Thermal deformation test

Thermal deformation test, Total:161 items.

The international standard classification for "Thermal deformation test" includes: Plastics , Refractories , Equipment for the chemical industry , Mechanical testing , Manufacturing forming processes , Heat treatment and coating .

The Chinese standard classification for "Thermal deformation test" includes: Basic standards and general methods for synthetic resin and plastic , Shaped insulating refractory , Chemical machinery and equipment parts , Casting , Hot processing technology , Non-ferrous metals and their alloys products in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3997.1-1998 Shaped insulating refractory products--Determination of permanent change in dimension on heating
GB/T 1634-1979 Test method of heat deflection temperature underbending load for plastics

Military Standard of the People's Republic of China-General Armament Department

GJB 1694A-2019 Heat treatment of wrought aluminum alloys
GJB 1694-1993 Specification for heat treatment of deformed aluminum alloys
GJB 9932-2021 Spacecraft thermal deformation test method

Professional Standard - Chemical Industry

HG/T 3216-1987 Long - term heat distortion test method of polypropylene pall ring packing
HG/T 3216-2018 Test method for thermal deformation of plastic tower packing
HGB 4050-1960 Zero deformation test

Professional Standard - Energy and Power Planning

DL/T 1952-2018 Calibration specification of power transformers winding deformation tester
DL/T 1951-2018 General technical specification for winding deformation tester of power transformers

Group Standards of the People's Republic of China

T/QGCML 3042-2024 Transformer winding deformation tester after-sales consulting service specifications
T/QYSJLXH 004-2019 Technical specification for thermal deformation/Vicat temperature measuring instrument

Professional Standard - Machinery

JB/T 12723-2016 Testers for the heat deflection temperature/Vicat softening temperature-Technical specification
JB/T 2980-2025 Test method for hot deformation of investement casting shell
JB/T 2980.1-1999 Test method for hot deformation of investement casting shell

Professional Standard - Aviation

HB 5353.4-1986 Method for Determination of Thermal Deformation of Investment Casting Ceramic Cores
HB/Z 5126-1979 Heat treatment of deformed aluminum alloy
HB 5350.2-1986 Method for determination of thermal deformation of investment casting mold material
HB/Z 276-1995 Heat Treatment of Wrought Aluminium Alloy Parts
HB 5350.2-2004 Test method for properties of investment casting pattern materials -- Part 2: Determination of thermal deformation and thermal stability

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 198-2008 Dynamic Deformation Modulus EVD Tester

Professional Standard - Aerospace

QJ/Z 129-1984 Heat Treatment of Wrought Magnesium Alloy
QJ/Z 127-1984 Heat Treatment of Wrought Aluminium Alloy

Professional Standard - Water Conservancy

SL 122-2012 Calibrating methods of measurement instrument of rock deformation
SL 122-1995 Calibrating Methods of Measurement Instrument of Rock

Taiwan Provincial Standard of the People's Republic of China

CNS 3554-1999 Method of test for tension set of rubber"," vulcanized or thermoplastic

Professional Standard - Non-ferrous Metal

YS/T 591-2025 Heat treatment of wrought aluminium and aluminium alloys
YS/T 591-2017 Heat treatment of wrought aluminium and aluminium alloys
YS/T 591-2006 Heat treatment of wrought aluminium and aluminium alloys

Anhui Provincial Standard of the People's Republic of China

DB34/T 3148-2018 Accuracy Inspection of Thermal Deformation Finishing Specimen of CNC Machining Center

YU-JUS

JUS N.C0.055-1980 Testing of insulated conductors and cables. Hot deformatian
JUS N.C0.055-1985 Electric povverandlighting. Testing of insulatedconductors andcables. Hotdeformation
JUS N.A5.721-1980 Basic environmental testing procedures. TestDb: Damp heat cyctic (12 +12 hour cyck)

Association Francaise de Normalisation

NF T51-070:1974 Plastics. Determination of heat deformation. Martens test.
NF E60-172-10*NF ISO 10791-10:2022 Test conditions for machining centres - Part 10 : evaluation of thermal distortions
NF EN ISO 17695:2005 Footwear - Upper Test Methods - Deformability
NF ISO 10791-10:2022 Test conditions for machining centres - Part 10: Evaluation of thermal deformations

British Standards Institution (BSI)

BS ISO 10791-10:2022 Test conditions for machining centres. Evaluation of thermal distortions
BS EN 60695-10-3:2016 Fire hazard testing. Abnormal heat. Mould stress relief distortion test
BS 2782-1 METHOD 122A:1976 Methods of testing plastics. Thermal properties-Determination of deformation under heat of flexible polyvinyl chloride compound
BS 7134-3.5:1989 Testing of engineering ceramics - Thermo-mechanical properties - Methods for determination of pyroplastic deformation (sagging)
21/30400886 DC BS ISO 10791-10. Test conditions for machining centres. Part 10. Evaluation of thermal distortions
BS 4HR 100:2010 Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
BS EN 60695-10-3:2002 Fire hazard testing - Abnormal heat - Mould stress relief distortion test
BS IEC 62715-6-1:2018 Flexible display devices. Mechanical test methods. Deformation tests
BS ISO 10791-10:2007 Test conditions for machining centres - Evaluation of thermal distortions
BS EN ISO 17695:2005 Footwear. Test methods for uppers. Deformability
BS DD ENV 820-4:2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties-Determination of flexural creep deformation at elevated temperatures

Spanish Association for Standardization (UNE)

UNE 53 026 Determination of thermal deformation of molded plastics
UNE-EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
AENOR UNE-EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
UNE-EN 60695-10-3:2002 Fire hazard testing -- Part 10-3: Abnormal heat - Mould stress relief distortion test.
UNE-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
AENOR UNE 53026:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT DEFORMATION OF MOLDED PLASTIC MATERIALS
UNE-EN 13513:2002 Footwear- Test methods for uppers - Deformability.
AENOR UNE-EN 60695-10-3:2017 Testing for fire risks. Part 10-3: Abnormal heat. Deformation test due to release of molding stresses.

Gosstandart of Russia

GOST 8733-1987 Seamless cold and warm deformed tubes. Technical requirements
GOST 8733-1974 Seamless cold and warm deformed pipes. Specifications
GOST R 53383-2009 Hot-deformed seamless steel pipes. Specifications
GOST 8731-1987 Seamless hot-rolled steel tubes. Specifications
GOST 32528-2013 Hot-deformed seamless steel pipes. Specifications
GOST 8731-1974 Seamless hot-deformed steel pipes. Specifications
GOST 12248.10-2020 Soils. Determination of strain deformation parameters of frozen soils by compression testing
GOST R ISO 815-2-2017 Vulcanized rubber and thermoplasts. Determination of compression set. Part 2. Test at low temperatures
GOST 9941-1972 Seamless cold- and heat-deformed pipes made of corrosion-resistant steel

Ente Nazionale Italiano di Unificazione

UNI EN ISO 9886:2002 Evaluation of thermal strain by physiological measurements
UNI ISO 10791-10:2024 Test conditions for machining centres - Part 10: Evaluation of thermal distortions
UNI EN 129:1985 Methods of testing doors. Test for deformation in torsion of the door leaves.
UNI ISO 10791-10:2010 Test conditions for machining centres - Part 10: Evaluation of thermal distortions
UNI 3262-1952 Wood test. Deformation elastic coefficient measurement
UNI 5067 P-1962 Wood fiber panel testing. Deformation resistance measurement

Bureau of Indian Standards

IS 15250-10-2024 Test Conditions for Machining Centres - Part 10 Evaluation of Thermal Distortions
IS 10810-15-1984 Methods of Test for Cables - Part 15 : Hot Deformation Test
IS 11239-6-1985 Methods of Test for Rigid Cellular Thermal Insulation Materials - Part 6 : Heat Distortion Temperature

Korean Agency for Technology and Standards (KATS)

KS B ISO 10791-10-2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS M 3038-2013 Test method for tensile heat distortion temperature of plastic sheeting
KS M 3038-2006(2011) Test method for tensile heat distortion temperature of plastic sheeting
KS M 6785-2022 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS B ISO 13041-8-2018 Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions
KS B ISO 13041-8:2018 Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions
KS M 6791-2010 Permanent set testing methods for rubber, vulcanized or thermoplastic

GCC Standardization Organization

GSO ISO 17695:2008 Footwear-Test methods for uppers- deformability
GSO ISO 3187:2015 Refractory products -- Determination of creep in compression
GSO IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions

PL-PKN

PN P55127-1990 Phototypes tting Testing of graphic deformations
PN P04974-1988 Determination of heat transfer coefficient and changes in appearance due to thermal radiation
PN B06086-1992 Methods of testing doors. Test for deformation in torsion of the door leaves

IN-BIS

IS 10810 Pt.15-1984 Cable test methods Part 15 Thermal deformation test
IS 11239 Pt.6-1985 Test methods for rigid cellular thermal insulation materials Part 6 Thermal distortion temperature

American Society for Testing and Materials (ASTM)

ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1651-11(2018) Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM STP 1387-2000 Multiaxial Fatigue and Deformation: Testing and Prediction
ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

Associação Brasileira de Normas Técnicas

ABNT MB-231-1959 Dimension and deformation detection of flat heat-resistant parts

Swedish Institute for Standards

SS-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

RO-ASRO

STAS 9764-1983 THERMOINSULATING SHAPED REFRACTORIES Determination of permanent change of dimensions after heating at high temperatures
SR EN 108-1996 Methods of testing doors Test for deformation of the leaf in its plane
STAS SR 13305-1996 General tests for machine tools Method of testing performance of machines operating under loaded conditions in respect of thermal distortion

German Institute for Standardization

DIN EN 14621:2006-03 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns; German version EN 14621:2005
DIN 1996-17:1990-11 Testing of asphalt; determination of dimensional stability when heated (Nüssel deformation index)
DIN 7795:2015-02 Measuring compression set of elastomers in hot water
DIN 7795:2015 Measuring compression set of elastomers in hot water
DIN 7795:2021 Measuring compression set of elastomers in hot water
DIN 53572:1965 Determination of soft elastic foam plastics: Compression set test after constant deformation
DIN 7795:2020-09 Draft Document - Measuring compression set of elastomers in hot water
DIN 7795 E:2020-09 Measuring compression set of elastomers in hot water
DIN 7795:2021-03 Measuring compression set of elastomers in hot water
DIN 7795 E:2013-03 Measuring compression set of elastomers in hot water
DIN EN ISO 17695:2005-12 Footwear - Test methods for uppers - Deformability (ISO 17695:2004); German version EN ISO 17695:2005
DIN EN 60695-10-3 E:2015-12 Draft Document - Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test (IEC 89/1263/CDV:2015); German version FprEN 60695-10-3:2015

Lithuanian Standards Office

LST EN 14621-2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
LST EN 60695-10-3-2003 Fire hazard testing. Part 10-3: Abnormal heat. Mould stress relief distortion test (IEC 60695-10-3:2002)

Comitato Elettrotecnico Italiano

CEI EN 60695-10-3:2017 Fire Hazard Tests Part 10-3: Abnormal Heat - Molding Tension Release Deformation Test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
OS GSO ISO 2477:2015 Shaped insulating refractory products -- Determination of permanent change in dimensions on heating
OS GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
BH GSO ISO 10791-10:2016 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions

Danish Standards Foundation

DANSK DS/EN 14621:2005 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DS/EN 14621:2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DANSK DS/EN 60695-10-3:2016 Fire hazard testing – Part 10-3: Abnormal heat – Mould stress relief distortion test
DS/EN 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

GM Europe

GME L-5-9-2007 Brake Pedal Durability and Deformation Test
GME L-6A02-3-1999 Cylinder Distortion Measurement

Standards Norway

NS 481-2:1968 Reinforcing steel — Hot roled deformed bars
NS 3552:1976 Method for testing deformation of flexible sewers
NS 7014:1977 Description pattern for reinforcing steel, hot-rolled deformed
NS 7014-1977 Description pattern for reinforcing steel, hot-rolled deformed

Austrian Standards

ONORM EN 108-1981 Methods of testing doors; Test of deformation of the leaf in its plane
ONORM EN 129-1985 Methods of testing doors; fest for deformation in torsion of the door leaves
ONORM A 5523-1981 Packaging testing; Thermal shock fest on glass Containers

SE-SIS

SIS 20 03 04 plastic. Test Methods. Deformation limit
SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set

Standard Association of Australia （SAA）

AS 60695.10.3:2006 Fire hazard testing - Abnormal heat - Mould stress relief distortion test
AS 4046.1:2002 Methods of testing roof tiles - Determination of distortion
AS 4046.1:1992 Methods of testing roof tiles - Determination of distortion
AS 1545:1976 Methods for the calibration and grading of extensometers

Japanese Industrial Standards Committee (JISC)

JIS K 6262:1997 Permanent set testing methods for rubber, vulcanized or thermoplastic
JIS K 6273:2018 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 6273:2006 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 7122:1987 Testing methods for heat of transitions of plastics
JIS K 6254:2003 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties at low deformation

CU-NC

NC 97-58-1985 Packaging. Glass Containers Determination of Deformations

GM Daewoo

GMKOREA EDS-T-2233-2010 Deformation Test of Rear Axle Transmissions

The American Road & Transportation Builders Association

AASHTO T 256-2001(2020) Standard Method of Test for Pavement Deflection Measurements
AASHTO T 256-2001(R2020) Standard Method of Test for Pavement Deflection Measurements

Indonesia Standards

SNI ISO 10791-10:2007 Test conditions for machining centres - Part 10: Thermal distortion evaluation (ISO 10791-10:2007, IDT)

Türk Standardları Enstitüsü

TS 2302-1977 SliAPED INSULATING REFRACTORY PRODUC T3 - DETERMINATION OF THE PERMANENT CHANGE ?N DIMENSIONS ON HEATING

NL-NEN

NEN 2617-1981 Shaped insu lating refractory products — Determination of the permanent change in dimensions on heating

South African Bureau of Standard

SANS 5900:1983 Warpage and squareness of refractory bricks

PT-IPQ

NP 2337-1988 Methods of testing doors Test for deformation of the leaf in its plane

CZ-CSN

CSN 64 0144-1978 Plastics. Heat distortion point by Martens

American National Standards Institute （ANSI)

ANSI/SCTE 109-2010 Test Procedure for Common Path Distortion (CPD)

AGMA - American Gear Manufacturers Association

10FTM04-2010 Low Distortion Heat Treatment of Transmission Components

International Electrotechnical Commission (IEC)

IEC PAS 60191-6-19:2008 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of package warpage at elevated temperature and the maximum permissible warpage

GM North America

GM GM9310P-1988 Variable Surface Temperature Heat Exposure Test

SCC

ADS TS355 Test for Electrical Connectors - Contact Deformation after Crimping