dsc time temperature

dsc time temperature, Total:174 items.

The international standard classification for "dsc time temperature" includes: Plastics in general , Rubber .

The Chinese standard classification for "dsc time temperature" includes: Basic standards and general methods for synthetic resin and plastic , Rubber products in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
GB/T 19466.6-2009 Plastics—Differential scanning calorimetry(DSC)—Part 6:Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT)
GB/T 7142-2002 Determination of time-temperature limits for plastics after prolonged exposure to heat
GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GB/T 2941-1991 Standard temperature, humidity and time for environmental regulation and testing of rubber samples

未注明发布机构

DIN EN ISO 11357-5 E:2013-09 Differential Scanning Calorimetry (DSC) for Plastics Part 5: Determination of Characteristic Reaction Curves Temperature, Time, Reaction Enthalpy and Degree of Conversion (Draft)
DIN EN ISO 11357-6 E:2017-05 Differential Scanning Calorimetry (DSC) for Plastics Part 6: Determination of Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Temperature (Dynamic OIT) (Draft)
DIN EN ISO 11357-6 E:2012-07 Differential Scanning Calorimetry (DSC) for Plastics Part 6: Determination of Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Temperature (Dynamic OIT) (Draft)
IPC TR-465-2 Effect of Steam Aging Time and Temperature on Solderability Test Results

Group Standards of the People's Republic of China

T/JLA 004-2023 Calibration method for temperature and time parameters of washer-disinfector

National Metrological Technical Specifications of the People's Republic of China

JJF 2088-2023 Calibration Specification for Temperature,Pressure and Time Parameters of Large Steam Sterilizers

British Standards Institution (BSI)

BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS EN ISO 11357-6:2018 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
24/30482199 DC BS EN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
BS ISO 19935-1:2018 Plastics. Temperature modulated DSC - General principles
24/30482195 DC BS EN ISO 11357-5 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
24/30486234 DC BS ISO 4076 Polyphenylsulphone (PPSU) - Effect of time and temperature on expected strength
BS ISO 19935-2:2020 Plastics. Temperature modulated DSC. Measurement of specific heat capacity c p

SCC

BS 1041-7:1964 Code for temperature measurement-Temperature/time indicators
DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat
12/30258001 DC BS ISO 11357-5. Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
DANSK DS/EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
AENOR UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
NS-EN ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DANSK DS/EN ISO 11357-6:2018 Plastics – Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
07/30161721 DC BS ISO 11357-6. Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
UNE 53509:1995 RUBBER. TIMES, TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
NS-EN ISO 11357-6:2013 Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
AENOR UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
AENOR UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
NS-EN ISO 11357-5:2014 Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
NS-EN ISO 2578:1998 Plastics — Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
VDI/VDE 3522 BLATT 2-2014 Time behavior of contact thermometers — Experimental determination of time percentage values
DIN EN ISO 11357-5 E:2013 Draft Document - Plastics - Differential scanning calorimetry (DSC) - Part 5 : Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version FprEN ISO 11357-5:2013
DIN EN ISO 11357-6 E:2017 Draft Document - Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2017); German and English version prEN ISO 11357...
AWWA JAW31524 Journal AWWA — Carbon Regeneration: Dependence on Time and Temperature
BS ISO 11357-6:2002 Plastics. Differential scanning calorimetry (DSC)-Determination of oxidation induction time
DANSK DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
04/30125959 DC ISO 24033. Pipes made of raised-temperature-resistance polyethylene (PE-RT). Effect of time and temperature on the expected strength
AWWA WQTC64117 The Optimal Holding Time and Temperature for Legionella pneumophila Water Samples
07/30154523 DC BS ISO 24033. Polyethylene of raised-temperature- resistance (PE-RT). Pipes. Effect of time and temperature on the expected strength
DANSK DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
08/30190962 DC BS ISO 3213. Polypropylene (PP) pipes. Effect of time and temperature on expected strength
BS 903-A35:1995 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces
BS 903-A35:1985 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces

CZ-CSN

CSN ON 25 8012-1964 Thermometer and thermometer time constants
CSN 64 0768-1982 Determination of time - emperature limits

German Institute for Standardization

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018
DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN ISO 11357-6:2024-03 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024); German and English version prEN ISO 11357-6:2024 / Note: D...
DIN EN ISO 11357-6:2024 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024); German and English version prEN ISO 11357-6:2024
DIN EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DIN EN ISO 11357-5:2024-04 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO/DIS 11357-5:2024)
DIN EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008); German version EN ISO 11357-6:2013
DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998

KR-KS

KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 11357-6-2018(2023) Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-6-2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength

Korean Agency for Technology and Standards (KATS)

KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-6-2023 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-5-2020 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2011 Rubber－Temperature, humidities and times for conditioning and testing
KS C IEC 61224:2012 Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 11357-6:2003 Plastics &##8722; Differential scanning calorimetry(DSC)-Part 6:Determination of oxidation induction time
KS M ISO 11357-6:2013 Plastics ㅡ Differential scanning calorimetry (DSC) ㅡ Part 6: Determination of oxidation induction time

International Organization for Standardization (ISO)

ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 471:1977 Title missing - Legacy paper document
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
ISO 19935-1:2018 Plastics - Temperature modulated DSC - Part 1: General principles
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 11357-6:2002 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determiantion of oxidation induction time
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces

GSO

GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
OS GSO ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
OS GSO ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GSO ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
BH GSO ISO 3213:2016 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength
OS GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength
OS GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength

American Society for Testing and Materials (ASTM)

ASTM F1416-96 Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2014) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators

RU-GOST R

GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Association Francaise de Normalisation

NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF EN ISO 11357-5:2014 Plastics - Differential calorimetric analysis (DSC) - Part 5: determination of the characteristic temperatures and times of the reaction curve, the reaction enthalpy and the degree of transformation
NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF EN ISO 2578:1998 Plastics - Determination of time-temperature limits after exposure to prolonged action of heat
NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
NF ISO 28343:2010 Rubber mixing ingredients - Processing oils - Determination of glass transition temperature by DSC

ES-UNE

UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)

Danish Standards Foundation

DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength

Association of German Mechanical Engineers

VDI/VDE 3522-1987 Time response of contact thermometers
DVS 2201-1 Beiblatt 5-2006 Service life temperature time limits due to thermal ageing

VDI - Verein Deutscher Ingenieure

VDI/VDE 3522-1981 Zeitverhalten von Beruehrungsthermometern

Society of Automotive Engineers (SAE)

SAE AIR4279A-2012 Heat Up Time

IN-BIS

IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces

ESDU - Engineering Sciences Data Unit

ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.

European Committee for Standardization (CEN)

prEN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024)
EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities

Malaysia Standards

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

AENOR

UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)

Lithuanian Standards Office

LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability
IPC TR-465-2-1993 Effect of Steam Aging Time and Temperature on Solderability Test Results

PL-PKN

PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PN C89082-14-1986 Unsaturated polyester resins Methods of testing Determination of maximum temperatur? and the time of increase of temperatur? to maximum temperatur? during copolymerization at temperatur? 25 and 80°C

International Telecommunication Union (ITU)

ITU-R TF.536-2 FRENCH-2003 Time-scale notations Notations ?utiliser pour d閟igner les 閏helles de temps
ITU-R VOEU 99 FRENCH-2003 Time scale based on pulsar timing Time scale based on pulsar period

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.25C-1994 Glass Transition Temperature and Cure Factor by DSC
IPC TM-650 2.4.25D-2017 Glass Transition Temperature and Cure Factor by DSC
IPC TR-585 CD-2006 Time@ Temperature and Humidity Stress of Final Board Finish Solderability

API - American Petroleum Institute

API 4063 VOL I-1969 TIME-TEMPERATURE HISTORIES OF SPECIFIED FUEL SYSTEMS VOLUME I

ZA-SANS

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing

Standard Association of Australia （SAA）

AS 1683.20:2001 Methods of test for rubber - Standard temperatures, humidities and times for conditioing and testing

CH-SNV

VSM 18725.2-1965 Determination of time and temperature limits after long-term thermal exposure of plastics

HU-MSZT

MSZ KGST 893-1978 The definition of unsaturated polyester resin, the gel time of the resin is 298 degrees (25 ℃)