Oscilloscope phase difference measurement error analysis method

Oscilloscope phase difference measurement error analysis method, Total:92 items.

The international standard classification for "Oscilloscope phase difference measurement error analysis method" includes: Medical Sciences and health care facilities in general , On-board equipment and instruments , Aircraft and space vehicles in general , Ceramic products , Linear and angular measurements , Metalliferous minerals , Rolling bearings .

The Chinese standard classification for "Oscilloscope phase difference measurement error analysis method" includes: Sanitation in general , Spacecraft telemetering and remote sensing system , Basic standards and general methods , Daily use ceramics products , Basic standards and general methods , Iron ore , Rolling bearing , Fuel oil .

Group Standards of the People's Republic of China

T/QGCML 3187-2024 Intelligent oxygen gas detector indication error repeatability calculation and analysis software
T/MJM 001-2022 Measurement Method on EVM for microwave and millimeter-wave module

Military Standard of the People's Republic of China-General Armament Department

GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry

Professional Standard - Hygiene

WS/T 409-2013 Estimation of total analytical error for clinical laboratory methods
WS/T 409-2024 Evaluation of the total analytical error of clinical quantitative detection methods

未注明发布机构

ASTM RR-E37-1003 1983 E0928-Standard Test Method for Purity by Differential Scanning Calorimetry
ANSI/TIA/EIA-455-197-2000(2008) Differential Group Delay Measurement OfSingle-Mode Components and Devices by the Differential Phase Shift Method
DIN 51007 E:2018-10 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
ASTM RR-E37-1005 1984 E0967-Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
DIN 51007-2 E:2020-11 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-1:2024-08 Thermal analysis (TA) —— Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) —— Part 1: General Principles
ASTM RR-E37-1016 1995 E0928-Standard Test Method for Purity by Differential Scanning Calorimetry

Professional Standard - Aerospace

QJ 2670.3-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Switch Quantity
QJ 2670.5-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Speed Variable Quantity
QJ 2670.2-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Analog Quantity
QJ 1791-1989 A Method of Analyzing the Active Section Error Using the Free Section Data of Surface-to-Surface Missile
QJ 2670.1-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - General Provision
QJ 2670.4-1994 Telemetry Parameter Error Analysis and Precision Evaluation Method - Digital Quantity
QJ 3194-2004 The measurement method for roundness of large dimension

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5383.11-2005 Test methods of sensitivity and stability for pyrotechnic. Part 11: Test for stability and com[atibility. DTA and DSC method
GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method

Professional Standard - Education

JY/T 0589.5-2020 General rules of analytical methods for thermal analysisPart 5 :Simulateneous thermogravimetric-differential thermal analysisand thermogravimetric differential scanning calorimetry
JY/T 0589.3-2020 General rules of analytical methods for thermal analysisPart 3: Differential scanning calorimetry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 15814.3-1995 Reagent of fireworks and firecrackers - Thermal compatibility test - Method of DTA and DSC
GB/T 6730.43-1986 Methods for chemical analysis of iron ores--The oscilloscopic polarography method for the determination of zinc content
GB/T 32324-2015 Rolling Bearings - Methods for the Measurement and Assessment of Departure from Roundness and Waviness
GB/T 4698.19-1996 Sponge titanium, titanium and titanium alloys - Determination of molybdenum content-Thiocyanate differential spectrophotometric method
GB/T 7235-1987 Methods for the assessment of departure from roundness--Measurement of variations in radius

Professional Standard - Machinery

JB/T 6642-2004 Rolling bearing parts—Methods for the measurement and assessment of departure from roundness and waviness

Professional Standard - Ferrous Metallurgy

YB/T 144-2013 Measurement Method of the Error of Signal Amplitude for Ultrasonic Flaw Detectors
YB/T 143-1998 Measurement method of the error of signal amplitute for eddy current flaw detector
YB/T 4010-1991 Determination of Magnesium Oxide by Subtraction Method for Chemical Analysis of High Quality Magnesia
YB 4010-1991 Determination of Magnesium Oxide by Subtraction Method for Chemical Analysis of High Quality Magnesia
YB/T 144-1998 Measurement method of the error of signal amplitute for ultrasonic flaw detector
YB/T 143-2013 Measurement Method of the Error of Signal Amplitude for Eddy Current Flaw Detectors

Professional Standard - Petrochemical Industry

SH/T 0806-2008 Determination of aromatic hydrocarbon types in middle distillates-High performance liquid chromatography method with refractive index detection

Professional Standard - Electron

SJ/Z 3206.14-1989 General rules for error in spectrum chemical analysis and data processing in laboratories

Professional Standard - Petroleum

SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 0545-2012 Determination of Thermal Property Parameters of the Wax Precipitation in Crude Oil. Test Method by Differential Scanning Calorimetry

Professional Standard - Non-ferrous Metal

YS/T 281.13-1994 Cobalt - Determination of sulfur content - Oscillopolarographic method after distillation
YS/T 248.6-1985 Crude Lead Chemical Analysis Method Oscillopolarographic Determination of Copper Content

RU-GOST R

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST 24314-1980 Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions
GOST R 50730.4-1995 Microwave ferrite devices. Methods of measurement of phase shift at high power level

CU-NC

NC 90-00-17-1987 Metrological Assurance. Methods for Expressinq Measurement Errors and Ways for Representing the Results

SCC

AS 1580.601.2:1975 Paints and related materials - Methods of test, Method 601.2: Colour - Instrumental measurement of colour difference using the 'Colormaster' differential colorimeter
DIN 51007-2 E:2020 Draft Document - Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DANSK DS/EN ISO 8655-6:2002 Piston-operated volumetric apparatus – Part 6: Gravimetric methods for the determination of measurement error
DIN 51007 E:2018 Draft Document - Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007-1 E:2023 Draft Document - Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles
NS-EN ISO 8655-6:2002 Piston-operated volumetric apparatus — Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002)
AENOR UNE-EN ISO 8655-6:2003 Piston-actuated volumetric devices. Part 6: Gravimetric methods for determining measurement error. (ISO 8655-6:2002)
DIN 28060 Supplement 1:1986 Brick-lined vessels and apparatus; examples for test methods for tolerances

American Society for Testing and Materials (ASTM)

ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

IT-UNI

UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method

German Institute for Standardization

DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).

Korean Agency for Technology and Standards (KATS)

KS B ISO 8655-6:2006 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS B ISO 8655-6:2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS B 5325-2009 Proving methods for liquid flowmeters

International Organization for Standardization (ISO)

ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
ISO 8655-6:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1

North Atlantic Treaty Organization Standards Agency

STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS

Japanese Industrial Standards Committee (JISC)

JIS G 0321:1966 Product analysis and its tolerance for wrought steel

KR-KS

KS B ISO 8655-6-2017 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error

BSI

DIN 51007-1:2024 Thermal analysis (TA) - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General Principles

TIA - Telecommunications Industry Association

TIA/EIA-455-197-2000 FOTP-197 Differential Group Delay Measurement of Single-Mode Components and Devices by the Differential Phase Shift Method

European Committee for Electrotechnical Standardization（CENELEC）

EN 61580-3:1997 Methods of Measurement for Waveguides Part 3: Variation of Group Delay

AGMA - American Gear Manufacturers Association

2009-B01-2001 Bevel Gear Classification@ Tolerances@ and Measuring Methods (Errata: 2008)

YU-JUS

JUS N.N6.190-1984 Radiocommunications. Cabled distribution and CA TV systems. Methods of measurements. Differential phase

Association Francaise de Normalisation

NF E10-108:2000 Dimensional measuring methods - Part 9 : positioning deviation.
NF B35-655-6*NF EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6 : gravimetric methods for the determination of measurement error

NATO - North Atlantic Treaty Organization

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

SE-SIS

SIS SS-ISO 4463:1983 Measurement methods for building - Setting out and measurement - Permis- sible measuring deviations

European Committee for Standardization (CEN)

EN ISO 8655-6:2002 Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error
EN ISO 8655-6:2022 Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022, Corrected version 2022-06)

Danish Standards Foundation

DS/EN ISO 8655-6/AC:2009 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
DS/EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
DS/ISO 4291:1990 Methods for the assessment of departure from roundness — Measurement of variations in radius
DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods

ZA-SANS

SANS 216-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements

GSO

GSO ISO 8655-6:2009 Piston-operated volumetric apparatus - Part 6 : Gravimetric methods for the determination of measurement error

IN-BIS

IS 6062-1971 Method of measuring open channel water flow using standing wave flume drop

Others: