amp
amp, Total:37 items.
The international standard classification for "amp" includes: Laboratory medicine .
The Chinese standard classification for "amp" includes: Medical laboratory equipment .
Professional Standard - Medicine
- YY/T 1234-2014 Alkaline phosphatase test reagent kit(Method of NPP-AMP)
Military Standards (MIL-STD)
- MIL MIL-C-85441-1980 CABINET, ELECTRICAL EQUIPMENT C&Y-7887/U&PQ-5
- MIL MIL-E-255A-1962 ETHYL CENTRALITE &CARBAMITE& (SUPERSEDING MIL-E-255)
- MIL MIL-D-9415A-1957 DYNAMIC LOUDSPEAKER LS&184A-AIC&10 (SUPERSEDING MIL-D-9415)
- MIL MIL-PRF-19500/603D-2002 SEMI DEVICE FIELD EFFECT RAD. HARDENED (TOTAL DOSE ONLY) TRANS., N-CHANNEL, SILICON TYPES 2N7268 2N7269 2N7270 2N7394 2N7268U 2N7269U 2N7270U & 2N7394U JANTXVR F G & H & JANSR F G & H (SUPERSEDING MIL-PRF-19500/603C)
- MIL MIL-PRF-19500/703-2001 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED (TOTAL DOSE & SINGLE EVENT EFFECTS) TRANSISTOR N-CHANNEL SILICON TYPES 2N7479U3 - 2N7481U3 JANTXVR F G & H & JANSR F G & H
- MIL MIL-C-45360F-1989 CARRIERS,PERSONNEL,FULL-TRACKED:ARMORED,M113,M113A1,M113A2,M113A2/EFT&M113A3;MORTARS,SELF-PROPELLED:107MM,M106,M106A1&M106A2&81MM,M125A2&SMOKE GENERATOR:M1059;PROCESS FOR STORAGE&SHIPMENT OF (SUPERSEDING MIL-C-45360E)(S/S BY MIL-DTL...
- MIL MIL-DTL-62187C-2009 Regulator, 650 AMP, Solid State
- MIL MIL-A-45781-1962 AMPLIFIER, AUDIO FREQUENCY AM&1098/MSE&2 (FOR MISSILES) (NO S/S DOCUMENT)
- MIL MIL-R-85363-1981 ROCKET MOTOR MARK 23 MODS 2 & 3
- MIL MIL-I-27190B-1967 INDICATOR, PRESSURE AGU&3-A, HYDRAULIC, 0&4,000 PSI (SUPERSEDING MIL-I-27190A)(S/S BY MIL-C-27190C)
Society of Automotive Engineers (SAE)
- SAE AS25244B-2014 CIRCUIT BREAKER@ TRIP-FREE@ PUSH-PULL@ 5 THRU 50 AMP@ TYPE I
- SAE AS5692/3-2018 ARC Fault Circuit Breaker - Aircraft, Trip Free, 1 to 20 AMP, Type 1
- SAE AS3114-1-1949 AS3114 Channel, Earthing Point, 19 AMP
- SAE AS14153C-2016 Circuit Breaker - Aircraft@ Trip-Free@ Push-Pull 3 Phase@ 1 Thru 35 Amp@ Type 1
- SAE AS5692/4-2018 ARC Fault Circuit Breaker - Aircraft, Trip Free, 25 to 35 AMP, Type 1
- SAE AS25337-2004 CIRCUIT BREAKER@ AIRCRAFT TRIP-FREE TOGGLE@ 5-50 AMP
- SAE AS24510A-2007 Circuit Breaker – Aircraft@ Trip Free@ Push-Pull@ 5 Thru 15 AMP@ Type l (Amendment 2 - November 2004)
- SAE AS3115-1-1949 AS3115 Channel, Earthing Point, 37 AMP
- SAE AS25361A-2007 CIRCUIT BREAKER - AIRCRAFT@ TRIP-FREE@ PUSH-PULL@ 50 THRU 100 AMP@ TYPE I
Canadian Standards Association (CSA)
- CSA ANSI/CAN/UL 3100-2021 Automated Mobile Platforms (AMPs)
SCC
- ADS AS3115 Channel, Earthing Point, 37 AMP
- ADS AS3114 Channel, Earthing Point, 19 AMP
American Society for Testing and Materials (ASTM)
- ASTM D3735-22 Standard Specification for VM&P Naphthas
- ASTM C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and 75-µm (No. 200) Sieves (Withdrawn 2002)
- ASTM D6192/D6192M-19 Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus
American National Standards Institute (ANSI)
- ANSI/CAN/UL 3100:2023 Automated Mobile Platforms (AMPs)
- ANSI/CAN/UL 3100:2024 Automated Mobile Platforms (AMPs)
North Atlantic Treaty Organization Standards Agency
- STANAG 1137-1997 HELICOPTER MINE COUNTERMEASURES MANUAL - AMP-7(C)
- STANAG 1419-2002 MINE ACTUATION AND CUTTING PARAMETERS - AMP-16
- STANAG 1312-1994 CHARACTERISTICS OF NATO SEA MINES - AMP-13 VOL II
(U.S.) Builders Hardware Manufacturers Association
- BHMA A156.14-1997 Sliding & Folding Door Hardware
Standards Norway
- NS-EN 2599:2001 Aerospace series — Strips in aluminium and aluminium alloys — Thickness 0,25 mm < a < 3,2 mm — Dimensions
- NS-EN 4180:2001 Aerospace series — Circular tubes, for fluids in titanium and titanium alloys — Wide tolerances — Diameter 4 mm < D < 40 mm — Dimensions
Defense Logistics Agency
- DLA MIL-R-6106/14 D VALID NOTICE 1-2011 Relay, Electric, Permanent Drive, 50 AMP, SPDT (D) Double Make Double Break Auxiliary Contacts (5 AMP), Hermetically Sealed
- DLA AN3372 REV 6-2010 RELAY, 200 AMP, 2PST, CLASS O, UNSEALED
American Water Works Association (AWWA)
- AWWA ACE70810 Process and Design Considerations for a MIEX® System