Product size error

Product size error, Total:405 items.

The international standard classification for "Product size error" includes: Aircraft and space vehicles in general , Ceramic products , Abrasives , Rubber and plastics products in general , Welding consumables , Limits and fits , Mechanical engineering drawings , Watches .

The Chinese standard classification for "Product size error" includes: Basic standards and general methods , Daily use ceramics products , Grinding material and apparatus , Rubber seal , Welding and cutting , Basic standards and general methods , Microcircuit in general , Measuring tool and instrument , Office supplies and office implements , Horology .

Professional Standard - Aerospace

QJ 3194-2004 The measurement method for roundness of large dimension

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3301-2023 Test method for determination of specification allowance and size of defects of domestic ceramic ware
GB/T 3672.1-2002 Rubber--Tolerances of products--Part 1:Dimensional tolerances
GB/Z 24638-2009 Geometrical Product Specifications (GPS)—Linear and angular dimensioning and tolerancing:+/-limit specifications—Step dimensions,distances,angular sizes and radii
GB/T 16892-2022 Geometrical product specifications (GPS)—Dimensioning and tolerancing—Non-rigid parts
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 19325-2003 Coated abrasive products―Dimensional tolerances on non-STANDARD conversions
GB/T 25775-2010 Technical delivery conditions for welding consumables - Type of product dimensions tolerances and markings

Professional Standard - Railway

TB 347-1985 Limit deviation of communication signal products without tolerance dimensions

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38762.3-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 3:Angular sizes
GB/T 38762.1-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 1:Linear sizes
GB/T 40742.4-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone
GB/T 38762.2-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 2:Dimensions other than linear or angular sizes

Professional Standard - Machinery

JB/T 10744-2007 Coated abrasive products-Dimensional tolerances on non-standard conversions
JB/T 10590-2006 Coated abrasive products -- Dimensional tolerances on non-standard conversions

Professional Standard - Aviation

HB 5522-1980 Dimensional tolerances for molded rubber products

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1825-2016 Regulations on tolerances for jewelry size measurement

Professional Standard - Education

JY 0027-1993 The limit errors without tolerance indication on drawings and technical documents for educational equipment

Professional Standard - Light Industry

QB/T 4521-2013 Tolerances for watch linear dimensions up to 3mm without individual tolerance indications

BE-NBN

NBN 268-1953 Dimensions and errors of copper products and copper alloy products used daily, and forged products
NBN-ISO 3302:1994 Rubber. Dimensional tolerances for use with products
NBN T 31-013-1979 Rubber - Dimensional tolerances of solid moulded and extruded products
NBN E 03-004-1986 Thread processing. Metric Triangular ISO Dimensions, Limits and Tolerances
NBN B 15-236-1983 Formed concrete testing. Dimensions and tolerances of cast test tubes
NBN 602-1962 Size difference. No tolerance

Korean Agency for Technology and Standards (KATS)

KS M ISO 3302-1:2008 Rubber－Tolerances for products－Part 1：Dimensional tolerances
KS M ISO 3302-1-2023 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1:2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B ISO 14405-1:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 3040:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS D ISO 16162-2013 Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS D ISO 16160:2005 Continuously hot-rolled steel sheet products-Dimensional and shape tolerances
KS D ISO 16160-2013 Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS D ISO 16160:2013 Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS B 0417-2014(2019) Permissible deviations in dimensions without tolerance indication for metallic sintered products
KS D ISO 16163-2020 Continuously hot-dipped coated steel sheet products－Dimensional and shape tolerances
KS D ISO 16160-2005(2010) Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS B ISO 3040:2016 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS D ISO 16162-2005(2010) Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS B ISO 3040:2014 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS D ISO 16163-2015(2020) Continuously hot-dipped coated steel sheet products－Dimensional and shape tolerances
KS B ISO 10579:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS D ISO 16162:2005 Continuously cold-rolled steel sheet products-Dimensional and shape tolerances
KS D ISO 16162:2013 Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS B 0236-1989 Permissible Deviation in Dimensions without Tolerance Indication of dimensions
KS B ISO 10579:2014 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 10579:2009 Technical drawings-Dimensioning and tolerancing-Non-rigid parts
KS B ISO 2538-2:2016 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
KS D ISO 16163:2004 Continuously hot-dipped coated steel sheet products-Dimensional and shape tolerances
KS D ISO 16163:2015 Continuously hot-dipped coated steel sheet products-Dimensional and shape tolerances
KS B ISO 2538-2:2021 Geometrical product specifications(GPS) — Wedges —Part 2: Dimensioning and tolerancing
KS B ISO 16570:2013 Geometrical Product Specifications(GPS)-Linear and angular dimensioning and tolerancing:+/-limit specifications-Step dimensions, distances, angular sizes and radii
KS B ISO 16570-2006(2011) Geometrical Product Specifications(GPS)－Linear and angular dimensioning and tolerancing：＋/－limit specifications－Step dimensions, distances, angular sizes and radii
KS B 0413-2001 General dimensional tolerances for parts formed by press working from sheet metal
KS B 0413-2014 General dimensional tolerances for parts formed by press working from sheet metal

American National Standards Institute （ANSI)

ANSI H35.2-2009 Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2017 Dimensional Tolerances for Aluminum Mill Products (Metric)
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2006 Dimensional Tolerances for Aluminum Mill Products (Metric)
ANSI H35.2-2017 American National Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2009 American National Standard Dimensional Tolerances for Aluminum Mill Products, 2009
ANSI B4.3-1978 General Tolerances for Metric Dimensioned Products
ANSI H35.2-2006 Dimensional Tolerances for Aluminum Mill Products

The Aluminum Association

AA H35.2(M)-2009 Dimensional Tolerances for Aluminum Mill Products [Superseded: SAE MAM 2202C, SAE MAM 2202B, SAE MAM 2204C, SAE MAM 2204B]
AA H35.2-2009 Dimensional Tolerances for Aluminum Mill Products
AA H35.2(M)-2003 Dimensional Tolerances for Aluminum Mill Products
AA H35.2-2003 Dimensional Tolerances for Aluminum Mill Products
AA ANSI H35.2(M)-2013 Dimensional Tolerances for Aluminum Mill Products

British Standards Institution (BSI)

BS EN ISO 14405-1:2016 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS ISO 3302-1:2014 Rubber. Tolerances for products. Dimensional tolerances
BS 3734-1:1997 Rubber. Tolerances for products. Dimensional tolerances
BS EN 10278:1999 Dimensions and tolerances of bright steel products
BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-2:2019 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear or angular sizes
24/30463912 DC Geometrical product specifications (GPS) — Dimensional tolerancing - Part 1: Linear sizes
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
BS 7007-3:1988 Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
BS ISO 129-5:2018 Technical product documentation. Indication of dimensions and tolerances - Dimensioning of structural metal work
BS ISO 16160:2012 Hot-rolled steel sheet products. Dimensional and shape tolerances
BS 7007-5:1994 Abrasive products - Specification for dimensions, tolerances and designation of abrasive belts
BS ISO 3040:2010 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS ISO 129-4:2013 Technical product documentation (TPD). Indication of dimensions and tolerances. Dimensioning of shipbuilding drawings
BS EN ISO 3040:2012 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing
17/30358444 DC BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing - Part 2. Dimensions other than linear sizes
BS 7007-6:1994 Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
BS EN ISO 8062-3:2023 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
BS ISO 16163:2012 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS ISO 16162:2012 Cold-rolled steel sheet products. Dimensional and shape tolerances
BS EN ISO 10579:2013 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
BS ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non - rigid parts
BS EN ISO 129-1:2019+A1:2021 Technical product documentation (TPD). Presentation of dimensions and tolerances - General principles
BS EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Basis of tolerances, deviations and fits
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
BS ISO 3096:2018 Rolling bearings. Needle rollers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values

Indonesia Standards

SNI 05-2639-1992 Permissible deviation without tolerance indication for die casting

SCC

DANSK DS/EN 10278:2002 Dimensions and tolerances of bright steel products
NS-EN 10278:1999 Dimensions and tolerances of bright steel products
DANSK DS/ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
AENOR UNE-EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
DIN 862 E:2014 Draft Document - Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN EN ISO 14405 E:2006 Draft Document - Geometrical Product Specification (GPS) - Dimensional Tolerancing - Linear Sizes (ISO/DIS 14405:2006); German version prEN ISO 14405:2006
13/30278121 DC BS ISO 3302-1. Rubber. Tolerances for products. Part 1. Dimensional tolerances
BS ISO 16162:2005 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2010 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
NS-EN ISO 14405-2:2011 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
ISO 14405-2:2011/DAmd 1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes — Amendment 1
BS ISO 16160:2011 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2005 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
DANSK DS/EN ISO 14405-1:2016 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes (ISO 14405-1:2016)
DIN ISO 3302-1 E:2016 Draft Document - Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014); Text in German and English
NS-EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
AENOR UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
NS-EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
DANSK DS/EN ISO 14405-3:2017 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 3: Angular sizes (ISO 14405-3:2016)
NS-EN ISO 14405-1:2010 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes (ISO 14405-1:2010)
ISO 14405-1:2010/DAmd 1 Geometrical product specifications (GPS) — Dimensional tolerance — Part 1: Linear sizes — Amendment 1
DANSK DS/EN ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
12/30250143 DC BS ISO 16160. Hot-rolled steel sheet products. Dimensional and shape tolerances
11/30250122 DC BS ISO 16162. Cold-rolled steel sheet products. Dimensional and shape tolerances
DANSK DS/EN ISO 14405-2:2019 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
BS ISO 16163:2010 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
NS-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
BS ISO 16163:2005 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
DIN EN ISO 14405-3 E:2013 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO/DIS 14405-3:2013); German version prEN ISO 14405-3:2013
DIN EN ISO 14405-1 E:2014 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2013); German version prEN ISO 14405-1:2013
10/30207386 DC BS ISO 16160. Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 3040:2009 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
10/30207389 DC BS ISO 16162. Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
ISO 3040:2009/DAmd 1.2 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones — Amendment 1
DANSK DS/ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
12/30246960 DC BS EN ISO 2538-2. Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing
DANSK DS/EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
DIN EN ISO 14405-2 E:2018 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO/FDIS 14405-2:2018); German and English version prEN ISO 14405-2:2018
NS-EN ISO 3040:2016 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones (ISO 3040:2016)
DANSK DS/EN ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
BS ISO 129-1:2018 Technical product documentation (TPD). Presentation of dimensions and tolerances-General principles
BS EN ISO 129-1:2019 Technical product documentation (TPD). Presentation of dimensions and tolerances-General principles
DIN EN ISO 3040 E:2011 Draft Document - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version FprEN ISO 3040:2011
DANSK DS/ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
NS-EN ISO 3040:2012 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones (ISO 3040:2009)
DANSK DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
AENOR UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
NS-EN ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
DIN EN 10278 E:2022 Draft Document - Dimensions and tolerances of bright stainless and other cold drawn steel products; German and English version prEN 10278:2022
11/30250125 DC BS ISO 16163. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
DANSK DS/EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
DANSK DS/EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
10/30207392 DC BS ISO 16163. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
AENOR UNE-EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
DIN EN ISO 14405-2/A1 E:2017 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes - Amendment 1 (ISO 14405-2:2011/DAM 1:2017); German and English version EN ISO 14405-2:2011/prA1:2017
NS-EN 10218-2:2012 Steel wire and wire products — General — Part 2: Wire dimensions and tolerances
BS PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts-Rules

American Society of Mechanical Engineers (ASME)

ASME B4.3-1978 General tolerances for metric dimensioned products
ASME B4.3-1978(R2004) General Tolerances for Metric Dimensioned Products
ASME Y14.5M-1973 Dimensioning and Tolerancing
ASME Y14.5-1966 Dimensioning and Tolerancing
ASME Y14.5 (SPANISH)-2009 Dimensiones y Tolerancias

European Committee for Standardization (CEN)

EN 10278:1999 Dimensions and tolerances of bright steel products
EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN ISO 286-1:2010/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)

HU-MSZT

MSZ 7255-1960 Dimensional error of hot hard extruded plastic products
MSZ 329-1984 Hot-rolled ribbed, gap-generated L-shaped steel plate size

German Institute for Standardization

DIN EN 10278:1999 Dimensions and tolerances of bright steel products; German version EN 10278:1999
DIN 7715-40:1998 Rubber products - Dimmensional tolerances; hoses
DIN ISO 3302-1:2018E Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN ISO 3302-1 E:2016-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN 862 E:2011-10 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2013-02 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862:2015-03 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2014-06 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2005-12 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
DIN EN ISO 14405-1:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
DIN EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version EN ISO 3040:2012
DIN ISO 3302-1:1999 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014)
DIN EN ISO 3040:2016-12 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016); German version EN ISO 3040:2016
DIN EN ISO 14405-2:2019-06 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018); German version EN ISO 14405-2:2019
DIN 59200:2001-05 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass / Note: To be replaced by DIN EN 10058 (2017-09).
DIN 59200:2001 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN EN ISO 14405-3:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016); German version EN ISO 14405-3:2017
DIN EN ISO 14405-1 E:2014-01 Geometric Product Specification (GPS) Dimensional Specifications Tolerances Part 1: Linear Dimensions (Draft)
DIN 59200:1975 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN 59200:1959 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN 509:2022 Technical product documentation - Relief grooves - Types, dimensions and tolerances
DIN 7715-5:1979-11 Rubber products; dimensional tolerances, rubber sheets and products made from sheets
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN EN ISO 14405-2 E:2018-09 Technical Product Specification (GPS) Dimensional Tolerances Part 2: Dimensions other than Linear Dimensions (Draft)
DIN EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
DIN EN ISO 10579:2013-11 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011); German version EN ISO 10579:2013
DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014); German version EN ISO 2538-2:2014
DIN EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ？ tolerances for indicated dimensions (ISO 8062-3...
DIN 863-1:2017 Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors
DIN EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218-2:2012
DIN EN 10218-2:2012-03 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218-2:2012
DIN EN ISO 286-1:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN EN 10218-2:1996 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218-2:1996
DIN EN ISO 8062-3:2008 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
DIN 8000:1962-10 Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms
DIN 32561:2012-10 Production equipment for microsystems - Tray - Dimensions and tolerances
DIN 7715-1:1977 Rubber products; dimensional tolerances, ebonite products
DIN 7715-1 Rubber products; dimensional tolerances, ebonite products

IT-UNI

UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 5681-1973 Hot rolled steel finished products. T sections with sharp edges. Dimensions and tolerances.
UNI 7226-P3-1989 Technical drawings. Geometric error sign. Symbols and dimensioning of contour deviations
UNI 6012-1974 Hot rolled steel products 0. General purpose steel bars 19. Dimensions and deviations
UNI 5679-1973 Hot rolled steel finished products. Ipn beams. Dimensions and tolerances.
UNI 5680-1973 Hot-rolled steel finished product UPN2) beam. Dimensions and deviations
UNI ISO 7083:1986 Technical drawings. Geometric errors are explained using graphic symbols. proportions and dimensions
UNI 5415-1964 Elastic materials: finished products, stamped parts, dimensional deviations

Danish Standards Foundation

DS/ISO 3302-1/Amd. 1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/EN 10278:2002 Dimensions and tolerances of bright steel products
DS/EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
DS/EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
DS/ISO 3302:1984 Rubber. Dimensional tolerances of solid moulded and extruded products
DS/EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
DS/EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
DS 3014:1981 Wrought copper and copper alloys. Cold-rolled flat products delivered in straight lengths (sheet). Dimensions and tolerances
DS/EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances

South African Bureau of Standard

SANS 3302-1:2003 Rubber - Tolerances for products Part 1: Dimensional tolerances

GSO

BH GSO ISO 3302-1:2016 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
OS GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
BH GSO ISO 14405-3:2022 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
BH GSO ISO 14405-1:2017 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
OS GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
GSO ISO 14405-3:2021 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
BH GSO ISO 14405-2:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
OS GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
BH GSO ISO 16162:2016 Cold-rolled steel sheet products -- Dimensional and shape tolerances
GSO ISO 16162:2013 Cold-rolled steel sheet products -- Dimensional and shape tolerances
BH GSO ISO 16160:2016 Hot-rolled steel sheet products -- Dimensional and shape tolerances
GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
BH GSO ISO 3040:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
OS GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
GSO ISO 14405-2:2024 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ISO 22034-2:2013 Steel wire and wire products -- Part 2: Tolerances on wire dimension
BH GSO ISO 129-4:2017 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
OS GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
BH GSO ISO 10579:2023 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
GSO ISO 10579:2023 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
BH GSO ISO 2538-2:2017 Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing
GSO ISO 2538-2:2015 Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing

International Organization for Standardization (ISO)

ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 3302-1:1996 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 14405-2:2018 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO/CD 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO 3302-1:1996/Amd 1:2001 Rubber - Tolerances for products - Part 1: Dimensional tolerances; Amendment 1: Classification system for flash
ISO 10579:2010/Cor 1:2011 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts; Technical Corrigendum 1
ISO 3302:1990 Rubber; dimensional tolerances for use with products
ISO 3302 DAM 1:1991 Rubber; dimensional tolerances for use with products; amendment 1
ISO 16160:2012 Hot-rolled steel sheet products - Dimensional and shape tolerances
ISO 16160:2011 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
ISO 1206:2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
ISO 3040:2009 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 16162:2005 Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 16162:2010 Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
ISO 8062-3:2007/cor 1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings; Technical Corrigendum 1
ISO 16160:2005 Continuously hot-rolled steel sheet products - Dimensional and shape tolerances
ISO 16162:2000 Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 3096:1996/cor 1:1999 Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1
ISO 16163:2010 Continuously hot-dipped coated steel sheet products —Dimensional and shape tolerances
ISO 16162:2012 Cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 16163:2005 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
ISO 3302:1976/Amd 1:1983 Rubber — Dimensional tolerances of solid moulded and extruded products — Amendment 1
ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
ISO 129-5:2018 Technical product documentation - Indication of dimensions and tolerances- Part 5:Dimensioning of structural metal work
ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
ISO 16163:2000 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
ISO DIS 129-2:2013 Technical product documentation — Indication of dimensions and tolerances — Part 2: Dimensioning of mechanical engineering drawings
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: ? limit specifications - Step dimensions, distances, angular sizes and radii
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions
ISO 16163:2012 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
ISO 603-3:1999/cor 1:1999 Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding; Technical Corrigendum 1
ISO 603-7:1999/Cor 1:1999 Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding
ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
ISO 603-11:1999/Cor 1:1999 Bonded abrasive products - Dimensions - Part 11: Hand finishing sticks

Association Francaise de Normalisation

NF T47-001-1*NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1 : dimensional tolerances
NF ISO 3302-1:2014 Caoutchouc - Tolérances pour produits - Partie 1 : tolérances dimensionnelles
NF A47-461*NF EN 10278:1999 Dimensions and tolerances of bright steel products
NF E04-563-3*NF EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
NF EN ISO 14405-3:2017 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 3 : tailles angulaires
NF EN ISO 14405-1:2016 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1 : tailles linéaires
NF EN 10278:1999 Dimensions et tolérances des produits en acier transformé à froid
NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
NF E04-563-1*NF EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
NF A45-007:1983 IRON AND STEEL. SMALL HOT ROLLED U IRON BARS. DIMENSIONS AND TOLERANCES.
NF EN ISO 14405-2:2019 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 2 : dimensions autres que tailles linéaires ou angulaires
NF A47-401:1992 Cold formed steel products - Drawn bar - Dimensions and tolerances
NF E04-557:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones.
NF E04-557*NF EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
NF EN ISO 3040:2016 Spécification géométrique des produits (GPS) - Cotation et tolérancement - Cônes
NF A45-007:2021 Produits sidérurgiques - Petits fers en U laminés à chaud - Dimensions et tolérances
NF EN ISO 10579:2013 Spécification géométrique des produits (GPS) - Cotation et tolérancement - Pièces non rigides
NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
NF A32-013:1985 Foundry products. Malleable and spheroidal graphite cast iron products. Dimensional tolerances for sand castings.
NF EN ISO 2538-2:2014 Spécification géométrique des produits (GPS) - Coins - Partie 2 : cotation et tolérancement
NF E02-352:1999 Geometrical product specifications (GPS). Cutted and bended workpieces. Dimensional and geometrical tolerances for dimensions and features without individual tolerances.
NF E02-353:2001 Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances.
NF ISO 3096:2018 Bearings - Needles - Overall dimensions, geometric product specification (GPS) and tolerance values
NF EN 10218-2:2012 Fils et produits tréfilés en acier - Généralités - Partie 2 : dimensions et tolérances des fils
NF E01-012-2*NF EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2 : dimensioning and tolerancing
NF A55-411:1987 Semi-finished products made of lead. Tubes. Dimensions and tolerances.
NF A65-767:1981 Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.
NF E04-565*NF EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
NF E22-383*NF ISO 3096:2018 Rolling bearings - Needle rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
NF E02-100-1*NF EN ISO 286-1:2010 Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits.

KR-KS

KS M ISO 3302-1-2018(2023) Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B ISO 14405-1-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 3040-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 10579-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 2538-2-2016 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
KS B ISO 2538-2-2021 Geometrical product specifications(GPS) — Wedges —Part 2: Dimensioning and tolerancing

Lithuanian Standards Office

LST EN 10278-2000 Dimensions and tolerances of bright steel products
LST EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
LST EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
LST EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
LST EN 10218-2-2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances

Spanish Association for Standardization (UNE)

UNE-EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-EN 10278:2003 ERRATUM DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-ISO 3302-1:2023 Rubber. Tolerances for products. Part 1. Dimensional tolerances
UNE 53508-1:2001 Rubber. Tolerances for products. Part 1: Dimensional tolerances.
UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
UNE 36549:1981 STEEL PRODUCTS. SECTIONS FOR SHIPBUILDING. DIMENSIONS AND TOLERANCES
UNE-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
UNE-EN ISO 14405-1:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
UNE-EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
UNE-EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:...

CZ-CSN

CSN ISO 3302:1993 Rubber. Dimensional tolerances for use with products
CSN 72 6028-1993 Shape and dimension tolerances and tolerances of external defects of ceramic products
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
CSN 63 0100-1978 Dimensional tolerances of technical rubber goods

AT-ON

ONORM C 9410 Teil.1-1980 Rubber products; dimensional tolerances; ebonite products
ONORM C 9410-3-1994 Rubber products - Dimensional tolerances - Extruded rubber (elastomeric) products
ONORM C 9410-2-1994 Rubber products - Dimensional tolerances - Moulded rubber (elastomeric) products
ONORM C 9410-4-1994 Rubber products - Dimensional tolerances - Hoses
ONORM C 9410-5-1994 Rubber products - Dimensional tolerances - Soft rubber sheets and products made from sheets (elastomers)

DIN

DIN 862:2015 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN EN 10278:2024 Dimensions and tolerances of bright steel products of stainless and other special steels; German version EN 10278:2023

RU-GOST R

GOST 26214-1984 Products of wood and wooden materials. Permissible errors in measuring linear dimensions
GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

Japanese Industrial Standards Committee (JISC)

JIS B 0420-1:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
JIS B 0411:1978 Permissible deviations in dimensions without tolerance indication for metallic sintered products
JIS G 3192:2005 Dimensions, mass and permissible variations of hot rolled steel sections
JIS B 0028:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
JIS G 3192:2008 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
JIS G 3192:1994 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192:2014 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192 ERRATUM 1:2000 Dimensions, moss and permissible variations of hot rolled steel sections (Erratum 1)
JIS G 3193:2005 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS G 3192:2021 Dimensions, shape, mass and permissible variations of hot rolled steel sections
JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil
JIS G 3193:2008 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS Z 8318:2013 Technical product documentation (TPD) -- Indication method of tolerances for linear and angular dimensions
JIS B 0615-2:2017 Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing

PL-PKN

PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations
PN E06306-1986 Products of ceramic insulating materials Deviations of dimensions, form and position

VN-TCVN

TCVN 2262-1977 Permitted errors when measuring dimensions up to 500 mm
TCVN 7574-2006 Continuously cold-rolled steel sheet products.Dimensional and shape tolerances
TCVN 7573-2006 Continuously hot-rolled steel sheet products.Dimensional and shape tolerances
TCVN 3710-1981 Aquatic products.Errors in chemical tests
TCVN 260-2008 Geometrical Product Specifications(GPS).Linear and angular dimensioning and tolerancing:+/- limit specifications.Step dimensions,distances,angular sizes and radii

IN-BIS

IS 3739-1972 Dimensional tolerances for carbon and alloy structural steel products

CEN - European Committee for Standardization

EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes

SE-SIS

SIS SS-EN 10 131-1992 Cold rolled uncoated low carbon and high yield strength steel flat products for cold forming — Tolerances on dimensions and shape

CH-SNV

VSM 18080.1-1971 Aluminum and aluminum alloys. Forged products, extruded profiles. Dimensional tolerance
SN 165 000-1988 Solar Energy: Terminology and Definitions
SN 234 311-1978 Stopvalves for water supply in buildings
VSM 18687.1-1964 Aluminum and aluminum alloys. Forged Products, Cold Pressed Plate Dimensions and Tolerances
VSM 34403-1974 Nominal dimensions, tolerances, dimensions, extreme dimensions
VSM 15520-1973 Aluminum and aluminum alloys. Forged products, general drawn wire. Dimensions and tolerances

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4533:1998 Coated Abrasive Products - Dimensional Tolerances on Non-Standard Conversions (ISO 8366: 1987)

(U.S.) Ford Automotive Standards

FORD D-1-2011 DIMENSIONING AND TOLERANCING