Are there any standards for measuring the temperature of parts?

Are there any standards for measuring the temperature of parts?, Total:387 items.

The international standard classification for "Are there any standards for measuring the temperature of parts?" includes: Volumetric equipment and measurements , Measuring instruments , Incandescent lamps , Linear and angular measurements , Heat. Calorimetry , Rolling bearings , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "Are there any standards for measuring the temperature of parts?" includes: Oil and gas gathering and transportation equipment , Basic standards and general methods , Electric lighting in general , Thermal Measurement , Length Measurement , Rolling bearing , Orthopedic devices .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20152-2006 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
GB/T 24635.3-2009 Geometrical Product Specifications (GPS)—Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement—Part 3:Use of calibrated workpieces or standards
GB/T 17290-1998 Petroleum measurement systems--Calibration--Temperature corrections for use with volumetric reference measuring systems

National Metrological Technical Specifications of the People's Republic of China

JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
JJF 1113-2004 Calibration Specification of Angle Measuring Instrument for Bearing Ring
JJF 1855-2020 Metrological Technical Specification for Purity Assessment of Certified Reference Materials—Organic Purity Certified Reference Materials
JJF 1107-2003 Calibration Specification of Infrared Thermometers for Measurement of Human Temperature

National Metrological Verification Regulations of the People's Republic of China

JJG 783-1992 Sine inspecting Instrument
JJG 110-1979 Verification Regulation of Standard Temperature Lamp
JJG 161-1994 Verification Regulation of Standard Mercury-in-Glass Thermometer(Grade I)
JJG 160-2007 Verification Regulation of Standard Platinum Resistance Thermometer
JJG 160-1992 Verification Regulation of Standard Platinum Resistance Thermometer
JJG 859-1994 Verification Regulation of the Standard long-Stem Platinum Resistance Thermometer
JJG 161-2010 Standard Mercury-in-Glass Thermometers
JJG 858-2013 Standard Rhodium-iron Resistance Thermometers
JJG 858-1994 Standard Rhodium-Iron Resistance Thermometer
JJG 350-1994 Verification Regulation of Standard Capsule Platinum Resistance Thermometer

工业和信息化部

JB/T 14680-2022 Determination of effective depth of induction hardening of sintered ferrous components

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3410-1998 Calibration procedures for high-accuracy roundness and cylindricity measurement standard devices

Professional Standard - Machinery

JB/T 7051-2006 Rolling bearing parts-Methods for the measurement and assessment of surface roughness
JB/T 7051-1993 Measuring and evaluating method of surface roughness of rolling bearing parts
JB/T 6642-2004 Rolling bearing parts—Methods for the measurement and assessment of departure from roundness and waviness

未注明发布机构

ASTM RR-D02-1862 2017 D8126-Standard Test Method For Organic Basicity Determination by Potentiometric Hydrochloric Acid Titration
ASTM RR-F02-1002 1984 F0874-Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
ANSI C78.682-1997(2016) Electric Lamps — Standard Method of Measuring the Pinch Temperature ofQuartz Tungsten-Halogen Lamps

Professional Standard - Medicine

YY/T 0641-2008 Standard test method for transformation temperature of nickel—Titanium alloys by thermal analysis

Professional Standard - Light Industry

QB/T 3736-1999 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

SCC

AENOR UNE 4008:1961 REFERENCE TEMPERATURE FOR MEASURING TOOLS AND PARTS IN GENERAL
ASHRAE 41.1-2024 Standard 41.1-2024 -- Standard Methods for Temperature Measurement (ANSI Approved)
VDI/VDE 3511 BLATT 4.3-2005 Technical temperature measurements — Radiation thermometry — Standard test methods for radiation thermometers with a wavelength range
IEC PAS 62204:2000 Standard method for measuring and using the temperature coefficient of resistance to determine the temperature of a metallization line
ASHRAE 41.1-2020 Standard 41.1-2020 – Standard Methods for Temperature Measurement (ANSI Approved)
VDI/VDE 3511 BLATT 4.4-2005 Technical temperature measurement — Radiation thermometry — Calibration of radiation thermometers
BS DD CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement-Use of calibrated workpieces or standards
VDI/VDE 3511 BLATT 4.4-2005 Technical temperature measurement — Radiation thermometry — Calibration of radiation thermometers
DANSK DS/EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
VDI/VDE 3511 BLATT 4.3-2005 Technical temperature measurements — Radiation thermometry — Standard test methods for radiation thermometers with a wavelength range
CEI EN 60682:1998 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
VDI/VDE 3512 BLATT 2-2017 Temperature measurement for building automation — temperature sensors, temperature probes and their measurement parameters
IEC 60360:1987/AMD2:1996 Amendment 2 - Standard method of measurement of lamp cap temperature rise
VDI/VDE 2660 BLATT 2-2020 Technical temperature measurement - Optical temperature sensor based on fiber Bragg gratings - Recommendations for carrying out temperature measurements and specifying the measurement uncertainty
IEC 60360:1987/AMD1:1993 Amendment 1 - Standard method of measurement of lamp cap temperature rise
AENOR UNE 7024:1950 QUANTITATIVE DETERMINATION OF TIN IN ALUMINUM PARTS AND ITS ALLOYS
IEC 60360:1971/AMD1:1979 Amendment 1 - Standard method of measurement of lamp cap temperature rise
AASHTO M 339M/M 339-2022 Standard Specification for Thermometers Used in the Testing of Construction Materials
NS-EN ISO 15530-3:2011 Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
BS 5371:1976 Specification for standard method of measurement of lamp cap temperature rise
ASTM D2557-99(2010)e1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55 degrees C (-450 to -67 degrees F)
AASHTO PP 97-2019(2023) Standard Practice for Determination of Constant Mass

ES-AENOR

UNE 4 008 General reference temperatures for measuring instruments and parts
UNE 53-611-1985 Determination of compression relaxation of elastomers under different standardized temperatures and heating conditions

American Society for Testing and Materials (ASTM)

ASTM B934-21 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM E1112-00(2006) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM E1112-00(2011) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM A965/A965M-21a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-02e1 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-14(2019) Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-10 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-13 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM D6176-97(2003) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM A965/A965M-14 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-21 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A965/A965M-00 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A336/A336M-18 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM E1965-98(2023) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2016) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM C1046-95(2001) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM C1046-95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM E1965-98 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2003) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D6176-97(2008) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D6176-97(2022) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM A965/A965M-06a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A739-90a(2022) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM A739-90a(2016) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM F68-16 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
ASTM D1349-99 Standard Practice for Rubber-Standard Temperatures For Testing
ASTM D1349-99(2005) Standard Practice for Rubber-Standard Temperatures for Testing
ASTM A739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM D6176-97(2015) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM F2362-03 Standard Specification for Temperature Monitoring Equipment
ASTM D957-95(2000)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM A352/A352M-06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM C1046-95(2021) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E1112-00(2018) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM E1112-00 Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM F2362-03(2013) Standard Specification for Temperature Monitoring Equipment
ASTM C1046-95 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM A352/A352M-06 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
ASTM C829-81(2010) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM D1349-07 Standard Practice for Rubber-Standard Temperatures for Testing
ASTM D6176M-97 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
ASTM C1057-12 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM F1316-90(2013) Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM D5527-00(2002)e1 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
ASTM E344-12 Terminology Relating to Thermometry and Hydrometry
ASTM D5527-00(2007) Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
ASTM D6604-00(2009)e1 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM C829-81(2015) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM C829-81(2022) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM E825-98(2023) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM A1091/A1091M-16 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM E2995-15a Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
ASTM E825-98(2016) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM D7779-11(2015) Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM F2362-03(2024) Standard Specification for Temperature Monitoring Equipment
ASTM F2362-03(2019) Standard Specification for Temperature Monitoring Equipment
ASTM D957-12 Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM F706-96(2011) Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
ASTM D4311-96 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D4311/D4311M-15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D5527-23 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
ASTM A989/A989M-15 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-15a Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988-98 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM E337-15(2023) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM A989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-15 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM E170-14a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-15a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E2264-05(2013) Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM E170-99e1 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E2264-05 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM E2264-05(2021) Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM C1421-16 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM A278/A278M-01(2015) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
ASTM A989/A989M-23 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM E344-01 Terminology Relating to Thermometry and Hydrometry
ASTM C1421-18 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E2995-15a(2020) Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM E2251-03a Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM E344-01a Terminology Relating to Thermometry and Hydrometry
ASTM E2251-03 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM A989/A989M-13 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-23 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM F3637-23 Standard Guide for Additive Manufacturing of Metal — Finished Part Properties — Methods for Relative Density Measurement
ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
ASTM E377-08(2020) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM D7735-11e1 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D4414-95(2007) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM D4414-95(2013) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D957-06 Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E2264-23 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM D957-95(2006)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM D4311/D4311M-21 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM E2602-24 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM A989/A989M-18 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM E1299-96 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E1299-96(2016) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM A988/A988M-13 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM F2732-23 Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
ASTM D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM A989-98 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E1299-96(2023) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM D6604-00(2022) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
ASTM D7962-16 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
ASTM D7962-15a Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
ASTM D1142-95(2000) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
ASTM D7962-21 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
ASTM D2454-14 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D7211-13 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
ASTM E879-01(2007) Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
ASTM A571/A571M-01(2006) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
ASTM D2454-95(2002) Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D4490-96(2006)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D2454-08 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM C829-81(1995)e1 Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM D7211-06 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
ASTM D4490-96(2011) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-23 Red Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors (Standard + Redline PDF Bundle)
ASTM E879-01 Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
ASTM E879-93 Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
ASTM C829-81(2000) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
ASTM E879-12 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
ASTM B934-15 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM A319-71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
ASTM D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-96(2001)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D8377-21 Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D7211-05 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM F733-19 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2362-03(2009) Standard Specification for Temperature Monitoring Equipment
ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D1142-95(2006) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM A962/A962M-04 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM D1212-91(2007)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E1104-98(2009) Standard Specification for Clinical Thermometer Probe Covers and Sheaths
ASTM A962/A962M-09 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM D1212-91 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E2251-14(2021) Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D1212-91(2020) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM F1199-21 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150��F Maximum)
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D1814-70(2005) Standard Test Method for Measuring Thickness of Leather Units
ASTM D1212-91(2001) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2013) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D5527-00(2011) Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
ASTM D6011-96(2003) Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
ASTM D8126-17 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
ASTM E1932-12(2017) Standard Guide for Acoustic Emission Examination of Small Parts
ASTM D1814-70(2010) Standard Test Method for Measuring Thickness of Leather Units
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E2623-08 Standard Practice for Reporting Temperature Calibrations
ASTM D1212-91(1996)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D7138-07 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
ASTM D7138-16 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
ASTM D7962-15 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
ASTM D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM E208-20e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM D6011-96 Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D1142-95(2012) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D5919-96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D7962-17 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift

Association Francaise de Normalisation

NF EN ISO 15530-3:2011 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Technique for determining measurement uncertainty - Part 3: use of calibrated parts or measurement standards
FD X07-028:2002 Metrology - Calibration and verification procedure for thermometers - Estimation of the uncertainties on temperature measurements
NF EN 60682/A2:1998 Standard method for measuring pinch temperature of tungsten-halogen-quartz lamps
NF EN 60682:1994 Standard method for measuring pinch temperature of tungsten-halogen-quartz lamps
NF T46-009:1973 Determination of tension set under constant elongation of vulcanized elastomers at normal and elevated temperatures.
NF E29-005:1991 Industrial pipework. Pressure/temperature ratios of standardize steel components. Values and validity limitations.
NF E11-160-3*NF EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards
NF C20-051:1985 Guide for the specification of permissible temperatures and temperature-rises for parts of electrical equipment,in particular for terminals.
NF C72-104*NF EN 60682:1994 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps.
NF EN ISO 14253-2:2011 Geometrical Product Specification (GPS) - Verification by measurement of parts and measuring equipment - Part 2: guidelines for the estimation of uncertainty in GPS measurements, in the calibration of measuring equipment...
NF E11-012:1992 Length measuring instruments. Plain plug standard gauges and standard discs.

American National Standards Institute （ANSI)

ANSI/ASHRAE 41.1-2020 Standard Methods for Temperature Measurement
ANSI/ASHRAE 41.1-2013 Standard Method for Temperature Measurement
ANSI/ASHRAE 41.1-2020 add a-2022 ANSI/ASHRAE Addendum a to ANSI/ASHRAE Standard 41.1-2020 Standard Methods for Temperature Measurements
ANSI/ASHRAE 41.1-2020 errata 2022 ERRATA SHEET FOR ANSI/ASHRAE STANDARD 41.1-2020 Standard Methods for Temperature Measurement
ANSI/BOMA Z65.5-2010 Retail Buildings: Standard Methods of Measurement
ANSI/IEC C78.682:1997 Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps
ANSI/ASTM D6259:2015 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.1-1986 Standard Method for Temperature Measurement
ASHRAE 41.1-2013 Standard Method for Temperature Measurement

(U.S.) Ford Automotive Standards

FORD FLTM EU-BA 050-02-2000 DETERMINATION OF EFFECTIVE CASE DEPTH OF CASE HARDENED COMPONENTS

HU-MSZT

MNOSZ 15810-1955 Temperature measurement. technical standard
MSZ 2664-1966 Forgeable Chromium Steel Quality and Technical Standards in Parts

RO-ASRO

STAS 1033-1968 Length measurement. Standard reference temperature
STAS 7170-1987 Metrology STANDARDIZED BLOCKS FOR HARDNliSS DKTER.MINATION Technical and meltrologycal requirements Calibralion
STAS 8078-1986 RUBBER Standard temperatures, humidities and endurance for conditioning and testing of test pieces

SE-SIS

SIS SS-ISO 1:1979 Standard reference temperature for industrial length measurements
SIS SEN 43 71 00-1975 Magnetic materials and components. Survey of standards. International recommendations' validity as Swedish standard

International Organization for Standardization (ISO)

ISO 1:1975 Standard reference temperature for industrial length measurements
ISO/R 1:1951 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards

Danish Standards Foundation

DS/ISO 1:1980 Standard reference temperature for industrial length measurements
DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards

TR-TSE

TS 186-1965 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS

Korean Agency for Technology and Standards (KATS)

KS D 0285-2015(2020) Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS B 6226-2001(2021) Standard conditions of rating temperaturefor refrigerating compressors
KS B 6226-2001(2016) Standard conditions of rating temperaturefor refrigerating compressors
KS B 6226-2021 Standard conditions of rating temperature for refrigerating compressors
KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS D 0285-2020 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels

VDI - Verein Deutscher Ingenieure

VDI/VDE 5585 BLATT 1 BERICHTIGUNG-2018 Technische Temperaturmessung - Temperaturmessung mit Thermografiekameras - Messtechnische Charakterisierung - Berichtigung zur Richtlinie VDI 5585 Blatt 1:2018-03
VDI/VDE 3511 Blatt 4.4-2004 Technische Temperaturmessungen - Strahlungsthermometrie - Kalibrierung von Strahlungsthermometern
VDI/VDE 3511 Blatt 4.3-2004 Technische Temperaturmessungen - Strahlungsthermometrie - Standard-Test-Methoden fuer Strahlungsthermometer mit einem Wellenlaengenbereich
VDI/VDE 3512 BLATT 2-2014 Temperature measurement for building automation - Temperature sensors@ temperature sensing elements and their measurement parameters
VDI/VDE 2629 BLATT 2-2019 Accuracy of contour-measuring systems - Characteristics and their testing - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI/VDE 2629 Blatt 2-2008 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI/VDE 3511 Blatt 4.2-2000 Technische Temperaturmessungen - Ergaenzungen - Erhaltung der Spezifikation von Strahlungsthermometern

GSO

BH GSO ASTM C1046:2023 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
GSO ASTM C1046:2022 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
GSO ASTM E1112:2023 Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
BH GSO ASTM E1112:2023 Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
GSO IEC 60682:2015 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamp
OS GSO ISO 15530-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards
BH GSO IEC 60682:2016 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamp
GSO ISO 29472:2013 Thermal insulating products for building applications -- Determination of dimensional stability under specified temperature and humidity conditions
BH GSO ASTM E1299:2023 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
BH GSO ASTM D2983:2012 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
GSO ASTM D240:2009 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
OS GSO ASTM D2983:2011 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
OS GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
BH GSO ASTM D5133:2017 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
GSO ASTM E1299:2023 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

YU-JUS

JUS M.A0.001-1978 Standard reference temperature for industrial length measurements
JUS U.J5.150-1983 Elsctrical temperatule mennring.lntruments calibration tables of resistance elements for resistance thermometres

API - American Petroleum Institute

API MPMS 7.4-2018 Manual of Petroleum Measurement Standards Chapter 7-Temperature Determination Section 4-Dynamic Temperature Measurement (SECOND EDITION)
API MPMS 7.2-1995 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 2 - Dynamic Temperature Determination (Second Edition)
API MPMS 7.4-1993 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers
API MPMS 7.1-2017 Manual of Petroleum Measurement Standards@ Chapter 7.1 Temperature Determination - Liquid-in-Glass Thermometers (SECOND EDITION)
API MPMS 7-2001 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination (First Edition)
API MPMS 7.3-1985 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers (First Edition)
API MPMS 7.1-1991 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 1 - Static Temperature Determination Using Mercury-in-Glass Tank Thermometers (First Edition; Supersedes STD 2543)
API MPMS 7.3-2011 Manual of Petroleum Measurement Standards Chapter 7.3 Temperature Determination-Fixed Automatic Tank Temperature Systems (SECOND EDITION)
API MPMS 7.2-2018 Manual of Petroleum Measurement Standards Chapter 7-Temperature Determination Section 2-Portable Electronic Thermometers (Third Edition)

Indonesia Standards

SNI 06-6400-2000 Methods for determination of asphalt volume correction to volume at standard temperature
SNI 19-6421-2000 Standard specification of thermometers

AENOR

UNE-EN 60360:1999 STANDARD METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE.
UNE-EN 60682:1996 STANDARD METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ-TUNGSTEN-HALOGEN LAMPS.

RU-GOST R

GOST IEC 60360-2012 Standard method of measurement of lamp cap temperature rise
GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method

PL-PKN

PN E04030-1992 Standard method of measurement of lamp cap temperature rise

IT-UNI

UNI 314-1970 Benchmark standard temperature for industrial length measurement

IEC - International Electrotechnical Commission

PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)

Japanese Industrial Standards Committee (JISC)

JIS B 8600:2021 Standard condition of rating temperature for refrigerant compressors
JIS B 8600:2001 Standard conditions of rating temperature for refrigerant compressors
JIS K 2249:1995 Crude petroleum and petroleum products -- Determination of density and petroleum measurement tables based on a reference temperature (15 centigrade degrees)
JIS E 3020:1981 Change of temperature testing method for parts of railway signaling
JIS Z 8705 AMD 1:2006 Method of temperature measurement by liquid-in-glass thermometers (Amendment 1)

International Electrotechnical Commission (IEC)

IEC 60682:1980/AMD2:1997 Amendment 2 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60360/AMD2:1996 Standard method of measurement of lamp cap temperature rise; Amendment 2
IEC 60682:1980 Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps

IN-BIS

IS 6500-1972 Specification for thermometers for measuring sea surface temperature

German Institute for Standardization

DIN 43764:1986 Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units
DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN ISO/TS 15530-3:2008 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004); German version CEN ISO/TS 15530-3:2007
DIN EN 60682:1994 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993
DIN EN ISO 15530-3:2018 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)

European Committee for Standardization (CEN)

CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
EN ISO 8222:2020/prA1:2021 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1: Correction of two typographical errors (ISO 8222:2020/DAmd 1:2021)

AT-ON

ONORM M 5800-1955 Temperature measurement. general concept provisions

KR-KS

KS C IEC 60294-2003(2023) Dimension measurement of cylindrical parts with opposite terminals
KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards

Electronic Components, Assemblies and Materials Association

ECA EIA_ECCB-952-2004 Standard for Plans to Determine Lead Content of Electronic Components and Related Equipment

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD33B-2004 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line

PK-PSQCA

PS 124-1960 PAKISTAN STANDARD SPECIFICATION FOR THE DETERMINATION OF LENGTH OFWOVEN OR KNITTED FABRICS (AT ZERO TENSION)
PS 125-1960 PAKISTAN STANDARD SPECIFICATION FOR THE DETERMINATION OF WIDTH OF WOVEN OR KNITTED FABRICS (WHEN RELAXED AT ZERO TENSION)

Association of German Mechanical Engineers

VDI/VDE 3512 Blatt 2-2009 Temperature measurements for building automation - Temperatur sensors, temperature sensing elements and their measurements parameters
VDI/VDE 3511 Blatt 4.2-2002 Temperature measurement in industry - Maintenance of the specification for radiation thermometers

CZ-CSN

CSN 13 3060 Za-1988 Czech national standard 13 3060. Part 2: Industrial parts. Supplementary technical regulations. Inspection of parts
CSN 13 3060 Za-1989 Czech national standard 13 3060. Part 2: Industrial parts. Supplementary technical regulations. Inspection of parts

Instrument Society of America (ISA)

ISA 71.01-1985 Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity

BE-NBN

NBN-EN 60682-1994 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

British Standards Institution (BSI)

BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards

Lithuanian Standards Office

LST EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)

Society of Automotive Engineers (SAE)

SAE J2236-2023 Standard Method for Determining Continuous Upper Temperature Limit of Elastomers

American Petroleum Institute (API)

API MPMS 7.2 ERTA 1-2021 Manual of Petroleum Measurement Standards Chapter 7—Temperature Determination Section 2—Portable Electronic Thermometers (Third Edition)

The American Road & Transportation Builders Association

AASHTO T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

CH-SNV

SN 198 525-1990 Testing of Textiles: Testing of Pilling-Resistance

GOST

GOST 18995.5-2022 Organic chemical products. Methods for determination of solidification point

Others: