Polyacrylate Aging

Polyacrylate Aging, Total:346 items.

The international standard classification for "Polyacrylate Aging" includes: Surface active agents , Chemicals for purification of water , Other organic chemicals , Thermoplastic materials , Adhesives , Aliphatic hydrocarbons , Alcohols. Ethers , Esters , Paints and varnishes , Rubber , Organic acids , Rubber and plastics products in general , Essential oils , Binders. Sealing materials , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Polyacrylate Aging" includes: Water treatment agent , General organic chemicals , Synthetic resin and plastic , Adhesives , Coating , Synthetic rubber , Daily use plastic products , Fragrances and flavors , Flavoring agents , Synthetic food additives , Sealing material , Tobacco curing in general , Electrical insulating material and its products .

Taiwan Provincial Standard of the People's Republic of China

CNS 3278-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Aging Test)
CNS 4933-1987 Acrylic Resin Baking Enamel
CNS 8637-1989 Heat Curing Acrylic Resin for Dental Crown
CNS 2637-1984 Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth
CNS 3272-1977 Polymethylmethacrylate Corrugated Sheet
CNS 2229-1971 Method of Test for Methylacrylate Sheet for General Use
CNS 13547-1995 Method of Test for Polymethyl Methacrylate Moulding Materials
CNS 2228-1971 Methylacrylate Sheet for General Use
CNS 2638-1984 Method of Test for Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth
CNS 5830-1980 Ethyl Acrylate
CNS 3273-1977 Method of Test for Polymethlmethacrylate Corrugated Sheet
CNS 5831-1980 n - Butyl Acrylate
CNS 8636-1989 Self-Curing Acrylic Resin for Dental Restoration
CNS 12143-1987 Acrylic Resin Varnish
CNS 13546-1995 Polymethyl Methacrylate Moulding Materials
CNS 5832-1980 2 - Ethylhexyl Acrylate

Professional Standard - Chemical Industry

HG/T 4947~4948-2016 Cosmetic ingredients-Lauryl phosphate
HG/T 2429-1993 Water treatment agent acrylic acid-acrylic ester copolymer
HG/T 2305-1992 Methyl Methacrylate for Industrial Use
HG/T 5471～5473-2018 Methyl Methacrylate, Butadiene, Styrene Terpolymer (MBS) Resins, Triallyl Isocyanurate and Polyethylene Oxide (2018)
HG/T 2429-2006 Water treatment chemicals - Acrylic acid - Acrylates copolymer
HG/T 2429-2014 Water treatment chemicals. Acrylic acid-Acrylates copolymer
HG/T 2628-1994 Polymethyl methacrylate (PMMA) molding material nomenclature

Professional Standard - Petrochemical Industry

SH/T 1542-2023 Plastics — Determination of thermal oxidative stability for polypropylene and propylene -copolymers in air — Oven method
SH 2604.04-2003 Water treatment chemicals - Polyacrylic acid/sodium polyacrylate
SH 2604.06-2003 Water treatment chemicals - Acrylic acid - acrylate series copolymer

Group Standards of the People's Republic of China

T/CPCIF 0320-2023 Sodium acrylate by-produced in acrylic esters production
T/HBTL 011-2020 Polyurethane/Polyacrylate Latex Interpenetrating Network Polymer Emulsion
T/CSTM 00065-2019 Catalyst for oxidation of acrolein to acrylic acid
T/GDID 1085-2023 Polymethyl methacrylate (PMMA) bathtub
T/HEBQS 014-2023 Polymethyl methacrylate (PMMA) waterproof coating
T/ZZB 2369-2021 Poly (methyl methacrylate)(PMMA) cast noise barriers
T/SDHCIA 021-2022 Mixted solution of acrylic acid dimer and acrylic acid
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/GRM 030-2021 Allyl isobutyl xanthate
T/CIESC 48-2023 2-(Perfluorohexyl) Ethyl Methacrylate、perfluorohexyl ethyl acrylate for industrial use
T/SHPTA 066-2023 Plastics-Modified Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for vehicle
T/CPCIF 0136-2021 2-Hydroxyethyl methacrylate，Hydroxypropyl methacrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl methacrylate）& Hydroxypropyl acrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl acrylate）for industrial use
T/GDPIA 51-2022 Anti-squeaking PC/ABS material for automotive interiors
T/SDAQI 073-2022 Pipes and fittings made of acrylate polymer blended with poly（vinyl chloride）resin for water supply
T/SDHCIA 022-2022 Mixted solution of butyl-β-butoxypropanoate and n-butyl acrylate
T/SDSCCE 059-2024 Poly(pentabromobenzyl acrylate) by-product sodium bromide
T/CSTM 00508-2021 Chain extender—2-Propenoic acid, 2-methyl-,oxiranylmethyl ester, methyl
T/QGCML 3926-2024 R-propylene carbonate
T/ZZB 2350-2021 Transparent antistatic poly（ methyl methacrylate）sheets
T/NXCIA 001-2019 Water base acrylic acid/polyurethane coating
T/ZZB 2437-2021 Polypropylene esters flame retardant waterborne coating for curtains
T/CPCIF 0077-2020 2-Hydroxyethyl acrylate for industrial use
T/CPCIF 0094-2021 Initiator for vinyl chloride polymerization -Cumyl peroxy neodecanoate (CNP)
T/CASME 20-2022 Acrylic acid and acrylate dispersants for paper making
T/DLSHXH 004-2017 High solid acrylic polyurethane topcoat

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15597-1995 Polymethyl methacrylate (PMMA) moulding materials
GB/T 10533-2014 Water treatment chemicals—Polyacrylic acid
GB/T 17530.5-1998 Acrylic acid and acrylate esters for industrial use - Determination of monomethyl ether of hydroquinone
GB/T 17529.5-2023 Acrylic acid and acrylates for industrial use—Part 5：2-Ethylhexyl acrylate for industrial use
GB/T 26690-2011 Acrylic coated biaxially oriented polypropylene film
GB/T 17529.1-2023 Acrylic acid and acrylates for industrial use—Part 1：Acrylic acid for industrial use
GB/T　17530.4-1998 Determination of acidity of industrial acrylates
GB/T 17529.4-2023 Acrylic acid and acrylates for industrial use—Part 4：n-Butyl acrylate for industrial use
GB/T　17529.2-1998 Industrial methyl acrylate
GB/T　17529.4-1998 Industrial n-butyl acrylate
GB/T 29641-2013 Poly(methyl methacrylate) (PMMA) cast noise barriers
GB/T 31124-2014 Poly propylene carbonate(PPC)
GB/T 17529.2-1998 Methyl acrylate for industrial use
GB/T 17529.5-1998 2-Ethylhexyl acrylate for industrial use
GB/T　17529.5-1998 Industrial 2-Ethylhexyl Acrylate
GB/T　17530.5-1998 Determination of polymerization inhibitor in industrial acrylic acid and ester
GB/T 24147-2009 Waterborne ultraviolet curable resin—Water soluble unsaturated polyester acrylate resin
GB/T 42790-2023 Acrylic ester / vinyl chloride graft co-polymer resin
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 33428-2016 Polyacrylate rubber--General specification and evaluation procedure
GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
GB/T 17530.5-1998 Acrylic acid and acrylate esters for industrial use - Determination of monomethyl ether of hydroquinone
GB/T　17529.3-1998 Industrial ethyl acrylate
GB/T 17529.3-2023 Acrylic acid and acrylates for industrial use—Part 3：Ethyl acrylate for industrial use
GB/T 17529.4-1998 n-Buthyl acrylate for industrial use
GB/T 17529.2-2023 Acrylic acid and acrylates for industrial use—Part 2：Methyl acrylate for industrial use
GB/T 17530.4-1998 Acrylate esters for industrial use - Determination of acidity
GB/T 17529.3-1998 Ethyl acrylate for industrial use
GB/T 30778-2014 Polyvinyl acetate-acrylate mulsion adhesive for the laminating of paper/polymer films at room temperature
GB/T 17529.1-2008 Acrylic acid and acrylate esters for industrial use - Part1：Acrylic acid for industrial use
GB/T 10533-2000 Water treatment chemicals-Polyacrylic acid

Professional Standard - Light Industry

QB/T 2648-2004 Food additive -- Allul hexanoate
QB/T 4216-2011 Allyl phenoxyacetate
QB/T 4215-2011 Allyl heptanoate
QB 1119-1991 Food Additive - Allyl Cyclohexane Propionate
QB/T 3794-1999 Food additive Allyl hexanoate
QB/T 1119-2007 Food additive-Allyl cyclohexane propionate
QB/T 2519-2011 Allyl hexanoate
QB/T 3650-1999 Moulding Compound for Methyl Methyacrylate Copolymerization
QB/T 2519-2001 Allyl caproate
QB/T 4814-2015 Fragrance. Tricyclodecenyl propionate

Professional Standard - Agriculture

409药典四部-2015 Pharmaceutical Excipient Product Name Wuhua Ethyl Acrylate-Methyl Methacrylate Copolymer Aqueous Dispersion
721兽药典一部-2015 Text Variety Part Two Fourteen Frames Polyammonium Methacrylate Ⅰ
579药典四部-2015 Pharmaceutical Excipients Product Name Fourteen-painted Polyammonium Methacrylate Ⅰ
2258药典二部-2010 Part II Seventeen strokes polyammonium methacrylate I
2259药典二部-2010 Part 2 Seventeen strokes polyammonium methacrylate II
580药典四部-2015 Pharmaceutical excipients product name fourteen polyammonium methacrylate Ⅱ
549兽药典一部-2015 The second part of the main text variety five-paint ethyl acrylate-methyl methacrylate copolymer aqueous dispersion
663药典四部-2020 Pharmaceutical excipients product name fourteen polyammonium methacrylate Ⅱ
GB 10349-1989 Food additive--Allyl hexanoate
451药典四部-2020 Pharmaceutical Excipient Product Name Wuhua Ethyl Acrylate-Methyl Methacrylate Copolymer Aqueous Dispersion
662药典四部-2020 Pharmaceutical Excipients Product Name Fourteen-painted Polyammonium Methacrylate Ⅰ

Professional Standard - Building Materials

JC/T 2251-2014 Polymethyl methacrylate coating for waterproofing
JC/T 484-2006 Acrylic sealant for building
JC/T 484-1992 Acrylic building sealant

Professional Standard - Aerospace

QJ 1597-1989 General process of acrylic polyurethane enamel coating

未注明发布机构

DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)

Professional Standard - Tobacco

YC/T 411-2011 Determination of acrylates and methacrylates in water-borne adhesives applied on polypropylene tow for making cigarette filter rod—Gas chromatography-mass spectrometry method

Fujian Provincial Standard of the People's Republic of China

DB35/T 1641-2017 Acrylonitrile-styrene-acrylate terpolymer (ASA) synthetic resin tile technical conditions

工业和信息化部

HG/T 5786-2021 Propylene carbonate for industrial use
HG/T 5709-2020 1-Propene-1,3-sultone
HG/T 5471-2018 Resin methyl methacrylate-butadiene-styrene (MBS)
HG/T 2305-2017 Methyl methacrylate for industrial use
YS/T 1214-2018 Allyl isopentylxanthate
HG/T 5472-2018 1,3,5-Tri-2-propenyl-1,3,5-triazine-2,4,6(1H，3H，5H)-trione

Professional Standard - Commodity Inspection

SN/T 3183-2012 Food contact materials - Polymers-Determination of methylmethacrylate in polymethyl methacrylate - Gas chromatography

Professional Standard - Aviation

HB 5444-1990 SYT-1 Acrylic Adhesive

Professional Standard - Pharmaceutical Packaging

YBB 0013-2005 Yaoyong Juzhi/la/jubingxi Fengkou Dianpian Foil Laminated Closure Liners (PET/Al/PP) for Pharmaceutical Packaging

Military Standard of the People's Republic of China-General Armament Department

GJB 9437-2018 Specification for room temperature curing two-component acrylic adhesives

Professional Standard - Machinery

JB/T 8151.3-1999 Glass Textile Sleeving Withacrylic Based Coating

GM Daewoo

GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer
GMKOREA EDS-M-4644-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend (III)
GMKOREA EDS-M-5761-2014 Polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 6; English/Korean)
GMKOREA EDS-M-5762-2014 Blow molded polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 4; English/Korean)
GMKOREA EDS-M-4642-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend for Metal Plating

GM Europe

GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000530-1996 Polymethylmethacrylat, modifiziert Polymethyl Methacrylate, Modified English/German
GME QK 000242-2009 Acrylic Ester-Styrene-Acrylonitrile-Terpolymer (English/German)
GME STD 518654-1994 Plastic 8654 ASA+PC Plast 8654 ASA+PC English/Swedish
GME QK 000172-2005 Acrylate-Styrene-Acrylonitrile Terpolymer English/German
GME QK 000234-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English/German
GME QK 000230-1996 ASA + PC - Blend ASA + PC - Blend English/German
GME QK 000531-2004 Polymethyl Methacrylate (English/German)
GME QK 000243-2010 Acrylate-styrene-acrylonitrile terpolymer. 1st edition. English/German
GME QK 000234-2010 Acrylate-styrene-acrylonitrile terpolymer English/German. 3rd edition
GME QK 000226-2010 Acrylate-styrene-acrylonitrile terpolymers. 3rd edition English/German
GME QK 000975-2008 Polyacrylat Elastomer Polyacrylate Elastomer English/German
GME QK 000976-2008 Polyacrylat Elastomer Polyacrylate Elastomer English/German
GME QK 003200-1998 Polymethyl methacrylate (PMMA) English/German
GME QK 000230-2010 ASA + PC - Blend (Issue 3; English/German)
GME QK 000529-1989 Polymethylmethacrylat, modifiziert Polymethyl Methacrylate, Modified English/German
GME STD 518852-1998 Plastic 8852 PE/PMMA Plast 8852 PE/PMMA English/Swedish
GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 000226-1996 Acrylester-Styrol-Acrylnitril-Copolymerisat Acrylic Ester-Styrene-Acrylonitrile-Copolymer English/German [Replaced: GME QK 000220, GME QK 000220]
GME QK 001271-2010 Mixtures of polyamide 6 and acrylonitrile-styrene-acrylate (Issue 1; English/German)
GME STD 518286-1987 Plastic 8286 (PMMA) Plast 8286 (PMMA) English/Swedish
GME QK 000195-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000227-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000642-2005 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000626-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000638-2005 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 000188-2003 Blend from PC and ABS Blend from PC and ABS English/German
GME QK 001955-2003 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000637-2005 Blend from PBT and ASA with Glass Fibres (English/German)
GME QK 000633-2007 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 001961-2005 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000216-2005 Blend from ABS and PC (English/German)
GME QK 000195-2010 Blend from PC and ABS (English/German)
GME QK 000642-2010 Blend from PBT and ASA with Glass Fibres (Issue 3; English/German)
GME QK 000023-1987 Ethylen-Acryls鋟re-Copolymerisat Ethylene-Acrylic Acid-Copolymer German
GME QK 000626-2010 Blend from PBT and ASA with Glass Fibres (Issue 4; English/German)
GME QK 001909-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German

American Society for Testing and Materials (ASTM)

ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2000) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2013) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D4802-01 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-10 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-94 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-15 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D3826-98(2002) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D788-02 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D788-96 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D3826-98(2008) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D4709-07(2012) Standard Specification for Methyl Acrylate
ASTM D3548-09(2017) Standard Specification for Ethyl Acrylate
ASTM D788-05 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D788-12 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D4709-93(1999) Standard Specification for Methyl Acrylate
ASTM D4709-02 Standard Specification for Methyl Acrylate
ASTM D788-06 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D3548-09(2023) Standard Specification for Ethyl Acrylate
ASTM D3548-09 Standard Specification for Ethyl Acrylate
ASTM D3547-91(2000) Standard Specification for n -Butyl Acrylate
ASTM D788-14 Standard Classification System for Poly40;Methyl Methacrylate41; 40;PMMA41; Molding and Extrusion Compounds
ASTM D4709-07 Standard Specification for Methyl Acrylate
ASTM D3547-91(1996)e1 Standard Specification for n -Butyl Acrylate
ASTM D788-04 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D5436-03(2008) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

Korean Agency for Technology and Standards (KATS)

KS M 3811-2022 Polymethyl methacrylate sheets
KS M 3811-1995 Polymethyl methacrylate sheets
KS M 3811-2011 Polymethyl methacrylate sheets
KS M 3811-2016 Polymethyl methacrylate sheets
KS M 3811-2016(2021) Polymethyl methacrylate sheets
KS M 3152-2005 Polymethyl methacrylate moulding materials
KS M 3152-2002 Polymethyl methacrylate moulding materials
KS M 3152-1982 Polymethyl methacrylate moulding materials
KS M 3103-2022 Methyl methacrylate
KS M 3103-2017 Methyl methacrylate
KS M 3103-2007 Methyl methacrylate
KS M 3103-1982 Methyl methacrylate
KS M 3103-2017(2022) Methyl methacrylate
KS M 3356-2016(2021) Diallyl phthalate molding compounds
KS P ISO 17190-2:2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 2:Test method for determination of the amount of residual acrylate monomers

RO-ASRO

STAS 7507-1987 METHYL POL YMETHACR YLATE PLATES
STAS 10577-1982 POLYACRIL KUBBER General technical requirements for quality

Japanese Industrial Standards Committee (JISC)

JIS K 6718:1993 Polymethyl methacrylate sheets
JIS K 6717:1995 Polymethyl methacrylate moulding materials
JIS S 0251:2018 Water-absorbent polyacrylate for urine absorbing products
JIS Z 4572:2014 Standard practice for use of a polymethylmethacrylate dosimetry system

(U.S.) Ford Automotive Standards

FORD ESE-M8G66-A-1978 OIL SEAL, POLYACRYLIC RUBBER
FORD WSS-M4D682-A5-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D682-A3-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD MS4-59-1991 IMPREGNATION OF CASTINGS - THERMO CURE ACRYLIC POLYESTER WET VACUUM METHOD
FORD ESK-M4G298-A-1987 SEALER, POLYACRYLIC ESTER - EXPANDING - WELDABLE - EC-COATABLE - HEAT CURING
FORD FLTM AP 001-01-2001 DETERMINATION OF ADEQUATE SEAL CURE OF ACRYLIC RUBBER
FORD WSS-M4D833-B1-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D682-A-2005 ACRYLONITRILE STYRENE ACRYLATE/POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MEDIUM IMPACT STRENGTH, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

British Standards Institution (BSI)

BS 6747:1987 Specification for orthodontic resins
BS 2690-15:1974(1999) Methods of testing Water used in industry — Part 15 : Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
BS 7969:2004(2009) Adhesives — Ethyl and methyl cyanoacrylate types
BS 2690-15:1974 Methods of testing water used in industry - Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS ISO 17190-2:2021 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of the amount of residual acrylate monomers

SCC

ASTM D4802-01a Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
HOLDEN HN 2024-2014 ACTIVATOR FOR CYANOACRYLATES
HOLDEN HN 1782-2012 ASA (Acrylonitrile-styrene-acrylate) Compounds and Blends
HOLDEN HN 1782-2001 ASA (Acrylonitrile - Styrene Acrylate) Compounds and Blends
MIL MIL-I-10903-1951 ISOBUTYL METHACRYLATE POLYMER, AE
HOLDEN HN 1643-2008 BASE COAT / CLEAR COAT ENAMEL TOPCOAT (POLYESTER / ACRYLIC)
HOLDEN HN 2006-2013 Adhesive - Cyanoacrylate - Fast Curing
HOLDEN HN 2006-1989 Adhesive Cyanoacrylate - Fast Curing
HOLDEN HN 2487-2006 PRIMER FOR CYANOACRYLATES
HOLDEN HN 2487-2014 PRIMER FOR CYANOACRYLATES
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
HOLDEN HN 2028-2003 ADHESIVE - CYANOACRYLATE
HOLDEN HN 1539-2000 Cyanoacrylate Adhesives
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 1539-2012 Cyanoacrylate adhesive
HOLDEN HN 2270-2000 Adhesive - Cyanoacrylate
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
CAN/CGSB-1.159-1992 Acrylic Cellulose Nitrate Gloss Lacquer
MIL MIL-R-43942-1976 ROPE, FIBROUS, POLYESTER/POLYPROPYLENE DUAL FIBER
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
HOLDEN HN 1395-2003 ADHESIVE - METHYL CYANOACRYLATE
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 24669:2021 Water-absorbent polyacrylate in urine absorbing products – Requirements
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
AENOR UNE 53202:1976 PLASTIC MATERIALS. DETERMINATION OF VINYL ACETATE IN CHLORIDE-VINYL ACETATE COPOLYMERS
BS ISO /ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system
DANSK DS/ISO 17190-2:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 2: Test method for determination of the amount of residual acrylate monomers

Association Francaise de Normalisation

NF T53-031:1990 Plastics. Poly(methyl methacrylate) (pmma) moulding and extrusion materials. Part 1 : designation.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio

SE-SIS

SIS 16 66 21-1970 Poly(methyl methacrylate) moulding and extrusion compounds

CZ-CSN

CSN 64 3412-1974 Polymethyl methacrylate lates transparent coloured
CSN 64 3411-1974 plates transparent colouress olymethyl methacrylate
CSN 64 3414-1974 Polymethyl methacrylate lates pearlescent coloured otdrawing and drawing
CSN 64 3413-1974 Polymethyl methacrylate lates semitransparent and opaque oloured
CSN 66 1975-1983 Methyl metacrylate (monomer)

VDI - Verein Deutscher Ingenieure

VDI/VDE 2476 Blatt 2-1974 Polymethylmethacrylate semi-finished products

Society of Automotive Engineers (SAE)

SAE AMS3101B-2011 Adhesion Promotoer for Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate
SAE AMS3101-1998 Adhesion Promoter for Polysulfide Sealants, Non-Crazing of Acrylic and Polycarbonate
SAE AMS3248B-1990 Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55-65

Indonesia Standards

SNI 7863-2013 Etil akrilat
SNI 06-1299-1989 Acrylate sheet
SNI 7864-2013 n-Butil akrilat
SNI 06-2873-1992 Methyl methacrylate
SNI 7862-2013 2-Etilheksil akrilat

German Institute for Standardization

DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

TH-TISI

TIS 655.2-2011 Plastic utensils for food.part 2: poly (vinyl chloride) polycarbonate polyamide and poly (methyl methacrylate)
TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)

ES-UNE

UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

Danish Standards Foundation

DS/ISO 24669:2021 Water-absorbent polyacrylate in urine absorbing products – Requirements
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/ISO 17190-2:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 2: Test method for determination of the amount of residual acrylate monomers

GSO

GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 17190-2:2024 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 2: Test method for determination of the amount of residual acrylate monomers
BH GSO ISO/ASTM 51276:2015 Practice for use of a polymethylmethacrylate dosimetry system

Lithuanian Standards Office

LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

General Motors Corporation (GM)

GM 9985955-1994 Adhesive, Two-Part, Acrylic, Activator
GM 9985889-1993 Adhesive, Two-Part, Acrylic, Activator
GM 9985871-1993 Adhesive, Two-Part Acrylic, Hardener
GM 9985952-1993 Adhesive, Two-Part Acrylic, Activator
GM 9985727-1993 Adhesive, Two-Part, Acrylic, Activator Revision A

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

International Organization for Standardization (ISO)

ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 24669:2021 Water-absorbent polyacrylate in urine absorbing products — Requirements
ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO/ASTM 51276:2002 Practice for use of a polymethylmethacrylate dosimetry system
ISO 7823-1:1991 Poly(methyl methacrylate) sheets; types, dimensions and characteristics; part 1: cast sheets
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 15558:1998 Practice for use of a polymethylmethacrylate dosimetry system

RU-GOST R

GOST 16756-1971 Butyl methacrylate. Specifications
GOST 20370-1974 Methyl methacrylate. Specifications

IT-UNI

UNI 7074-1972 Polymethyl methacrylate sheet. Types, regulations and tests

European Committee for Standardization (CEN)

EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
prEN 249-1986 Specification for shower trays for domestic purposes made from acrylic materials
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat

GM Global

GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English

KR-KS

KS P ISO 17190-2-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 2:Test method for determination of the amount of residual acrylate monomers

PL-PKN

PN C89111-01-1992 Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Designation

American National Standards Institute （ANSI)

ANSI/ASTM E1276:2010 PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM
ANSI/ASTM D5436:1999 Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes and Shapes