ink execution

ink execution, Total:323 items.

The international standard classification for "ink execution" includes: Inks. Printing inks , Transport in general , Photographic paper, films and cartridges , Products of the chemical industry in general , Power stations in general , Office machines .

The Chinese standard classification for "ink execution" includes: Printing Technology , Office supplies and office implements , Culture, education and drawing instruments, notebooks and cards , Actuator , Basic standards and general methods , Basic standards and general methods for photosensitive material , Dye , Pigment .

Professional Standard - Energy

NB/T 11324-2023 Preparation Guidelines for Execution Budgetary Estimate of Hydropower Projects

Professional Standard - Light Industry

QB/T 4580-2013 Ultraviolet curing ink for ink jet printing
QB/T 5788-2022 Heating actuators
QB/T 5919-2023 Plastic pipe cutter
QB/T 1745.1-2011 Fountain pen inks—Part1:Non-pigmentinks
QB/T 4168-2011 Inks for microporous nib pen
QB/T 4431-2012 Inks for paint marker
QB/T 2730.2-2013 Water based ink for large format ink jet printing
QB/T 2730.2-2005 Ink for ink jet printing -- Part 2: Ink large format jet printer
QB/T 2063-2007 Carbonic ink
QB/T 4434-2012 Gel inks
QB/T 4429-2012 Inks for soft nib pen
QB/T 2063-1994 Carbonic Ink
QB/T 4974-2016 Specification for the water based dyes compatible to inkjet
QB/T 4169-2023 Marking pen inks
QB/T 1745.1-2023 Fountain pen inks - Part1:Non-pigment inks
QB/T 5194-2017 Waterless offset ink
QB/T 2730.1-2013 Ink for ink jet printer
QB/T 1655-1992 Ink Pen
QB/T 4579-2013 Ink for ink jet coding
QB/T 4430-2012 Inks for roller ball pen
QB/T 1745.2-2018 Fountain pen inks-Part 2:Carbonic inks
QB/T 1745-1993 Fountain Pen Inks
QB/T 2730.1-2005 Ink for ink jet printing -- Part 1: Ink for desk jet printer

Professional Standard - Machinery

JB/T 8218-1999 Terms for final controlling element

Group Standards of the People's Republic of China

T/CWIA 1014-2022 Cartridges
T/QGCML 3259-2024 electrothermal actuator
T/CASME 18-2022 Pneumatic actuator for valves
T/CBCSA 16-2016 Solvent based jet-printing ink for ceramics
T/ZZB 2436-2021 Water-base pigment dispersions for gel ink
T/CWIA 1008-2020 Technical specifications for matching evaluation between ball pen tip and emulsion ink
T/CAGDE 217-2022 Water-based flexographic ink
T/ZZB 0400-2018 Roller ball pens and refills
T/ZZB 2639-2022 Ink cartridge
T/QGCML 3296-2024 Intelligent valve control actuator
T/ZZB 3134-2023 Linear stroke actuator with pre-charged air pressure as spring
T/ZZB 2084-2021 Linear electric actuator
T/LNJL 001-2024 Liquor And Spirits Circulation Industry Executive Standard Of Management
T/NXJX 038-2022 Electric servo linear actuator

Professional Standard - Traffic

JT 410-1999 Symbol of execute law for administrative executive of communications

Professional Standard - Chemical Industry

HG/T 4579-2014 Inkjet printing for CTP plate
HG/T 2993-2004 Acid ink blue
HG/T 2993-1982(1997) Acid ink blue
HG/T 4129-2010 Photographic grade inkjet printing ink
HG/T 2993-1982 Acid ink blue

Zhejiang Provincial Standard of the People's Republic of China

DB3308/T 071-2020 Administrative Law Enforcement Work Specifications

工业和信息化部

SJ/T 11666.9-2016 Manufacturing Execution System (MES) Specification Part 9: Manufacturing Execution System Software Functions for the Machining Industry
SJ/T 11666.14-2016 Specification of manufacturing execution systems（MES）-Part 14:Software function of manufacturing executive system for rubber products industry
QB/T 5489-2020 Storage stability test methods for inkjet ink
SJ/T 11666.15-2016 Specifications of manufacturing executive systems（MES）-Part 15:Software function of manufacturing executive system for chemical industry
SJ/T 11666.13-2016 Specifications of manufacturing execution system（MES）-Part 13:Software function of manufacturing execution systemfor paper-making industry
JB/T 13883-2020 Electro-hydraulic actuator for valve
QB/T 5604-2021 LED-UV curing legend inkjet printing ink for printed circuit board
SJ/T 11666.12-2016 Specifications of manufacturing execution system （MES）-Part 12:Software functions of manufacturing execution system for shipbuilding industry
SJ/T 11666.10-2016 Manufacturing Execution System (MES) Specification Part 10: Manufacturing Execution System Software Functions for the Petrochemical Industry
SJ/T 11666.11-2016 Manufacturing Execution System (MES) Specification Part 11: Manufacturing Execution System Software Functions for the Metallurgical Industry

Shandong Provincial Standard of the People's Republic of China

DB3716/T 60-2023 Administrative Law Enforcement Publicity Standards
DB3704/T 009-2021 Publicity Specifications for Administrative Law Enforcement

Hebei Provincial Standard of the People's Republic of China

DB1301/T 520-2024 Code of Conduct for Market Supervision and Administrative Law Enforcement

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28270-2012(英文版) Intelligent valve electric actuator
GB 2962-1982 Acid ink blue

Jiangsu Provincial Standard of the People's Republic of China

DB3205/T 1059-2023 Operational Specifications for Grassroots Comprehensive Administrative Law Enforcement Institutions

Professional Standard - Electricity

DL/T 641-2005 Electric valve actuators for power plant
DL/T 641-2015 Electric Valve Actuators for Power Plant
DL/T 642-2016 Explosion proof electric actuator

Professional Standard - Commodity Inspection

SN/T 1914-2007 Rule of the inspection of ink for ink jet printing for import and export

Taiwan Provincial Standard of the People's Republic of China

CNS 2636-1966 Red Ink (for Writing)

BE-NBN

NBN I-890-1968 Sewage pipe network. Enforce and protect

American Association

ASSE 1010-2004 Performance Requirements for Water Hammer Arresters
ASSE 1070-2004 Performance Requirements for Water Temperature Limiting Devices
ASSE 1043-1992 Performance Standard for Cast Iron Sovent Sanitary Drainage Systems
ASSE 1018-2001 Performance Requirements for Trap Seal Primer Valves - Potable Water Supplied
ASSE 1050-2002 Performance Requirements for Stack Air Admittance Valves for Sanitary Drainage Systems
ASSE 1023-1979 Performance Requirements for Hot Water Dispensers Household Storage Type - Electrical
ASSE 1044-2001 Performance Requirements for Trap Seal Primer Devices - Drainage Types and Electronic Design Types
ASSE 1051-2002 Performance Requirements for Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems
ASSE 1079-2005 Performance Requirements for Dielectric Pipe Unions
ASSE 1007-1986 Performance Requirements for Home Laundry Equipment
ASSE 1006-1986 Performance Requirements for Residential Use Dishwashers
ASSE 1055-1997 Performance Requirements for Chemical Dispensing Systems

Standard Association of Australia （SAA）

AS 8700:2011 Execution of prefabricated vertical gutters
AS 4700.1:1998 Implementation of Health Level Seven (HL7) Version 2.3 - Patient administration
AS 4700.2:1998 Implementation of Health Level Seven (HL7) Version 2.3 - Pathology orders and results
AS 4700.1:1997 Implementation of Health Level Seven (HL7) Version 2.2 - Admission, discharge and transfer

CZ-CSN

CSN 73 2027-1955 Cement construction. Specific implementation of cement construction
CSN ON 73 6850-1962 Implementation
CSN 90 4145-1981 Inks
CSN 73 2810 ZZ1-2000 Wooden buildings. implement
CSN 90 4140-1953 blue black ink
CSN 90 4410-1985 Reproduction inks
CSN ON 12 6050-1963 Passage and execution of dryers
CSN 72 5762-1958 Ceramic Bead Isolation (Level 2 Execution)

SCC

VDI/VDE 3844:2014 Actuators for flowing materials — Actuators for operating actuators
DIN 19752:2019 Hydropower plants - Planning, execution and operation
VDI/VDE 3847 BLATT 1:2013 Actuators for flowing materials — Interface between actuator and positioner — Actuators with lifting drive
VDI/VDE 3845 BLATT 1:2010 Actuators for flowing materials — Pneumatic rotary actuators — Connection points between actuator and actuator accessories
DIN 19752 E:2018 Draft Document - Hydropower plants - Planning, execution and operation
AWWA JAW36127 Journal AWWA — Privatizing the Mexican Water Industry
VDI 6024 BLATT 1-2008 Saving water in drinking water installations — requirements for planning, execution, operation and maintenance
CEI UNEL 47158:1964 Id. -- Built-in version - n. 6 tables
VDI/VDE 3845 BLATT 2:2011 Actuators for flowing materials — Pneumatic rotary actuators — Marking
IEC PAS 62201:2000 A procedure for executing SWEAT
VDI/VDE 3847 BLATT 2:2016 Actuators for flowing materials — Interface between actuator and positioner — Actuators with rotary actuator
CAN/CGSB 187.2-1999 Gestion de rendement de projet
MIL MIL-PRF-85046A-2015 Actuator, Linear, Electromechanical
ISO/DIS 14617-4:1997 Graphical Symbols for Diagrams - Part 4: Actuators & Related Devices
MIL MIL-A-85116-1980 ACTUATOR, PISTON, MINIATURE
VDI 5600 BLATT 1-2007 Manufacturing management systems
NS 3458:2004 Compaction - Requirements and execution
MIL MIL-A-85046-1976 ACTUATOR, LINEAR, ELECTROMECHANICAL
AENOR UNE 1061:1960 Practical execution of microfilm.
MIL MIL-A-23282B-1965 ACTUATOR (SUPERSEDING MIL-A-23282A)
HOLDEN HN 1403-2009 MARKING INK
CEI UNEL 47159:1964 Id. -- Mobile execution (steering wheel) - n. 4 tables
DIN 18535-1 E:2015 Draft Document - Waterproofing of tanks and pools - Part 1: Requirements and principles for design and execution
AWWA DSS65651 Serial Redundancy Support for Intelligent Actuators
DANSK DS/EN 15714-2:2009 Industrial valves – Actuators – Part 2: Electric actuators for industrial valves – Basic requirements
DIN 18195-7 E:2008 Draft Document - Water-proofing of buildings - Water-proofing against pressing water from the inside - Part 7: Dimensioning and execution
VDI/DVGW 6023-2013 Hygiene in drinking water installations — requirements for planning, execution, operation and maintenance
MIL MIL-A-82950-1995 ACTUATOR, BELLOWS ATU-117/P
AWWA DSS90008 Executive Summary Lead Control Strategies American Water Works Association Research Foundation
NS-EN 15714-2:2009 Industrial valves — Actuators — Part 2: Electric actuators for industrial valves — Basic requirements
MIL MIL-A-60657-1967 ACTUATOR, ROTARY 1000-39 ASSEMBLY
HOLDEN HN 1055-2001 Ink Ber Walnut
AENOR UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
VDI 6023 BLATT 1-2006 Hygiene in drinking water installations — requirements for planning, execution, operation and maintenance
AWWA ACE95180 The Executive Partnership for Environmental Resources Training: Bridging Human and Water Resources
AWWA IMTECH62890 Effective Execution of IT Master Plans
MIL MIL-A-14897-1969 ACTUATOR, ROTARY 1000-34 ASSEMBLY
BS EN 60447:1994 Man-machine interface (MMI). Actuating principles
DANSK DS/EN 12715:2020 Execution of special geotechnical work – Grouting
DIN EN 15714-2 E:2008 Draft Document - Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements; German version prEN 15714-2:2007
DANSK DS/EN 15714-6:2022 Industrial valves – Actuators – Part 6: Hydraulic linear actuators for industrial valves – Basic requirements
AENOR UNE-EN 12715:2021 Execution of special geotechnical work - Grouting
DIN EN 15714-6:2023 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements; German version EN 15714-6:2022
DANSK DS/EN 15714-5:2022 Industrial valves – Actuators – Part 5: Pneumatic linear actuators for industrial valves – Basic requirements

German Institute for Standardization

DIN 19752:2019-02 Hydropower plants - Planning, execution and operation
DIN 19752 E:2018-01 Hydropower plants - Planning, execution and operation
DIN EN 15237:2007 Execution of special geotechnical works - Vertical drainage;English version of DIN EN 15237:2007-06
DIN 53803-2:1994-03 Sampling; practical execution
DIN 53803-2:1979 Sampling; practical execution
DIN 53803-2 E:1990-11 Sampling; practical execution
DIN 18900:1982-10 Wooden pole constructions; design and execution
DIN EN 12715:2021-01 Execution of special geotechnical work - Grouting; German version EN 12715:2020
DIN EN 14490:2010-11 Execution of special geotechnical works - Soil nailing; German version EN 14490:2010
DIN EN 15714-5:2022 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
DIN EN 15714-5:2021 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German and English version prEN 15714-5:2021
DIN 18534-1:2024-03 Waterproofing for indoor applications - Part 1: Requirements and principles for design and execution / Note: Date of issue 2024-01-26*Applies in conjunction with DIN 18534-2 (2024-03), DIN 18534-3 (2024-03), DIN 18534-4 (2024-03), DIN 18534-5 (2024-03)...
DIN EN 15714-5:2022-10 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German version EN 15714-5:2022
DIN EN 15714-6:2023-03 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements; German version EN 15714-6:2022
DIN EN 15714-5:2019 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German and English version prEN 15714-5:2019
DIN 18532-1:2017 Waterproofing of concrete areas trafficable by vehicles - Part 1: Requirements and principles for design and execution

PL-PKN

PN G60005-1973 Safety dams Principles of designing and executing
PN P55036-1972 Correction signs and execu?iono? correction
PN BN 8541-09-1964 rubber stamp ink

VDI - Verein Deutscher Ingenieure

VDI/VDE 3844-2012 Industrial process control valves - Actuators for control valves
VDI/VDE 3845 Blatt 2-2010 Industrial process control valves - Pneumatic part-turn actuators - Labelling
VDI/VDE 3847 Blatt 2-2003 Industrial process control valves - Interface between valve and positioner - Control valves with rotary actuator
VDI 5600 BLATT 1-2015 Fertigungsmanagementsysteme (Manufacturing Execution Systems - MES)
VDI/VDE 3847 Blatt 1-2001 Industrial process control valves - Interface between valve and positioner

US-FCR

FCR 40 CFR PART 142-2013 NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION
FCR 40 CFR PART 142-2014 NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION
FCR 47 CFR PART 201-2013 EXECUTIVE POLICY
FCR 21 CFR PART 7-2013 ENFORCEMENT POLICY
FCR 21 CFR PART 7-2015 ENFORCEMENT POLICY
FCR 47 CFR PART 201-2014 EXECUTIVE POLICY
FCR 21 CFR PART 1-2015 GENERAL ENFORCEMENT REGULATIONS
FCR 21 CFR PART 1-2014 GENERAL ENFORCEMENT REGULATIONS
FCR 21 CFR PART 1-2013 GENERAL ENFORCEMENT REGULATIONS
FCR COE ER 350-1-415-1985 EXECUTIVE AND MANAGEMENT DEVELOPMENT
FCR 40 CFR PART 168-2015 STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS
FCR 40 CFR PART 168-2013 STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS
FCR DOD 4161.2-M-1991 DOD MANUAL FOR THE PERFORMANCE OF CONTRACT PROPERTY ADMINISTRATION

Association Francaise de Normalisation

NF P94-337*NF EN 15237:2007 Execution of special geotechnical works - Vertical drainage.
NF EN 15714-5:2022 Industrial valves - Actuators - Part 5: Pneumatic linear actuators - Basic requirements
NF EN 15714-6:2022 Industrial valves - Actuators - Part 6: hydraulic linear actuators - Basic requirements
FD CEN/TR 16239:2011 Règles d'exécution des ouvrages en staff

GB-REG

REG 40 CFR PART 142-2011 NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION
REG 47 CFR PART 201-2011 EXECUTIVE POLICY
REG 36 CFR PART 1231-2011 TRANSFER OF RECORDS FROM THE CUSTODY OF ONE EXECUTIVE AGENCY TO ANOTHER
REG 40 CFR PART 168-2011 STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS
REG 23 CFR PART 669-2011 ENFORCEMENT OF HEAVY VEHICLE USE TAX

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 142-2010 NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION
EPA 40 CFR PART 168-2010 STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS

Aeronautical Radio Inc.

ARINC 651-1 ITEM 12.0-1997 Executive Summary
ARINC 751 ITEM 4.0-1994 Performance Requirements
ARINC 651-1 ITEM 12.0 Executive Summary
ARINC 634 ITEM 1.0-1996 Introduction and Executive Summary
ARINC 634 ITEM 1.0 Introduction and Executive Summary

US-FCC

FCC 47 CFR PART 201-2010 EXECUTIVE POLICY

IX-ICAO

ICAO 9835-2004 Manual on the Implementation of ICAO Language Proficiency Requirements First Edition

RU-GOST R

GOST R 51872-2002 Executive geodetic documentation in construction. Performance rules
GOST 17039-1971 Taps. Required dimensions
GOST 21.601-2011 System of design documents for construction. Rules for execution of working documents of internal water and sewerage systems
GOST 21.616-1988 System of design documentation for construction. Drawings for hydro-land-reclamation linear structures. Rules of execution

Building Officials and Code Administrators International(U.S.)

BOCA IECC-1998 CHAPTER 1-1998 Administration and Enforcement

Association of German Mechanical Engineers

VDI/VDE 3844 Blatt 1-1993 Actuators for control valves; characteristic data of pneumatic actuators
VDI/VDE 3844 Blatt 2-1993 Actuators for control valves; characteristic data of electrohydraulic actuators
VDI 5600 Blatt 1-2016 Manufacturing execution systems (MES)
VDI 6023 Blatt 1-2022 Hygiene in drinking-water supply systems Requirements for planning, execution, operation, and maintenance

GOSTR

GOST R 51872-2019 Executive geodetic documentation. Performance rules

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP119A-2003 A Procedure for Performing SWEAT

International Code Council

ICC IECC-1998 CHAPTER 1-1998 Administration and Enforcement

American Society for Testing and Materials (ASTM)

ASTM D5851-95(2011) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM D5851-95(2006) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM D5851-95(2015) Standard Guide for Planning and Implementing a Water Monitoring Program

International Organization for Standardization (ISO)

ISO 13289:2011 Recreational diving services - Requirements for the conduct of snorkelling excursions

Korean Agency for Technology and Standards (KATS)

KS G 2305-1994 Fabric-Inked ribbons for line printer
KS G 2301-1978 Writing inks
KS G 2301-2021 Writing inks
KS G 2301-2001(2016) Writing inks
KS G 2303-1994 Stamp and ink
KS G 2301-2001 Writing inks
KS A ISO 9355-3-2021 Ergonomic requirements for the design of displays and control actuators－Part 3：Control actuators
KS C IEC 61310-3:2019 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators
KS M 5953-2006 DUPLICATING INK BLACK
KS G 2305-2003 Fabric inked ribbons for line printer

National Aeronautics and Space Administration (NASA)

NASA NPR 9470.1-2008 Budget Execution
NASA NPG 9501.3-2002 EARNED VALUE MANAGEMENT IMPLEMENTATION ON NASA CONTRACTS

International Telecommunication Union (ITU)

ITU-T D.7-1992 "Concept and Implementation of""One-Stop Shopping"" for International Private Leased Telecommunication Circuits Study Group III"
ITU-T SERIES J SUPP 3-1998 "Guidelines for the Implementation of Recommendation J.111""Network Independent Protocols"" Example of Digital Video Broadcasting (DVB) Systems for Interactive Services - Series J: Transmission of Television Sound Programme and Other Multimedia Signals St

US-DOT

DOT 49 CFR PART 453-2010 CONTROL AND ENFORCEMENT
DOT 49 CFR PART 1021-2010 ADMINISTRATIVE COLLECTION OF ENFORCEMENT CLAIMS
DOT 49 CFR PART 1105-2010 PROCEDURES FOR IMPLEMENTATION OF ENVIRONMENTAL LAWS
DOT 49 CFR PART 554-2010 STANDARDS ENFORCEMENT AND DEFECTS INVESTIGATION
DOT 23 CFR PT 669-2010 ENFORCEMENT OF HEAVY VEHICLE USE TAX

NATO - North Atlantic Treaty Organization

STANAG 1132-2000 Mine Countermeasures Tactics and Execution - ATP-24(B) Volume 1 (ED 18)
STANAG 1132-2002 Mine Countermeasures Tactics and Execution - ATP-24(C) Volume 1 (ED 20)
STANAG 1132-1997 Mine Countermeasures Tactics and Execution - ATP-24(B) Volume I (ED 16)
STANAG 1132-1999 Mine Countermeasures Tactics and Execution - ATP-24(B) Volume 1 (ED 17)
STANAG 1132-2006 NAVAL MINE COUNTERMEASURES TACTICS AND EXECUTION - ATP-24(C) VOLUME I (ED 21)
STANAG 1132-1995 Mine Counter-Measures Tactics and Execution - ATP-24(B) Volume I (ED 15 AMD 0)
STANAG 1132-1991 Tactical Instructions and Procedures for the Conduct of Minewarfare Operations - AIP-24(A) (ED 13 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0

Society of Automotive Engineers (SAE)

SAE J2057/2-2001 Class A Multiplexing Actuators
SAE J2057/2-2022 Class A Multiplexing Actuators
SAE J2057/2-2006 Class A Multiplexing Actuators
SAE J1817-2012 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2001 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2023 Long-Stroke Air-Brake Actuator Marking
SAE ARP5754-2019 Electromechanical Actuators Specification Guide
SAE J2057-2-2006 Class A Multiplexing Actuators

CN-STDBOOK

图书 A-4587 Introduction to Administrative Law Enforcement

AASHTO - American Association of State Highway and Transportation Officials

CAES-4-2015 CIA 2013. Executive Summary

GSO

GSO 2249:2012 Record inks - Specification for permanent inks
GSO 2243:2012 Record inks - Specification for blue-black inks
GSO 2247:2012 Record inks - Specification for blue-black inks - Test methods
GSO 2245:2012 Record inks - Specification for permanent inks - Test methods
GSO IEC 60636:2014 Flexible waveguide assembly performance
GSO EN 15714-5:2024 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
BH GSO ISO 9355-3:2017 Ergonomic requirements for the design of displays and control actuators -- Part 3: Control actuators
OS GSO ISO 9355-3:2016 Ergonomic requirements for the design of displays and control actuators -- Part 3: Control actuators

SAE - SAE International

SAE J2057-2-2001 Class A Multiplexing Actuators
SAE J1817-1991 Long Stroke Air Brake Actuator Marking@ Recommended Practice
SAE J1817-2018 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2016 Long-Stroke Air-Brake Actuator Marking
SAE J1817-1998 Long-Stroke Air-Brake Actuator Marking
SAE J1155-1988 DISPLACEMENT OF PNEUMATIC SERVICE BRAKE ACTUATORS
SAE AIR4066C-2017 Hydraulic Servoactuator Materials
SAE AIR4066-1987 Hydraulic Servoactuator Materials
SAE AIR4066A-1997 Hydraulic Servoactuator Materials
SAE AIR4066B-2007 Hydraulic Servoactuator Materials
SAE J1155-1976 Displacement of Pneumatic Brake Actuators

PK-PSQCA

PS 87-1960 PAKISTAN STANDARD SPECIFICATION FOR INK POWDERS AND TABLETS BLUE-BLACK AND RED
PS 404-1964 Ink, Drawing, Waterproof-Black.

The American Road & Transportation Builders Association

AASHTO CAES-4-2015 CIA 2013. Executive Summary

US-CFR-file

CFR 29-1952.314-2014 Labor. Part1952:Approved state plans for enforcement of state standards. Section1952.314:Level of Federal enforcement.
CFR 15-766.3-2014 Commerce and foreign trade. Part766:Administrative enforcement proceedings. Section766.3:Institution of administrative enforcement proceedings.
CFR 15-766.3-2013 Commerce and foreign trade. Part766:Administrative enforcement proceedings. Section766.3:Institution of administrative enforcement proceedings.

ISA - International Society of Automation

ISA REAL-TIME EXECUT-2009 Real-Time Execution for IEC 61499

US-COE

COE ER 27-2-2-1996 PROCEDURES FOR IMPLEMENTATION AND ENFORCEMENT OF THE RULES OF PROFESSIONAL CONDUCT FOR ATTORNEYS

NO-SN

NS 3458-2004 Compaction Requirements and execution

North Atlantic Treaty Organization Standards Agency

STANAG 1132-2007 NAVAL MINE COUNTER-MEASURES TACTICS AND EXECUTION - ATP-24(C) VOL I

PT-IPQ

NP EN 1148-2000 Heat exchangers Water to water heat exchangers for district heating Test procedures for establishing the performance data
NP EN 752-2-2000 Drain and sewers systems outside buildings Part 2:Performance requirements

American Industrial Hygiene Association （AIHA)

ASSE 1003-2001 Performance Requirements for Water Pressure Reducing Valves Errata 1/3/2003

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE NA-04-8-1-2004 Evaluation of Moisture Buffer Effects by Performing Whole-Building Simulations

(U.S.) Ford Automotive Standards

FORD ESE-M99P12-A-1978 INK, MARKING
FORD ESE-M99P12-A2-1984 INK, MARKING

British Standards Institution (BSI)

BS 3484-2:1994 Record inks - Specification for permanent inks
BS EN 15714-5:2022 Industrial valves. Actuators - Pneumatic linear actuators for industrial valves. Basic requirements
BS EN 15714-6:2022 Industrial valves. Actuators - Hydraulic linear actuators for industrial valves. Basic requirements
BS 3484-1:1991 Specification for blue-black inks
BS EN ISO 22475-1:2021 Geotechnical investigation and testing. Sampling methods and groundwater measurements. Technical principles for the sampling of soil, rock and groundwater
BS 3484-1:1992 Record inks. Specification for blue-black inks

HU-MSZT

MSZ 20504-1961 blue ink
MNOSZ 20505-1955 tannin ink
MNOSZ 20520-1955 Ink inspection

American National Standards Institute （ANSI)

ANSI/ASABE S612-2009 Performing On-farm Energy Audits
ANSI/AIHA Z9.11-2008 Laboratory Decommissioning Standard

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4024.1903:2014 Machinery Safety Displays, Controls, Actuators and Signals Ergonomic Requirements for Display and Control Actuator Design Control Actuators

SE-SIS

SIS SMS 2475-1967 Transmission pulleys. Execution. Balancing
SIS SS IEC 447:1981 Electrical actuators - Directions of movement
SIS SS 1902-1987 Technical drawings-General require- ments for execution

US-GSA

GSA A-A-3155-1997 COAT RACK, WALL MOUNTED, WOOD, EXECUTIVE TYPE
GSA AA-C-300 A-1953 CHAIRS, WOOD, EXECUTIVE OFFICE, TRADITIONAL
GSA TT-I-563 F-1975 INK, WRITING FOR FOUNTAIN AND DIP PENS

IEC - International Electrotechnical Commission

PAS 62201-2000 A Procedure for Executing SWEAT (Edition 1.0)

Lithuanian Standards Office

LST EN 15714-2-2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
LST EN 14490-2010 Execution of special geotechnical works - Soil nailing
LST EN 1537-2001 Execution of special geotechnical work - Ground anchors
LST EN 1537-2001/AC-2006 Execution of special geotechnical work - Ground anchors
LST EN 12715-2003 Execution of special geotechnical work - Grouting
LST EN 12715-2021 Execution of special geotechnical work - Grouting

United States Navy

NAVY MS16835-1958 INKING PADS AND INKING PAD REFILLS, RUBBER STAMP
NAVY MS16783-1958 INKS, STAMP PAD

US-Unspecified Preparing Activity

DI-MISC-81064-1990 SUPPORT HARDWARE IMPLEMENTATION PLAN
DI-MGMT-81926-2013 FIELD CHANGE EXECUTION DATA PACKAGE

Danish Standards Foundation

DS/EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
DS/EN 14490:2010 Execution of special geotechnical works - Soil nailing
DS/EN 12715:2000 Execution of special geotechnical works - Grouting

Spanish Association for Standardization (UNE)

UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
UNE-EN 1537:2001 EXECUTION OF SPECIAL GEOTECHNICAL WORK - GROUND ANCHORS.
UNE-EN 14490:2013 Execution of special geotechnical works - Soil nailing
UNE-EN 12715:2021 Execution of special geotechnical work - Grouting
UNE-EN 15714-6:2023 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
UNE-EN 15714-5:2023 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements

AT-ON

OENORM H 5411-2021 Sanitary appliances - Designing and execution
OENORM EN 15714-6-2021 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements

KR-KS

KS C IEC 61310-3-2019 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 250-2001 Performance and Calibration of Reference Sound Sources

IT-UNI

UNI EN 12715-2021 Execution of special geotechnical work - Grouting

IN-BIS

IS 11259-1985 Ink specification number
IS 12532-1988 Felt pen ink specifications