwear (ISO 20345:2011)
- AENOR UNE-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
- UNE-EN ISO 11850:2012 Machinery for forestry - General safety requirements (ISO 11850:2011)
- UNE-EN ISO 7887:2012 Water quality - Examination and determination of colour (ISO 7887:2011)
- AENOR UNE-EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
- UNE-EN ISO 13132:2011 Laboratory glassware - Petri dishes (ISO 13132:2011)
- AENOR UNE-EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
- AENOR UNE-EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
- AENOR UNE-EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
- UNE-EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
- UNE-EN ISO 1580:2012 Slotted pan head screws - Product grade A (ISO 1580:2011)
- AENOR UNE-EN ISO 1580:2012 Slotted pan head screws - Product grade A (ISO 1580:2011)
- UNE-EN ISO 15112:2014 Natural gas - Energy determination (ISO 15112:2011)
- UNE-EN ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
- AENOR UNE-EN ISO 14585:2011 Hexalobular socket pan head tapping screws (ISO 14585:2011)
- UNE-EN ISO 2009:2012 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
- UNE-EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
Industrial Fasteners Institute
- IMPORT EXPORT REPORT-2012 Fastener Import/Export Report - 2011
American Dental Association
- ADA 108-2009 Addendum-2011 ANSI/ADA 108-2009—Addendum: 2011
Lithuanian Standards Office
- LST EN ISO 5912:2012 Camping tents (ISO 5912:2011)
- LST EN ISO 6875:2011 Dentistry - Patient chair (ISO 6875:2011)
- LST EN 61184-2008/A1-2011 Bayonet lampholders (IEC 61184:2008/A1:2011)
- LST EN ISO 19118:2012 Geographic information - Encoding (ISO 19118:2011)
- LST EN ISO 15112:2014 Natural gas - Energy determination (ISO 15112:2011)
- LST EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
- LST EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
- LST EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
American Society of Civil Engineers (ASCE)
- ASCE GSP 224-2011 GEORISK 2011 GEOTECHNICAL RISK ASSESSMENT AND MANAGEMENT
- ASCE GSP 211-2011 GEO-FRONTIERS 2011 Advances in Geotechnical Engineering
International Maritime Organization (IMO)
- IB650E-2012 Procedures for Port State Control 2011 (Second Edition)
- I176E-2011 SOLAS AMENDMENTS 2010 and 2011
- IMO I176E-2011 SOLAS AMENDMENTS 2010 and 2011
Association of German Mechanical Engineers
- VDI 2055 Blatt 3 Ber-2012 Thermal insulation of heated and refrigerated operational installations in the industry and the building services – Technical basics for the verification of thermotechnical properties of insulation systems, determination of total heat losses
Japanese Industrial Standards Committee (JISC)
International Electrotechnical Commission (IEC)
- IECEE TRF 60601-2-45F:2023 This Test Report Form applies to: IEC 60601-2-45:2011, IEC 60601-2-45:2011/AMD1:2015, IEC 60601-2-45:2011/AMD2:2022 for use with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2020
United States Navy
- NAVY NAVSEA 5100.12 B-2011 (SER 05S/2011-183) SYSTEM SAFETY ENGINEERING POLICY
Standard Association of Australia (SAA)
- AS 5327:2019 Earth-moving machinery - Access systems (ISO 2867:2011, MOD)
- AS 3700/SUPP 1:2012 Review of Masonry Structures (Supplement 1 to AS 3700-2011)
- AS 61184:2015 Bayonet lampholders (IEC 61184, Ed. 3.1 (2011) MOD)
- AS 3700 Supp 1:2012 Masonry structures - Commentary (Supplement 1 to AS 3700 - 2011)
- AS 60238:2015 Edison screw lampholders (IEC 60238, Ed. 8.2 (2011) MOD)
Associação Brasileira de Normas Técnicas
- ABNT NBR NM 300-3-2004 Versão corrigida-2011 ABNT NBR NM 300-3-2004 Corrected version-2011
American Gas Association
- AGA RNGMS-2011 Residential Natural Gas Market Survey, 2011 Data
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC J-STD-004B CHINESE-2008 Requirements for Soldering Fluxes (Incorporated Amendment 1: 11/2011)
Air Movement and Control Association (AMCA)
- AMCA 213-12 EC-327/2011 Monitoring and Verification Programme
Standards New Zealand
- SNZ HB 3604:2011 Timber-framed buildings - Selected extracts from NZS 3604:2011
GB-REG
- REG NASA NPD 5000.2 REV C W/CHG 1-2009 Small Business Subcontracting Goals W/Change 1 (11/16/2011)
European Committee for Standardization (CEN)
- EN ISO 5264-2:2011 Pulps - Laboratory beating - Part 2: PFI mill method
- EN ISO 15112:2014 Natural gas - Energy determination